VW/Audi Tools



VW/Audi Tools

1. VAG-COM 912 diagnose (update online)

KW: vag com 912, vag com, vag com912, vagcom908, vag diagnostic tools, vag diagnostic tools, seat diagnostic tools, audi diagnostic tools. Skoda diagnostic tools, diagnostic cable

Part No.: D019

Weight: 0.3 KG

Update online and support senior functions, such as basic setting, read list. And it can read more than 200 data stream now, but 805 can only read the first six data stream. It is the updated version for VAG-COM 912!

Work with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including KKL and CAN-BUS.

Functions:

• Full support for control modules using the new "Service 22" identification methods.

• Support for control modules using the new UDS/ODX/ASAM protocol.  

The following functions are supported:

Control Module ID (including Advanced ID), Coding, Security Access, and Fault Codes.

• New Session Log capabilities.

• Support for Generic OBD-II Mode 10.

• Support for vehicles with dual ECUs, or example the RS4 and W12 engines. 

Both ECUs are accessible simultaneously via address 31 for Basic Settings such as TBA.

• Revised Adaptation screen to support the much longer Long Adaptations now appearing in some control modules.

• Revised Advanced ID screen for increased flexibility handling the various data items appearing in the latest control modules.

• New internal Gateway Coding Assistant (required for Audi B8 platform cars).

• Much improved documentation (Label Files) for many older cars

2. Super VAG K+CAN Commander 4.8

KW：super vag k can, super vag k + can, vag k+can commander, super vag k+can commander, super vag handhelder, vag k+can commander 7.1, vag diagnostic tools

Part No.: MF004

Weight: 0.8KG

Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.

Manual definition of running diagnostic session ¡¡ not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.

Broadcast diagnostic request ¡¡ disable normal communication, clear DTCs, Logistic (transport) mode,.... Functions are under CAN-TP2.0.

Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.

Most of popular diagnostic requests ¡¡ identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0.

Special function - odometer correction in instrument clusters and EDC15x.

Special function - read Security Access Code/Login WFS.

Special function - read/program immobilizer data.

Special function - read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.

Special function - VAG MMI TV Activation.

Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME 7.1.1 , VAG-Cartronic ME7.8,Porsche.

Special function - Key learning buttons for easy usage (not needed security code). Can do component security authorization.

Special function - Key learning Porsche CAYENNE (not needed security code) K+ CAN.

Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..

Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories

Special function - Crash data clear in airbag units

3 VAG K+CAN COMMANDER 3.6

(Diagnostic via CAN and Special functions via K-line )

KeyWords: vag k can commander 3.6, vag cables, vag repair tool, saudi vw activator porsche, vag k can commander

Part No.: MF 004

Latest update: A4, A8 - mileage correction and airbag reset.

Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.

Manual definition of running diagnostic session ¡¡ not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.

Broadcast diagnostic request ¡¡ disable normal communication, clear DTCs, Logistic (transport) mode,.... Functions are under CAN-TP2.0.

Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.

Most of popular diagnostic requests ¡¡ identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0.

Special function - odometer correction in instrument clusters and EDC15x.

Special function - read Security Access Code/Login WFS.

Special function - read/program immobilizer data.

Special function - read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.

Special function - VAG MMI TV Activation.

Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME 7.1.1 , VAG-Cartronic ME7.8,Porsche.

Special function - Key learning buttons for easy usage (not needed security code). Can do component security authorization.

Special function - Key learning Porsche CAYENNE (not needed security code) K+ CAN.

Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..

Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories

Special function - Crash data clear in airbag units

4 VAG-COM 908

KeyWords: vag com, vag com 908， vag 908， vag 912， vag diagnostic， vag interface，vas5054a，vag 908.1, vag 908 cable, lrexia-3, vag k+can, launch x431

Part No.: C 011

VCDS V908, VAG COM 908, BETA V908

Release 908.0 posted 30 August 2009, it is the latest version of VAG-COM812.4.

Supports Measuring Values, Output Tests, and Adaptations on control modules using the new UDS/ODX/ASAM protocol.

Adds new UDS addresses and updated ODX data for 2010 models.

Includes support for TP1.6 protocol which is required for the 6J Ibiza and speeds up access on many modules in other models.

The Select Control Module screen now shows "Installed Modules" rather than "Common Modules" if the car being worked on is new enough to have a proper CAN Gateway.

Modified SRI Screen to show more info and force user to select a job before proceeding.

Adds drop-box function selection in Basic Settings and Adaptation.

Reads Mileage stored in many EDC16 ECUs.

New CODES file, now with over 13,000 fault code and measuring value texts.

New USB drivers for enhanced PC compatibility and stability.

New firmware for HEX interfaces required for compatibility with 6J Ibiza

Updated Label files; better documentation for new and existing models.

908 & 812.4 comparison:

908 can match Airbags under the protocol of UDS while the 812 can only read/erase trouble code and do coding, and it cannot match airbags. Please check the comparison in the following pictures. The icons of 908 are activated while the ones of 812 are not.

The new models that VW launches now or in the future, such as New Bora and Lavida will all use UDS protocol. Besides, the VAS5054 in the market nearly doesn't support UDS protocol.

In one word, if you want to match Airbags of new models, the 908 is your only choice.

5 VAG CAN COMMANDER 5.5 + PINReader 3.9

KeyWords:vag can commander v5.1, vag commander v5.1, vag k+can 5.1, v5.1, pin reader, pin reader 3.9

Part No.: MF 002

Diagnostic tool for cars from Volkswagen Audi Group which using WP2000-CAN TP2.0

Audi Q7 and Audi A6 - odometer correction

Full support of Audi A3/A8 - security code reading and odometer correction via OBDII

WRITE/READ EEPROM of dashboard via OBDII

MMI TV activation

Features:

Odometer correction via OBDII

Special functions about instrument clusters from VDO which allows changing of odometer value, reading security access code of immobilizer, reading eeprom and flash memory of instrument cluster.

TV-Activation function for MMI based vehicles (Audi A8, Audi A6, Audi Q7)

Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools

Manual definition of running diagnostic session ?not like remaining diagnostic tools always standard diagnostic session 0x89

Broadcast diagnostic request ?disable normal communication, clear DTCs, Logistic (transport) mode,...

Allows managing of brand new immobilizer units where is allowed programming of PIN, SKC, BGW, MAC.

Most of popular diagnostic requests identifications, coding, adaptations, DTCs and so on.

List of covered vehicles from function odometer change/security code reading:

VW Golf5

VW Jetta (MY2006)

VW Caddy

VW Crossgolf

VW Touaran

VW EOS

VW Individual

VW Passat platform B6 (MY2006)

Seat Toledo (CAN)

Seat Leon (CAN)

Seat Altea

Seat Altea XL

Skoda Octavia II

Skoda Scout

Skoda Roomster

Audi A3

Audi A8

Audi A6 - odometer correction

Audi Q7 - odometer correction

Kombiinstrument / Immo box reader and programmer, VAG kilometers programm and change via OBD II connector! You can choose USB or COM 1 port connection to OBD II port! Works on any computer with Windows installed. Car models covered by Pin Reader software:

VW GOLF IV VDO 1998-2005

VW GOLF IV Bosch/MotorMeter petrol/diesel ECU ?2001-2005

VW GOLF IV, BORA/JETTA, PASSAT Motor Meter - 1997-2000

VW PASSAT VDO B4, B5 & B6 1998-2005

VW PASSAT Bosch/MotorMeter petrol/diesel ?2001-2005

VW BORA - JETTA VDO 1998-2005

VW BORA - JETTA Bosch/MotorMeter petrol/diesel ?2001-2005

VW POLO VDO 2002-2006

VW BEETLE Magnetti Mareli 1998-2005

SKODA OCTAVIA Motor Meter - 1997-2005

AUDI A3, A4, A6, TT 2000+ & TT USA Magnetti Mareli

AUDI A3 VDO 1997-2003

AUDI A4 VDO 1998-2005

AUDI A4 Bosch/MotorMeter dashboard petrol/diesel 2001-2005

AUDI A4, A6, A8 External Immo Box (system 1) 1995-1998

SKODA FABIA VDO 2000-2006

SKODA OCTAVIA VDO 1997-2005

SKODA OCTAVIA Bosch/MotorMeter petrol/diesel ECU ?2001-2005

KIA/HUYNDAI 6 digits pin code calculator from VIN number for models after2000

6 DMW3 for VW/AUDI/ SKODA/SEAT

KeyWords:dmw3, auto scanner, code reader, code scanner, obd ii code reader, obd iiobd ii scanner, obd

Part No.: MF 007

Online update

DMW3 is a new version hand-held car code reader for Audi Volkswagen cars. It supports almost all control module for Audi Volkswagen cars including the KWP1281 (K-Line), KWP2000 (K-Line), as well as KWP6000 CAN Bus) protocol. it can also change odometer, read anti-theft code, diagnose and program keys.

I: Diagnosis(KWP1281, KWP2000, KWP6000)

1. read of control unit

2. fault code

3. the fault code

4. implementation of component testing

5. data stream

6. basic setting

7. unit coding

8. adjustment

9. log in and authorization

II: Odometer Correction(K-line, CAN BUS)

1. VDO instruments (K-Line and CAN BUS)

2. Motometer dashboard (K-Line)

3. Marelli dashboard (CAN BUS)

4. Bosch dashboard (K-Line)

III: Anti-theft code reader (IMMO1, IMMO2, IMMO3, WFS)

1. read the password for engine control unit

2. read password for anti-theft box

3. read password for dashboard

IV: Key matching

1. control unit of anti-theft box

2. the dashboard control unit

3. Kessy control unit

Those above function doesn't cover all Audi Volkswagen cars. Some are not supported by DMW3.

Use the numeric keys of the keyboard 0-9: to enter the mileage, anti-theft password, data stream group number, channel number, etc. match. The numeric keys can also directly select the corresponding menu item.

Arrow keys: used to scroll the menu to change the data flow group number and channel number, adjust the digital input and so on.

Function keys: ESC to cancel the current operation OK to confirm the current operation. F1 and F2 for the confirmation of the special operation. Specific application can refer to the operation of each function description.

Software upgrade: DMW3 in-line mode DMW3 through the computer to read the sequence number, sequence number sent to the supplier to obtain the appropriate upgrade

7 V-checker Reader Volkswagen with CANBUS

KeyWords:v-checker reader for vw with canbus, code readers, maintenance, repair tools, bus systems, v-checker reader, canbus, code scanner, diagnostic equipment

Part No.: CR 004

This is a powerful, affordable handy scanner designed for all VW, AUDI, SKODA, and SEAT vehicles . It is small in size, robust in design, competitive in price and easy to use. With only 10% of the cost of a large special tool, it can nearly do the same work as that of a VAG1551/1552, or VAG-COM interface plus software. This is a stand alone unit; it does not need a laptop computer to operate.

Features:

- Low price: the price is only about 10% of that for a large special tool

- Powerful functions: it can nearly do the same work as that of a VAG1551/1552, or VAG-COM interface plus computer

- Powered via diagnostic connector, no additional power is needed

- Hand held too, no computer is needed

- High reliable and accurate

- With large LCD display: the trouble code description will be displayed directly on the screen, no need for search it in the user's manua

- With extension cable, comfortable for operation

- With live data or data stream function

- With large DTC database

Main Functions:

- Control Unit Information

- Read Fault Codes

- Measuring Blocks

- Clear Fault Codes

- Basic Setting

- Adaptation

- Independent Channel Value

- Output Tests

- Coding Control Unit

- Login

- Service Oil Reset

- Code Modes

- Dealership Code Set

Support Protocol:

- KWP1281

- KWP2000

- CAN BUS

Specifications:

- Port: 16-pin OBD II socket

- Display: 128 x 64 LCD

- Power: Directly supplied by diagnostic socket

Applications:

This item is a mini diagnostic scanner for VW / AUDI / SEAT / SKODA vehicles. It can be used by car owners as well as repair shops.

Language:

English / Spanish / Polish / Finland / Czish / Hungary / Russian / Germany/French, ect

Package Includes:

- One scanner with 16PIN Extension Cable

- Operating Manual

- Original package

8 V-checker For Volkswagen w/o CANBUS

KeyWords:v-checker reader for vw with canbus, code readers, maintenance, repair tools, bus systems, v-checker reader, cranbus, code scanner, diagnostic equipment

Part No.: CR 005

If your car's Check Engine Light is on, you need this device. V-checker is a handy device for reading and erasing trouble code in your vehicles. It can also display live data for your vehicle. It is small in size, robust in design, competitive in price and easy to use. This is a stand alone unit, it does not need a laptop computer to operate.

By simply connecting V-checker with the diagnostic socket, the user will be able to read the trouble code. The trouble code description will be displayed directly on the screen, no need for search it in the user's manual. Each code will be continuously displayed until the [PREVIOUS] or [NEXT] key is pressed. This is a important advantage to compare with the old type trouble code reading tools.

Features:

With large LCD display: the trouble code description will be displayed directly on the screen, no need for search it in the user's manual

Each code will be continuously displayed until the [↑] or [↓] key is pressed. This is an important advantage to compare with the old type trouble code reading tools

With extension cable, comfortable for operation

Work with all VW , AUDI, SKODA, SEAT except CAN-BUS

Service reset functions for OIL/IN1/IN2

Support KWP2000,KWP1281 protocol

Support all 78 systems for VW , AUDI, SKODA, SEAT vehicles

Powered via diagnostic connector, no additional power is needed

Plug and play, ease to use

Turn off check engine light

High reliable and accurate

Specifications:

- Port: 16-pin OBD II socket

- Display: 128 x 64 LCD

- Power: Directly supplied by diagnostic socket

Functions:

- Read Trouble Code

- Erase Trouble Code

- Reset 0IL service (OIL, IN1, IN2)

9 MaxScan VAG405 OBD II EOBD CAN BUS for VW/Audi

KeyWords: vag405 scanner, maxscan code scanner, vag405r code scanner, vag 405 code reader, auto code scanner, auto code reader

Part No.: CR 009

The Max Scan VAG405 code scanner is an OEM level diagnostic scan tool for most VW/AUDIs sold worldwide since 1990 to present INC CAN BUS. Accurate, reliable and easy to use, It can access MOST modules, the Max Scan VAG405 is a time saver and a money maker!

It also doubles up as a Generic OBD2 fault code reader for most other manufacturers.(Engine DTC Check)

Features & Benefits:

1. Works with Volkswagen and Audi (Audi/Seat/Skoda/Jetta/Golf/Beetle/Touareg/GTI/Passat and more) sold worldwide since 1990.

2. Reads and erases Diagnostic Trouble Codes (DTCs) of most electronically controlled vehicle modules, including Engine, ABS, Airbags, Transmission, Radio, Climate Control(A/C), Cent. Elect. Steering Wheel, Instruments, Immobilizer, etc.

3. Reads and clears generic trouble codes of cars using ISO 9141-2 (CARB), ISO 14230 (KWP-2000) and ISO-15765 (CAN) protocols.

4. Turns off MIL lights of engine, airbags, ABS , A/T and most other systems

5. C.A.N.(Controller Area Network) Capability

6. Resets oil service light

7. Retrieves vehicle information (VIN)

8. Displays I/M Readiness Status.

9. Displays DTC definitions on Unit Screen

10. Highly reliable and accurate

11. Easy to use with friendly interface

12. Safely communicates with the on-board computers

13. Large, easy-to-read backlit LCD

14. System Upgradeable via internet

15. Stand-alone unit with no need for an additional laptop computer to operate. This Tool performs as a FULL diagnostic tool for VAG range and as a Generic Fault Code Reader for other Vehicles that are OBD2 compliant.

Package Includes:

MaxScan VAG 405 Hand-Held Scanner

16 Pin OBD 2 Data Link cable

User Manual

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download