Appendix F: GD&T Revised 10/19/2012 F: 10/19/2012
Supplier Quality Requirements Supplement (SQR)
Page 1 of 3
This manual is intended for use by Kohler Engines Division suppliers as a supplement to the Kohler Co. Global Supplier Quality Manual. To verify the latest version of this
document, go to . To access the Kohler Co. Global Supplier Quality Manual, go to ; Suppliers; Conducting
Business.
Appendix F: GD&T F:
Revised 10/19/2012 10/19/2012
GD&T Resources
Pocket guides, textbooks, ASME Standard Y14.5-2009, and training are available at the following websites.
American Society of Mechanical Engineers (ASME): American Society for Quality (ASQ): GD&T Source:
GD&T ASME Y14.5-2009 ASME: (ASQ): GD&T
GD&T Example
UNCONTROLLED IF PRINTED
Kohler Engines SQR Supplement, Rev. M, Appendix F, Nov. 1, 2012 - 1 -
The Dimensional Results Form is shown on the next page. The Excel version is available in Appendix C ? PPAP Forms.
C-
Date
Revision
Source/Supplier
/
Reason
Item#
Tool Number and/or Cavity Numbers
Production Part Approval Process - Dimensional Results
-
Inspector/Technician
Number of Pages
/
/
of
Part#
Description
Print Specifications
Actual
Comments
Out of Tol
Pass Fail
2
Form PPAP 102 PPAP102
Signature
Title
Date
Rev. Level M
Date 10/19/2012
Revision History
Change Description
New. Replaces old Appendix F ? Supplier Receipt and Acknowledgement form (ref. SQR, Rev. M, Section 1.0 for information on electronic certificate of compliance. . F-.(
M,1.0 )
Changed By
Supplier Quality
3
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- calculation of tolerance stacks using direct position approach in
- first step by step guide for new qa cad user
- quality includes tolerance analysis along with 3d cad pmi and gd t
- gd t reference guide
- verisurf font with gd t symbols 3d metrology software training and cmms
- gd t symbols and terms gd t training and reference materials
- appendix f gd t revised 10 19 2012 f 10 19 2012
- calculating locational tolerances
- gd t example drawings review
- gd t symbols reference sigmetrix