1 - Chinavasion



Wi-Fi Doorbell

User's Manual

[pic]

Remarks：Software and hardware upgrades or parameter changes without notice.

Ⅰ: Product introduction

This product is a wireless WiFi Smart doorbell using P2P Technology，Can connect wireless router or direct netwo，Mobile phones and tablet PC（Android and IOS systems），After the door bell，Mobile phones and doorbell can real-time video and call，Unlock，Photograph, videotape.

This product has PIR alarm，Tamper alarm，Door alarm，Day and night monitoring，Local TF card video, The indoor doorbell ringing and other functions.

Ⅱ: Features

• Support IE EE802.11b/g/n wireless and wired net

• Mobile phones and tablets supporting Android and apple systems

• Support 32G TF Card

• 1M HD CMOS image sensor

• Support full duplex voice

• Support free P2P cloud log alarm information

• Support PIR human security

• Support anti tamper alarm

• Supports 5 users while viewing

• 720P HD video surveillance

• Support indoor doorbell ringing

 Ⅲ ：APP introduction

Android and IOS systems，Android to 360 mobile assistant search Wifiowl，IOS in App Store search Wifiowl，Can also scan the box on the two-dimensional code download ins。

Ⅳ ：Function keys and interface Ⅴ：product size

4.1：：Host function key note

[pic]

[pic]

Ⅵ：Magnetic，Music box and unlock device function description（optional）

6.1：Music box（optional）

[pic]

6.2：Magnetic（optional）

[pic]

6.3：Wireless unlocking receiving and remote controller（optional）

[pic]

[pic]

[pic]

Ⅶ：APP use introduction

Doorbell is connected to the power supply，Doorbell from the wireless router as far as possible not too far。Wired cable connection does not consider these issues.

7．1：Registration and login account

1：Open Wifiowl software，The first time to enter the login interface to first register an account，As follows，Click new user registration.

[pic]

2：Return to login interface after successful registration，Enter just email account and password，Click on the landing directly to the software to add the device interface.Remember to remember password when landing，The next landing will not show this page，Direct access to software, Some of Android's mobile phone registration will be successful after landing directly into the interface.

[pic]

7．2：Add the door bell

7.2.1：LAN add（Cable connection doorbell）

After entering the device list, click on the right + add device，Access device menu，Then click search LAN

[pic]

[pic]

[pic]

7.2.3：Intelligent connection（Doorbell does not need to connect the network cable）

[pic]

[pic]

[pic]

Note: Device online is necessary when setting.

7.3.1：Synchronize time

To Synchronize device time to cellphone time.

[pic]

7.3.3:Password for opening door

To set if password needed when video intercom & opening door.

Sliding to orange[pic] color means password needed. The default is 1234

Sliding to grey[pic] color means no need password.

Password is needed when setting opening door password.

Note: User in management interface can open the door when video intercom, or can not open door.

[pic]

[pic]

[pic]

7.3.7:Human Body Detection Alarm

Sliding to [pic]:On. When someone is in front of doorbell 1.5-3m, it starts alarm and send message to APP in set time.(this will explain later),Sliding to [pic]:Off

[pic]

7.3.8:Tamper alarm

Sliding to [pic]:On. When Remove doorbell, it alarms and send message to APP.Sliding to [pic]:Off

7.3.9:Local alarm

Sliding to [pic]:On. When local alarm is on, alarm sound time can choose 30s,45s,60s,Sliding to [pic]:Off

Note: When local alarm is On,doorbell starts alarm when there is human body detection or tampering and ends after setted time.

7.3.10:ID Card management: it is not applicable

7.3.11:Fingerprint management: it is not applicable

7.3.12:Reset

[pic]

[pic]

[pic]

7.3.15:“Local Playback”. This product no this function, does not support recording video stored in the phone memory card.

7.3.16:Equipment infomation

[pic]

7.3.17:Movement detection

Slid to [pic]: on. It trigger record video when there is movement in front of doorbell. (TF card needed), but not push message to APP.Slid to [pic]: off

7.3.18:User management

[pic]

[pic]

[pic]

[pic]

[pic]

7.6.2:Send message

Slide to[pic]: on.Click ”message delivery“Message will be sent to cellphone auto when visitor press doorbell under network circumstance.Slide to [pic] :Off. No picture included in message.

7.6.3:Ringing setting

[pic]

7.6.4：Sign out

To exit current account, back to log in interface.

7.6.5：Exit

App was exited and standby mode.Some models cell phone would send alarm & call message.Some not.We recommend not to exit if you would like to receive message under network.

7.7：Video conversation

 Ⅷ： Electrical parameters

|Features |description |

|camera |1/4 inch 100W pixels |

|Wireless wifi standard |IE EE 802.11b/g/n |

|Video resolution |720P MAX |

|Minimum illumination |2LUX |

|Infrared night vision distance |1.5—3 meter |

|Field of view |＞100 degree |

|Indoor doorbell receiving distance |＞8 meter |

|Indoor doorbell operating voltage |AC100—230V @50/60HZ |

|Wireless unlocking distance |Doorbell host> 5 meters, remote control (optional)> 8 meters, |

|PIR distance |1.5-3meters, the front angle＞30 degree |

|Doorbell power supply |12V/1A |

|Work power consumption |Maximum 5W |

|Wifi wireless distance |About 10-20 meters, depending on the work environment and wireless router power and mobile phone|

| |WIFI may be |

-----------------------

Camera

Infrared led

Speaker

Microphone

Photoresistor

AÿRedÿPIR induction effective indicator light

BÿblueÿPower light

CÿGreen and yellowÿCable network A：Red：PIR induction effective indicator light

B：blue：Power light

C：Green and yellow：Cable network connection indicator

Key and status indicator light

75MM

23.8MM

PIR sensor

TF CAR

Tamper alarm

12V +

-

Wireless indoor doorbell and remote control to unlock the

Reset，In the customer forgot the security password，Press and hold this button for more than 5 seconds after the boot,

Product will automatically restore to factory settings

last one and the next one

Code button / Volume button，Long press 3 seconds to the code，Green light flash，Adjust

green：Wireless work indicator，Slow flash standby，Flash to code，Often bright 1 second on the success of the code

blue：blue light flashes when the music rings

1：Magnetic induction face，Install two arrows against arrow，distance ”to set device.

Click “>”to device setting, Click the space area (small finger shows) for a few seconds to delete device.

Now you can set device specifications.

7.3.2:Security Settings

Come to modify administrator password interface (password is 4 numbers commonly ).

The first line: Old management password (Connecting device password)

The second line : Input new password

The third line: Confirming new password

Then click:Save, it shows under verification

Back to Setting interface after finished.

To choose unlock time

7.3.4:Modify unlock password

1.4.8 means unlock delay time is 1s,4s,8s.

It will reset if do not open door within set time.

This doorbell is equipped with wireless unlock, commonly 1s.

Above time is valid for wired connection only. (this product do not have have such function, wireless door open as default )

Wireless unlock delay time is partially decided by receiver.

Click arrow icon to back

To modify unlock password, usually 4 numbers.

The first line: Input old password

The second line: Input new password

The third line: Confirming new password

Click Save.

It will show if modifying success.

7.3.5:Modify unlock password

7.3.6:Network connections

To choose network type, wired or wireless.

It will display WIFI list, click wifi id ,pop up modify network warning.

(As above picture shows)

Warning: Changing network may cause device to be disconnected.

Click : change

Then choose WIFI you need, input corresponding password.

Click: Ok

After setting, doorbell will be connected to wireless router via WIFI ，it still works even unplug net cable)

Click OK to start formatting, according to the card capacity and speed of different formatting time will be different, usually in about 5-10 seconds will be formatted, formatting will be prompted to complete the format is completed

Click reset to input administrator password and confirm it.

input administrator password and confirm it

Note: after restore, please re-add device. Security password can not be modified,Other settings restore to pre-set state. All settings restore to factory state after hardware reset.

To set email address.

Input email account and password

Click save.

It will show a verification success.

Then there is an alarm and send a picture to yr email.

Note: the password is for email authorization ,not email login password. But when yahoo email,login in password is ok. Also you need to open email IMAP/SMTP function.

7.3.13:Mailbox for sending alarms

Insert TF Card, Press video key when call to record video. You will find video information here.

Click one a video to playback.

You can search for videos by last 1 day, last 3 days, last 1 month and customize it

7.3.14：Remote playback

To playback video

Click on equipment information, can display the current version, and the APP version information

To enter user management interface

Click: add me to add yourself (if you are already on list, it will show you are added)

Click “—”to delete user.

If a user is not showed on list, who will not get any message and can not open door when video intercom. Others functions can work.

Click: ← to exit setting.

1 Press remote control unlock receiver code switch for 3 seconds Or music box volume key for 3s.

2 Green led quick flash means start code

(It stops code if not receive code information within10-15s,please repeat above steps to code again )

3 Press cellphone APP wireless code,which changes to gray color.

4 Receiver or music box LED green light keeps on means code successfully.

5 Now you can wireless unlock on video intercom interface.

6 Set wireless lock time 1s.

7 When music box code successfully, it will ring 15s when visitor press doorbell call button.

7.3.19:Wireless code

Press bell icon (as above picture shows) to looking alarm message

Click picture :view picture.

Long press picture :delete single picture.

Click trash symbol: delete all pictures

7.4: Looking for record information

7.5: View video and photo

Click Book Arrow icon to view video

7.6: System settings

Click picture: view picture

Long Click picture : delete single picture

Click trash symbol: delete all picture

Click here to enter system setting inteface

You can view account information, switch on /off message sending etc.

(Note: these picture comes from screenshots when video intercom, which is saved in cell phone memory)

7.6.1: Account information

It display account information & mailbox. You can bind cell phone , which can help you find password when forger it and modify log in in password.

Click it to pop up account information interface

Call ring : Cell phone default first 3 ringings .

Alarm ring : Cellphone system defaultly set.

Ringing varies from cellphone version & model.

To choose ringing , only Android system can choose.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download