Free Project Guide - Delphi Glass

KraftyBlok? Christmas Projects

Project 1: Let¡¯s Be Merry Block

Materials

?

?

?

?

?

?

?

One KraftyBlok? Rectangle

One 5-inch Strand of LED Lights

5-inch Strand of Small Festive Garland

4-6 Small Ornaments

One Festive Vinyl ¡°Let¡¯s Be Merry¡±

Sticker or a sticker of your choice.

Decorative Ribbon

Scissors

Optional: Extension Cord

Be Safe!

- Use a strand of LED lights instead of regular Christmas Lights. They are much safer and produce less

heat.

Let¡¯s get started

1. Wrap garland around the strand of LED lights.

2. Insert lights and small ornaments inside block

3. Cut a slit in the stopper from edge to center hole.

4. Slide the light cord through the slit, then close block with stopper.

5. Place your choice of decorative sticker on the center front of block.

6. Wrap a decorative ribbon around block and finish with a bow on top.

7. Plug it in and enjoy!

Project 2: Joy Blocks

Materials

?

?

?

?

?

?

?

?

Three Square KraftyBlok? Minis

Three 5-inch Strand of LED Lights

20x20-inch of Festive Snow Blanket

(You will cut 3 pieces into 6X6)

Large Glittery Letter Stickers

Christmas Character Stickers

Decorative Ribbon

Scissors

Pencil

Optional: Extension Cord

Be Safe!

- Use a strand of LED lights instead of regular Christmas Lights. They are much safer and produce less

heat.

Let¡¯s get started

1. Lay the block face down and insert a sheet of 6x6-inch snow blanket in side. Make sure it is lying flat.

2. Carefully insert a 5ft strand of LED lights. If the blanket shifts, just used a pencil to readjust.

3. Cut a slit in the stopper from edge to center hole.

4. Slide the light cord through the slit, then close block with stopper.

5. Place coordinating letter on the block and your choice of character sticker.

6. Wrap a decorative ribbon around block and finish with a bow on top.

7. Repeat this process for the next two blocks. All three blocks together should read ¡°JOY¡±.

8. Connect all the blocks together to light up.

10. Display on a fireplace mantel or under the Christmas Tree and enjoy!

Project 3: The Family Picture Block

Materials

?

?

?

?

?

?

?

?

?

?

?

?

?

?

One Large KraftyBlok? Original

One Large KraftyBlok? Stand

Multi Colored LED Slim Wire Garland

Lights with on and off switch

5x6 Family Photo

Festive Snow Blanket

Large Decorative Ribbon

Small Red Ribbon

Acrylic Paint and Small Paint Brush

Small Decorative Ornaments

One Rectangle Floral Foam

Three Small Sizes of Round Floral Foam

2mm Bendable Wire

Wire Cutters

Scissors

?

?

?

?

Tape

Small Tongs

Hot Glue Gun with Glue Sticks

Pencil

Be Safe!

- Use a strand of LED lights instead of regular Christmas Lights. They are much safer and produce less

heat.

Let¡¯s get started

1. Measure the base of your block and cut your rectangle foam to those exact measurements. You might

have to cut in half to fit in opening.

2. Wrap up your rectangle foam piece in snow blanket and lay at the bottom of the block. Tuck in the

sides with a pencil.

3. For the snowmen double check the Floral Foam Rounds can fit through the opening. If not, simply cut in

half.

4. Decorate your snowmen by painting a face and buttons on the body. Set aside and let it dry.

Optional: You can also make a cute scarf or hat for your snowmen using small red ribbon and hot glue it in

place.

5. Next cut two pieces of wire. One 3-inches and the other 4-inches. The 3-inch wire will be for the small

snowman and the 4-ich wire will be for the larger snowman.

6. Insert both wires onto both ends of the rectangle foam base at the bottom of the block. Use small pliers

for a better reach.

7. Then assemble your snowmen onto their designated wire. First the body then the head. You can also

use your small tongs for this part for easy reach.

8. Next insert your family picture. Make sure the back of the picture is laying flat against the block. You

can tape down for security if you like.

9. Place your Multi Colored LED Slim Wire Garland Lights inside your block. Make sure to keep the on and

off switch outside of block.

10. Adorn the inside of block with small festive ornaments

11. Wrap a decorative ribbon around your block and finish with a bow on top

12. Place block inside our Large KraftyBlok? Stand

13. Place your family picture block anywhere you please to show off your amazing creativity!

All Done!

These are a great way to decorate your home for the holidays and they also make great gifts!

DIAMOND TECH|Tampa, FL 33647|ww.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download