PWRview™ Owner’s Manual - Electric Generators Direct

?

PWRviewTM

Owner's Manual

For PWRviewTM Automatic Transfer Switch

200 Amp Service Entrance

Model Number RXEMW200A3

SERIAL NUMBER: _________________________ DATE PURCHASED:________________________

WWW. 888-436-3722

Para espa?ol , visita:

SAVE THIS MANUAL FOR FUTURE REFERENCE

WARNING

CANCER AND REPRODUCTIVE HARM P65Warnings..

(000393a)

ii

Automatic Transfer Switch Owner's Manual

Table of Contents

Section 1: Safety

Introduction ..........................................................1

Read This Manual Thoroughly ....................................1

Safety Rules .........................................................1 Electrical Hazards ................................................2 General Hazards ..................................................3

Section 2: General Information

Unpacking ............................................................5 Equipment Description .......................................5

Transfer Switch Mechanism ........................................5 Utility Service Circuit Breaker (if equipped) .................5

Transfer Switch Data Decal ................................6 Transfer Switch Enclosure .................................6 Safe Use of Transfer Switch ...............................6 Load Management Options .................................6

Smart A/C Module (SACM) .........................................6 Smart Management Module (SMM) (50 amp and 100 amp sold separately) .......................7 Application Considerations ..........................................7

Section 3: Installation

Introduction to Installation .................................9 Mounting ...............................................................9 Open Enclosure ...................................................9 Connecting Power Source and Generator Power Supply .....................................................10 Connecting Start Circuit Wires .........................11 Connecting SACM .............................................11

Control of Air Conditioner Load .................................11

Auxiliary Contact ...............................................13 Fault Current Label ............................................13 Installing PWRview Antenna ............................14 Connecting PWRview CTs ................................14

Section 4: Operation

Functional Tests and Adjustments .................. 15 Manual Operation .............................................. 15

Close to Utility Source Side .......................................15 Close to Generator Source Side ...............................16 Return to Utility Source Side .....................................16

Voltage Checks .................................................. 16

Utility Voltage Checks ...............................................16 Generator Voltage Checks ........................................16

Generator Tests Under Load ............................ 16 Checking Automatic Operation ........................ 17 Installation Summary ........................................ 17 Shutting Generator Down While Under Load or During a Utility Outage ................................. 17 Preparing for Maintenance ............................... 18 Testing The SACM ............................................. 18 SACM Fuse Service ........................................... 18 Testing The SMM ............................................... 18 PWRview Monitor Operation ............................ 18 PWRview Monitor Reset ................................... 19 PWRview Fuse Replacement ........................... 19

Section 5: Drawings and Diagrams

Installation Drawings ........................................ 21

No.10000012171: 150/200A SE ................................21

Interconnection Drawings ................................ 22

No. A0000485206--Liquid-Cooled Generator ..........22 No. A0000485221, SE and non-SE Rated ATS--Air-Cooled Generator .....................................23

Automatic Transfer Switch Owner's Manual

iii

This page intentionally left blank.

iv

Automatic Transfer Switch Owner's Manual

Safety

Section 1 Safety

Introduction

Thank you for purchasing a Generac Power Systems Inc. product. This unit has been designed to provide high performance, efficient operation, and years of use when maintained properly.

Read This Manual Thoroughly

WARNING

Consult Manual. Read and understand manual completely before using product. Failure to completely understand manual and product could result in death or serious injury. (000100a)

If any section of this manual is not understood, contact the nearest Independent Authorized Service Dealer (IASD) or Generac Customer Service at 1-888-436-3722 (1-888-GENERAC), or visit for starting, operating, and servicing procedures. The owner is responsible for proper maintenance and safe use of the unit. SAVE THESE INSTRUCTIONS for future reference. This manual contains important instructions that must be followed during placement, operation, and maintenance of the unit and its components. Always supply this manual to any individual that will use this unit, and instruct them on how to correctly start, operate, and stop the unit in case of emergency.

WARNING

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

(000002)

CAUTION

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

(000003)

NOTE: Notes contain additional information important to a procedure and will be found within the regular text of this manual. These safety alerts cannot eliminate the hazards that they indicate. Common sense and strict compliance with the special instructions while performing the action or service are essential to preventing accidents.

Safety Rules

The manufacturer cannot anticipate every possible circumstance that might involve a hazard. The alerts in this manual, and on tags and decals affixed to the unit, are not all inclusive. If using a procedure, work method, or operating technique that the manufacturer does not specifically recommend, verify that it is safe for others and does not render the equipment unsafe.

Throughout this publication, and on tags and decals affixed to the unit, DANGER, WARNING, CAUTION, and NOTE blocks are used to alert personnel to special instructions about a particular operation that may be hazardous if performed incorrectly or carelessly. Observe them carefully. Alert definitions are as follows:

DANGER

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

(000001)

Automatic Transfer Switch Owner's Manual

1

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download