Using the Taotronics TT-BS012 Barcode Scanner ... - Readerware

Using the Taotronics TT-BS012

Barcode Scanner with Readerware?

The TaoTronics TT-BS012 Handheld Barcode Scanner is a reliable and easy to use wireless 2.4G

scanner. No cables are needed just plug the USB receiver into any available USB port on your

computer, keyboard, monitor or router.

It operates in both real time and batch modes. Use it to catalog books on their shelves, to checkout

books at your computer etc.

No drivers are needed, just plug it in and scan. Works with Windows, Linux and Mac OS X.

You configure the scanner by scanning special barcodes which are included in the manual. For your

convenience we are including the configuration barcodes needed to use the scanner with Readerware.

Refer to your manual for installation instructions.

One time setup

There is a one time setup you need to do to configure your scanner for use with Readerware. If the

scanner ever has problems, repeat the setup to reset your scanner.

Reset to factory defaults

Enable UPC-A 5 digit supplements

Page 1 of 3

Using the Taotronics TT-BS012

Barcode Scanner with Readerware?

Normal mode

Use normal mode when scanning directly into Readerware one barcode at a time. Normal mode is used

when scanning at your computer and when you are in wireless range.

Normal scanning mode

Inventory mode

Inventory mode is typically used when you are away from your computer and out of wireless range. As

you scan a barcode it is stored in memory. When you return to your computer you can upload the scans

into Readerware auto-catalog.

Inventory Mode

Uploading into Readerware auto-catalog

Before uploading your scans you must ensue that Readerware is ready to accept them. When you are

ready to upload your scans, start Readerware auto-catalog. On the ISBN/UPC input page, click on the

Upload button. Select Other wedge reader from the scanner list and ensure the input area has the

keyboard focus. Scan this barcode to send the scans to Readerware.

Transfer data

Page 2 of 3

Using the Taotronics TT-BS012

Barcode Scanner with Readerware?

Clearing data in the scanner

Uploading the barcode scans into Readerware does not automatically remove them. Once you are sure

you no longer need then, you can erase the scans from the scanner.

Clear data

Page 3 of 3

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download