ALTERNATIVE FINISHES PARKERIZING, COLOR CASE …

MEMTEATLAFLINIWSOHRIKNG

PLATING & CASE HARDENING

COLOR CASE HARDENING KIT

Produce Beautiful Color Case Hardening Like The Pros

The subtle shades of blue, gray, and straw on color case parts give a gun a true custom look. Cowboy Action Shooting has brought many guns out of retirement that need to have faded colors restored. We've assembled two, easy-to-use systems with all the items you need to immediately begin a case color hardening operation (except a quenching tub). Complete system includes our 1.37 cu. ft. heat treat furnace, 11" x 4" cylindrical crucible big enough for a rifle action, 30" long crucible tongs for handling ease and safety, Kevlar gloves for protection against high temps (also sold separately), a full face shield to protect your face, 10 pounds of high carbon content wood charcoal, 25 pounds of high carbon content filler-free bone charcoal, five disposable filter masks to keep dust out of your lungs, a long shop apron, and complete instructions explaining the color case hardening process. Kit Without Furnace has the same, large capacity crucible, charcoal, and supplies, only without the furnace, for those who already have a heat source capable of heating the crucible to 1,450? F. ab #100-011-091AV Case Hardening Kit w/Furnace, 3Z2127N56 $2380.99 #080-951-501AV Case Hardening Kit w/o Furnace, 8K430B13 543.99 #494-666-160AV Hi-Temp Gloves, 4D73I65 79.99

*Note: Shipped Truck only. Please call for freight charges.

COLOR CASE HARDENING CRUCIBLE & TONGS - If you already have a furnace, these two tools will make the job easier. Crucible - 138 cu. in. of space lets you color case harden a rifle action or large revolver frame with space for the necessary blocking. Round shape is easy to handle with no wasted corner space. Clamping rings position the canister securely in the tongs when carrying and dumping. Tongs - 30" long handles keep you back, away from the furnace heat, makes grabbing the hot crucible safer and more secure. SPECS: Steel. Crucible - 11" (28cm) high, 4" (10cm) diameter. Tongs - 30" (76cm) long. #080-951-000AV Crucible, 8K80B18 $113.99 #080-951-100AV Tongs, 8K67Q49 99.99 #080-951-200AV Crucible & Tongs, 8K135I35 159.99

SMALL COLOR CASE HARDENING CRUCIBLE - Ideal choice for small parts. Fits small furnaces and only requires 27 cubic inches of bone per session to save you money on small jobs. Perfect for rings, slide stops, bolts, and much more. SPECS: Steel. 51/2" (14cm) high, 33/4" (9.5cm) diameter #080-951-001AV Small Crucible, 8K61Q80 $99.99

HEAT-TREATING CHARCOAL

Produces Dramatic Color & Swirl Patterns

Wood and bone charcoal with just the right sieve size for crucible packing of steel parts to be hardened. Hi-carbon content without waxes or fillers gives brilliant color patterns. Mixing types by specific ratio provides additional control over color and pattern. ab SPECS: Packed in 5 gal. bucket. Bone - 10x28 sieve size, 25 lb. (11 kg) weight. Wood - #6 size. 10 lb. (4.5 kg) weight. #084-097-031AV Bone Charcoal, 5L110P85 $119.99 #084-098-013AV Wood Charcoal, 5L36M83 43.99

ALTERNATIVE FINISHES

PARKERIZING, COLOR CASE HARDENING, PLATING & BROWNING

PARKERIZING-Parkerizing is ideal on most steels (but not aluminum or stainless) as an alternative to bluing. It is ideal for hunting and law enforcement firearms due to good weather resistance, low light reflection and durability against wear. Due to slight surface etching, Parkerizing is not recommended for match-grade barrels. A Pre-Dip Blackener can be used to change the finish to black, or the parts can be blued, dyed or sprayed with Brownells Baking Lacquer or Aluma-HydeTM after Parkerizing. Application is by immersion in a glass, ceramic, fiberglass or stainless steel tank of heated solution.

COLOR CASE HARDENING-This classic finish is found on the receivers of Colt Single Actions and many shotguns. The brilliant, swirling blues, grays and golds are the result of packing steel parts in a mixture of wood and bone charcoal, heating them to roughly 1400? F. then quenching in water. The surface of the steel is also hardened in the process. Because of the high temperatures, warping can be a problem and parts where a specific hardness is critical should not be color case hardened. Application requires a heat treating furnace, a steel crucible to hold the parts, plus high temperature handling gear and a 55 gallon drum of quenching water.

ELECTROLESS NICKEL PLATING-This is an attractive, very durable, extremely hard, metal surface plating often used to blend carbon steel parts with stainless steel, or to provide more weather and wear resistance to parts. It can be applied to matte surfaces for a dull finish or to polished metal for a bright surface. A nickel-plated surface is extremely hard, relatively frictionless, and is so tough that removal requires chemical stripping or sanding. Application requires tanks, heating units and tank agitators.

BROWNING-Traditionally reserved for muzzleloaders, slow, rust browning can be quite attractive. True, rust brown finishes are usually more durable than the quick, heat process browns, although they take much more time to do. Varying techniques can give anything from a smooth, slightly glossy finish to a "rough", non-reflective one. Since it is a rust process, bores and critically fitted parts must be protected. Application varies but may include damp cabinets, hot air guns or propane torches.

METAL-COAT EPOXYTM

Clear, Tough, Protective Finish For Metal Surfaces

Clear, durable, soft-luster finish protects steel, aluminum or brass surfaces from rust, corrosion, dulling, and wear. Excellent coverage, each additional coat bonds with the one before to improve protection. Impervious to most bore cleaning solvents. ab SPECS: Aerosol. 12 oz. (340 g). Clear, semi-gloss or matte finish. #083-075-012AV Metal-Coat Epoxy, Semi-gloss,

3H9Q32 $11.99 #083-075-112AV Metal-Coat Epoxy, Matte, 3H12J55 15.99

EXTRA NOZZLES - Solve many spraying problems by replacing clogged nozzles. Use Clean Out Nozzle to clear a clogged pickup tube, before installing a Replacement Nozzle. ab SPECS: Pak of 12. Correct nozzles for Metal-Coat Epoxy. Clean Out Nozzle not intended for spraying. #084-179-002AV Replacement Nozzle B, 1F2B82 $3.99 #084-179-004AV Clean Out Nozzle, 1F2M82 3.99

ALUMA-HYDE? II

Durable Epoxy Base Paint Withstands Bore Cleaners & Solvents

The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethelyene. Today's new family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it's great on synthetic stocks. Aluma Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gun shop. Matte finishes are available in Parkerizing Gray (medium gray), Dark Gray Parkerizing (medium dark), Stainless Steel Gray (light), Earth Brown, Matte Clear, O.D. Green for creating camo pattern stocks, Desert Tan (light, desert-tan sand), Coyote (light, gray-brown) and the original favorite, Matte Black. Gloss Clear help expand the overall applications of this time- and money-saving product. We like the Matte Black color for refinishing those used AR-15 buttstocks and handguards you pick up when building a parts gun, knock around truck guns and of course, anodized parts. Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Here's the way we apply it: Warm the part and the Aluma-Hyde II to about 90? F.; spend a couple of minutes shaking the daylights out of the Aluma-Hyde II and apply a medium coat for good coverage. You can recoat in a few minutes but don't wait more than thirty minutes. Once Aluma- Hyde II starts curing, you must wait until it's fully cured to recoat. You can cut the cure time to approximately two days by circulating warm air (90? F. works fine) past the part. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications. ab SPECS: 12 oz. (340 g) aerosol can.

STOCK # #083-002-012AV #083-002-212AV #083-002-412AV #083-002-512AV #083-002-210AV #083-002-014AV

COLOR Matte Black Park. Gray SS Gray Earth Brown Coyote Magpul Flat Dark Earth

STOCK # #083-002-112AV

#083-002-812AV #083-002-312AV #083-002-712AV #083-002-211AV

COLOR Semi-Gloss Black Dark Parkerizing O.D. Green Matte Clear Desert Tan

-- Advise # -- Aluma-Hyde II, 1F10B14 $ 13.99

REPLACEMENT NOZZLES - Nozzles can get clogged if you forget to clear them after each spraying session or, if you don't shake well, the pickup tube inside the can gets plugged. We have three nozzles that solve these problems. Replace clogged nozzles with either of these two options: Replacement Nozzle B, Round Pattern provides a broad, round pattern; Fan Pattern Replacement Nozzle provides a narrow, verticle pattern, similar to professional spray guns. Clean Out Nozzle - Lets full pressure blow through a plugged pickup tube to clean it out. Once clear, install a Replacement Nozzle to continue spraying. ab SPECS: Pak of 12. Clean Out Nozzle not intended for spraying. These are the correct nozzles for Aluma-Hyde II. #084-179-002AV Replacement Nozzle B, 1F2B82 $3.99

#084-179-005AV Fan-Style Replcmnt Nozzles, 6A3L80 4.99

#084-179-004AV Clean Out Nozzle, 1F2M82 3.99

LIQUID ALUMA-HYDE? II - Formulated specifically for airbrush and spray gun application, combines the same abrasionand solvent resistant properties of aerosol Aluma Hyde II with the freedom to use the application system of your choice. Available in Parkerizing Gray (medium gray), Dark

SPRAY GRITTM

Grit-Filled Epoxy Paint Sprays Extra Grip Or A Slip-Resistant Surface Wherever You Need It

Now you can instantly add extra grip to any rifle or pistol stock without machining or baking. Epoxybase makes it long wearing and water- proof. Sticks to all properly prepared fiberglass, wood, aluminum, and metal surfaces and dries in only minutes. Roundshaped, synthetic grit particles have absolutely no sharp edges so they can't cut or abrade your face or hands. Especially fantastic for fiberglass stocks. ab SPECS: 12 oz. (340 g) aerosol can. 1 can covers 24 sq. ft.

STOCK # #083-044-004AV #083-044-002AV #083-044-001AV

COLOR Green Gray Clear

STOCK # #083-044-003AV #083-044-005AV

COLOR Brown Black

-- Advise # -- Spray Grit, 3H9C50 $ 11.99

REPLACEMENT NOZZLES - Nozzles can get clogged if you forget to clear them after each spraying session or, if you don't "shake well", the pickup tube inside the can gets plugged up. We have two nozzles that solve these problems. Replacement Nozzles Replace clogged Nozzles. Clean Out Nozzle - Lets full pressure blow through a plugged pickup tube to clean it out. Once clear, install a Replacement Nozzle to continue spraying. ab SPECS: Pak of 12. Clean Out Nozzle not intended for spraying.These are the correct nozzles for Spray Grit.

#084-179-003AV Replacement Nozzle C, 1F2L87 $3.99

#084-179-004AV Clean Out Nozzle, 1F2M82 3.99

CAMO PAINTS

Make Your Own Camouflage Patterns

High pigment density, ideal for one-coat coverage of synthetic stocks and metal rifle components, plus all of your other tactical gear. Fast-drying enamel applies easily. ab SPECS: 12 oz. (340 g) aerosol cans.

STOCK #

COLOR

STOCK #

COLOR

#040-009-790AV Forest Green #040-009-880AV Black

#040-009-520AV Dk. Green #040-009-920AV Marine

#040-009-570AV Earth Yellow

Corp. Green

#040-009-670AV #040-009-680AV #040-009-770AV

Earth Red Field Drab Sand

#040-009-970AV #040-009-990AV

O.D. SemiGloss Earth Brown

#040-009-870AV Olive Drab

-- Advise # -- Camo Paints, 4K4H67 $ 5.99

Parkerizing Gray (dark gray), and O.D. Green. Thin with Liquid Aluma-Hyde II Solvent & Thinner to the required consistency for your spray device. Use thinner to clean spray equipment and work surfaces; does not affect hardened strength and will not soften fully cured Aluma Hyde II. SPECS: Paint - 8 oz. (237ml) can. Thinner - 1 qt. (32 oz./946ml) can.

STOCK # #083-002-817AV

COLOR Parkerizing Gray

#083-002-816AV

Dark Parkerizing Gray

#083-002-815AV

O.D. Green

-- Advise # -- Liquid Aluma-Hyde II, 3H8G15 $ 9.99

#083-002-001AV Liquid Aluma-Hyde II Solvent & Thinner, 5L17B92$22.99

10/2S2PPREARYF-OORNMFIANNISCEHEPSARTS

PAGE400

GUARANTEED. FOREVER.?

SINCE 1939

Office/Tech: 641-623-5401

SPRAY-ON FINISHES

GUN-KOTETM

OVEN CURE GUN FINISH

Genuine GUN-KOTE Spray-On/Bake-On Finish In Convenient Aerosol or Airbrush Liquid

The world-famous, ultra-thin, friction-reducing coating that lasts and lasts can now be applied to any clean, pre-heated metal part in as little as 2 hours without the extra expense of owning an air brush. Brownells has teamed up with KG Products to produce the genuine GUN-KOTE epoxy finish in a convenient aerosol that's every bit as easy and foolproof to apply as our other, great, bake-on, gun finishes. You get the quality of genuine GUN-KOTE backed by the Brownells no-hassle, complete satisfaction guarantee; an unbeatable combination!

Now you can easily apply the self-lubricating benefits of molybdenum disulfide to alloy steel, stainless steel, brass and aluminum, even properly prepared nickel plating, in just minutes. Prepare, clean and pre-heat your part to 100?, spray on Brownells GUN-KOTE and allow the part to dry. Bake the part in an oven at 300? for one hour and you're done. You've protected the metal parts of your valuable firearm from rust, corrosion, and scratches with a beautiful finish that will wear for years and help keep your gun looking just like new.

Brownells GUN-KOTE is a durable, second-generation epoxy, thermo-set resin finish that will not break down, peel or dissolve. In fact, once it's applied, the only way to remove Brownells GUNKOTE is to abrasive blast the part. It is resistant to all known gun solvents and thinners. Each coat is approximately .0004" thick so Brownells GUN-KOTE can be used on both internal and external parts where a close-tolerance fit is required without having to worry about interference. This makes Brownells GUN-KOTE the perfect, maintenance-free coating for handgun slides and frames, shotgun receivers and magazine tubes, rifle actions and bolts, anywhere you need an ultra-thin, self-lubricating, permanent coating that protects and wears like crazy. ab SPECS: Aerosol - 6 oz. (170 g) weight. Liquid - 8 fl. oz. (237 mL).

STK# AEROSOL 6oz. #083-051-001AV #083-051-002AV #083-051-003AV #083-051-008AV #083-051-009AV #083-051-013AV NA NA

STK# LIQUID 8oz. #083-166-006AV #083-166-001AV

NA NA NA #083-166-013AV #083-166-008AV #083-166-005AV

COLOR Matte Black Gloss Black Matte Brushed Stainless Matte O. D. Green Matte Gray Gloss Gunmetal Blue Matte O. D. Green Matte Dark Earth

-- Advise # -- Gun-Kote, Aerosol, 6 oz., 3H19J47 $ 23.37 -- Advise # -- Gun-Kote, Liquid, 8 oz., 3H17Q88 24.99

K-PHOS PRE-TREATMENT - Advanced phosphate liquid replaces the hot tank phosphating process to provide protection against rust and corrosion, plus a superior crystalline bonding surface for Brownells GUN-KOTE finishes. K-PHOS chemically etches and instantly seals the metal surface to prevent rust prior to painting. Application requires surfaces to be completely degreased using Brownells TCE or KG3 Solvent Degreaser. Machined surfaces can be abrasive blasted for maximum adhesion. Easy application: brush on, dip the parts, or spray on with air brush. Does not require thinning, and dries in 10 to 15 minutes for fast turn-around. Highly recommended for use with GUN-KOTE on alloy steel, stainless steel, aluminum, and sound quality nickel and chrome plating. Meets MILC-490A and TT-C-490 specifications. SPECS: Liquid, clear. 8 fl. oz. (237 mL) or 16 fl. oz. (473 mL) plastic bottle.

#665-000-013AV K-Phos, 8 oz., 5F15P73 $18.99

#665-000-014AV K-Phos, 16 oz., 5F47F15 57.99

DURACOAT SHAKE-N-SPRAYTM

FINISHING KIT

Easy Prep & Spray System For A Durable Matte Black Finish

Easy-to-use kit contains all the components you will need to achieve a durable solvent-, scratch-, and chipresistant finish on any firearm. Can be applied over bluing, phosphate finishes, and anodizing; also works on plastic and wood. Completely seals the surface to prevent rust and corrosion. Strip the part with the included Cleaner/ Degreaser, scuff with enclosed pad, mix the DuraCoat liquid with the hardner, fill the Pre-Val spray unit, and spray the part. Finish dries overnight and attains a complete cure in 3-4 weeks. Contains enough DuraCoat liquid to fully coat a rifle or shotgun. ab #100-006-802AV DuraCoat Shake-N-Spray Kit,

9K37A29 $39.95

BAKE-ON FINISH CURING OVEN

Provides A Tough-As-Nails, Oven-Baked Finish

Our high-efficiency oven is custom engineered to ensure uniform and complete part curing while delivering a "tough-as-nails" bakedon finish when using Brownells Gun-Kote or Teflon?/Moly oven cure finishes. Advanced technology combines two separate heating elements with a high-tech interior surface to optimize airflow and ensure consistent temperatures that help prevent hot spots, surface blemishes, and discolorations. Thermostat adjustable from 100? F to 400? F for precise temperature control during large or small production runs. Adjustable, 60 minute countdown timer turns oven on when set; audible bell alerts you when time is up, and oven turns off. Separate "constant on" position works like a manual override to bypass the timer and allow oven run-times longer than 60 minutes. Front mounted temperature gauge provides accurate, real-time temperature monitoring. Oven panels are insulated with over 5 lbs. of high density, energy-saving fiberglass to prevent heat loss and reduce operating costs. Four, removable drying racks allow you to optimize interior space and maintain full capacity. Two ceiling mounts, with five holes each, allow you to hang parts up to 42" long. Extra long power cord for easy setup in a variety of locations, plus a panel-mounted electrical fuse for fail-safe, overload protection. High-temp, matte black surface finish is corrosion resistant. Holds up to five barreled rifle actions, plus numerous handguns and small parts. Ships directly from manufacturer. Please allow 30 additional business days for shipping. ab SPECS: Steel, black matte, high-temp finish. 15" (38cm) long, 17" (43cm) wide, 481/2" (123cm) high. Internal Dimensions - 10" (25cm) long, 13" (33cm) wide, 44" (112cm) high. Temperature Range - 100? F (38?C) to 400? F (204?C). Current Draw - 7.4 amps 120 VAC. UL approved heating elements.

#080-000-667AV Bake-On Finish Curing Oven, 7B2096F79$2099.99

LAUER CUSTOM WEAPONRY

DURACOAT PAINTING SYSTEM

Durable Finish Protects Any

Gun Part

Provides a protective paint that won't chip, crack, or flake; works great on any material. Hardener and paint form a chemical bond for durability and elasticity. Airbrush application gives a smooth finish. Dries in 10 minutes and fully cures overnight; speed cure in the oven at 110? F for 1 hour. ab SPECS: Kit includes: 8 fl. oz. (237 ml) DuraCoat, black, matte; 1 fl. oz. (30 ml) Hardener; 15 fl. oz. (444 ml) Airbrush Propellant; 2 fl. oz. (59 ml) Reducer; 1 fl. oz. TruLube; (1) set of Measuring Spoons; (1) Ez Airbrush Kit; (1) pair Latex Gloves; (1) Particle Mask; Instructions. Finishes 2-4 firearms; additional propellant may be required.

#100-000-989AV #100-000-996AV #100-001-001AV #697-000-001AV

#100-001-002AV #100-007-956AV

#100-007-949AV

#100-007-952AV

#100-001-004AV

#100-007-955AV

#100-011-775AV #100-007-939AV

#100-007-936AV

#100-007-923AV

#100-007-932AV

Level II Starter Kit, 9K65N64 $79.99

4 oz. Reducer, 9K9Q25 9.49

2 oz. Hardener, 9K10N67 11.50

15. oz. Airbrush Propellant, 7F10F06 11.99

4 oz. DuraCoat, Mat Blk, 9K23I29 24.95

4 oz. DuraCoat, Tactical Black, 9K23K29 24.95

4 oz. DuraCoat, Semi-Gloss Black, 9K23P29 24.95

4 oz. DuraCoat, Magpul Flat Dark Earth, 9K23A29 24.95

4 oz. DuraCoat, O.D. Green, 9K23B29 24.95

4 oz. DuraCoat, Tactical O.D. Green, 9K23I29 24.95

4 oz. DuraCoat, White, 9K23K29 24.95

8 oz. DuraCoat, Matte Black, 9K36G36 38.95

8 oz. DuraCoat, Tactical Black, 9K36L36 38.95

8 oz. DuraCoat, Semi-Gloss Black, 9K36J36 38.95

8 oz. DuraCoat, Magpul Flat Dark Earth, 9K36L36 38.95

DURAFIL - Two-part surface filler can be applied with an airbrush and covers pits, dings, and scratches. No thinning required. ab SPECS: Kit contains: 4 fl. oz. (118 ml) bottle of DuraFil, 1/2 fl. oz. (14.8 ml) bottle of DuraCoat Hardener, and instructions.

#100-001-005AV DuraFil Kit, 9K19P13 $20.50

CAMOPAKS - Paks of selected colors help you create distinctive camouflage patterns. ab SPECS: Kits include different combinations of 2 fl. oz. (59 ml) jars of paint and 1 fl. oz. (30 ml) Hardener. Urban Tiger Stripe ? Matte Black, Snow Gray, White; Vietnam Tiger Stripe ? Woodland Tan, Matte Black, Tiger Stripe Green, Tiger Stripe Brown; Desert Storm ? Matte Black, Desert Mint, Desert Beige, Desert Brown, White; Woodland Signature Series ? Woodland Tan, Woodland Green, Woodland Camo Brown, Matte Black.

#100-001-006AV

#100-001-008AV #100-001-009AV

Urban Trigger Stripe Camopak, 9K37F29$39.95

Desert Storm Camopak, 9K43I76 46.99

Woodland Sig. Camopak, 9K37H29 39.95

LAUER CUSTOM WEAPONRY

DURACOAT AEROSOL

Finish & Hardener In One Can

Unique can-within-a-can system includes color finish and hardener in one easy-to-use unit. Eliminates need for measuring, mixing or airbrush. Just release the hardener, and spray onto a gun. Adjustable nozzle lets you spray in vertical or horizonal pattern. Works on all types of metal, plastic and wood. Can be applied over bare metal, or any metal finish like Parkerizing, anodizing and bluing. Once activated, can remains useable for up to 48 hours. Each can contains enough for 2 to 4 firearms, depending on size. Requires no baking or preheating. Pink Lady requires base coat of DuraCoat White before final application. ab SPECS: Aerosol, 12 oz. can. #100-013-668AV Matte Black, 9K42G89 $45.95 #100-013-669AV Woodland Green, 9K42E89 45.95 #100-013-670AV Parkerize Color, 9K42F89 45.95 #100-013-671AV OD Green, 9K42J89 45.95 #100-013-673AV Combat Gray, 9K42Q89 45.95 #100-013-675AV MAGPUL Flat Dark Earth, 9K42H89 45.95 #100-013-676AV Blackhawk Coyote Tan, 9K42M89 45.95 #100-013-672AV White, 9K42I89 45.95

LAUER CUSTOM WEAPONRY

SHAKE 'N BAKE FINISHING KIT

Tough, Durable Oven-Cure Finish For All Metals

Spray-on DuraBakeTM enamel finish combines the ease of application of the Duracoit system with the extra durability of a bakedon finish. DuraBake can be applied to ferrous metals, stainless steel, aluminum, alloys, even plastic, and dries to the touch in as little as 15 minutes before oven curing. Part of the secret is the TruStrip aerosol cleaner/degreaser that thoroughly preps the metal's surface, before application of the DuraBake enamel itself. The TruStrip guarantees plenty of "tooth" to hold the enamel tight to the surface; baking speeds the curing of the enamel and seals the deal. Produces a uniform, deep black finish. Many more colors available at brownells. com. ab SPECS: 6 oz. each of DuraBake and TruStrip. Produces a black finish. #100-009-176AV Shake 'N Bake Kit, 9K32L63$34.95

PAASCHE H-SET AIRBRUSH KIT

Easily Apply Baking Lacquer, Stock Finishes & More

Get fast, even spray application with pinpoint accuracy. Perfect for applying Brownells Aluma-Hyde II?, Baking Lacquer, and Teflon?/Moly Oven Cure Gun Finish to metal surfaces. Use with your air compressor or other air source. Requires 1 cfm, clean, dry air at 20-45 psi. 3 fl. oz. (88.7 ml) color bottle for large jobs available separately. ab SPECS: Kit includes H-5 single-action airbrush, 1/4" (6.4mm) x 6 (182.9cm) air hose w/couplings, 2 air caps, 1/4 fl. oz. (7.5 ml) color cup, 1 fl. oz. (30 ml) color bottle, 1 fl. oz. plain bottle, adjustment wrenches, hanger, and instructions. #697-105-000AV H-5 Airbrush Kit, 7F54C86 $64.99 #697-105-004AV 1 oz. Color Bottle Assembly,

7F4C06 5.99 #697-105-103AV 3 oz. Color Bottle Assembly,

7F6P44 7.99

Orders: 800-741-0015

order on the web



PAGE401

SPRAY-ON FINISHES

NIC INDUSTRIES

CERAKOTETM CERAMIC COATINGS

Tough, Durable Coatings For Maximum Protection

State-of-the-art, CerakoteTM Firearm Coatings provide a durable, weather- and corrosion-proof, ceramic-based protective finish that resists scratching, chipping, and abrasive cleaning solvents. Hardener and paint chemically bond into an ultra-thin coating that adheres to almost any surface for a clean, professional finish. Apply with an airbrush or HVLP touch-up gun for a smooth finish. Oven Cure Kit requires oven baking for 2 hours at 250? for optimal cure or 1 hour at 300? for quick cure. For heatsensitive materials such as plastics, a 2 hour cure at 200? is adequate. Oven Cure Refill lets you order more paint and hardener only. Air Dry requires no baking and is tack free in 40 minutes, completely dry in 24 hours, and fully cured in 5 days. ab SPECS: Oven Cure Kit includes 4 fl. oz. (118 ml) Cerakote, .17 fl. oz. (5ml) hardener, 3.4 fl. oz. (100 ml) graduated cylinder, (4) funnel filters, and instructions. Large Graphite Black kit comes with 32 fl. oz. (946ml) CerakoteTM, 4 fl. oz. (118ml) hardener, graduated cylinder, (4) funnel filters, and instructions. Oven Cure Refill - Includes 4 fl. oz. Cerakote, .17 fl. oz. hardener, (4) funnel filters, and instructions. Air Dry Kit - Premixed and includes 4 fl. oz. Cerakote, (4) funnel filters, and instructions. Finishes up to 6 handguns or 2 to 3 long guns.

OVEN CURE CERAKOTE

STK# KIT

STK# REFILL

COLOR

#100-003-743AV #100-003-857AV Graphite Black

#100-003-744AV #100-003-861AV O.D. Green

#100-003-747AV #100-003-859AV Sniper Gray

#100-003-745AV #100-003-860AV Coyote Tan

#100-003-746AV #100-003-858AV Stainless

#100-004-735AV #100-004-737AV Desert Sand

#100-004-736AV #100-004-738AV Dark Earth

#100-011-643AV #100-011-640AV Magpul Flat Dark Earth

#100-011-642AV #100-011-641AV Burnt Bronze

#100-005-611AV

NA

Graphite Black (Large Kit)

-- Advise # -- Cerakote Oven Cure Kit, 4N37P50$ 46.99

-- Advise # -- Cerakote Oven Cure Refill, 4N29L64 34.99

#100-005-611AV Large Oven Cure Kit, Graphite Black, 4N92J86 $101.99

AIR DRY CERAKOTE

STOCK #

COLOR

STOCK #

COLOR

#100-003-852AV Graphite Blk #100-004-740AV Dark Earth

#100-003-856AV #100-003-854AV #100-003-855AV #100-003-853AV #100-004-739AV

O.D. Green Sniper Gray Coyote Tan Stainless Desert Sand

#100-011-644AV #100-017-329AV #100-017-330AV

Magpul Flat Dark Earth High-Gloss Clear Matte Clear

-- Advise # -- Air Dry Cerakote, 4N29N64 $ 39.99

PAASCHE AIRBRUSH CLEANING KIT

Keeps The Paint Flowing Smoothly

Kit contains the required brushes to clean all parts of an airbrush. Large polymer-handled brush helps clean paint cups and jars, and molded grip keeps the brush in your hand. Braided stainless-steel core brushes feature spiral poly bristles ranging from 11mm diameter down to only 2 mm diameter to let you clean hardto-get spaces such as inside tubes and nozzles. Loop ends on steel brushes let you organize them on included split ring. SPECS: Large brush, polymer, 7" (17.7cm) long. Steel brushes: (1) 6"(15.2cm) long. (5) 4" (10cm) long.

#697-000-002AV Airbrush Cleaning Kit, 7F16H60 $19.99

NIC INDUSTRIES

BABY SERIES SPRAY GUN

Handles High-Viscosity Paint Without Spitting

Miniature spray gun attaches to common shop air hoses and provides precise control over spray patterns, even with high-viscosity metallic paints. Gives performance similar to popular RG-3 spray gun. Spray pattern can be adjusted from round to full-fan shape. Gravity-feed cup will work with small amounts of paint without spitting, making it ideal for painting firearms. Cup roates, allowing gun to spray from any angle or position. Includes spray gun, cup and air chuck. ab SPECS: Stainless steel spray gun and cup. Spray pattern adjusts from 1/8" (3mm) to 6" (15.2cm) wide #100-014-852AV Baby Series Spray Gun, 4N347A46 $370.00

TACTICAL TAPE

Secure Temporary Attachment Of Tactical Gear To Weapons

A strong, waterproof, nonreflective tape for secure but temporary attachment of pressure switches or as camo to break up your gun's silhouette. Use to tape down zippers, swivels, straps and other sources of noise that could give away your position during stealthy operations. Has a thousand and one other uses in the field, in the armory, or on your workbench. This is vinylcoated, high thread count cloth tape, not cloth reinforced vinyl "duct" tape. Tears off the roll clean and straight. High-tack, synthetic rubber adhesive won't leave behind sticky residue and provides excellent adhesion and conformability over a wide temperature range. 42 lb. per inch tensile strength means this tape won't come loose during stressful tactical operations. Once you've used this stuff, you won't settle for ordinary electrical or duct tape ever again! ab SPECS: Vinyl coated cotton cloth, synthetic rubber resin adhesive. 1" (2.5cm) wide, 180 (55m) long, .001" (12 mil) thick. Available in Black and Coyote Brown. #100-002-654AV Tactical Tape, Black, 5A00HML$14.99 #100-002-656AV Tactical Tape, Coyote Brown,

5A19N93 23.99

HIGH TEMPERATURE MASKING TAPE

Use With Oven-Cure Finishes-- Withstands 400? F Heat

Strong, yet flexible polyester tape withstands sustained temperatures up to 400? F (204? C), making it the perfect masking medium to use with Brownells Baking Lacquer, Gun-KoteTM, Teflon?/Moly Oven Cure Gun Finish, and similar oven-cured finishing products. Minimal-bulk, .002" thick polyester backing conforms easily to curves and irregular shapes, yet won't shred when tape is removed. Translucent, so you can see the workpiece underneath as you apply the tape to help you position it precisely. Advanced silicone adhesive grabs tightly and won't pucker, and pulls off clean with no residue. ab SPECS: Polyester backing, green, silicon adhesive. Sold in 72 yard (65.8m) rolls, in widths listed below. #080-000-611AV 1/4" High Temp Masking Tape, 8K3G77 $4.99 #080-000-612AV 1/2" High Temp Masking Tape, 8K5H32 6.99 #080-000-613AV 1" High Temp Masking Tape, 8K9M86 11.99 #080-000-614AV 2" High Temp Masking Tape, 8K20L89 22.99

6300 RESPIRATOR

Keep Your Lungs Safe & Clear; Top Protection For Gunsmiths & Hobbyists

Don't take chances with your health -- wear a respirator any time you apply Brownells spray-on finishes, grind, sand, or come in contact with any particulates that don't belong in your lungs. The NIOSH-approved 6300 Respirator provides superior protection from paint and pesticide vapors, solvents, glue, mists, and other airborne particulates. Flexible halfmask face piece is lightweight and comfortable to wear; dual elastic headbands won't pinch or bind. Disposable filter elements are easy to replace, plus the modular construction allows fast disassembly for cleaning. ab SPECS: Respirator Kit includes face piece, (2) organic vapor cartridges, (2) filters and (2) filter covers. 10.2 oz. (289g) wt. #100-004-597AV 6300 Respirator Kit, 9Z39F99$42.99 #100-004-594AV Replacement Particulate Filter, each,

6K2I45 2.99 #100-004-596AV Replacement Filter Retainer, each,

4H2E43 2.99

SPRAY-ON, BAKE-ON FINISHES

BROWNELLS GUN KOTETM

This is the long-time, industry standard, now available in an aerosol can. It gives a thin, extremely tough, bake-on finish with the lubricating qualities of molybdenum disulfide. Thickness buildup is minimized without sacrificing abrasion or chemical resistance. Recommended for application on aluminumoxide-blasted surfaces only. Slightly less forgiving than Baking Lacquer or Teflon/Moly where cleaning and spraying techniques are concerned.

ALUMA-HYDE? II

Brownells Aluma-Hyde? II is a high-grade, air-dry, epoxy paint for use on aluminum alloys, steel, fiberglass and plastics. Available in aerosol only, it gives a very tough finish, resistant to scratches and dings and is not affected by the solvents and oils used in the firearms industry. It even stands up to most of the new "miracle" bore cleaners. Available in colors to match blued and stainless steel parts, Parkerizing, stocks, etc.

METAL-COAT EPOXYTM

Brownells Metal-Coat is a clear, tough, air-dry, epoxy paint that's the ideal choice to protect polished or bead-blasted steel, aluminum or brass surfaces. One coat from the aerosol can provides superb rust resistance, additional coats bond into the base coat for more scratch protection. Holds up well to gun oils and solvents although some of today's most aggressive, "super" bore cleaners may damage it. The soft lustre looks great and maintains the beauty of color case hardened steel.

GIVE YOUR GUN THE CAMO

PATTERN YOU NEED WITH

SPRAY ON FINISHES

ALUMA-HYDE II? GUN-KOTETM

OVEN CURE FINISH METAL-COAT EPOXYTM

? Fast & easy to apply ? Many colors to choose from ? Tougher & more durable

than paint ? Economical alternative to

bluing or Parkerizing

WATCH OUR SPRAY-ON PAINT SERIES AT

PAGE402

GUARANTEED. FOREVER.?

SINCE 1939

Office/Tech: 641-623-5401

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download