Quick Install Guide - Ixia

Quick Install Guide

I2BP-40

800-0228-001 Rev A 12/13

PLEASE READ THESE LEGAL NOTICES CAREFULLY.

By using the Net Optics iBypassTM 40G Switch, you agree to the terms and conditions of usage set forth by Net Optics, Inc.

No licenses, express or implied, are granted with respect to any of the technology described in this manual. Net Optics retains all intellectual property rights associated with the technology described in this manual. This manual is intended to assist with installing Net Optics products into your network.

Trademarks and Copyrights

?2013 by Net Optics, Inc. Net Optics is a registered trademark of Net Optics, Inc. iBypass is a trademark of Net Optics, Inc. Additional company and product names may be trademarks or registered trademarks of the individual companies and are respectfully acknowledged.

Additional Information

Net Optics, Inc. reserves the right to make changes in specifications and other information contained in this document without prior notice. Every effort has been made to ensure that the information in this document is accurate.

2

Contents

iBypass 40G Switch Content

4

iBypass 40G Switch Overview

5

Connect Power

8

Connect Options

10

Configure the IP

14

Assign IP in Web UI

16

Connect to the Network

18

Connect Monitoring Tools

19

3

iBypass 40G Switch Content

This guide provides the initial steps to set up and configure the Net Optics iBypassTM 40G Switch. Carefully unpack the contents and verify you have the following components:

? iBypass 40G Switch ? 3-meter RJ45, CAT 5e 4-pair ? RJ45 to DB9 Console Port to PC cable ? Long Ear Extender and Short Ear Extender for rack mounting ? Two External Power Supplies (12VDC, 9A, 108W) ? Eight Phillips screws ? iBypass 40G Switch Quick Install Guide (this document) ? iBypass 40G Switch User Guide (on CD) ? End User Agreement, Registration Card and Extended Warranty (if purchased)

The QSFP+ transceiver kits and 40G MTP cables are sold and shipped separately. Contact Net Optics Technical Assurance Center if any component is missing or damaged. Contact details are at the back of this guide.

4

iBypass 40G Switch Overview

Management Port

Monitor Ports

Network Ports

2x16 Character Display

Console Port

Activity & Alarm Bypass, Tap, Power

LEDs

LEDs

Figure 1 - Front View

? Console Port (RJ45) and Management Port (RJ45) ? 2 x 40G Monitor Ports (uses QSFP+ transceivers ) ? 2 x 40G Network Ports (MTP Connectors)

Figure 2 - Rear View ? Hot swappable fans and replaceable power module

5

Step 1 Rack Mount iBypass 40G Switch

Install the iBypass 40G Switch into a standard 19-inch equipment rack. The switch is designed to occupy one rack unit. Do the following to install the iBypass 40G Switch into an equipment rack:

1. Remove the Ear Extenders and screws from the shipping bag. 2. Attach the Long Ear Extender to the switch if you are only mounting one switch

or attach the Short Ear Extender between two switches if you are mounting two switches. See Figure 3. 3. Slide the switches in place in the rack. 4. Fasten the switches in place at the front panel ears using the Phillips screws. 5. Make sure the rack is properly electrically grounded.

Grounding

Ground the chassis to the rack by connecting a 14 AWG minimum ground wire with a #8 ring lug to the ground connection on the rear of the chassis. Terminate the other end of the ground wire to the rack ground bus bar.

6

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download