Study Guide to Go
Study Guide to Go
Chapter 8: Maintaining Control and Improving Quality
Chapter Outlines
Fundamentals of Organizational Control
Types of Control
Components of Organizational Control Systems
Identifying Control Problems
The Quality Challenge
Defining Quality
Five Types of Product Quality
Unique Challenges for Service Providers
Defining Service Quality
An Introduction to Total Quality Management (TQM)
1. Do It Right the First Time
2. Be Customer-Centered
3. Make Continuous Improvement a Way of Life
4. Build Teamwork and Empowerment
The Seven Basic TQM Process Improvement Tools
Deming Management
Principles of Deming Management
Deming’s 14 Points
Glossary
control taking preventive or corrective actions to keep things on track.
feedforward control active anticipation and prevention of problems, rather than passive reaction.
concurrent control monitoring and adjusting ongoing activities and processes.
feedback control checking a completed activity and learning from mistakes.
benchmarking identifying, studying, and building upon the best practices of organizational role models.
executive reality check top managers periodically working at lower-level jobs to become more aware of operations.
internal auditing independent appraisal of organizational operations and systems to assess effectiveness and efficiency.
quality conformance to requirements.
total quality management (TQM) creating an organizational culture committed to continuous improvement in every regard.
internal customer anyone in your organization who cannot do a good job unless you do a good job.
customer-centered satisfying the customers needs by anticipating, listening, and responding.
kaizen a Japanese word meaning continuous improvement.
flow chart graphic display of a sequence of activities and decisions.
fishbone diagram a cause-and-effect diagram.
Pareto analysis bar chart indicating which problem needs the most attention.
control chart visual aid showing acceptable and unacceptable variations from the norm for repetitive operations.
histogram bar chart indicating deviations from a standard bell-shaped curve.
scatter diagram diagram that plots relationships between two variables.
run chart a trend chart for tracking a variable over time.
Deming management application of W. Edwards Demings ideas for more responsive, more democratic, and less wasteful organizations.
PDCA cycle Demings plan-do-check-act cycle, which relies on observed data to continuously improve operations.
Learning Objective Summary
Learning Objective 1: Describe three types of control, and identify the components common to all control systems.
• Feedforward control is preventive in nature.
• Feedback control is based on the evaluation of past performance.
• Concurrent control occurs when managers monitor and adjust ongoing operations to keep them performing to
standard.
• The three basic components of organizational control systems are objectives, standards, and an evaluation reward system.
Learning Objective 2: Identify five types of product quality, explain how providing a service differs from manufacturing a product, and list the five service-quality dimensions.
• Product quality involves much more than the basic idea of “conformance to requirements.”
• Five types of product quality are transcendent, product-based, user-based, manufacturing-based, and value-based.
• Service providers face a unique set of challenges that distinguish them from manufacturers:
- Direct customer participation
- Immediate consumption of services
- Provision of services at customers’ convenience
- Tendency of services to be more labor-intensive than manufacturing
- Intangibility of services, making them harder to measure
• Consumer research uncovered five service-quality dimensions: reliability, assurance, tangibles, empathy, and responsiveness (RATER). Consumers consistently rank reliability number one.
Learning Objective 3: Define total quality management (TQM), discuss the basic TQM principles, and describe at least three of the seven TQM process improvement tools.
• Total quality management (TQM) involves creating a culture that is dedicated to customer-centered, employee-driven continuous improvement.
• The four TQM principles are:
- Do it right the first time.
- Be customer-centered.
- Make continuous improvement a way of life.
- Build teamwork and empowerment.
• Seven basic TQM process improvement tools are flow charts, fishbone diagrams, Pareto analysis, control charts, histograms, scatter diagrams, and run charts.
Learning Objective 4: Explain how Deming’s PDCA cycle can improve the overall management process, and identify at least four of Deming’s famous 14 points.
• Deming’s plan-do-check-act (PDCA) cycle forces managers to make decisions and take actions on the basis of observed and carefully measured data.
• PDCA work never ends because lessons learned from one cycle are incorporated into the next.
• Deming’s famous 14 points seek to revolutionize Western management practices:
- In general, they urge managers to seek continuous improvement through extensive training, leadership, teamwork, and self-improvement.
- The points call for doing away with mass quality inspections, selecting suppliers only on the basis of low cost, fear, slogans and numerical quotas, and barriers to pride in workmanship.
• Transformation, according to Deming, is everyone’s job.
Test Preppers
Test Prepper 8.1
True or False?
_____ 1. The control function involves preventive or corrective actions.
_____ 2. An example of feedforward control is putting a higher grade of gasoline into your car to keep it running well.
_____ 3. The organization’s culture is a control subsystem.
_____ 4. Although objectives are useful performance targets, they are of little practical use in the control function.
_____ 5. The essence of executive reality checking is hiring outside consultants to monitor how well the organization is doing.
_____ 6. Employee dissatisfaction can be a sign of inadequate control.
Multiple Choice
_____ 7. To measure performance during the control function, _____ serve as yardsticks.
a. organization charts
b. budgets
c. strategic plans
d. operational plans
e. objectives
_____ 8. _____ control involves monitoring and adjusting ongoing activities and processes.
a. Benchmarking
b. Concurrent
c. Quality
d. Feedback
e. Feedforward
_____ 9. An air-freight shipping company must constantly keep a close eye on the weather. This is an example of what kind of control?
a. Secondary
b. Preliminary
c. Feedforward
d. Feedback
e. Conventional
_____ 10. Which of these involves identifying, studying, and building upon the best practices of organizational role models?
a. Benchmarking
b. Kaizen
c. Pareto analysis
d. PDCA cycle
e. TQM
_____ 11. Bidu has implemented a new strategy at his public accounting firm for identifying control problems. He has asked a group of employees to appraise various operations and systems within the firm. Which control technique is Bidu implementing?
a. Concurrent control
b. External auditing
c. Executive reality check
d. Social auditing
e. Internal auditing
Test Prepper 8.2
True or False?
_____ 1. According to Philip Crosby, “conformance to requirements” is the basic definition of quality.
_____ 2. Another name for value-based quality is manufacturing-based quality.
_____ 3. Because they are intangible, services cannot be measured.
_____ 4. “Assurance” was identified by Texas A&M researchers as one of the five service quality dimensions.
Multiple Choice
_____ 5. Which of the following is not a product quality type?
a. Feature-based quality
b. Transcendent quality
c. Product-based quality
d. User-based quality
e. Value-based quality
_____ 6. When a textile manufacturing manager does a cost-benefit analysis on a new state-of-the-art stitching machine, the type of product quality at issue is
a. value-based.
b. product-based.
c. user-based.
d. manufacturing-based.
e. transcendent.
_____ 7. The RATER service-quality dimension that relates to the provision of caring and individualized attention to customers is
a. assurance.
b. reliability.
c. responsiveness.
d. professionalism.
e. empathy.
Test Prepper 8.3
True or False?
_____ 1. TQM has no connection with the organization’s culture (an internal factor) because it is customer-driven (an external force).
_____ 2. Kaizen is a Chinese word meaning “rise above.”
_____ 3. Empowering employees at all levels is at the heart of TQM.
_____ 4. To reduce costs and eliminate unnecessary steps, managers should use flowcharts.
_____ 5. A data point between the upper and lower control limits indicates acceptable quality on a control chart.
Multiple Choice
_____ 6. What is at the core of the definition of total quality management (TQM)?
a. Visionary leadership
b. Employee satisfaction
c. Pride
d. Continuous improvement
e. Motivation
_____ 7. One of the four principles of TQM is
a. do it right the first time.
b. inspecting everything twice.
c. striving for zero defects.
d. people are the biggest threat to quality improvement.
e. technology is the key.
_____ 8. Kaizen practitioners view quality as
a. a journey, not a destination.
b. the only reality.
c. perfection.
d. spiritual fulfillment.
e. the ultimate end.
_____ 9. A TQM tool that would be useful for identifying the roughly 20 percent of a supermarket’s employees who are responsible for about 80 percent of the absenteeism is
a. benchmarking.
b. fishbone diagram.
c. flowcharting.
d. Pareto analysis.
e. run chart.
_____ 10. Which of these would be most appropriate for graphically plotting the correlation between two product characteristics, such as the diameter and weight of tennis balls?
a. A fishbone diagram
b. A histogram
c. A run chart
d. A scatter diagram
e. A control chart
Test Prepper 8.4
True or False?
_____ 1. Deming’s quality management philosophy is a direct outgrowth of Taylor’s scientific management.
_____ 2. Deming believed quality improvement drives the entire economy.
_____ 3. In Deming’s PDCA cycle, the “C” stands for “corrective action.”
_____ 4. One of Deming’s 14 points recommends getting rid of numerical quotas.
Multiple Choice
_____ 5. According to Deming, _____ is the most important part of the production line.
a. the consumer
b. the employee
c. the supervisor
d. engineering
e. technology
_____ 6. Who or what did Deming blame up to 85 percent of substandard quality on?
a. Lazy workers
b. Substandard materials
c. The system
d. Careless management
e. Poorly maintained machinery
_____ 7. What does “A” in Deming’s PDCA cycle stand for?
a. Alternatives
b. Act
c. Activities
d. Attitudes
e. Actual results
Test Prepper Answer Key
8.1
1. T 2. T 3. T 4. F 5. F 6. T 7. e 8. b 9. c 10. a 11. e
8.2
1. T 2. F 3. F 4. T 5. d 6. a 7. e
8.3
1. F 2. F 3. F 4. a 5. T 6. d 7. a 8. a 9. d 10. d
8.4
1. F 2. T 3. F 4. T 5. a 6. c 7. b
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- photosynthesis study guide answers
- genesis study guide pdf
- 6th grade science study guide pdf
- biology 101 study guide printable
- ftce study guide pdf
- study guide for philosophy 101
- photosynthesis study guide quizlet
- science ged study guide 2019
- clep college composition study guide pdf
- study guide for photosynthesis pdf
- ged practice study guide pdf
- personal finance study guide pdf