Rs507 scan setup for vocollect
Scan Sequence 1st2nd3rd4th5th6thBefore you configure the RS507, you’ll need to setup the security settings for the A700 device that will be paired to the scanner. To setup the A700 device do the following:?Login to VoiceConsole and select the “VoiceConsole”?buttonClick the “Device Management”?tabOn the left side of the screen, select “Devices”?(assuming it’s not on that page already)Click on the device serial number that you wish to configureSelect “Pair this device with a peripheral”?on the left side of the screen.For pairing type,?select “Bluetooth scanner”For connection mode, select “Device listens for peripheral connection”For security, select “Enabled”Enter 12345 for the pinThen click “pair with peripheral”?Now that VoiceConsole is configured for the A700 device we want to pair with, let’s configure the RS507.Cold boot the deviceRemove the battery from the RS507Hold the button on the side of the deviceWhile holding, Put the battery back in the deviceWhen the light on the device flashes green and then beeps, release the buttonScan this Factory default barcode for good measure?Scan this SPP barcode (stands for Security something something)Scan this barcode to enable the security?Scan this barcode to set up carriage return and line feedThen use the RS507PCTOOL to generate the pairing barcode for the device. [ATTACHED]?Note:? All I used this tool for was to create a barcode that can be clipped and printed.In my case, I scanned it from the PC monitor and this created the connection with the associated BT MAC address of the A710.? Also, ensure you are entering the BT MAC address and NOT? any other address that appears within the battery compartment of the A700 unit. ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.