1C75 C75 XC75 080A72 steel
EN10083-2 1C75 steel plate/sheet,EN10083-2 1C75 steel plate/sheet, under EN standard, we can regard 1C75 steel plate/sheet for general Construction steels.EN10025 E295 steel plate/sheet is for general Construction steels.The followings are the chemical composition and the mechanical properties of EN 1C75 steel.
| 1 C75 |Comparision of steel grades |
|EN 10083-2 | |
|Number:1.0605 | |
| |JIS G 4051 |- |
| |DIN 17200 |C 75 |
| |NFA 33-101 |×C 75 |
| |UNI 7846 |C 75 |
| |BS 970 |080A72 |
| |UNE 36011 |- |
| |SAE J 403-AISI |1074 |
1C75 steel plate Chemical Composition
|Grade |C(%)min-max |Si(%)min-max |Mn(%)min-max |P(%)max |S(%)max |Cr(%)min-max |
|1 C75 |0.70-0.80 |0.15-0.35 |0.60-0.90 |0.025 |0.025 |0.20-0.40 |
1C75 steel sheet Mechanical Properties
Grade |Condition |Yield Strength R°(Mpa) |Tensile StrengthRm (Mpa) |Elon- gation A5(%) |Hardness HRC |Quenching Temperature (℃) |Benda- bility |Nominal Thickness,t 1.95mm≤t≤10.0mm | | | | | | | | | |Rolled |Annealed | | 1 C75 |Rolled Annealed Water-quenched Oil quenched |600 370 |1000 570 3000 2760 |15 28 |67 64 |785 825 |Min.reco-mmended Bending radius (≤90°) |3.0 ×t |1.0×t | |
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.