Centimetres and Inches: What’s the Relationship
Unit 5 Geometry MAP 4C
Foundations for College Mathematics
|BIG PICTURE |
| |
|Students will: |
|Understand the relationships between imperial and metric units |
|Consolidate understanding of perimeter, area, surface area, and volume through real-life problems |
|Explore optimization of two-dimensional and three-dimensional figures |
|Day |Lesson Title |Math Learning Goals |Expectations |
|1 |Exploring Relationships |Explore relationships that exist between inches and centimeters |GT1.1 |
| |between Metric and |(measuring tools: string, both types of rulers, or tapes) | |
| |Imperial |Reading ruler, measuring tape (fraction) | |
| | |Create a scatter plot from the student’s data | |
| |Lesson Included *New |Perform a linear regression and get the equation | |
| |Jan/08* |Connect to the actual conversion (inches centimetres) | |
|2 | |Trundle wheel activity for perimeter |GT1.1 |
| | |Converting mixed imperial measurements metric | |
| | |Example convert 5 1/8” to cm | |
|3 | |Finding the area of rectangles, triangles, and circles, and of related composite |GT1.2 |
| | |shapes, in situations arising from real-world applications | |
| | |Using imperial, metric and conversions when necessary | |
|4 |Maximizing Area for a |Maximum area for a given perimeter |GT2.2,GT2.1 |
| |Given Perimeter | | |
| | |Problem: Cagey Problem, Why are copper wires round? | |
| |Lesson Included | | |
|5 |Minimizing Perimeter |Minimum perimeter for a given area |GT2.2,GT2.1 |
| | | | |
| |Lesson Included *New |Problem: Fencing | |
| |Jan/08* | | |
|6 | |Jazz Day | |
|7 | |Volume problems involving rectangular prisms, triangular prisms, cylinders, and |GT1.3 |
| | |composite figures | |
| | |Using imperial, metric and conversions when necessary | |
| | |Example: Volume of Concrete Pad in cubic meters with initial measurements in feet and| |
| | |inches. Example 8’ x 24’ x 4” | |
|8 | |Surface area problems involving rectangular prisms, triangular prisms, cylinders, and|GT1.3 |
| | |composite figures | |
| | |Using imperial, metric and conversions when necessary | |
|9 |Maximum Volume of a |Maximum volume for a given surface area |GT2.3,GT2.1 |
| |Triangular Prism |Using imperial, metric and conversions when necessary | |
| | | | |
| |Lesson Included | | |
|10 |Minimum Surface Area of a|Minimum surface area for a given volume |GT2.3,GT2.1 |
| |Cylinder |Using imperial, metric and conversions when necessary | |
| | | | |
| |Lesson Included | | |
|11-13 |Keeping the Kandies |Summative Task | |
| | |Packaging Project | |
| |Summative Included | | |
| |M.O.* | | |
|Unit 5: Day 1: Exploring Relationships between Metric and Imperial | |
| |Math Learning Goals: |Materials |
|Minds On: 10 |Explore relationships that exist between metric and imperial measuring systems |BLM 5.1.1 |
| | |BLM 5.1.2 |
| | |BLM 5.1.3 |
| | |Measuring tapes with |
| | |metric and imperial |
| | |measures |
| | |Graphing Calculators or |
| | |statistics software |
|Action: 35 | | |
|Consolidate:30 | | |
|Total=75 min | | |
| Assessment |
|Opportunities |
| |Minds On… |Whole Class ( Discussion | |When adding units to the|
| | |Put the titles “Metric” and “Imperial” on the board. Ask students to list several units of | |list, question students |
| | |measure (for distance, weight or volume) and discuss whether the suggestions belong to the metric | |whether they are |
| | |or imperial system. | |distance, volume, mass, |
| | |Determine if students are already aware of relationships between metric and imperial systems. | |etc. |
| | |(e.g. Some students may already know that there are 2.54 cm in an inch or that there are 12 inches| | |
| | |in a foot.) | |When adding several |
| | |Discuss where each system of measure is currently in use and the need to be able to convert | |measures of one type, |
| | |between systems. | |ask students to order |
| | |Mathematical Process Focus: Reflecting Students reflect on prior knowledge of measurement units | |them by size (eg. If |
| | |and conversions | |students say yards, |
| | | | |inches and feet are all |
| | | | |imperial distance |
| | | | |measures, ask them which|
| | | | |is biggest and which is |
| | | | |smallest of the three |
| | | | |given. |
| | | |[p| |
| | | |ic| |
| | | |] | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | |Gimli Glider info can be|
| | | | |found at: |
| | | | |
| | | | |wiki/Gimli_Glider |
| | | | |And the news report at: |
| | | | |
| | | | |DC-1-69-240-1155-20/that|
| | | | |_was_then/life_society/g|
| | | | |imli_glider |
| | | | | |
| |Action! |Pairs ( Investigation | | |
| | |Explain to students that they will be measuring several objects around the classroom today in both| | |
| | |metric and imperial units. They will then be required to perform a regression (as in unit 2 of | | |
| | |the course) to determine the relationship between the two units of measure. Distribute BLM 5.1.1 | | |
| | |to each pair to perform the investigation. | | |
| | |Learning Skills/Observation/Mental Note: Assess teamwork skills as you circulate. | | |
| | |Mathematical Process Focus: Connecting – students connect prior knowledge of linear regression | | |
| | |with finding a relationship between the lengths of inches and centimetres, yards and metres, etc. | | |
| | | | | |
| |Consolidate |Whole Class ( Sharing Results | | |
| |Debrief |For each activity, have students write their equation of the line of best fit on the board as | | |
| | |shown in BLM 5.1.3. Using the equations, decide on the appropriate conversion factor for each | | |
| | |activity. | | |
| | |Whole Class ( Board Note | | |
| | |Using BLM 5.1.3 as a guide, show students how to perform conversions of distances and areas. | | |
| | |Whole Class ( Discussion | | |
| | |Discuss other units of measure and their conversion factors. | | |
| | |Give the example of the Gimli Glider incident to show the importance of proper/correct conversions| | |
| | |(and to peak their interests). In particular, ask the students to determine how much fuel they | | |
| | |were short for the flight (the plane needed 22,300kg of fuel, but was loaded with 22,300pounds | | |
| | |instead) | | |
| | | | | |
|Exploration |Home Activity or Further Classroom Consolidation | | |
|Skill Practice |Complete BLM 5.1.2 | | |
5.1.1: Metric and Imperial: What’s the Relationship?
Exploring Centimetres and Inches
Data Collection
1. Measure 5 objects of varying sizes around the classroom.
2. Measure each object two times: once in centimetres and once in inches.
3. Record your results in the table.
|Object |Length in Inches |Length in Centimetres |
| | | |
| | | |
| | | |
| | | |
| | | |
Analyze the data
4. Enter your data into a spreadsheet or graphing calculator.
5. Perform a linear regression to obtain the equation of the line of best fit.
Line of Best Fit: ___________________________________
Interpret your findings
6. Measure another object in the classroom in inches.
Object: ________________________ Length in inches: __________
7. Use your line of best fit to calculate the length in centimetres.
8. Now measure the item in centimetres. How close was your calculation to your measurement?
9. How do you convert lengths given in inches to centimetres?
10. How do you convert lengths given in centimetres to inches?
5.1.1: Metric and Imperial: What’s the Relationship? (Continued)
Exploring Centimetres2 and Inches2
You have determined a relationship between centimetres and inches, which can be used to convert lengths or distances. Now, you will determine a relationship to convert areas in inches2 and centimetres2.
Hypothesis
1. Do you think the relationship between inches2 and centimetres2 is the same as the relationship you found between centimetres and inches? Explain.
(example: how would you convert 12 cm2 to inches2?)
Data Collection
2. Measure the area of 5 objects of varying sizes around the classroom.
3. Measure the area of each object two times: once in inches 2 and once in centimetres2.
4. Record your results in the table.
|Object |Area in Inches2 |Area in Centimetres2 |
| | | |
| | | |
| | | |
| | | |
| | | |
Analyze the data
5. Enter your data into a spreadsheet or graphing calculator.
6. Perform a linear regression to obtain the equation of the line of best fit.
Line of Best Fit: ___________________________________
Interpret your findings
7. Do your findings agree or disagree with your hypothesis? Explain.
8. How do you convert areas given in inches2 to centimetres2?
10. How do you convert areas given in centimetres2 to inches2?
5.1.1: Metric and Imperial: What’s the Relationship? (Continued)
Exploring Metres and Yards
Data Collection
1. Measure 5 objects of varying sizes around the classroom.
2. Measure each object two times: once in metres and once in yards.
3. Record your results in the table.
|Object |Length in Metres |Length in Yards |
| | | |
| | | |
| | | |
| | | |
| | | |
Analyze the data
4. Enter your data into a spreadsheet or graphing calculator.
5. Perform a linear regression to obtain the equation of the line of best fit.
Line of Best Fit: ___________________________________
Interpret your findings
6. Measure another object in the classroom in metres.
Object: ________________________ Length in metres: __________
7. Use your line of best fit to calculate the length in yards.
8. Now measure the item in yards. How close was your calculation to your measurement?
9. How do you convert lengths given in metres to yards?
10. How do you convert lengths given in yards to metres?
5.1.2: Metric and Imperial Conversions
1. Perform the following conversions using the relationships determined in class today.
a) 15 cm = _____________ inches b) 20 inches = ____________ cm
c) 7 3/8 inches = ___________ cm d) 10.4 cm = ___________ inches
e) 6 yards = ___________ m f) 18 m = ___________ yards
g) 4 yards 2 feet = ___________ m h) 16 m 52 cm = ___________ yards
2. Another set of distance measurements commonly used are miles and kilometres.
a) What unit of distance do you think is longer, a mile or a kilometre?
b) There are 1760 yards in a mile. Convert this number to metres.
c) How many metres are in a kilometre?
d) Which unit of distance is longer, the mile or the kilometre?
e) Determine the relationship between miles and kilometres based on your above calculations.
3. Converting areas is not the same as converting distances. Below is a different method you can use to convert areas in different units of measurement if you already know the appropriate conversions for lengths.
Convert 16 miles2 to km2 by following the steps outlined below.
a) Consider 1 mile2. Convert the side lengths to kilometres.
b) Calculate the area in km2.
c) Use the information obtained in parts a) and b) to convert 16 miles2 to km2.
4. Use any method to convert 30 inches3 to cm3.
5.1.3: Metric and Imperial Conversions (Teacher Notes)
Board Note (for Consolidation):
Line of Best Fit Line of Best Fit Line of Best Fit
(Inches – Centimetres) (Inches2 – Centimetres2) (Metres – Yards)
(Have students write their lines of best fit for each of these scenarios on the board.)
There are approximately 2.54 cm in an inch.
There are approximately 6.45 cm2 in an inch2.
There are approximately 1.09 yards in a metre.
Performing Conversions
1. Perform the following conversions using the relationships determined in class today.
a) 5 7/8 inches = ___________ cm b) 21.2 cm = ___________ inches
[pic] [pic]
[pic] [pic]
[pic] [pic]
[pic] [pic]
c) 3 yards 1 foot = ___________ m d) 14 m 33 cm = ___________ yards
e) 42 cm2 = _____________ inches2 f) 15 inches2 = ____________ cm2
[pic]
[pic]
[pic]
[pic]
2. A Canadian Football League playing field is 110 yards by 65 yards. Determine the area of the football field in m2.
* Allow students to try this question as a think-pair-share. Hopefully you will see at least 2 different solutions (determine the area, then convert to metric; convert the dimensions to metric then determine the area)
Instead of 22,300 kg of fuel, they had 22,300 pounds on board
|Unit 5: Day 5: Minimizing Perimeter | |
| |Math Learning Goals: |Materials |
|Minds On: 10 |Determine minimum perimeter for a given area. |Geometer’s Sketchpad |
| |Compare minimizing perimeter for a set area with maximizing area for a set perimeter |U5L5_GSP1 |
| | |BLM 5.5.1 |
| | |BLM 5.5.2 |
|Action: 45 | | |
|Consolidate:20 | | |
|Total=75 min | | |
| Assessment |
|Opportunities |
| |Minds On… |Think, Pair, Share ( Discussion | | |
| | |Put two questions on the board: | | |
| | |1. Determine the dimensions of the right triangle with a maximum area where the perimeter must | | |
| | |be 32 inches. | | |
| | |2. Determine the dimensions of the right triangle with a minimum perimeter where the area must | | |
| | |be 40 inches2. | | |
| | |Have students discuss with a partner the similarities and differences between these two questions.|[p| |
| | |During the discussion, prompt students to focus on what information is given, what is required to |ic| |
| | |be found, and what process might you go through to solve the problems. |] | |
| | |Point out to students that the first question was from the previous day’s lesson and the second | | |
| | |question will be the focus of today’s lesson. | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | |[p| |
| | | |ic| |
| | | |] | |
| | | | | |
| | | | | |
| | | |[p| |
| | | |ic| |
| | | |] |Students should have |
| | | | |access to U5L5_GSP1 |
| | | | | |
| |Action! |Individual ( Investigation | | |
| | |Distribute BLM 5.5.1 to students and direct them to the GSP file that they should use as an aid in| | |
| | |completing the investigation. | | |
| | |Reasoning and Proving/Observation/Mental Note: Circulate and give students feedback on their work.| | |
| | | | | |
| | |Mathematical Process Focus: Reasoning and Proving – students are required to investigate several | | |
| | |different options and must argue why the option they chose is the best one. | | |
| | | | | |
| | | | | |
| |Consolidate |Student Grouping ( Instructional Strategy | | |
| |Debrief |Distribute BLM 5.5.2 and instruct students on how to manually find the dimensions now that we have| | |
| | |determined some special relationships (Refer to BLM 5.5.2 (Teacher notes). (i.e. That the optimal| | |
| | |dimensions for a rectangle must be a square and that the optimal dimensions for a right triangle | | |
| | |is a right isosceles triangle.) | | |
| | | | | |
| |Home Activity or Further Classroom Consolidation | | |
|Concept Practice |Complete questions 1 and 2 at the bottom of BLM 5.5.2 | | |
5.5.1: Park Beautification
A local park’s officials have been given a grant to beautify its facilities. Along with new playground equipment and repainting of all the buildings, a garden is to be planted somewhere on the grounds.
Three different locations have been chosen for the garden. However, the brick used to line the perimeter of the garden is quite expensive. You will examine the three different locations for a garden area of 20 m2 and decide which option will be cheapest to border with the chosen brick.
Using Geometer’s Sketchpad, open the provided file and examine the three different options.
Option 1: A Circular Garden with Fountain
The beautification committee has chosen the centre of the park as its first option. They would like to build a circular garden and place a fountain in the middle.
In this case, there will only be one possible set of dimensions. Determine the radius and circumference of a circle with an area of 20m2.
Area = 20m2 Radius = ____________ Circumference = _____________
Option 2: A Rectangular Garden Surrounding the Park Sign
The committee’s second option is near the entrance of the park. Here, the garden would surround the welcome sign to the park.
For this case, you must consider at least 8 different dimensions for the length and width of the garden. Remember, you would like an area of 20m2 and you are trying to minimize the perimeter of the garden.
|Length |Width |Area |Perimeter |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
Hypothesis: Based on your trials, what do you think are the best dimensions of the garden for this option?
5.5.1: Park Beautification (Continued)
Option 3: A Right Triangular Garden Near the Playground
The committee’s final option is in a corner of the park near the playground.
For this case, you must consider at least 8 different dimensions for the height and base of the right triangle. Remember, you would like an area of 20m2 and you are trying to minimize the perimeter of the garden.
|Height |Base |Area |Perimeter |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
Hypothesis: Based on your trials, what do you think are the best dimensions of the garden for this option?
Selecting the Best Option
You have now had a chance to investigate several different options for the placement of a garden in the park. What recommendation would you make to the park beautification committee based on your research? Be sure to justify your recommendation.
5.5.2: Calculating Dimensions: Maximum Area / Minimum Perimeter
1. Determine the perimeter of a circle with an area of 144 inches2.
2. Determine the minimum perimeter of a rectangle with an area of 18 mm2.
3. Determine the minimum perimeter of a right-angled triangle with an area of 52 ft2.
Maximizing Area and Minimizing Perimeter: Practise
Complete the following questions on lined paper.
1. Determine the maximum area for each of the following shapes.
a) a circle with a circumference of 15 cm.
b) a rectangle with a perimeter of 34 m.
c) a right-angled triangle with a perimeter of 18 mm.
2. Determine the minimum perimeter for each of the following shapes.
a) a circle with an area of 256 yards2.
b) a rectangle with an area of 92 inches2.
c) a right-angled triangle with an area of 13 dam2.
3. Determine the minimum amount of fencing needed for each of the following: (Note: you will have to create a table for these ones)
a) A rectangle garden to be fenced on all 4 sides, with an area of 9 yards2.
b) A rectangle garden only to be fenced on 3 sides, with an area of 18 yards2.
c) A rectangle garden only to be fenced on 2 sides, with an area of 36 yards2.
d) What do you notice about your answers from a – c? Why do you think this is the case?
5.5.2: Calculating Dimensions: Maximum Area / Minimum Perimeter (Teacher Notes)
1. Determine the perimeter of a circle with an area of 144 inches2.
[pic] [pic]
[pic] [pic]
[pic] [pic]
[pic]
[pic]
[pic]
2. Determine the minimum perimeter of a rectangle with an area of 18 mm2.
To get optimal dimensions, we must have a square, so l=w
[pic] [pic]
[pic] [pic]
[pic] [pic]
[pic]
3. Determine the minimum perimeter of a right-angled triangle with an area of 52 ft2.
[pic] We know from yesterday’s work:
[pic] [pic]
[pic] [pic]
[pic]
but b=h since we have an isosceles triangle
[pic]
[pic]
[pic]
-----------------------
1 mile
1 mile
1 mile2
? km2
? km
? km
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- content domain measurement
- write down the page number
- metric vs imperial which would you choose
- unit conversion lab urban steelworks
- the following tables show some of the more common
- temperature conversions
- metrics measurements and computations
- centimetres and inches what s the relationship
- lesson objectives open school bc home page