802.11ac Wave 2 Indoor/Outdoor Enterprise Wi-Fi Access Point

802.11ac Wave 2 Indoor/Outdoor Enterprise Wi-Fi Access Point

Model: UAP-FlexHD

? Package Contents ? Hardware Overview ? Installation ? Powering the UAP-FlexHD ? Software Installation ? Mobile App Installation ? Specifications ? Safety Notices ? Electrical Safety Information ? Limited Warranty ? Compliance ? Declaration of Conformity

Package Contents

UniFi AP FlexHD Base Mount

Outdoor Mount

Wall/Pole Plastic Ties

Mount

(Qty. 2)

PoE Adapter* (48V, 0.32A)

Power Cord

Security Screw

Screws Screw Anchors

(Qty. 3)

(Qty. 3)

* Included only in the single-pack of the UAP-FlexHD

Installation Requirements

? Phillips screwdriver ? Cat5/6 UTP cable for indoor installations ? Shielded Category 5 (or above) cabling should be used

for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE.

System Requirements

? UniFi Cloud Key or Dream Machine, or machine running Linux, Mac OS X, or Windows 7/8/10

? Java Runtime Environment 1.8 or above recommended ? Web Browser: Google Chrome (Other browsers may have

limited functionality.) ? UniFi Controller software v5.11.31 or newer (available at:

download/unifi)

Hardware Overview LED

1

LED Color

Status

White

Factory default, waiting to be integrated.

Flashing White Initializing.

Alternating White/Blue

Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place.

Indicates the device has been successfully

Blue

integrated into a network and is working

properly.

This is used to locate an AP.

Quickly Flashing Blue

When you click Locate in the UniFi Controller software, the AP will flash. It will also display the location of the AP on the map.

Steady Blue

Indicates the device is in an isolated state

with Occasional (all WLANs are brought down until an

Flashing

uplink is found).

Ports

2 3

Ethernet Gigabit Ethernet port used to connect 802.3af PoE power and should be connected to the LAN and DHCP server. Reset The Reset button serves two functions for the UniFi AP: ? Restart Press and release the Reset button quickly. ? Restore to Factory Default Settings Press and hold the

Reset button for more than five seconds.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download