Www.math.lsu.edu



Math 1550 Calculus ITopics with Section CommentsThis is an introductory calculus course designed primarily for students pursuing an engineering major or certain other technical majors. The student is assumed to be well versed in the standard pre-calculus topics of functions, graphing, solving equations and the exponential, logarithmic and trigonometric functions. Basic skills the students should acquire during the courseLimits and ContinuityEvaluate limits from a graphEvaluate limits at points of continuityEvaluate limits of indeterminate forms using algebraic simplifications and l’H?pital’s ruleKnow what continuity implies about a graph and behavior of a functionDetermine points of discontinuity for functions defined as formulas or graphsDifferentiationKnow the various interpretations of the derivative (velocity, rate of change, slope of tangent line)Evaluate the derivatives of simple functions using a difference quotientEvaluate the derivatives of combinations of the basic elementary functionsTake the derivative using implicit and logarithmic differentiationFind tangent lines and be able to use them as linear approximationsFind critical values, local extrema and the intervals of concavity for differentiable functionsFind absolute extrema of constrained functionsSolve problems involving related ratesSolve basic optimization problemsUnderstand the Mean Value Theorem for DerivativesIntegrationUnderstand anti-derivatives and know the basic anti-derivative formulasHave an understanding of the Riemann Integral as a limit of Riemann sumsBe able to use both parts of the Fundamental TheoremEvaluate definite integrals using substitutionFind the area between two curves and the volumes of solids of revolutionFind arc lengths of plane curvesUnderstand the Mean Value Theorem for Integrals. Chapter 1 Optional. This is a pre-calculus review chapter and may be briefly discussed or assigned at the discretion of the instructor. Incoming students should be familiar with the topics in this chapter. Some faculty members have begun to require students to take a diagnostic test based on this first chapter but most instructors skip this chapter. Section 2.1 The Idea of Limits: The author employs the notions of tangents, average velocity and velocity to motivate the idea of a limit. Many students feel better about limits if they are given some sort of rationale for their study.Section 2.2 Definitions of Limits: This is the standard non-rigorous approach to limits. Most faculty members employ this sequential version of limits before giving the rigorous approach in Section 2.7. The students benefit from large numbers of examples, mainly graphical, but some numerical examples should be used as well.Section 2.3 Techniques for Computing Limits: The standard theorems on limits of sums, differences, products, etc. are stated in this section. The proofs of these theorems, if desired, must be deferred until the rigorous definition of limits is covered in Section 2.7.Section 2.4 Infinite Limits: This is a standard section.? Some students may be familiar with calculating vertical asymptotes from their algebra classes.? Section 2.5 Limits at Infinity: As in the previous section, the student may be familiar with the notion of horizontal asymptotes. The treatment is standard and seems to give students little trouble. Section 2.6 Continuity: Continuity is one of the most important ideas in the course.? The instructor should explore the topic in detail, so that confusion might be avoided later.? The students should be aware of continuity of the standard functions and how to combine them to make more complicated continuous functions. The students should be taught to evaluate limits of continuous functions with substitutions. Section 2.7 The Precise Definition of a Limit: The instructor should use their own discretion in this section. This material is more abstract than most in this course. If you are new to teaching you may wish to consult with some of your colleagues about this topic. When presented, it should be carefully and slowly explained. Sections 3.1 Introducing the Derivative: The author uses the standard tangent line motivation for the derivative and ties it very loosely to the notion of a rate of change. He moves quickly from the derivative at a point to the idea of the derivative function. The instructor may want to further explore the derivative as a velocity in this section because the author largely postpones the physical interpretations of the derivative until section 3.6.Section 3.2 Working with Derivatives: This section introduces some of the key ideas of graphing a function using a derivative, by considering the reverse issue of graphing a derivative based on a given function. The author also considers the relationship between differentiability and continuity in this section. Examples of non-differentiable functions are also discussed.Section 3.3 Rules of Differentiation: The material is standard. Derivatives of constants, the power rule, the linearity properties and higher order derivatives are covered. The author differentiates the natural exponential function by defining e as a limit. This is a non-rigorous but typical way to introduce the exponential function early.Section 3.4 The Product and Quotient Rules: The students benefit from numerous examples when teaching this material. Many students have trouble getting the numerator correct in the quotient rule. Starting with this section, students can improve their algebra skills by trying to simplify their answer to match the ones in the text. Section 3.5 Derivatives of Trigonometric Functions: This material is presented in the usual manner. Students can easily follow the proof of the limit for sin(x)/x and it is a useful exercise to go over. You may find some of your students have difficulty working with basic identities or solving trig equations.Section 3.6 Derivatives as Rates of Change: The author finally begins to firmly link the derivative with its physical interpretations. The instructor should have already made mention of this in prior lectures. The economics and business applications are usually omitted since the thrust of this class is towards the engineering and physics students. Section 3.7 The Chain Rule:? This topic is troublesome for the students. The problem begins with their algebra weakness with composition. Many have trouble differentiating composite functions because they do not really understand composition itself. The instructor will have to present a large number of examples in this section.Section 3.8 Implicit Differentiation:? The beginning instructor should be advised that this seemingly easy topic will present their students many challenges. Do not suspect that you will be able to breeze through this material and have your students master it quickly.? Remember, they don't quite understand the chain rule yet.Section 3.9 Derivatives of Logarithmic and Exponential Functions: The author uses implicit differentiation to derive the formula for derivatives of logarithms.? This section also incorporates logarithmic differentiation and the verification of the power rule for real numbers. Students will have difficulty in differentiating tower functions of the form f(x)^g(x).?Section 3.10 Derivatives of Inverse Trigonometric Functions: The material is presented in the standard manner but the students have a bit of trouble with these derivatives. The formulas are a bit more complicated and harder to memorize. The instructor should decide how much to tell the student about the inverse secant function and the two different interpretations of its negative branch. The section also includes the derivatives of general inverse functions.Section 3.11 Related Rates: This topic gives the students some trouble because they do not understand the chain rule. The two basic guidelines for related rate problems are: 1 – differentiate with respect to time and 2 – never substitute numerical values until you have differentiated. These two rules should help most students.Section 4.1 Maxima and Minima: Finding critical values seems to give students trouble. They can usually find the derivatives easily enough but solving the resulting equations is the part with which they struggle. Trigonometric examples are a must since many students have forgotten how to solve trigonometric equations.Section 4.2 What Derivatives Tell Us: This section begins with the increasing and decreasing test.? This is possibly the most important thing students can learn in calculus.? The first derivative test follows.? The author introduces the notion of concavity and its indication by the second derivative.? This section finishes off with the second derivative test.? This section takes more than one day to cover well. The algebra and trigonometry in this section can be intense.? A warning to the students might be appropriate.Section 4.3 Graphing Functions: This section summarizes graphing techniques.? Many of the problems involving trigonometric and exponential functions are challenging but should not be avoided. These problems will build the students manipulative skills. Section 4.4 Optimization Problems: The students will encounter some difficulty in this section.? Many will have forgotten geometry, needed for many of the optimization problems.? You should expect to spend more than one day on this section.Section 4.5 Linear Approximation and Differentials: This section revisits the tangent line and refers to the linearization of functions. The instructor may wish to mention this is the best first degree polynomial approximation for a function. The student should understand the geometric interpretations of dy and Δy.Section 4.6 Mean Value Theorem: This section includes Rolle's Theorem and the Mean Value Theorem.? The MVT is a building block for the proofs of many other theorems and should be carefully presented.Section 4.7 L'Hospital's Rule: This is a fairly standard presentation. Some instructors spend two days on this section.Section 4.8 Newton’s Method *Optional*: This method of finding roots, while not robust, does offer the students reinforcements of the geometric interpretation of the derivative and the ideas of convergence. Demonstrations of cases where Newton’s Method fails to converge should be presented.Section 4.9 Antiderivatives: A standard presentation that is routinely grouped with the Chapter 5 material by many instructors. Section 5.1 Approximating Areas under Curves: This section motivates the formal definition of the Riemann Integral in Section 5.2. This material is important, as it establishes the presence of sigma notation and left and right hand sums and midpoint rule approximations.? The author also uses distance traveled over time to further motivate Riemann Sums.Section 5.2 Definite Integrals: The Definite Integral: The instructor should carefully develop the definition of the Riemann Integral. This section also includes many of the basic properties of the definite integral. The instructor should try to ground much of this section in geometric terms.? The author introduces the notion of net area in this section.Section 5.3 The Fundamental Theorem of Calculus: The author introduces the idea of area functions.? The student will not have seen these before.? The proof of the FTC is necessary for every calculus class.? Spend enough time in class to do it right.? Differentiation of the area function is harder for the students to remember than the integral evaluation result.Section 5.4 Working with Integrals: This section presents the symmetry rules for integrals, along with the average value of a function and the mean value theorem for derivatives. These topics present the student with little difficulty.Section 5.5 The Substitution Rule: Students have trouble with this topic.? Since the idea of substitution is so important in Calculus II, the instructor should be very sure that his students receive adequate practice in this topic.? The instructor should stress the need to change the limits of integration when evaluating a definite integral using substitution. You might seek out more problems from other sources to augment those in the book.Section 6.1 Velocity and Net Change: The author discusses displacement and total distance traveled as integrals.? The students will have trouble with total distance traveled because of the absolute value being applied to velocity. This section also has simple differential equation problems involving construction of position functions from velocity or acceleration functions. Section 6.2 Regions Between Curves: This is a fairly standard presentation. Be sure to demonstrate some problems involving integration with respect to y.Section 6.3 Volume by Slicing: Many students have a great deal of difficulty with volume problems. The instructor should illustrate the examples with pictures (to the best of their ability). Be advised that even with marvelously drawn pictures the volumes by slicing problems represent some of the most challenging problems in Calculus I. The students do not “see” well in three dimensions. The instructor should be careful when assigning homework, as some of these slicing problems are difficult for the beginning student. In addition to slicing problems, this section introduces volumes of solids of revolution using washers and disks.? Remind the students that Riemann Rectangles rotated around an axis perpendicular to the rectangle form disks or washers.Section 6.4 Volume by Shells: Similar to the above, many illustrations may make this topic easier for your students.? Remind the students that when a Riemann Rectangle is rotated around an axis parallel to the rectangle a shell is formed.Section 6.5 Length of Curves: Be advised that many of the integrals associated with arc length are too difficult for the students and many are simply non-elementary. The safest thing to do is to prepare your examples to be worked out beforehand and give most examples as “Set-up” the integral type problems. Section 6.6 Surface Area *Optional*: This topic is often covered by instructors but it is listed as optional. Some of these integrals will be too difficult for the students. The revolutions about the y axis should also be discussed. Gabriel's horn, while it is an improper integral is an interesting example with which to tease the students.Section 6.7 Physical Applications *Optional*: These standard physic topics may actually take two days to cover.? The students have more trouble with the fluid pumping problems than with the other problems in this section.? Be careful with the units and be sure to explain the difference between weight density and mass density if you intend on doing things in the English system. Section 6.10 Hyperbolic Functions: The hyperbolic functions will be new to most students. The instructor should cover these as they provide further basic functions for examples and interesting limit problems. Inverse hyperbolic functions should be considered optional. ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download