To obtain the IP address of your Sharp MFP

HOW TO OBTAIN THE IP ADDRESS OF YOUR SHARP MFP

Models: MX-M283N/MX-M363N/MX-M453N/MX-M503N/MX-M623N/MXM753N,MX-2600N/MX3100N/MX-4100N/MX-4101N/MX-5001N, MX-6201N/MX7001N/MX-B401/MX-C311/MX-C401, MXB402/MX-B402SC/MX-C402SC

To display IP address on panel: Note: This procedure requires the MFP to be connected to the network and have the network scanner kit installed. Some MFP models have scanning as a standard feature and some other MFP models require the option to be added. 1. Press the Image Send button on the MFP. 2. Press the tab labeled PC Scan (you may need to touch the Condition Settings button

to see the PC Scan button) and the MFP will display the IP Address. 3. Press Exit and then Yes to exit the PC Scan Mode.

To print a report of IP: All other model machines: (ARs and some MX not listed above) 1. Press: System Settings (Custom Settings for older models). May have to enter

"admin" as password. 2. Touch: List Print. 3. Touch or Select: "Print test page". 4. Choose "Nic page"; will 2 pages ? 1st page will have IP address

Model MX3140 (and models with tablet style interface)

To print a report of IP: 1. Press the Home button. 2. Touch the Settings icon on the touch panel. 3. Press: System Settings (Custom Settings for older models). May have to enter

"admin" as password. 4. Touch: List Print. 5. Touch or Select: "Print test page". 6. Choose "Nic page"; will 2 pages ? 1st page will have IP address

IP address of network expansion kit: Some models (smaller) have a network expansion kit (AR-NB2 or AR-NB3). To obtain the IP address from these, press and hold the small black button located just above the ethernet jack (rear left side of the machine if standing in front) for at least 5 seconds.

Where to locate IP address on report: Note: The IP address location will be on either the top right side of the 1st page (some models will only print 1 page) or bottom left side. Look for "IP Address" or "IPv4 Address". If dashes are displayed, then the machine's ethernet cable may be unplugged from the machine. Verify a good cable is plugged in to the MFP and to a live (active) data port (jack) in the wall, switch, modem or router. The ethernet jack on the MFP should have a link light (green) and blinking light (amber) to show network activity.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download