UBS SYSTEM NETWORK INSTALLATION



UBS NETWORK SYSTEM INSTALLATION- (For USB Device)

CONTENTS PAGE

1) System requirement 2

2) Check list 3

3) Win95 /98 /ME Installation 4 ~5

4) Windows NT 4x / Nt Workstation Installation 6

5) Windows 2000 / 2000 Pro./ Windows XP Installation 7 ~10

6) Error Code 11

System Requirement

Server

• Pentium II 300MHZ or above

• At least 500 MB harddisk spaces

• 64 Ram memory and above

• 10 /100 mbps base network card

• 10 /100 mbps base hubs / Switch (8 /16/24 ports)

• UTP cable (RJ 45) or BNC cable

• USB port

Workstation

• Pentium II 300MHZ or above

• 16 Ram memory and above

• At least 500 MB harddisk spaces

• 10 /100 mbps base network card

UBS Software

• This note covers for those users only install version 9.0 dated 15 September 2003 or above

Check List

❑ Is the LAN card (Ethernet Card) already installed into the system?

❑ Is the network cabling install properly

❑ Which version of Operating Systems (OS) installed in your computer

❑ Installed TCP/IP protocol?

❑ Is the correct Smart Lock plugged in firmly?

❑ Is UBS system fully installed ?

❑ Changed the LAN setting in UBS Menu?

❑ Able to find the server contents through workstation?

❑ Ever try to install on another computer to do the test?

❑ What do you see in the UBS Login Menu?

WIN 95 /98 /ME Installation

UBS WINDOWS Version 9.0

In server

• Make sure the network protocol ‘TCP/IP’ have been properly installed. In UBS windows version , you can remove the ‘Netbeui’ protocol.

• Install UBS windows version

• Share the UBS program folder in windows explorer as full access right.(eg ubsacc90)

• Tick setting button after click on UBS system

[pic]

• Select windows 95 or 98 button

• Click on “Add USBSERVER2K.EXE” to the Startup Group” then press OK button

[pic]

• Activate USB service in startup folder (click Start ( Programs ( Startup( USB lan)

WIN 95 /98 /ME Installation

UBS WINDOWS Version 9.0 (cont/ …)

In workstation

- For every workstation install the UBS program into local drive eg C:

- Drag the shortcut from server as target name \\Servername\ubsacc90\daccount.exe

- In UBS multi company table create as below.

EXAMPLE:

Company Name Directory

ABC \\Servername\ubsacc90\abc\

- For the report directory please set as \\servername\ubsacc90\reports\

WINDOWS NT 4.x Server / Nt Workstation Installation

USB key does not support on windows Nt operating system , because Nt system didn’t build in the USB plug & play device.

Windows 2000 Server/Pro ,Windows XP Home/Pro installation

UBS Windows Version 9.0

In Server

1) Make Sure the computer/Server MUST be network-connected condition.

2) Network protocol “TCP/IP” must be installed (Control Panel ( Network)

3) Plug-in the UBS USB Lan Lock into the USB port , this will depend on computer has such USB connection . No additional driver install and it will auto detect.

4) Installing UBS Software accordingly.

5) Next, you can click on UBS system, select Setting button.

[pic]

• Select either one of the Windows 2000 Server, Windows Professional or Windows XP

• Click on “USB LAN Registration Version 1.0”

[pic]

Windows 2000 Server/Pro ,Windows XP Home/Pro installation

UBS Windows Version 9.0 (Cont /---)

6) After finish the installation, make sure you have highlighted the UBS folder and click File ( Sharing under Windows Explorer to share UBS folder to the correct user with FULL rights under Permissions.

7) Select Program ( Administrative Tools ( Services

[pic]

8) Double click on “USBLAN_Ldr”

[pic]

Windows 2000 Server/Pro ,Windows XP Home/Pro installation

UBS Windows Version 9.0 (Cont /---)

9) Click on Start button and press OK button after the step done

[pic]

10) The next will prompt the dialog box , select Yes button

[pic]

Windows 2000 Server/Pro ,Windows XP Home/Pro installation

UBS Windows Version 9.0 (Cont /---)

11) If the system prompt below, the installation is successful.

[pic]

In Workstation

- For every workstation install the UBS program into local drive eg C:

- Drag the shortcut from server as target name \\Servername\ubsacc90\daccount.exe

- In UBS multi company table create as below.

EXAMPLE:

Company Name Directory

ABC \\Servername\ubsacc90\abc\

- For the report directory please set as \\servername\ubsacc90\reports\

Error code

This message (refer to diagram below) indicates UBS system cannot detect the correct software for USB devices.

Solution : -

• You have to pluck the correct USB into the USB port

[pic]

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download