O Level & IGCSE Computer Science
O Level & IGCSE
Computer Science
IQ Data Representation R Workbook
AHBA9Z20T4A594 Compiled by SH0300Shahbaz Tariq
Contents
Syllabus content & assessment at a glance ............................................................................................3 1.1 Data representation..................................................................................................................................5
Denary (Decimal) Number System:- .....................................................................................................5 1.1.1 Binary Number System:- ...............................................................................................................6 1.1.2 Hexadecimal Number System:- ...................................................................................................9
Examination Questions .................................................................................................................... 16
IQ 1.1.3 Data storage................................................................................................................................. 23 Examination Questions: ................................................................................................................... 26 R Error Detection and Correction ....................................................................................................... 28 Examination Questions: ................................................................................................................... 29
SH0A3H0B0 A9Z20T4A594 Marking Schemes................................................................................................................................. 51
Page 2
Syllabus content & assessment at a glance
Sections
Topics
Section 1
Theory of Computer Science
1.1 Data representation
1.1.1 Binary systems
BAZ 0T4A5R9I4Q Section 2
1.1.2 Hexadecimal 1.1.3 Data storage 1.2 Communication and Internet technologies 1.2.1 Data transmission 1.2.2 Security aspects 1.2.3 Internet principles of operation 1.3 Hardware and software 1.3.1 Logic gates 1.3.2Computer architecture and the fetch-execute cycle 1.3.3 Input devices 1.3.4 Output devices 1.3.5 Memory, storage devices and media 1.3.6 Operating systems 1.3.7High- and low-level languages and their translators 1.4 Security 1.5 Ethics Practical Problem-solving and Programming 2.1 Algorithm design and problem-solving 2.1.1 Problemsolving and design 2.1.2 Pseudocode and flowcharts 2.2 Programming 2.2.1 Programming concepts 2.2.2 Data structures; arrays 2.3 Databases
AH 92 Paper 1 Theory
1 hour 45 minutes
This written paper contains short-answer and structured questions. All
questions are compulsory.
H 0 No calculators are permitted in this paper.
75 marks
Externally assessed.
Paper 2 Problem-solving and Programming 1 hour 45 minutes
S 0 This written paper contains short-answer and structured questions. All
questions are compulsory. 20 of the marks for this paper are from questions
3 set on the pre-release material. 1
No calculators are permitted in this paper.
50 marks
0Externally assessed.
Weighting 60%
40%
Page 3
Paper 1 SH0A3H0B0A9Z20T4A5R9I4Q Theory of Computer Science
Page 4
1.1 Data representation
Candidates should be able to: 1.1.1 Binary systems ? recognise the use of binary numbers in computer systems ? convert denary numbers into binary and binary numbers into denary ? show understanding of the concept of a byte and how the byte is used to measure memory size ? use binary in computer registers for a given application (such as in robotics, digital
Q instruments and counting systems)
1.1.2 Hexadecimal
I ? represent integers as hexadecimal numbers
? show understanding of the reasons for choosing hexadecimal to represent numbers ? convert positive hexadecimal integers to and from denary
R ? convert positive hexadecimal integers to and from binary
? represent numbers stored in registers and main memory as hexadecimal ? identify current uses of hexadecimal numbers in computing, such as defining
A colours in Hypertext Markup Language (HTML), Media Access Control (MAC)
addresses, assembly languages and machine code, debugging 1.1.3 Data storage
T 4 ? show understanding that sound (music), pictures, video, text and numbers are
stored in different formats
9 ? identify and describe methods of error detection and correction, such as parity
checks, check digits, checksums and Automatic Repeat reQuests (ARQ)
Z ? show understanding of the concept of Musical Instrument Digital Interface (MIDI) 5 files, jpeg files, MP3 and MP4 files
? show understanding of the principles of data compression (lossless and lossy
A compression algorithms) applied to music/video, photos and text files B 04 "The system of counting and calculating is called number system."
Number system is based on some characters called digits. The number of digits is
H 2 known as base or radix of the number system. For example binary number system uses
two characters 0 and 1 and its base is 2.
A 9 Computer uses following four numbers:
i) Denary (Decimal) number system ii) Binary number system
H 0 iii) Hexadecimal number system
Denary (Decimal) Number System:-
S 0 "The number system which is based on 10 characters from 0 to 9 is called denary (decimal) system." 3It is the most common number system. The digits of decimal system are 0, 1, 2, 3, 4, 5, 6, 7, 8, and 9. The value of each digit in a figure depends upon its weight. The 0weights are based on power of 10.
Page 5
The weights of digits according to their positions are given below:
Position
5th
4th
Weight(Decimal 104=10000 103=1000
3rd 102=100
2nd 101=10
1st 100=1
Notation)
For example 76854 can be expressed as: 76854 = 7 x 104 + 6 x 103 + 8 x 102 + 5 x 101 + 4 x 100
= 7 x 10000 + 6 x 1000 + 8 x 100 + 5 x 10 + 4 x 1
Q = 70000 + 6000 + 800 + 50 + 4 I = 76854
1.1.1 Binary Number System:-
R "The number system which is based on 2 characters 0 and 1 is called binary
system."
Computer circuitry represents data in a pattern of ON and OFF states of electric
A current. The state ON is represented by `1' and OFF is represented by `0'. Binary system
is used for internal working of electronic computers.
T 4 The value of each digit in a figure depends upon its weight. The weights are based on
power of 2.
Binary numbers are fundamental to the way that all modern computers work. They are
9 used to represent any data stored within a computer system. Z 5 Using only 0 and 1 makes it easier to design the electronic circuits that the computers
will use. This is because, if the computer wants to check a value in any part of the circuit,
A 4 it only needs to detect whether or not there is any electricity. If there is electricity, the
value is 1, if there is no electricity, the value is 0.
B 0 The weights of digits according to their positions are given below:
With the help of above chart we can derive a sequence of number, that sequence is
H 2 known as Binary Notation. The binary notation is a sequence of numbers are based on
power of two and arrange from right to left, as given below:
A 9 Weight
24=16
23=8
22=4
21=2
20=1
H 0 Position
211 210 29
28
27 26 25 24 23 22 21
20
Binary
2048 1024 512 256 128 64 32 16 8 4 2 1
S 0 Notation
03 Binary notation is ....512 256 128 64 32 16 8 4 2 1
Computer Science with Shahbaz Tariq
Page 6
For example 1001112 can be expressed as: 1001112= 1 x 25 + 0 x 24 + 0 x 23 + 1 x 22 + 1 x 21 + 1 x 20
= 1 x 32 + 0 x 16 + 0 x 8 + 1 x 4 + 1 x 2 + 1 x 1
= 32 + 0 + 0 + 4 + 2 + 1
= 3910
If a switch is on, it can represent the number 1. If it is off, it represents 0. These states can also be interpreted as TRUE or FALSE. If you have enough switches, you can store
Q all sorts of data. You could ask a question such as `will you give me some money?' and I you can get an answer in binary digits:
0 = NO
R 1 = YES
This is making use of just 1 bit of data. Add another bit and you can say more:
A 00 = NO
10 = MAYBE
01 = NEXT WEEK
11 = YES
T 4 The more binary digits you have, the more information you can store and process. Most 9 computers store bits of data in memory in groups of eight. Eight bits stored at one
location is called a byte. Sometimes it is useful to work on just half a byte. Half a byte is
Z called a nibble.
A 5 1
1
1
1
1
1
1
1
4 bit
bit
bit
bit
bit
bit
bit
bit
Nibble
Nibble
B 0 Byte
H 2 A bit (binary digit) is the basic unit of information in computing.
A nibble consists of 4 bits. A nibble corresponds to a single hexadecimal digit.
A 9 A byte consists of eight bits. A byte was the number of bits used to encode a single
character of text in a computer and for this reason it is the basic addressable element in
H 0 many computer architectures.
S 0 A kilobyte (kB) is 1024 bytes. The reasoning behind it being 1024 and not 1000 is that we use powers of 2, not 10, to represent binary numbers. (NOTE: the small k on kB). 1kB of memory could store roughly one full A4 page of text.
03 A megabyte (MB) is 1024 kB or 220. 1 MB is about the amount of data that is needed to
Computer Science with Shahbaz Tariq
Page 7
store a full screen image, 1 minute of MP3 music, 6 seconds of uncompressed CD audio or a typical book.
A gigabyte (GB) is 1024 megabytes or 230 bytes. 1 GB is enough data for one hour of
standard video, 7 minutes of high definition video or 114 minutes of uncompressed CD
quality audio. A dual layered Blu-ray disc can hold about 25-100GB.
A terabyte (TB) is 1024 gigabytes or 240 bytes. This is a difficult amount to
Q comprehend, but Yahoo!? groups have about 40 terabytes of stored data. The first 1TB I hard drive was produced in 2007. claims approximately 600 TB of
genealogical data with the inclusion of US Census data from 1790 to 1930. Released in 2009, the 3D animated film Monsters vs. Aliens used 100 TB of storage during
R development. The first 20 years' worth of observations by the Hubble Space Telescope
has amassed more than 45 terabytes of data
A Why does data need to be converted into a binary format to be
processed by a computer?
T 4 Binary is a number base that only uses 1's and 0's. The computer
understands binary as voltage on (1) or voltage off (0) signals. If the decimal
9 system were used, there would need to be 10 different voltages, in which
case there would be more room for error when testing for a voltage, and
Z therefore a greater possibility of corruption of data 5 Define the terms bit, nibble, byte, kilobyte, megabyte, gigabyte,
terabyte.
BA 04 4 bits = 1 nibble
H 2 1024 bytes = 210 bytes
1024 K B =
220 bytes
1024 M B =
230 bytes
A 9 1024 T B =
240 bytes
SH0300 1024PB =
250 bytes
8 bits = 1 byte = 1 Kilo Byte = 1 Mega Byte = 1 Giga Byte = 1 Tera Byte = 1 Peta Byte
Computer Science with Shahbaz Tariq
Page 8
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- introduction to computer science introduction
- 0478 y15 sy a level
- recommended textbooks 2018 igcse
- cambridge igcse computer studies
- note all these snapshots are taken from cambridge igcse
- korean international school secondary textbook list 2019 2020
- gcse computer science textbook sample
- computer science and information and communication
- textbook list 2019 2020 year 7
- o level igcse computer science
Related searches
- igcse computer science workbooks pdf
- igcse computer science workbook
- igcse computer science workbook answer
- igcse computer science coursebook pdf
- igcse computer science revision notes
- igcse computer science revision
- igcse computer science book
- igcse computer science revision guide
- cambridge igcse computer science pdf
- igcse computer science syllabus
- igcse computer science textbook
- cambridge igcse computer science textbook