Quick Installation Guide

[Pages:14]Quick Installation Guide

POE Outdoor Bullet IP Camera Model: B-xE Series

Shenzhen Dericam Technology Co., Ltd.

Quick Start Guide-V 1.0.2

Package Contents

POE Outdoor Bullet IP Camera

x1

Power Adapter DC 12V

x1

Mounting Bracket

x1

Ethernet Cable

x1

Quick Installation Guide

x1

Warranty Card

x1

CD-ROM

x1

Physical Description



1 Tech support email support@

Shenzhen Dericam Technology Co., Ltd.

Quick Start Guide-V 1.0.2

Start Installation of the Camera

You can install the camera on a smartphone/tablet (Android or iOS) as our priority recommendation, or on a PC (Windows or Mac OS). Please refer to the guide for smartphone/tablet installation on page 3, or PC installation on page 9 after completing first step on hardware installation.

1. Hardware installation

1.1 For working at POE mode, only need to connect the Ethernet & POE port with a POE Switch via an Ethernet cable for power up and network connection.

1.2 If there is no POE Switch, connect the camera's DC socket with the power adapter for power up, and connect its Ethernet & POE port directly with your router via an Ethernet cable.

Ethernet & POE Port



1 Or

LAN Port

Router or Switch (Please power up the camera by

DC power adapter firstly.)

2

POE Switch

2 Tech support email support@

Shenzhen Dericam Technology Co., Ltd.

Quick Start Guide-V 1.0.2

Notes, the B1E is not Wi-Fi supported.

2. Smartphone/Tablet Installation

This camera can only connect to 2.4 GHz Wi-Fi networks, so please ensure that your phone is connected to a compatible network, if the router is dual-band.

2.1 Download and Install Dericam App.

Search "Dericam" on App Store/Google Play, or scan the QR code to download Dericam App and install it on your phone/tablet.

Scan the left QR code to directly download the iOS App from App Store



3 Tech support email support@

Shenzhen Dericam Technology Co., Ltd.

Quick Start Guide-V 1.0.2

Scan the left QR code to directly download the Android App from Google Play

2.2 Add Camera to Your Phone and Login the Camera.

Run the Dericam App on phone. Click "Add Camera". -If it is for the first installation, go to "Setup a new camera" then click "Next" (Step 1). -If the camera has been added successfully before, go to "Setup an existing camera". Click "Scan for your camera" (Step 2). The camera on the LAN will be found and listed with UID code and IP address.



4 Tech support email support@

Shenzhen Dericam Technology Co., Ltd.

Quick Start Guide-V 1.0.2

Select your camera by clicking the UID code displayed on the list (Step 3) for going to the interface of camera information (Step 4). Give a name for your camera, and



5 Tech support email support@

Shenzhen Dericam Technology Co., Ltd.

Quick Start Guide-V 1.0.2

enter the username and password (Both are "admin" for factory default setting). Then click "Next".

Notes: The password is case sensitive.

2.3 Change the default Password of the Camera

For security, it is required to change new password. It is not



6 Tech support email support@

Shenzhen Dericam Technology Co., Ltd.

Quick Start Guide-V 1.0.2

available to change username in App on phone but you can change it after login on computer.

Note, the username is still "admin".

Ignore the prompt about Wi-Fi setup and click "No" or

"Done" to finish setup because this POE camera does

not support wireless connection.



7 Tech support email support@

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download