How to Boot or Shutdown Specific PeopleSoft Application ...
How to Boot or Shutdown Specific PeopleSoft Application Server Components
Shutdown for a Group Of Processes
1. Start psadmin
2. Go to the PeopleSoft Domain Administration Menu and select option 5.
--------------------------------
PeopleSoft Domain Administration
--------------------------------
Domain Name: DCCRKR
1) Boot this domain
2) Domain shutdown menu
3) Domain status menu
4) Configure this domain
5) TUXEDO command line (tmadmin)
6) Edit configuration/log files menu
7) Messaging Server Administration menu
q) Quit
Command to execute (1-7, q) : 5
3. At the command line, type psr and press ENTER. A list similar to the one below will be displayed.
> psr
Prog Name Queue Name Grp Name ID RqDone Load Done Current Service
--------- ---------- -------- -- ------ --------- ---------------
BBL 54352 dalsun99 0 16 800 ( IDLE )
PSAPPSRV APPQ APPSRV 1 352 17600 ( IDLE )
PSAPPSRV APPQ APPSRV 2 319 15950 ( IDLE )
PSAPPSRV APPQ APPSRV 3 410 20500 ( IDLE )
WSL 00001.00020 BASE 20 0 0 ( IDLE )
PSSUBDSP 00098.00300 PUBSUB 300 0 0 ( IDLE )
PSSUBHND SUBHQ_dflt PUBSUB 301 0 0 ( IDLE )
PSQCKSRV QCKQ APPSRV 50 525 26250 ( IDLE )
PSPUBDSP 00098.00200 PUBSUB 200 0 0 ( IDLE )
JSL 00095.00200 JSLGRP 200 0 0 ( IDLE )
PSPUBHND PUBHQ_dflt PUBSUB 201 0 0 ( IDLE )
PSQRYSRV QRYQ APPSRV 70 15 750 ( IDLE )
PSBRKDSP 00098.00100 PUBSUB 100 0 0 ( IDLE )
PSSAMSRV SAMQ APPSRV 100 1 50 ( IDLE )
PSBRKHND BRKHQ_dflt PUBSUB 101 0 0 ( IDLE )
PSSAMSRV SAMQ APPSRV 101 0 0 ( IDLE )
JREPSVR 00094.00250 JREPGRP 250 18 900 ( IDLE )
4. Look under the Grp Name column to determine the group name for the processes to be shut down. For this example, the PUBSUB group (6 processes will be shut down). Enter the command to shutdown the group:
> shutdown -g PUBSUB
Messages will be displayed showing the progress.
Shutting down server processes ...
Server Id = 301 Group Id = PUBSUB Machine = dalsun99: shutdown succeeded
Server Id = 300 Group Id = PUBSUB Machine = dalsun99: shutdown succeeded
Server Id = 201 Group Id = PUBSUB Machine = dalsun99: shutdown succeeded
Server Id = 200 Group Id = PUBSUB Machine = dalsun99: shutdown succeeded
Server Id = 101 Group Id = PUBSUB Machine = dalsun99: shutdown succeeded
Server Id = 100 Group Id = PUBSUB Machine = dalsun99: shutdown succeeded
6 processes stopped.
At this point the command line will be available. Either restart the group (see instructions below) or enter quit at the prompt to return to the psadmin menu.
Booting a Group of Processes
1. Navigate to the PeopleSoft Domain Administration Menu and select option 5. This will enter the Tuxedo command line mode.
Determine what group will be started. This can be determined based on a group that was previously shut down or by looking in the psappsrv.ubx file. For this example, the PUBSUB group that was shut down in the previous example will be rebooted.
2. Enter the command to boot the group:
> boot –g PUBSUB
Messages will be displayed to show the activity of the boot process.
INFO: TUXEDO(r) System Release 6.5
INFO: Serial #: 101998665, Expiration NONE, Maxusers 1000000
INFO: Licensed to: PeopleSoft
Booting server processes ...
exec PSBRKDSP -s PSBRKDSP_dflt:Dispatch -- -C psappsrv.cfg -D DCCRKR -S PSBRKDSP_dflt :
process id=28435 ... Started.
exec PSBRKHND -p 1,600:1,1 -s PSBRKHND_dflt:BrkProcess -- -C psappsrv.cfg -D DCCRKR -S PSBRKHND_dflt :
process id=28442 ... Started.
exec PSPUBDSP -s PSPUBDSP_dflt:Dispatch -- -C psappsrv.cfg -D DCCRKR -S PSPUBDSP_dflt :
process id=28449 ... Started.
exec PSPUBHND -p 1,600:1,1 -s PSPUBHND_dflt:PubConProcess -- -C psappsrv.cfg -D DCCRKR -S PSPUBHND_dflt :
process id=28456 ... Started.
exec PSSUBDSP -s PSSUBDSP_dflt:Dispatch -- -C psappsrv.cfg -D DCCRKR -S PSSUBDSP_dflt :
process id=28463 ... Started.
exec PSSUBHND -p 1,600:1,1 -s PSSUBHND_dflt:SubConProcess -- -C psappsrv.cfg -D DCCRKR -S PSSUBHND_dflt :
process id=28470 ... Started.
6 processes started.
At the command prompt, type q to get back to the psadmin menu.
To Shutdown/Boot a Specific Process
Use the same procedures as above but use the –i flag and the ID column from the psr command to determine which process to shutdown/boot. In this example, the PSAPPSRV process with an ID of 3 will be shutdown.
> shutdown –i 3
In the event of an obstinate process, use the following command to force a shutdown. It states: Try to nicely shutdown the process with the ID of 3, but if it doesn’t go away after 10 seconds, kill the process.
> shutdown –i 3 –w10 -y
If there’s a need to manually boot a process, use the following command. For this example another PSAPPSRV process (ID of 4) is started and added to the pool of 3 that already exist. If necessary, check the psappsrv.ubx file to verify the ID used is in the range of Ids available for the group.
> boot –i 4
If current service continues to show ‘ICPANEL’ it means that it’s (psappsrv) stuck trying to display information. Start an additional psappsrv process, and try killing the processes stuck in ‘ICPANEL’.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- ncr kit operating system recovery installation file
- how to boot or shutdown specific peoplesoft application
- dual boot linux and windows 2000 windows xp with grub
- performing an attended installation of windows xp
- use vmware server console to login to your designated
- linux live shoot out
- project 0 linux dabbling academics wpi
Related searches
- how to reduce or eliminate student loans
- how to boot windows 10 without password
- how to convert specific gravity to den
- how to do or inequalities
- how to calculate the average specific heat
- how to calculate mass in specific heat
- how to access boot menu
- how to get to the boot menu
- how to dual boot windows 10
- how to dual boot windows and linux
- how to solve or inequalities
- how to say or in python