Your Name - KSU



Cover Letter

Dear Sir;

       I am graduated from King Saud University in manufacturing system engineering. I have done my B.S engineering from Institute of Quality and Technology Management, University of the Punjab, Lahore, Pakistan in Manufacturing engineering & Management. I have experience as an Manufacturing Engineer for three years, working with other Manufacturing Engineers within two textile sectors in Pakistan on the tasks and responsibilities of designing, developing, testing, and evaluating integrated systems for managing Manufacturing production processes. Inevitably, a well-trained and professional Manufacturing Engineer is highly needed to the growth and integrity of any industry. I am sure that I have the skills and the experience for which you’re looking for. I have also a teaching and research experience as a graduate assistant in King Saud University since last three years.

I would greatly appreciate an opportunity to convince you that my services would be an asset to your institute.

I assure you that a high level of efficiency would be applied to any assignment given to me. I hope my qualifications and experiences merit to your consideration. Thank you for kind attention, and I am looking forward to your reply. Here is attached my CV for the post of “Design and analysis engineer/Manufacturing/Mechanical engineer/QA/QC Engineer/Planning Engineer/Operation Engineer”.

Best Regards,

Tariq Aziz

+966502598343

MS Manufacturing System Engineering

King Saud University

Kingdom of Saudi Arabia

E-mails: taaziz@ksu.edu.sa "or" tariq_aziz_37@ "or" maliktariqaziz37@

RESUME

Tariq Aziz

tariq_aziz_37@

+966502598343

King Saud University, Industrial engineering department, Post Office Box 800

Riyadh 11421, Saudi Arabia

PERSONAL STATEMENT

I am professional Manufacturing engineer with three years production planning, process improvement and quality management experience of goods and services. I offer my skills for the challenging Position of Manufacturing Engineer in order to Design sequence of operations; work flow to improve efficiency and management of facilities and equipment layout. I have the competencies for applying resources in order to produce goods and services of the best possible quality in the most efficient way. I am able to improve profit; through eliminating wastes of time, money, materials, energy and other resources.

EMPLOYMENT

1. Graduate Research Assistant (2012-2015)

King Saud University, College of engineering,

Industrial engineering department, 11421,

Riyadh Kingdom of Saudi Arabia.



Job Description:

• Teaching undergraduate courses on “Advanced manufacturing process I&II.

• Under graduate final year project supervision and guidance

• Managed research activities by working with in a research project title on” Comprehensive Analysis Network for Multi-tasking Assessment of Performance”.

• Student assessment by exam grading on the basis of assignments, quizzes, homework and final exam.

• Invigilation during exam season

2. Assistant Manager Knitting operation (2011-2012)

Kamal Hosiery Mills Ltd, 3 KM Juhmra Road, 

Khurrianwala Faisalabad, Punjab, Pakistan.

ahsan@.pk

Tel: +92 41 436 2814-5

Fax: +92 41 436 2817



Jobs descriptions:

• Monitoring production process by drawing daily production schedule and maintenance of equipment.

• Ensuring timely production, cost effective and of optimum quality as prescribed by the customer

• Manufacturing resource planning on daily basis

• Estimating quality standards against each job orders and checking product standards and implementing quality-control programmes in case of variation

• Communicating among different departments, e.g. suppliers, and working with managers to implement the company's policies and goals.

• Supervising and motivating a team of workers and train them about health and safety guidelines.

• Reviewing worker performance; providing feedback and identifying training needs.

3. Process improvement engineer (2009-2011)

Masood textile mills Ltd, 32-Km Sheikhupura Road, Faisalabad.

Tel: (92-41) 4689471-73

Fax: (92-41) 4689469



Jobs descriptions:

• Developed efficient methods for each work content so that use of people, machines, materials, information, and energy would be better for better production of goods or service.

• Using Lean Manufacturing practices (5S, Kaizen, FMEA) and Problem Solving Techniques to maximizing the efficiency and performance and conducting training of workers for continuous improvement.

• To avoid production delays by solving the bottlenecks, machine delay and no work activities.

• Performed Gap Analysis in Processes, procedures, machine, equipment and worker's abilities.

• Determine most feasible plant and factory locations and layout for new extension

• Resolve daily production problems by minimizing the down time, stoppages and wastage of material and designed layout of equipment and work place.

• Estimated production costs which help in decision making and evaluated routinely the accuracy of production and testing equipment.

• Evaluated the effects of product design changes on utilization of machine capacity, manpower and time

EDUCATION

King Saud University

MS Manufacturing system engineering (2012-2015) CGPA 4.47/5.0

University of the Punjab

B.Sc. Industrial engineering and Management (2005-2009) CGPA 3.11/4.0

Master Thesis and projects:

• Master thesis on” Development of artificial finger joint implant using direct digital manufacturing technique (Electron Beam melting)”.

Bachelor Thesis

” Evaluation of Business Improvement through Quality Management Principles in Small and medium enterprises of Pakistan”.

Small projects

• Integration of Lean Six Sigma & Risk Management For Entertainment & Media Industry , Ministry of Culture and information Saudi Arabia , 2011.

• Study of Human Resource Practices in Pakistan (A case study of Trends Mobiles Pakistan) in May 2007.

• Designing and Manufacturing of “Pressure Measurement and Calibration system”2007.

Honors and Awards

• Obtained 5th position in King Saud University Fourth Scientific Symposium entitled in Research on "Minimizing Earliness and Tardiness Penalties with common Due Dates scheduling Problem ".

• Obtained 4th position in Fourth scientific conference in Mecca “Simulating queuing system of King Khalid University hospital using Arena software”.

• Member Debating Society Institute of Quality and Technology Management, University of the Punjab (2004-2009)

• Managed Class affairs effectively as Class Representative(CR) for five years(2004-2009)

Paper Published in Journal Proceedings

• Aziz, Tariq, and Ali Ahmad. “An Evaluation of Business Improvement through Quality Management Principles in SMEs.” International Journal of Quality and Innovation 2, no. 2 (2013): 193. doi:10.1504/IJQI.2013.057025.

• Ahmari A, Aziz T, Darwish S, Kawashgy H, Ahmed K "Effects of Motion Range On Patient’s Finger Joint Replacement" submitted

• Ahmari A, Aziz T, Darwish S, Kawashgy H, Ahmed K "stress distribution and implant capability in finger joint prosthesis" Submitted.

• Aziz T, Ahmari A, Darwish S, Kawashgy H, Ahmed K "Finger joint implants: A review" Submitted

Paper Published in Conferences Proceedings

• M. Alkahtani, T.Aziz, A.Ahmad, S.Darmoul” Multitasking In Healthcare Systems” Proceedings of the 2015 Manufacturing and Systems Engineering Research Conference S. Cetinkaya and J. K. Ryan, eds.

• T. Aziz, A. M. Al-Ahmari, S. Saied, Darwish Hazem Alkhwashki, "Finite Element Analysis of Finger Joint Implant: A Review": Advanced Manufacturing Institute, King Saud University, 11421, Riyadh, KSA, 2015, 5th international conference on Manufacturing engineering and operation management, Dubai at Hyatt Regency during March 3-5, 2015.

• Tariq Aziz, Ibrahim M. Alharkan and Mohammed Hatem "Minimizing Earliness and tardiness penalties with common due dates scheduling Problem "Proceeding of 5th international conference on Industrial engineering and operation management, Dubai at Hyatt Regency during March 3-5, 2015.

• Tariq Aziz, Ibrahim M. Alharkan and Mohammed Hatem "Simulating King Khalid University Outpatient Hospital Pharmacy" Proceedings of 5th international conference on Industrial engineering and operation management, Dubai at Hyatt Regency during March 3-5, 2015.

• Adel A. Alharthi, Mohammad A. Sharaf, Tariq Aziz, "An integrated approach to lean six sigma and risk management in entertainment and media industry”. Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management Bali, Indonesia, January 7 – 9, 2014.

KEY SKILLS

Core Competencies

• Good analytical and problem solving skills.

• Well organized and flexible: Ability to deal with dynamic environment.

• Communication and customer handling skills.

Technical Skills

|Solid works & Auto CAD |Minitab |SPSS |Hyper works |MS Office |

|Microsoft project management Primavera |CATIA |ANSYS |MS Visio |Microsoft Project |

Testing and Q/A Q/C Management skills

• Developed QA Plan and Manual regarding planning of all the tasks against standards and work on conceptual design of process development.

• Risk assessment and non-conformance investigation regarding quality of product

• Directed workers involved in inspection and testing activities to ensure quality and reliability.

• Supported the employees in setting yearly Quality Objectives and Key Performance Indicators.

• Performed QA/QC Checks, audits and review

Production Management skills

• Planning and prioritizing tasks and monitoring, organizing the workflow of man machine methods and people in order to achieve efficiency.

• Operation monitoring and instantaneous decision making

Certificates

• Six Sigma green belt (Integral management Quality Solution Inc. training Institute Florida U.S.A on 24th September 2012) Certificate Issuing ID(GB-SR-12-639)

• Professional development as a best student of the tenure form Institute of Quality & technology Management (2004-2009).

• Certificate of Industrial engineer (Pakistan engineering council 2009)

• Hajj volunteer certificate

• Research competition certificates from(King Saud university)and ministry of higher education Saudi Arabia

Memberships

Pakistan engineering council (2009-Present)

PERSONAL INTERESTS

Learning software’s | Reading books |Playing cricket |Research interest in product design & development

REFERENCES

1. Prof Dr. Ali Alsamhan

Industrial Engineering Department, College of Engineering, King Saud University,

Email: asamhan@ksu.edu.sa // drali@; Tel: +966504420700; Fax 966-1-4678657;

Web: fac.ksu.edu.sa/asamhan

2. Dr. Saqib Anwar

Industrial Engineering Department, College of Engineering, King Saud University,

Email: sanwar@ksu.edu.sa Tel: +966557643245; Fax 966-1-4678657

Web:

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download