Operator’s Manual
INDEX
NEXT
HOME
Operator's Manual
MANSLASH ? REV J 26/10/07
Rotary Slasher Range
3PL Slashers Vineyard Slashers Pasture Toppers
SAFETY WARNING:
PLEASE READ THIS MANUAL THOROUGHLY BEFORE ATTACHING OR OPERATING THE SLASHER.
INDEX
BACK
NEXT
HOME
SILVAN AUSTRALIA PTY. LTD. ABN 48 099 851 144
VICTORIA (HEAD OFFICE)
NEW ZEALAND
Telephone: +61 (03) 9887 2788 Facsimile: +61 (03) 9887 1035
FREECALL 0508 SILVAN (0508 745 826) silvannz.co.nz
No liability can be accepted for any inaccuracies or omissions in this publication, although due care has been taken to make it as complete and accurate as possible.
The information, illustrations and technical data were considered to be correct at the time of preparation.
In accordance with our policy of continuous development Silvan Australia Pty. Ltd. reserves the right to make changes at any time without notice.
YOUR ROTARY SLASHER DETAILS Record the details of your Rotary Slasher here for future reference when discussing service with your Silvan dealer, ordering service parts or making a warranty claim.
MODEL _____________________________
SERIAL NO. _____________________________
ATTACHMENTS ________________________________________________
DATE OF DELIVERY SELLING DEALER ADDRESS TELEPHONE NO. INSTALLED BY
_____________________________ ________________________________________________ ________________________________________________ _____________________________ _____________________________
INDEX
BACK
NEXT
HOME
Introduction
Silvan Australia Pty. Ltd. is an Australian owned company specialising in the supply of equipment to primary producers. A leader in the design of agricultural sprayers and associated equipment, the company was established in 1962 and has grown to become the largest manufacturer and supplier of crop protection equipment in Australia.
At Silvan we are extremely proud of our reputation for quality products backed by quality service. Your investment in a Silvan product is an investment in quality.
This manual covers all models of Silvan rotary slashers, vineyard slashers and pasture toppers including those listed below.
Cutting Widths (Metres)
3 Point Linkage General Purpose and Medium Duty
40HP
0.85 to 1.47
Heavy Duty Heavy Duty
75HP 100HP
1.47 to 2.01 1.47 to 2.01
Field Boss
Contracting Contracting Contracting & Shireboss
75HP
75HP 100HP 130HP
1.47 to 1.75
1.82 to 2.12 1.82 to 2.12 1.82 to 2.12
Side and rear discharge
Vineyard
Pasture Topper - Twin 60HP Pasture Topper - Twin 75HP
75HP 75HP
1.75
1.82 to 2.30
2.40 to 3.00 2.40 to 3.60
Silvan rotary slashers are designed and manufactured to provide a high standard of performance and safety. To ensure continued safe and efficient operation of your slasher, you need to read this manual thoroughly and fully familiarise yourself with all aspects of the machine's operation, maintenance and safety procedures.
Now that you are a proud Silvan owner, all our services and dealer support is available to you should you need them. We assure you of our best attention at all times.
PLEASE NOTE: Because of the machine's configuration and method of operation, particularly the rotating blades, rotating driveline and resultant debris ejection, all slashers are inherently dangerous. For this reason, pay particular attention to the safety instructions contained within this manual.
1
INDEX
BACK
NEXT
HOME
Contents
Warranty About Your Warranty Warranty Policy
Safety information
Specifications
Operation
TPL Positions General Purpose, Fieldboss &
Medium Duty Models
Linkage Models Attaching to Tractor, Connecting PTO
Setting Cutting Height
Hydraulic Hoses.
All Models
Operating the Slasher, Slip Clutch
PTO Safety Guards
Vineyard Models
Pasture Topping Models
Operation General
Lubrication and Maintenance
Page
2 3
4
6
7 9 9 10 10 11 11 12
13
15
About Your Warranty
Silvan Australia Pty. Ltd. builds equipment to a high level of specification using components from quality suppliers. The following information is provided to assist you with any repairs required within the warranty period.
? All warranty repairs on Silvan products are carried out by Silvan dealers. If any warranty repairs are required on Silvan products, it is recommended that the product be returned to the place of purchase.
? It is good practice to keep a record of equipment maintenance both during and after the warranty period.
The following information on warranty coverage explains the extent and limitations of your Warranty coverage on Silvan Products.
2
INDEX
BACK
NEXT
HOME
New Product Warranty
Warranty
This warranty is the only warranty applicable to Silvan new products ('Products') and, to the maximum extent permitted by law, is expressly in lieu of any other conditions or warranties expressed or implied in relation to the Products. Subject only to legislative obligations to the contrary, Silvan shall not be liable for incidental or consequential damage resulting from ownership or use of a Product. Silvan does not authorize any person to create for it any other obligation or liability in connection with these products.
Silvan warrants its authorised Dealer, who in turn warrants the original purchaser (owner) of each new Silvan product that it will repair or replace the product, or, pay the cost of repair or replacement, as determined by Silvan without charge for labour or any defective or malfunctioning parts in accordance with the warranty limitations and adjustment schedule below. The warranty period begins on the date the product is delivered to the first retail purchaser for a period of 12 months
This Warranty Covers
Only conditions resulting directly from defects in workmanship or material under normal use and service.
Warranty Exclusions
The Warranty does not cover:
Conditions resulting from misuse, use of incompatible chemicals, exceeding machine specifications including overloading, impact damage, negligence, accidental damage or failure to perform recommended maintenance services. Any product which has been repaired by other than an authorised Silvan service outlet in a way which, in the sole and absolute judgement of Silvan, adversely affect its performance or reliability. The replacement of maintenance items such as diaphragms, batteries, V belts and ground engaging components, etc. Loss of time, inconvenience, loss of use of the product liability to third parties or any other consequential damages. Incidental costs associated with a warranty repair including any travel costs, out of hour's labour charges, cleaning costs, transportation costs, freight costs or any communication costs.
The repair of a defective product qualifying under this warranty will be performed by any authorised Silvan service outlet within a reasonable time following the delivery of the product, at the cost of the owner, to the service outlet's place of business. The product will be repaired or replaced, using new parts supplied by Silvan. Silvan, in its absolute discretion, may choose to pay the cost of replacement or repair of the product.
The owner is responsible for the performance of regular maintenance services as specified in the Owner/Operator Manual applicable to the product. Failure to carry out regular maintenance may invalidate warranty
3
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- florida dep operator certification program
- pa dep operator certification
- fdep operator certification
- brain driver s ed operator s guide
- manual j s d software
- us army m17 operator s manual
- tm 9 1005 319 10 operator s manual
- air force airman s manual pdf
- minnesota driver s license manual study guide
- pa driver s manual 2018
- driver s manual spanish
- cpt manual or cms manual coding instructions