Lecture 1 Introduction to ANSYS Workbench
嚜燉ecture 1
Introduction to ANSYS Workbench
16.0 Release
Introduction to ANSYS Mechanical
1
? 2015 ANSYS, Inc.
February 27, 2015
Welcome!
Welcome to the ANSYS Mechanical application introductory training course.
This training course covers the basics of using ANSYS Mechanical
in performing structural and thermal analyses.
It is intended for all new or occasional ANSYS Mechanical users, regardless
of the CAD software used.
Course Objectives:
每 General understanding of the user interface, as related to geometry import, meshing,
application of loads and supports, and postprocessing
每 Procedure for performing FEA simulations, including linear static, modal, and harmonic
structural analyses and nonlinear steady-state thermal analyses
每 Utilizing parameters for &what-if* scenarios
? Training Courses are also available covering the use of other Workbench modules
(e.g. DesignModeler, Design Exploration, etc.) .
2
? 2015 ANSYS, Inc.
February 27, 2015
Agenda (Day 1)
Morning
Lecture 每 Introduction
Lecture 每 Chapter 2: Mechanical Basics
Workshop 2.1
Lecture 每 Chapter 3: General Preprocessing
Workshop 3.1
Lecture 每 Chapter 3, continued
Afternoon
Workshop 3.2
Lecture 每 Chapter 3, continued
Workshop 3.3 or Workshop 3.4
Lecture 每 Chapter 4: Meshing in Mechanical
Workshop 4.1
Lecture 每 Chapter 4 (continued)
Workshop 4.2
Lecture 每 Chapter 5: Modeling Connections
Workshop 5.1
3
? 2015 ANSYS, Inc.
February 27, 2015
Agenda (Day 2)
Morning
Lecture 每 Chapter 5 (continued)
Workshop 5.2
Lecture 每 Chapter 6: Remote Boundary Conditions
Workshop 6.1
Lecture 每 Chapter 6 (continued)
Workshop 6.2
Lecture 每 Chapter 7: Static Structural Analysis
Workshop 7.1
Afternoon
Lecture 每 Chapter 7 (continued)
Workshop 7.2
Lecture 每 Chapter 8: Modal Analysis
Workshop 8.1
Lecture 每 Chapter 9: Thermal Analysis
Workshop 9.1
4
? 2015 ANSYS, Inc.
February 27, 2015
Agenda (Day 3)
Morning
Lecture 每 Chapter 10: Multistep Analysis
Workshop 10.1
Lecture 每 Chapter 11: Results and Postprocessing
Workshop 11.1
Afternoon
Lecture 每 Chapter 12: CAD and Parameters
Workshop 12.1
Choice of Appendix Chapters or discussion of user issues*
* This course has been designed to run to just over 2.5 days to allow the last afternoon to be more informal. There is
a choice of Appendix Chapters that explore different analysis types or go into some subjects in more depth. If time
allows user problems can also be discussed depending on the number of attendees.
5
? 2015 ANSYS, Inc.
February 27, 2015
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- flacs cfd technical requirements gexcon
- the comsol multiphysics user s guide
- using the workbench ls dyna extension
- modern cad cae cam tools and their applications
- rotor cfd analysis at terrestrial and martian atmospheric
- lecture 1 introduction to ansys workbench
- capillary race in circular tubes using openfoam
- autodesk simulation cfd system requirements
- introductory tutorial on ansys
- flacs cfd technical requirements
Related searches
- introduction to financial management pdf
- introduction to finance
- introduction to philosophy lecture notes
- introduction to management lecture notes
- chap 1 introduction to management
- introduction to computers lecture notes
- how to cite introduction to sociology 2e
- introduction to psychology chapter 1 quiz
- introduction to microeconomics lecture notes
- introduction to sociology exam 1 quizlet
- introduction to psychology lecture notes
- introduction to ict lecture notes