Www.v-checker.com



HUD car head-up system

User manual

In order to let you experience the speed while ensuring your driving pleasure and driving safety.Before using this product, please read the instruction manual carefully to fully understand and utilize all the functions of the product.

• Product description

Car head-up display, referred to as HUD. When the vehicle is driving at a high speed, especially during high-speed driving at night, the driver looks down at the meter display. If there is an emergency in front of the vehicle, it may cause an accident due to the lack of effective action. In order to avoid this, the head-up display (HUD) system can mirror important information displayed by the meter (such as the speed of the vehicle) to the driver's head-up range of the front windshield during the driving, and display the position and the brightness automatically. In this way, you can avoid looking down at the dashboard, thus shortening the blind time of the eyeball to the front. Avoid over-speed violations in many speed-limiting sections, and more importantly, it allows the driver to instantly read in the absence of a large field of view.

[pic]

• Product appearance

[pic]

Description of each part of HUD:

01. USB data interface

02.【Up】key, toggle up

03.【OK】key, press down vertically

04.【Down】key, toggle down

05. Power switch

• Function description

[pic]

01. Real time (Beijing time) icon.

02. Fatigue driving, alarm icon.

03. Travel to the destination, mileage icon.

04. Travel to the destination, time-consuming icon.

05. Navigation arrow direction display area: Match the navigation function of the mobile phone APP to display the direction of travel of the vehicle.

06. Speed ​​camera display area: Match the navigation function of the mobile phone APP to display the front speed limit information (speed limit value, distance).

07. System settings icon.

08. Vehicle speed icon.

09. Buzzer, alarm icon.

10. Unit symbol: KM/H-km/h, MPH-miles per hour.

11. Speed ​​display area.

12. Compass display area: Displays the current driving direction.

E (East), ES (Southeast)

S (South), SW (Southwest)

W (West), WN (Northwest)

N (North), NE (Northeast)

13. GPS signal indication:

Flashing display - searching for satellite signals,

Constantly displayed - satellite signal has been searched

14. Photosensitive element: Automatically adjusts the display brightness as the brightness of the outside changes.

15. Comprehensive statistics icon: TIME-time, KM-km, M-meter.

16. Cycle display area: You can switch the real-time time, the current travel time, and the mileage.

• First time use

After connecting the HUD display, data cable and car cigarette lighter socket, turn on the HUD power switch, flashing “Hud”, the host will boot normally.

[pic]

• Host use alone: 3 Display mode

When the HUD host is used alone, you can press the OK button to switch the displayed content.

[pic]

Speed + Compass + Cycle display (Real time, Current travel time, Current mileage)

[pic]

Speed + Compass

[pic]

Speed

• Host and mobile phone use

When the HUD host is used online with the mobile app, the navigation information will be displayed synchronously according to the map.

The host can make a Bluetooth wireless connection with the smartphone, and the navigation information is displayed synchronously through the APP. However, the following conditions must be met to achieve this function.

• Supported smartphone systems: Android 5.0, iOS (iPhone 5 and above)

• Apple phone: Enter “HUD Navigation” in the APP Store, download and install. Scan the QR code below to download and install it.

[pic]

• Android phone: Scan the QR code below to download and install.

[pic]

General browser scanning

After installing the APP software correctly, click the “HUD Navigation” icon, the system will automatically search for Bluetooth devices and connect.

If your phone is not properly connected to your Bluetooth device, follow the instructions below:

• Is the host turned on?

Turn on the power switch of the main unit and the screen will display. Otherwise, charge the main unit with the charging cable.

• Is the mobile phone Bluetooth connected to other devices?

Delete the paired Bluetooth devices and then bind the host.

• Try to restart Bluetooth.

After the host is powered on normally and the phone is still not searchable after it is close, you can try to restart the phone Bluetooth.

• Try restarting your phone.

If restarting the host is invalid, please try restarting your phone.

[pic]

Speed + Compass + Navigation direction

[pic]

Speed + Compass + Limited Speed camera

• Setting

In the normal working state of HUD, press and hold the [OK] key for 3 seconds to enter the HUD setting interface. You can enter the setting by pressing the up and down keys to the desired setting and pressing the [OK] key. After the setting is completed, press the [OK] key to save. The machine will automatically return to the normal working state in about 8 seconds.

[pic]

01. Settings: Buzzer (default: ON)

      01: ON, 02: OFF

02. Setting: Speed ​​alarm (default: 120KM/H)

03. Settings: Fatigue driving alarm (default: 02:00 hours)

04. Settings: HUD display brightness (default: 00, automatic), The higher the value, the brighter the brightness

05. Settings: HUD's loop display mode or fixed display content (default: 00, Automatic cycle display)

01: Fixed display (real time)

02: Fixed display (this driving time)

03: Fixed display (this mileage)

06: Setting: speed coefficient (default: 100)

If the speed displayed on the HUD does not match the dashboard, this parameter calibration can be adjusted.

07. Settings: Navigation priority display (default: priority speed camera)

       01: Priority arrow direction

       02: Priority speed camera

03: System Smart Mode

08. Settings: Auto power off time (default: 3 minutes)

09. Settings: boot sensitivity (default: 50)

      Automatically start up by judging the vibration of the vehicle. The bigger the value, the more sensitive

• Restore factory settings

Step 1: Turn off the power switch of the main unit.

Step 2: Turn on the power switch while holding down the [OK] key.

Step 3: “0” is displayed in the middle of HUD, the factory setting is completed.

• Preparation before installation and use

01. Use the included non-slip mat to place it in a flat position in front of the bridge. The HUD main unit can be placed on top and adjusted at any time.

02. Insert the USB interface on the data into the main unit, insert the cigarette lighter interface on the car, and open the vehicle key.

03. The host screen is displayed and can be used normally.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download