Cetme - HK G3 Compatibility page! - Combat Rifle
[Pages:3]Cetme Parts!
Page 1 of 3
Cetme - HK G3 Compatibility page!
(are HK parts a match for your Cetme?)
YES, the below HK parts will work perfect on a Cetme
Barrels Yes Barrel Retainer Pins Yes Firing Pin Yes* Spring, for firing pin Yes* Rollers Yes +2, +4 Rollers Yes Retainer Plate and Roll Pin Retainer for Rollers Yes Extractor Yes* Extractor Spring Yes* Recoil Spring Yes* Backplate or Complete recoil Assembly Yes with minor fitting to the plastic sleeve at the end of the spring guide rod Complete Stock set Yes with minor fitting to the plastic sleeve at the end of the spring guide rod Collapsible Stock Yes with minor fitting to the plastic sleeve at the end of the spring guide rod Buttstock Yes with minor fitting (needs the buffer hole matched to use the cetme buffer) Grip Frames Yes Complete Trigger Pack Yes (but no individual parts) Rear Sight Yes (but only if entire sight base is swapped) Handguards, Slim Yes Handguards Wide Yes with minor fitting. Just like the old style HK triple frame, the cetme has a bipod retaining ring that prevents the wide from installing Pistol Grip Yes Triple Frames Yes Flash Hider Yes Eyeloop for triple frame Yes Cocking Handle Yes* Spring for cocking handle Yes* Pivot Pin for cocking handle Yes Mag Catch parts Yes Paddle mag release Yes End Cap, Dust Cover Yes (but cetme will not fit g3) Bayonet Adapter Yes* Bayonet Yes* (only when using adapter) Retainer Pins Yes* Blank Firing Adapter Yes Claw, Stanag Scope Mount Yes POF Carry handle and Port Buffer Yes (carry handle slight modification to cetme handguard)
*these items not only interchange but are an improvement over existing Cetme parts. Over the years some items have been strengthened or improved by HK.
No, the below HK parts will not work on a Cetme:
Trunions No Bolt Carriers No Locking Lever for bolt carrier No
12/14/2007
Cetme Parts!
Page 2 of 3
Bolt Head No Locking Piece No Cocking Tube No Support for Cocking Handle No Recoil Buffer No unless using HK buttstock individual fire control group parts like trigger, sear, hammer: No
Cetme Only Parts!
We have a small number of the following Cetme Only parts! These hard to find parts are original Spanish Cetme production.
Cetme Bolt Head New $50
Cetme Full Auto Bolt Carrier stripped New $50
Complete Cetme Full Auto Bolt Assembly New $90 (includes bolt, carrier, locking piece, firing pin/spring, rollers, extractor Etc)
Complete Cetme Full Auto Lower (Safe, Semi Full) $90
Paddle/Flapper Mag Release $12 Cetme Full Auto Hammer $9 Cetme Full Auto Trigger $9 Cetme Full Auto Sear $9 Bayonet Lug with cleaning kit/tube complete $15
Cetme Front Sight Tool, US made $11.75
(works better than the original Spanish tool!)
Cetme Manual $5
Back to: G3 - HK91 Parts
MG Parts * P38 & P1 Parts * Other Gun Parts * Clothing & Gear * Cleaning Kits
12/14/2007
Cetme Parts!
Page 3 of 3
HOME
For Ordering Information Click Here!
RTG Parts 623-362-3459
RobertRTG@
This page was last updated April 30, 2007
12/14/2007
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.