Quantity of one (1) Boss model BULLET portable air ...
MINIMUM SPECIFICATIONS FOR BOSS MODEL FINAL TIER 4 210DUS
1. Scope
This specification covers diesel engine driven, skid mounted air compressors, complete with all accessories, hereinafter specified and required for a complete operating unit.
2. Manufacturer’s Standard Unit
As shown in current published literature.
3. Operation
The compressor shall be capable of satisfactory operation when tilted 15 degrees
in any direction.
4. Engine John Deere
4 cycle, 4 cylinders, diesel engine with reserve horsepower when operating compressor at rated capacity and pressure. Engine to have a minimum of 74 horsepower, John Deere 4045D, Final Tier/Stage IV4, not to exceed 2400-RPM maximum governed speed. Parts available directly from the manufacturer. Liquid cooled and equipped with the following:
Start position on engine control to allow engine and compressor oil to warm up
under Light load
Separate dry type air filter for engine and airend.
Spin on type full flow lubricating oil filter
Primary and Secondary Fuel filters
DEF, equipped with rain cap
5. Electrical System
Heavy-duty 12-volt negative ground
Battery rated 650 C.C.A. at 0 degrees F
6. Control Panel
B-CAN instrument panel to include:
1. Full sunlight visible, 3.5” color display with easy touch buttons, rugged IP 67 rating and capable of being mounted outside the vehicle.
2. USB compatible. No special laptop computer or software required. Instrument panel can be re-flashed without being removed or sent into manufacturer for re-programming to reduce downtime.
3. Integrated I/O module and display module.
4. To include quick connecting harnesses with sealed connections.
5. B-CAN to offer end-user and service modes.
6. Monitor data through J1939 protocol that includes battery voltage, engine RPM, fuel rate, engine load, engine coolant temperature, engine oil pressure, engine coolant temperature, Hour meter and Air Pressure with safety shutdowns for Low engine oil pressure, High compressor oil temperature, High engine coolant temperature, minimum pressure valve, Automatic blow down valve.
7. B-CAN to log service intervals, shut downs and faults both active, summarized and historical.
8. Shut down limitations to three occurrences within 1 hour of running time. Compressor to be locked out after third occurrence and must be taken in
for servicing.
8. Compressor
Rated capacity of not less than 210 CFM free air delivered at minimum pressure of 100 psig when operating at rated speed.
1. Parts available locally.
2. Oil flooded and equipped with the following:
3. Oil flooded Rotary Screw design directly coupled to engine through flexible coupling.
4. Pressure regulation to be maintained within plus or minus 3% of setting at all working pressures. Capacity regulation shall be accomplished by varying both engine speed and controlling intake flow.
5. Air filter, separate from engine with restriction indicator.
6. Compressor oil filter
9. Air Receiver
ASME air/oil coded with safety relief valve
10. Operating Manual
Service and operating manual included with equipment.
11. Guarantee
The machine is warranted against defects due to faulty materials and workmanship for a period of one year after delivery and also have a two year unlimited hour warranty on the airend.
MINIMUM SPECIFICATIONS FOR BOSS MODEL FINAL TIER 4 250DUS
1. Scope
This specification covers diesel engine driven, skid mounted air compressors, complete with all accessories, hereinafter specified and required for a complete operating unit.
2. Manufacturer’s Standard Unit
As shown in current published literature.
3. Operation
The compressor shall be capable of satisfactory operation when tilted 15 degrees
in any direction.
4. Engine John Deere
4 cycle, 4 cylinders, diesel engine with reserve horsepower when operating compressor at rated capacity and pressure. Engine to have a minimum of 74 horsepower, John Deere 4045D, Final Tier/Stage IV4, not to exceed 2400-RPM maximum governed speed. Parts available directly from the manufacturer. Liquid cooled and equipped with the following:
Start position on engine control to allow engine and compressor oil to warm up
under Light load
Separate dry type air filter for engine and airend.
Spin on type full flow lubricating oil filter
Primary and Secondary Fuel filters
DEF, equipped with rain cap
5. Electrical System
Heavy-duty 12-volt negative ground
Battery rated 650 C.C.A. at 0 degrees F
6. Control Panel
B-CAN instrument panel to include:
1. Full sunlight visible, 3.5” color display with easy touch buttons, rugged IP 67 rating and capable of being mounted outside the vehicle.
2. USB compatible. No special laptop computer or software required. Instrument panel can be re-flashed without being removed or sent into manufacturer for re-programming to reduce downtime.
3. Integrated I/O module and display module.
4. To include quick connecting harnesses with sealed connections.
5. B-CAN to offer end-user and service modes.
6. Monitor data through J1939 protocol that includes battery voltage, engine RPM, fuel rate, engine load, engine coolant temperature, engine oil pressure, engine coolant temperature, Hour meter and Air Pressure with safety shutdowns for Low engine oil pressure, High compressor oil temperature, High engine coolant temperature, minimum pressure valve, Automatic blow down valve.
7. B-CAN to log service intervals, shut downs and faults both active, summarized and historical.
8. Shut down limitations to three occurrences within 1 hour of running time. Compressor to be locked out after third occurrence and must be taken in
for servicing.
8. Compressor
Rated capacity of not less than 250 CFM free air delivered at minimum pressure of 100 psig when operating at rated speed.
1. Parts available locally.
2. Oil flooded and equipped with the following:
3. Oil flooded Rotary Screw design directly coupled to engine through flexible coupling.
4. Pressure regulation to be maintained within plus or minus 3% of setting at all working pressures. Capacity regulation shall be accomplished by varying both engine speed and controlling intake flow.
5. Air filter, separate from engine with restriction indicator.
6. Compressor oil filter
9. Air Receiver
ASME air/oil coded with safety relief valve
10. Operating Manual
Service and operating manual included with equipment.
11. Guarantee
The machine is warranted against defects due to faulty materials and workmanship for a period of one year after delivery and also have a two year unlimited hour warranty on the airend.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- a large quantity of something
- examples of quantity of work
- quantity of work performance review phrases
- performance appraisal quantity of work
- quantity of work evaluation samples
- quantity of work samples reviews
- quality quantity of work examples
- quantity of work evaluation examples
- quantity of work review examples
- quantity of work performance phrases
- quantity of work evaluation phrases
- quantity of work performance evaluation