Series and Parallel Circuits 1 Lab - University of Michigan



Instructor Outline:UM Physics Demo Lab 07/2013Series and Parallel Circuits I Lab length: 70 minutesLab objective: Instruct the students about series circuits, parallel circuits, voltage, current, Kirchhoff’s Loop Rule, Kirchhoff’s Junction Rule, Ohm’s Law and power. Materials1 Green multimeter (with leads)1 battery board1 alligator lead cardSuggested Demonstrations: NoneExploration stage: 50 minutes – Group Lab-WorkThe students build a simple circuit and measure voltage and current. They observe that current is the same throughout the circuit, but that voltage depends on the enclosed components. The students then build a two-bulb circuit and measure voltage and current. They add a third bulb and see how that affects the overall voltage and current. They then build a two bulb parallel circuit. They measure voltage and current and then calculate and compare the power dissipated by two bulbs in series and in parallel.Summary: 20 minutes – lectureThe concepts of series circuit elements, parallel circuit elements, voltage, current, and power are reviewed and discussed in further detail. Kirchhoff’s Loop Rule and Junction Rule are formally introduced. The connection is made between the Loop Rule and the conservative nature of the electric force, recalling the conservative nature of gravity as a previous example. The Junction Rule is compared to the condition of continuity for a flowing fluid.Concepts Developed:The total voltage available to a circuit is determined by the number of cells in series for the source battery.The electric force in a DC circuit is conservative.The sum of the component’s voltages in a series circuit is equal to the voltage of the source (Kirchhoff’s Loop Rule). The Loop Rule results from the conservative nature of the electric force and is equivalent to the statement that the electric force does no net work over a closed loop path, exactly the same as for gravity.The current is the same throughout each element of a series circuit.The current is inversely proportional to the number of resistors (bulbs) in the circuit (Ohm’ Law).The current divides in a parallel circuit, but the total current must be conserved (continuity, charge conservation and the Junction Rule).The voltage across each component in a parallel circuit is the same and equal to the source voltage. This implies that the voltage across each element in a series circuit is less than that for a parallel circuit for the same source potential (battery voltage). Power/brightness is the product of the voltage across a bulb and the current flowing through it. ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download