Delta Shower Door Measurement Guide
Delta Shower Door
Measurement Guide
Choosing the right Shower Door is as easy as 1-2-3. But before you customize your
dream door, you need to make sure you have the correct measurements.
Pivoting Shower Doors
? Identify Vertical and Horizontal Openings
Height (A) and Widths (B). Widths (B) measurements are often not the same so doors
can be adjusted up to 3/8".
B
? Vertical Opening
Measure from the top of the tub apron or the top of the threshold up to the top of the
acrylic (or tile) surround wall.
A
? Horizontal Opening
Measure width of opening at the top and the bottom of the enclosure.
? Sill Width
B
Measure the depth of the sill for installation. Each track style is has different sill depth
requirements:
Traditional: 2"
Contemporary: 2-7/8"
MOD 6mm: 2-3/4"
MOD 10mm: 3"
? Pivot
- Fits doors with opening minimum/maximum of 27 in. to 30 in. (69 cm to 76 cm),
with 64-3/4 in. (164 cm) of height.
- Needs clearance of 6+ inches above the top plate.
? Traditional
- Shower Door have two options. One with an opening minimum/maximum of 50-1/8
in. to 59-3/8 in. (127 cm to 151 cm) , with a 70 in. (178 cm) height. The second with
a minimum 43-3/8 in. to maximum 47-3/8 in. (110 cm to 120 cm) opening, with a 70 in.
(178 cm) height, walk-in width of 15-27/32 in. to 19-27/32 in. (40 cm to 50 cm).
- Bathtub Doors fit with an opening minimum/maximum of 50-1/8 in. to 59-3/8 in.
(127 cm to 151 cm), with a 58-1/8 in. (148 cm) height.
- Needs clearance of +2 inches above the final track height.
? Contemporary Tub:
- Shower Doors fit with an opening minimum/maximum of 50-1/8 in. to 59-1/2 in.
(127 cm to 149 cm) , with a 71 in. (180 cm) height.
- Bathtub Doors fit doors with an opening minimum/maximum of 50-1/8 in. to 58-1/2 in.
(127 cm to 149 cm), with 58-3/4 in. (149 cm) of height.
- Needs clearance of +(3/4) inches above the final roller height.
Sliding Tub Doors
B
A
B
NOTE: the height will be different
for shower doors vs. bathtubs.
? Mod Tub
- Shower doors fit with a minimum opening of 50-1/8 in. to a maximum of 58-1/2 in. and a height of 71-1/2 in .
- Bathtub door fit doors with a minimum opening of 50-1/8 in. to a maximum of 58-1/2 in. and a height of 59-1/4 in.
- Needs clearance of +2 3/4 inches above the final track height.
RECORD DIMENSIONS BELOW
Opening
Height (A):
Width of
widest point (B):
Width at
narrowest point (B):
**Disclaimers
? For ceramic tile application, use the top of the tile
for the maximum door height.
? In older homes the opening at the top is often wider
than the bottom due to an out-of-plumb condition.
? NOTE: All Delta Shower Doors are designed to
accommodate out-of-plumb conditions totaling 3/8¡±.
Need Additional Assistance with Delta Shower Doors?
Call us at 1.800.964.4850
Visit us at
Email us at customersolutions@
?2019 LHMC, A Masco Company
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- national health statistics reports
- delta shower door measurement guide
- bmi table for children and adolescents
- culvert manual cm 3 4 lrfd culvert design loads
- canceled airliner suspension height measurement 32 24
- health equipment loan program short term loan referral
- measuring volume and surface area real life examples
- powervault me4 series san das storage specification sheet
- spinning dials emcrit
- healthcare math converting measurements calculating
Related searches
- homemade shower door cleaner recipe
- diy shower door cleaner recipe
- delta shower mixing valve problems
- delta shower mixer valve problems
- delta shower mixer valve
- delta shower mixer valve installation
- delta shower mixer
- delta shower valves replacement
- old delta shower replacement parts
- delta shower mixing valve
- delta shower valve pex
- delta shower mixing valve cartridge