Chapter 10 - Database Introduction



2.1 – Introduction to DatabasesThis chapter discusses the basic concepts needed to understand and use simple databases. While the spreadsheet’s power lies in its ability to analyze data and relate values by creating formulas that reference other cells, a database management system (DBMS) is designed to relate groups of information and to store, retrieve, and manipulate that information in an efficient manner. data, database, and dbmsdefining a database:Data is a numeric or alphanumeric group of symbols, such as 223197001. When we give meaning to data it becomes information. For example, 223197001 has no meaning unless we are told it is a social security number. A piece of information becomes even more meaningful when it is related to another piece of information: 223197001 is John Smith’s social security number. A database is a collection of related data stored in a well-defined structure. Databases exist in both computerized and non-computerized formats. Examples of databases include a categorized file cabinet, the telephone book, a list of alphabetized songs on your iPod, or a listing of all students and classes at a university. Databases are managed by software tools known as Database Management Systems (DBMS). Examples of DBMS’s are Microsoft Access, FoxPro, Oracle, and Sybase, among many others. Just as a word processor (e.g., Microsoft Word) is used to create and edit documents, a DBMS is used to create and manage databases. A relational DBMSEach DBMS is based on a database model that defines the way the information should be organized and accessed. The three most commonly used models are the hierarchical, network, and relational. Of these the most flexible is the relational model, which is what we will be discussing in this chapter. 3228975829310Related field on tables00Related field on tables410527512674602857591503510191752000885Figure SEQ Figure \* ARABIC 100Figure SEQ Figure \* ARABIC 1The relational model represents data and relationships using a collection of tables, as seen in Figure 1. Each table is organized into categories of data known as fields. The table on the left side of Figure 1 stores information regarding patients, including patient identification number, name, address, and the doctor number of the physician treating this patient. A relational database many contain more than one table and these tables may themselves be related to each other. The example in Figure 1 contains a second table with information about each doctor. Notice that each doctor is identified by a unique DoctorID which can be related to the DoctorID on the patient table in each patient record. In addition to tables, most modern day DBMS’s include other objects which allow the user store, retrieve, and manipulate data. In MS Access these objects include the following: Queries – “questions” that retrieve information from a database. Queries are structures to sort, filter, and select specific information.Forms – structures for displaying data that allow a user to view information from and input information in one or more objects (tables, queries, etc.).Reports – structures for written output of data which again allow one to combine information from one or more objects and view both details and summaries. Macros & Program Modules – program code to perform specific actions.a relational database example – supply chain management7308851798955Tables:00Tables:685800883920The diagram in Figure 2 represents part of an Order Entry and Inventory control system. The system includes forms, queries, and reports for data entry and retrieval. The tables store information regarding product inventory, vendors, customers and orders. Figure SEQ Figure \* ARABIC 2The flow of information in the database for a typical order that might be phoned in by a customer may be as follows: The order entry clerk would enter the order into an Order Transaction form. Once the order is input, a predefined program module would take this data and enter it into the appropriate tables: e.g., Order Details table, Customer Accounts table, etc.A Daily Pick List report will be printed for the fork lift operator in the closest warehouse and customer invoice report printed to be included with the shipment.The inventory table will be updated at this warehouse with this reduction in quantity; if insufficient inventory remains, an order report would automatically be emailed to the supplier to order more inventory.As you can see, a company’s supply chain system using DBMS software is an extremely valuable tool in modern day business. This course will discuss some simple database concepts as well as how to design and query a simple database. The mechanics of setting up tables, reports, and forms is covered in the course textbook. Setting up program modules/macros is beyond the scope of this course.Access Tables: Records and fieldsDefining fields and records of a table374654149090Figure SEQ Figure \* ARABIC 300Figure SEQ Figure \* ARABIC 3The basic component of an Access database is the table. All other objects are based on the structure and data within the tables. Each table is organized into a specified set of ordered categories, or fields. Figure 3 is part of a table named Customers. The fields in the Customer table include SSN, First Name, Last Name, Address, City, State, and Postal Code. Related information is input into the table as records. Each record contains related values for each table field. For example, the first record in this table contains Jane Doe’s SSN, her last name, her first name, her address, her city, her state, and her postal code in that order. Jane Doe’s record does not contain John Black’s SSN or Mary Park’s postal code. In addition, the third piece of data in any record in this table will always be the Last Name as the order of values in each record is the same as the order of the fields in the table.A table is frequently pictured as a collection of records in which fields are columns and records are rows. A Data Base Management Systems is not limited to this physical view of a table. However, for purposes of abstracting the actual processes DBMS systems perform, this table view is helpful. In Access this view can be invoked from the Fields ribbon. 6667501066800005505450121094500-7143754004945Figure SEQ Figure \* ARABIC 400Figure SEQ Figure \* ARABIC 452520854407535View buttons00View buttons-3625853353435Record Selection Buttons00Record Selection Buttons952502162175005238751457325005748655704850Fields Ribbon020000Fields Ribbon-3175002325370Navigation Pane – lists database objects020000Navigation Pane – lists database objects-2635251238885Views button – switch from datasheet to design00Views button – switch from datasheet to designIn Access 2010, the Fields ribbon allows the user to not only view and input data, but to add new fields and to specify field properties. Figure 4 illustrates the Access window with the Accounts table open to the Fields ribbon visible. An excellent overview of the Access interface is given in the course textbook at the beginning of chapter 1.52292253457575009334502785745004762500255270000Field properties392430024638000Fields are defined by field properties. The diagram in Figure 5 shows the design view of an Access table where field properties may be specified. The most common field properties are: Data type: The type of information stored. e.g., Number, Text, Currency, Yes/No (Boolean), Memo, etc3676650993140Figure SEQ Figure \* ARABIC 500Figure SEQ Figure \* ARABIC 5Field size: The number of characters for text or the precision of numbers. e.g., numbers can be integer, long integer, single precision, double precision, decimal, byte, etc. Format: For numbers, the format specifies display properties such as currency style, scientific notation, etc.Input Mask: Predefined formats for displaying the field, such as social security numbers with dashes displayed but not stored, etc.Caption: The title that is displayed instead of the field name.Default Value: A value that will be used if this field is left blank when a record is entered.Validation Rule: A list of possible values or range of acceptable values for this field.Required: If selected, when entering or modifying a record this field must be entered or the computer display an error message. It is advantageous to specify field properties both to make the table easier to use and more efficient. For example, each time a new record is created, Access allocates memory (bytes) based on the field size specified. That is, an amount of memory the size of the field is set aside, whether it is needed or not. If a specific text field only requires three characters and the size specified as 50, each record will waste the space of 47 characters. If each character takes two bytes of memory, 94 bytes of storage space would be wasted per record. A large database with 100,000 records would be wasting 9.4 million bytes!What field type should you use?A social security number consists of 9 digits. What field type would be best suited to store this data? Using a number gives the user the ability to perform arithmetic calculations, while text does not. Will it ever be necessary to perform arithmetic calculations on these values? Probably not. So a number type is not needed, but can it be used? Consider the social security number 003278343. If this value is typed into a Number field, what value will be stored? Try it and you’ll find that the value 3278343 is displayed – the leading zeros are discarded. Does that matter? In the case of social security numbers, this matters greatly. The user will not want to have to “add” the zeros to print out a person’s data in a report. If the value was stored as text, the zeros would remain part of the data stored. Thus the best field choice for a social security number is a text field. This same logic applies to zip codes and even phone numbers. Uniquely identifying table recordsImagine a large bank with over 100,000 accounts; can a person’s last name alone be used to identify the contents of their bank account? Is it possible that two customers have the same last name, or even that one customer has multiple accounts? If such a customer made a deposit to their account how do we know which account to use? Obviously this is a very realistic situation and must be taken into consideration when designing a database. To solve this problem, database designers include a field in tables that uniquely identifies each record. The Customers table presented in Figure 3 contains a unique social security number, SSN. Since no one person has the same social security number, this can be used to uniquely identify a person/record in the table. A field that uniquely identifies a record is referred to as a primary key field. The primary key cannot be blank nor can it contain any duplicate values (two records have the same value for the primary key field).Will SSN always be a good primary key field to use? Not necessarily, it will depend on the situation. Would an SSN uniquely identify a bank account? If a customer can have multiple accounts (e.g., for example one for savings and one for checking) then the SSN is not a unique identifier. To solve this problem the bank may use a unique account number, as seen in Figure 4. A combination of fields can also be used to uniquely identify a record. Consider a table of transactions a combination of account number and transaction time might be used to uniquely identify a record, though normally these types of tables would be setup with a separate transaction number. You’ve probably used these types of numbers in other applications, such as when you look up an airline reservation or track a FedEx package.A primary key field is not always necessary; not every table will have a single-field primary key or any primary key at all. However, every relationship between tables must have some field or combination of fields that uniquely identify records in one of the tables. Otherwise, for example, it could not be established exactly which transaction will go to which account. When using a combination of fields as a key, additional fields are known as secondary, tertiary, etc. fields. A possible combination of fields to uniquely identify a bank customer could be the first name, birth date, and phone number to include with last name. In this course we will use single primary key fields to uniquely identify records.In documentation a table is normally listed by its name followed by an ordered list of fields in parenthesis. The primary key is underlined. The Accounts table would be written in this notation as follows: Accounts(acct#, SSN, lname, fname, address, City, State, Postal Code)This description of the Accounts table is also known as a relational schema. relating tables in a relational dbmsTables are structured into records of related data organized into ordered fields. Records are uniquely identified by a primary key field. By uniquely defining a field such as an account number we can find data corresponding to that account number that may reside in other tables, such as transactions made on that account. In this section we will explore relating data between tables.Definition: Foreign KeysDatabases can contain multiple tables where a relationship between tables is established by correspondence between fields. The field used to relate two tables is referred to as the foreign key. Consider the two tables in Figure 6. The first table lists an account number, the name of the person listed on the account, and their address. The second table lists bank deposits identified by the depositor’s name. Can each deposit be related to an account using the Name as the foreign key between the two tables? Is Smith’s $100 deposit for the Smith on Main Street or the Smith on Cherry Lane? Clearly using a field that has duplicate values on both tables does not work very well. Acct#NameAddress33020019050?00?Name$Deposit1Smith123 Main St.-6032514287500Smith252Jones45 Elm StSmith1003Smith27 Cherry LaneJones25Figure SEQ Figure \* ARABIC 6Figure 7 contains a modified version of the second table that includes the account number instead of name. Can each deposit be uniquely matched to a single account using the account number as the foreign key? If the account number is the primary key of the first table, the transactions on the second table can related to a specific account. Thus, a foreign key must be a primary key on at least one of the tables for a relationship to be valid.Acct#NameAddressAcct#$Deposit1Smith123 Main St.101600-3810Acct#00Acct#-60325142875001252Jones45 Elm St31003Smith27 Cherry Lane225Figure SEQ Figure \* ARABIC 7This type of relationship where many values from one table (many deposits) can match to a single value on the related table (one acct#) is referred to as a Many to One relationship (or a One to Many relationship). An equally valid relationship would be a One to One relationship where each record of one table corresponds to at most one record in the second table. A One to One relationship occurs when each foreign key is the primary key on both tables.requirements of a valid foreign key It is not required that the field names on each table match. Conversely, two fields that have the same name do not imply there is a foreign key relationship.The following rules define what is required for a relationship between two tables to be valid:The foreign key must be a primary key on at least one of the tables.The field types for the foreign key field must be the same on both tables.The information being related must be the same.The first requirement has already been discussed. What about the second requirement, what does it mean the field types must be the same? Consider the foreign key in the previous example. What field type is the acct# field? The designer had a choice of using Number or Text. Either would have worked, though one may have been more efficient that the other. What matters is consistency between the two tables. If the acct# field is an Integer number on the first table and Text on the second table, Access will not be able to match the foreign key records. Why should it make a difference which data type is specified? After all, you can’t see the type of the field when looking at the information in the datasheet view. However, remember the data is being stored in memory of a computer as a series of high/low level electrical charges that we express as zeros and ones. The text representation for the digit 1 may be a series of 32 zeros and ones while the Integer representation for the number 1 may be a series of 16 zeros and ones. These two values are NOT EQUAL and thus computer will not recognize the two values as matching.What about the third requirement for a valid foreign key, what does “information being related must be the same” mean? Consider two tables, where each has account numbers. Table 1 contains the account numbers at First City Bank and Table 2 contains the bank numbers at Union Trust bank. While the fields may have the same name and type, there is no relationship between account 1234 at First City Bank and account 1234 at Union Trust bank. Relating the records between these two tables based on account number would be meaningless.Many to one to Many relationships In the following example another table has been added to the database to keep track of withdrawals. The schema of the table is Withdrawals(Acct#, Amount). Can the Withdrawals table be related to the Deposits table from the previous example?DepositsWithdrawalsAcct#Amount34925019050?00?Acct#Amount256887$50.-6032512382500256777$25256887$75654887$100654887$32256887$25Figure SEQ Figure \* ARABIC 8The fields Acct# (table Deposits) and Acct# (table Withdrawals) both represent a customer’s account and we can assume they both are specified as the same data type. Yet in neither case are these fields primary. There may be many instances of an account number on the deposits table (e.g., 256887) and many instances of that same account number of the withdrawals table. However, a deposit does not correspond to a withdrawal (and vice versa). Thus, the account number would not be a valid foreign key. This type of relationship is referred to as a Many to Many relationship.Can we relate the tables using the Amount fields? While the Amounts fields have the same name, they represent different information. On the deposits table Amount is the money into an account. On the withdrawal table Amount is the money out of an account; it does not make sense to relate these fields. In addition, it possible that two transactions contain the same value in the amount field, so neither of these fields is primary.But certainly it makes sense that somehow the deposits into an account are related to the withdrawals from that account. To solve this dilemma databases are designed with intermediate tables, in this case the Accounts table. In the Accounts table the account number is the primary key and can be related to both the Deposits table and the Withdrawals table, as seen in Figure 9. This changes the relationships so that there are now two Many to One relationships. The relationship between three such is referred to as a Many to One to Many relationship.857250970280Another possible database design would be to combine the Deposits and Withdrawal tables into one Transactions table, since the fields are essentially the same, account number and a monetary value. In the latter type of design, deposits would need to be entered as positive values and withdrawals as negative values. 7905759036051837690855980Figure SEQ Figure \* ARABIC 900Figure SEQ Figure \* ARABIC 9Defining relationships in an access database26657302587625Figure SEQ Figure \* ARABIC 1000Figure SEQ Figure \* ARABIC 1033623251388110002952751569085001778002724785Figure SEQ Figure \* ARABIC 1100Figure SEQ Figure \* ARABIC 11Just as our DBMS software will allow us to define a table and enter records, it also allows us to define relationships between tables. The Relationships tool can be launched from the Relationship button on the Database Tools ribbon in the Show/Hide group, as shown in Figure 10. Figure 11 shows the relationships view that displays the relationship between the Accounts and a Transactions tables. 39084252133600Figure SEQ Figure \* ARABIC 1200Figure SEQ Figure \* ARABIC 1238442903810000When the relationships view is first launched in a new database it will be blank. Each table must be individually added from the Show Table box, as seen in Figure 12. To open the Show Table dialog box, right-click anywhere in the relationships window. Once the box is open, click on the Tables Tab (or Query tab for a query) and select the name of the table to be added and then click then Add button (or double click on the table name). Repeat the process to add additional tables. Figure 13 illustrates the Relationship window with the Accounts and Transactions tables added but not yet related. To relate tables follow these three steps:359092530162500Move the mouse to the foreign key field listed on one of the tables. While holding down the left mouse button, drag the cursor to the corresponding field on the second table. The cursor will change into a circle with a line through it during this process. When you reach the corresponding field, release the mouse button.3676650276225Figure SEQ Figure \* ARABIC 1300Figure SEQ Figure \* ARABIC 13A line should appear that connects the two fields, similar to the picture originally shown in Figure 11. Once all relationships have been defined, close the window and select the Yes button to save. Repeat this process to make any additions/changes to the relationships window. Relationships can be deleted by clicking on the relationship line and then pressing the Delete key. using table to manipulate dataOne of the main reasons for using DBMS software is the ability to quickly and easily locate specific data or sets of data. Within an Access table it is possible to quickly and easily locate data using the Filter and Sort tools. To understand how a database finds records, we will also briefly explore the concept of search routines and Indexing.applying Data FiltersThe filter tool can be used in the datasheet view to display selected records of a table. A filter allows us to specify criteria in a field or fields and show only those records that meet the criteria. Using the filter tool we can list only those people who live in Columbus, those people whose last name is Jones, or even only people whose last name is Jones and live in Columbus. The mechanics of setting up filters from the datasheet view of a table can be found in any of the step-by-step instructions in the course text. The Filter tools can be found on the Sort and Filter group of the Home tab (Figure 14). They include:4060190828675Figure SEQ Figure \* ARABIC 1400Figure SEQ Figure \* ARABIC 143876675000The Filter button allows the user to sort or choose one listed item as a filter criterion. This list will vary depending on which field of the database is currently selected. To select a field, simply place the cursor on any record in the field to be filteredThe Selection button applies the filter using the current selection as the criteria. If the highlighted “cell” is on record 3 in the account field and that value is 123, then 123 will be the selection criteria. After clicking on the Selection button, options to select records based on this filter will appear including: equals, does not equal, greater than, etc.The Advanced button gives the user several options for filtering data, including Filter by Form which enables criteria to be defined across multiple fields. To remove the filter, click the Toggle Filter button. This ability to find records that meet a specific set of criteria will be greatly extended in the next chapter using a database query.Sorting Tables 559117564262000From the Datasheet Table View in Access, tables can also be sorted. Using the sort tool, select a field and a sort type (ascending or descending). The records will be temporarily rearranged based on this order. Sorts can be performed by clicking on the field to be sorted and then selecting either the ascending or descending sort buttons in the Sort & Filter group of the Home tab. The buttons for sort-ascending and sort-descending look like this:If the table is not saved using the Save button, the table will revert back to the original record order when reopened. Sorting is an efficient tool for helping to retrieve specific records. More advanced sorts using multiple sort keys can be done using a query. Indexing Tables and Search SchemesIndexing tablesThere are also methods by which DBMS systems can index your files to create a cross reference to the table records based on a specific sorting method. Since data is usually stored on magnetic disks in a linear fashion, similar to music on a tape, file indexing combined with search schemes make it more efficient for the computer to retrieve records, especially in databases with millions of records. Several indices can be setup for the same table, allowing for efficient searching for a variety of fields. For example, the bank can search by account number or by last name, depending on the information the customer has provided. These searches may always be done whether or not a table is indexed; searches over a large number of records are more efficient when using indices.A linear search routineAs previously mentioned, one of the reasons to sort tables is to allow for more efficient data retrieval. For example, imagine a dictionary that had words listed randomly. In order to find a specific word one needs to systematically go through each word, one by one, until the desired word is found. This is known as a linear search. On average, a linear search will have to look at the number of items in a table divided by two in order to find a specific piece data: it might be the first word in this randomly organized dictionary, but then again it might be the last.Why is efficient data handling so important? First let us understand how data is stored and retrieved by a DBMS like MS Access. Recall that when working with an Excel spreadsheet, the entire file is loaded from the disk drive onto the computer’s RAM (random access memory). So working with spreadsheet data is usually extremely fast, but the size of files are limited by the RAM of the computer. In fact, one notices a significant slow down of operation speed as the workbook file increases in size. In contrast, most relational databases do not load all of the tables, queries, reports, etc. directly into RAM. They load only the table of contents of the objects. To process information from one or more objects, just those objects are loaded into RAM. Thus, a DBMS can handle much larger quantities of data. In fact, many large databases systems have millions of records.When running a DBMS, the computer is not just processing information but continually retrieving and writing data to and from secondary memory (usually a magnetic hard drive). While a computer’s RAM can process information at very fast speeds, searching for specific information on a disk drive and retrieving and/or writing to the drive is a much more time consuming process. If a file is stored in random order, as with the un-alphabetized dictionary, it will require the computer to look at the disk many more times to find the information that we want than if the file was sorted. Consequently, computer scientists are interested in how to search for information more efficiently.The Binary SearchThere are many different search schemes that can be used with indexed files to speed up retrieval of information. Most of us are all familiar with the alphabetical sort routine that divides textual information into 26 groups based on the first letter of each item, and then further subdivides each group by the second letter, etc. The search routine to retrieve information from an alphabetical list, such as a dictionary, is to identify the first letter of the text and match it to the correct group and then continue doing this with the second letter and so on until a match has been identified.A similarly efficient scheme which can be used with numerical data is known as a binary search routine. A binary search routine is much more efficient than a linear search in finding information. In Figure 15 records have been sorted by the indexed field, ID#, in ascending order. To find the record for id#606147775 using a binary search routine the computer would do the following:38023802592705Figure SEQ Figure \* ARABIC 1500Figure SEQ Figure \* ARABIC 15First go to the middle record (not the average value!) of the list and check to see if the value (id#) equals the value of the middle record. If this is true, the record has been found. If not, continue to step 2.If the value is greater than the value of this middle record, ignore all records from the beginning of the list until this midpoint. The remaining list will contain only records from the midpoint until the end of the list. Set a new midpoint for this new list and begin again at step 1.If the value is less than the middle record, ignore all records from the midpoint to the end of the list. The new list will contain only records from the beginning of the list until the midpoint. Set a new midpoint for this new list and begin again at step 1. This process will continue until a match is found or all records have been searched (in which case the value does not appear in the list).Applying this algorithm to this specific example:Since 606147775 is greater than 328824082, consider only those records starting with 328824082 until the end of the table. The midpoint of this new list is 536370683. Is 606147775 greater than 536370683? Yes. So now consider only those records from 536370683 until the end of the table. The midpoint of this new list from 536370683 to 988544806 is 684995818. Is 606147775 greater than 684995818? No. So our new list will be from 536370683 to 684995818.The midpoint of this list is 606147775. Since this midpoint now matches our search value the desired record has been found. This search only looked at three different records in the table. A linear search on average would have looked at 19/2 or 10.5 records. This is a significant improvement. To illustrate the significant difference between linear and binary search routines, consider a situation where instead of 19 records, the list had a million records. If the list isn’t sorted by the value we’re searching for, in the worst case we would have to look at all one million records. If the list is sorted and we use a binary search, we would only have to look at thirty one. If the list had 10 million records and we could use a binary search, the worst case is still only looking at thirty five records.A binary search is only one of many different methods computer scientist use to improve the efficiency of retrieving data. There are computer science courses devoted solely to this topic. This discussion is only meant to provide you an appreciation of the processes involved and an insight into the importance and complexity of the topic.Designing Your Own DatabaseThe design of a complex database management system can take weeks, months or even years to complete, involving thousands of man-hours of effort by a team of computer scientists and management. You may someday be part of one of these teams, or you may just be trying to create a small database to keep track of a guest list for a large party. Regardless of the size and complexity of your database, there are several things one must consider before creating a database. As with a spreadsheet, the critical step in designing an effective database is to plan it. Think about the following:What data objects are present? Customers and account transactions are each table objects in our sample database.How is the data related? In our sample database, we have related these objects by a foreign key field (SSN).What information will be generated from the data? Will we need to design queries and/or reports to list of all accounts for owners who live in Columbus, or summarize transactions by account?When setting up even the simplest of tables there are several factors to consider:Tables should be divided into inseparable fields. For example, if an address field contains the entire address (street, city, state and zip code) it may not be possible to sort our list by state, or to display only those records within a specific zip code. In this case we may want to define each of the address elements as separate fields.Appropriate Field types should be selected with respect to the type of data being stored.Appropriate field sizes should be used to minimize data storage. Field properties should be defined to aid in data input (validity, defaults, etc).Each fact should change in only one place. If a fact appears in more than one record of a table, it should probably be defined in another table. Calculations shouldn’t be part of the table. In subsequent chapter we will discuss how to perform calculations using the Access Query tool.Appropriate primary keys should be selected that enable relationship structures between tables of information. Obviously this list can be greatly expanded. In fact there are both undergraduate and graduate courses devoted to learning how to design, build and maintain databases. But the list should give you some idea as to the types of things that need to be considered.Exercise 2.1-1 - Database Concepts Review What is the difference between a Database and a Database Management System?What is the difference between Data and Information?Find the letter of the item which best matches the description given:Binary SearchDatasheet ViewDesign ViewFieldField PropertyFilter by FormFilter by SelectionFormIndexQueryRecordReportSortTable___A tool that can be used in Datasheet View to display only records with a matching field to the record/field currently selected.___Each table is organized into categories known as this.___ On the table below one row is referred to as this.___ Location in Access where you define the table structure.___ View where the records of a table appear as seen below.___Structures for written output of data.___Use to organize a specific field alphabetically in the Datasheet View.___A method of finding information in a sorted list comparing a midpoint value to the value being sought.ID Number#Class893046751230467589334412Which field might be a good primary key (if any) in each of the following tables?Names:Classes:NameIDAddressBob1238 Main StDave89322 High St.Mindy308 Main St.Is there a foreign key between these two tables? List the three necessary conditions for a key to be a valid foreign key.What field type is most appropriate for the Class field and why?Suggest a database structure to keep track of student grades and the people who assign grades, assuming there multiple exams, labs, etc. and multiple lab consultants, TAs, etc. ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download