2019 PRODUCT CATALOG - ITW BUILDEX

2019 PRODUCT CATALOG

2

SELECTOR GUIDE

APPLICATION AND PRODUCT

4 LIGHT DUTY STEEL-TO-STEEL APPLICATIONS

? #8, #10, and 1/4 diameter Teks 1, 2, and 3 drill points ? Hex head

6 MEDIUM DUTY STEEL-TO-STEEL APPLICATIONS

? #12 and 1/4 diameter Teks 2 and 3 drill points ? Hex head

8 HEAVY DUTY STEEL-TO-STEEL APPLICATIONS

? #12, and 1/4 diameter Teks 4, 4.5, and 5 drill points ? Hex head

10 ATTACHING SIMILAR OR DISSIMILAR METAL APPLICATIONS

? #10, #12 and 1/4" diameter Teks 3 and 4 points ? Hex head

12 LOW PROFILE ARCHITECTURAL APPLICATIONS

? #10 and #12 diameter Teks 3 and Type AB points ? Pancake and Hex heads

14 WOOD-TO-METAL APPLICATIONS

? #10, #12, and 1/4 diameter Teks 3 and 4 drill points ? Wafer, Phillips flat, and Phillips Square-Driv? heads

16 METAL ROOF AND WALL APPLICATIONS

? #10, #12, and 1/4 diameter Teks 1, 2, 3, 4, 4.5 and 5 drill points ? Hex with bonded washer

18 PREMIUM METAL ROOF/WALL APPLICATIONS

? #10, #12, and 1/4 diameter Teks 1, 2, 3, and 5 drill points ? 1/4 and #17 diameter Type AB sharp point ? Maxiseal? integral washer system

20 LONG LIFE METAL ROOF AND WALL APPLICATIONS

? #12 and 1/4 diameter Teks 1, 2, 3, and 5 drill points ? 1/4 and #17 diameter Type AB sharp point ? Scots? 300SS encapsulated head with Maxiseal integral washer system

SELECTOR GUIDE

22 HIGH TORQUE ZINC DIE CAST

? #12 and 1/4 diameter Teks? 1 and 2 drill points ? Maxiseal? integral washer system ? Zinc aluminum alloy

24 METAL-TO-WOOD APPLICATIONS

? #9 and #12 diameter, gimlet point #10 and #14 diameter Hi-Lo Type 17 point TrugripTM ? Hex with or without bonded washer

26 POST FRAME APPLICATIONS

? #10 Hi-Lo Type 17 point Scots Trugrip

28 PIPE FLASHING APPLICATIONS

? Dektite? and Retrofit Dektite? ? EPDM and silicone for 1/4" to 13" pipes

30 METAL ROOF END CAP FLASHING APPLICATIONS

? Dek-CapTM standing seam roof end cap flashing

32 DRYWALL ANCHOR APPLICATIONS

? E-Z Ancor?, Stud SolverTM, Plastic PlusTM, E-Z ToggleTM, E-Z LiteTM, Twist-N-LockTM

34 CEMENT BOARD APPLICATIONS

? Hi-Lo? and S-12? Rock-OnTM screws ? Countersinking wafer head

36 EXTERIOR WOOD APPLICATIONS

? #6, #7, #8, and #10 diameter Dec-KingTM screws

Teks? Fastener Features

Head Proper head style choice will ensure stability during driving, proper clamping and desired finished appearance.

Thread Form and Diameter The correct choice of thread form and diameter optimizes low installation torque with high pullout strength.

Head Threads

Pilot Section

(When Necessary)

Flute Point

Pilot Section The unthreaded portion of the point assures that the drilling of the steel is completed before the threads begin tapping into the drilled hole.

Point The point is designed to efficiently remove material and precisely size the hole for the thread.

Finish: Platings and coatings provide lubricity during drilling and tapping as well as corrosion resistance.

FASTENER DESCRIPTION AND BREAKDOWN EXAMPLE

10

-

Nominal Screw Size

16

x

Threads Per Inch

3/4"

Screw Length

HWH

Head Style

TEKS/3

Drill Point Type

NOMINAL SCREW SIZES

ThreadDecimal DiameterEquivalent

#6

.140

#7

.150

#8

.160

#9

.180

#10

.190

#11

.200

#12

.210

#13

.230

#14

.240

1/4

.250

#17

.286

STEEL GAUGE CHART

Common Sheet Steel

Gauges

30

Decimal Eq.

InchesMM .012 .30

28

.015 .38

26

.018 .45

24

.024 .61

22

.030 .76

20

.036 .91

18

.048 1.21

16

.060 1.52

14

.075 1.90

12

.105 2.65

1/8

.125 3.18

10

.134 3.42

3/16 .187 4.77

1/4

.250 6.36

1/2

.500 12.72

MATERIAL THICKNESS (INCHES)

DRILL AND TAP MATERIAL THICKNESS CHART

.500 .400

12.72mm12.72mm

.500 .500

9.51mm

.375

6.36mm 6.36mm

.300 .200

5.3mm

.210

4.17mm

.175

5.3mm

.210

5.3mm

.210

.250

.250

.100

2.4mm

.095

2.4mm

.095

2.4mm

.095

2.50mm

.100

.125 .125 .125 .125 .125

3.18mm 3.18mm 3.18mm 3.18mm 3.18mm

.030

.018

.036 .036 .036 .036 .036

.0 .018 .45mm .018 .91mm .91mm .91mm .91mm .91mm

.45mm

.45mm

Screw Size

Point #10

#12

1/4

#8 #12 #10 #12 1/4 #12 1/4 #12 #12

1/4

Teks/1

Teks/2

Teks/3

Teks/4 Teks/4.5 Teks/5

*Drill & tap capacities may vary with special feature designs. Refer to product reports for specifics.

Warranty Information Proper fastener connection design takes into account where and how fasteners are used. Allowance for special characteristics in materials, differences in types of materials being joined, unique or unusual environmental service or installation conditions, and the safety factors required by anticipating normal or short term loading conditions must be considered. Due to possible differences in specifications, applications and interpretation of results, purchasers and specifiers must make their own evaluation of the products, to determine the suitability of these products for intended use. All warranties of Buildex products, expressed or implied, including the warranties of mechanability and fitness for particular purposes are specifically excluded except for the following: Buildex will repair or replace any product which, within twelve months afer sale by Buildex or its distributors, is found by Buildex to be defective in material or workmanship -- normal wear and tear expected. This is the sole warranty of Buildex and the sole remedy available to distributor or buyer. Buildex shall not be liable for any inuury, loss or damage, direct, indirect, incidental or consequential, arising out of the use of, or the inability to use, any Buildex product.

3

Light Duty Steel - To - Steel Applications

TEKS?

Self-Drilling Fasteners

Preferred most by electrical, decking, HVAC and metal building contractors.

1/4-14 x 7/8 Teks 1 Available

with ABOTTM

(Anti-Backout Threadform)

Applications

Stitch roof deck and wall panel sidelaps.

HVAC, electrical trim accessories to steel framing.

Residential steel frame construction.

Product Features

Sharp convex drill point has precise cutting edges to improve drill performance with less effort.

Non-walking point provides fast material engagement.

Unique point to thread design extrudes the metal preventing stripout.

Product Specifications

Diameter.....................#8, #10, and 1/4 Thread Form...............8-18

10-16, 10-24 1/4-14 Head Style..................#8: 1/4" HWH #10: 5/16'' HWH #10: 5/16'' HWH with Serrations #2 Phillips Pan #12: 5/16'' HWH 1/4: 5/16'' HWH Drill Point....................Teks 1 Teks 2 Teks 3 Finish...........................#8 & #10, Electro-zinc

#10 and 1/4, Climaseal

Brick ties to steel framing. Track to stud and stud splicing. Hat channel to stud.

Point to thread design maximizes pullout performance and minimizes backout. Four head styles available to handle various applications. Climaseal? finish provides excellent corrosion resistance and lower tapping torque.

Head Styles

Hex Washer Hex

Hex Washer Hex with Serrations

Approvals and Listings

Factory Mutual (3050495), ICC ESR-3270, ICC ESR-1976

4

TEKS? Self-Drilling Fasteners

Selector Guide

Part Number

1196200

Description 8-18 x1/2''

Head Style

HWH

1107053

10-16 x 3/4'' HWH

1399053

1/4-14 x 7/8'' HWH

1397000

10-16 x 1/2" HWH

1127000

10-16 x5/8" HWH

1128000

10-16 x 3/4" HWH

1129000

10-16 x1" HWH

1130000

10-16 x1-1/4" HWH

1131000

10-16 x1-1/2" HWH

1550000

10-24 x 3/4'' HWH

1786200

10-24 x 5/8'' *HWH

1821200

10-16 x 3/4'' *HWH

* With serrations under head

Electro-zinc finish

Drill Point

#2

#1 #1 #3 #3 #3 #3 #3 #3 #3 #2 #3

Drill & Tap Capacity .036-.100

.018-.095 .018-.095 .036-.175 .036-.175 .036-.175 .036-.175 .036-.175 .036-.175 .036-.175 .036-.175 .036-.175

Max. Material Box Attachments Qty

.205 10,000

.220 .380 .150 .200 .325 .575 .825 1.075 .323 .200 .323

5,000 5,000 5,000 5,000 5,000 5,000 4,000 3,000 5,000 5,000 5,000

Applications ? HVAC, electrical trim accssories

to steel framing ? Stitching roof deck, wall panel

sidelaps or duct work

? Clips, duct straps, brick ties or accessories to steel framing

? Vibration resistance; HVAC Applications.

Performance Data

Fastener

Dia. Pt.

#8 2

#10-16

1

3

#12 1

1/4 1

PULLOUT VALUES (average lbs. ultimate)

Steel Gauge 26 24 22 20 18 16 14 12 119 193 265 298 491 703 959 ? 148 241 311 357 565 826 1111 1796 124 208 266 299 499 708 967 1474 159 261 338 390 649 908 1259 1949 208 329 428 562 800 1151 ? ?

Fastener (dia-tpi)

8-18 10-16 10-24 12-14 1/4-14

FASTENER VALUES

Tensile

Shear

(lbs. min.) (avg. lbs. ult.)

1545

1000

1936

1400

2702

1500

2778

2000

4060

2600

Torque (min. in. lbs.)

42 61 65 92 150

SHEET STEEL GAUGES

Gauge No.

26 24 22 20 18 16 14 12

Decimal Equivalent .018'' .024'' .030'' .036'' .048'' .060'' .075'' .105''

The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design purposes.

SHEAR VALUES (average lbs. ultimate)

Fastener

Dia. Pt. #8 2 #10 1

3 #12 1 1/4 1

Steel Gauge (lapped)

26 24 22 20 18 16 14 294 496 560 740 1060 ? ? 398 584 659 884 1374 ? 552 ? 455 526 728 1266 1540 ? 432 703 753 1018 1452 ? ? 511 849 885 1244 1764 ? ?

Installation Guidelines

A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screwgun should be a minimum of 4 amps and have a RPM range of 0-2500.

Adjust the screwgun nosepiece to properly seat the fastener.

New magnetic sockets must be correctly set before use. Remove chip build-up as needed.

The fastener is fully seated when the head is flush with the work surface.

Overdriving may result in torsional failure of the fastener or stripout of the substrate.

The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

700 High Grove Blvd Glendale Heights, Illinois 60139 800-848-5611 Fax: 630-595-3549

Teks? and Climaseal? are trademarks of ITWBuildex and Illinois Tool Works, Inc. Teks? and Climaseal? are trademarks of Illinois Tool Works, Inc.

? 2015 ITWBuildex and Illinois Tool Works, Inc. ? 2019 Illinois Tool Works, Inc.

5

Medium Duty Steel - To - Steel Applications

?

TEKS?

Self-Drilling Fasteners

The best point ever for speed and consistency ... optimum for medium duty steel-to-steel applications.

Applications

Roof deck to steel framing. Wall panel to girt. Duct work to steel framing. Accessories to steel framing

Product Features

Point has precise cutting edges to improve drill performance with less effort.

Non-walking point provides fast material engagement.

Point to thread design maximizes pullout performance and minimizes backout.

Product Specifications

Diameter......................#12, 1/4

Thread Form................12-14

1/4-14

Head Style...................#12: 5/16'' HWH

1/4: 3/8'' HWH

1/4 Overhead Door Fasteners

7/16'' HWH with Serrations

Drill Point.....................Teks 2

Teks 3

Finish............................Climaseal

Roof clip to steel framing. Retrofit framing. Commercial overhead steel doors, hinges & latches.

Drills and taps in the broadest range of applications. Climaseal? finish provides excellent corrosion resistance and lower tapping torque.

Head Style

Hex Washer Head

Hex Washer Head with Serrations

Approvals and Listings

Factory Mutual (3050495), ICC ESR-3270, ICC ESR-1976

6

TEKS? Self-Drilling Fasteners

Selector Guide

Part Number

1134000 1136000 1120000 1123000 1140000 1553000 1143000 1146000 1147000 1149000 1150000 1152000 1155000 1554000 1157000 1304000

1587000

Description

Head Drill Drill & Tap Max. Material Box Style Point Capacity Attachment Qty

12-14 x 3/4'' HWH

12-14 x 1''

HWH

12-14 x 1-1/4'' HWH

12-14 x 1-1/2'' HWH

12-14 x 2''

HWH

12-14 X 2-1/2'' HWH

12-14 x 3''

HWH

12-14 x 4''

HWH

1/4-14 x 3/4'' HWH

1/4-14 x 1'' HWH

1/4-14 x 1-1/4'' HWH

1/4-14 x 1-1/2'' HWH

1/4-14 x 2'' HWH

1/4-14 x 2-1/2'' HWH

1/4-14 x 3'' HWH

1/4-14 x 4'' HWH

#3 .036-.210 #3 .036-.210 #2 .036-.210 #2 .036-.210 #3 .036-.210 #3 .036-.210 #3 .036-.210 #3 .036-.210 #3 .036-.210 #3 .036-.210 #3 .036-.210 #3 .036-.210 #3 .036-.210 #3 .036-.210 #3 .036-.210 #3 .036-.210

.270 .520 .550 .800 1.450 1.950 2.450 3.450 .210 .400 .650 .900 1.400 1.900 2.400 3.400

5,000 4,000 4,000 2,500 2,000 1,000 1,000

500 3,000 2,500 2,000 2,000 1,500 1,000 1,000

500

1/4-14 x 1''

*HWH #3 .036-.210

.500

2,500

* 7/16" Across Flats HWH with serrations under head.

Applications ? Roof deck to steel framing ? Wall panel to girt ? Duct work to steel framing ? Accessories to steel framing ? Clip to steel framing ? Retrofit framing

? Commercial overhead steel doors, hinges & latches.

Performance Data

Fastener Dia. Pt. 12 2

3 1/4 3

PULLOUT VALUES (average lbs. ultimate) Steel Gauge

26 24 22 20 18 16 14 12 3/16 156 243 283 375 605 848 1181 1856 3520 142 211 289 341 551 757 1063 1631 2998 141 231 293 346 613 880 1145 1858 4550

Fastener Dia. Pt.

12 2 3

1/4 3

SHEAR VALUES (average lbs. ultimate)

Steel Gauge (lapped)

26 24 22 20 18 16 14 12

365 600 623 898 1370 1758 2138 2202

-

-

- 769 1358 1620 1970 1986

-

-

- 930 1442 2100 2584 2650

Fastener (dia-tpi)

FASTENER VALUES

Tensile (lbs. min.)

Shear (avg. lbs. ult.)

Torque (min. in. lbs.)

Gauge No.

SHEET STEEL GAUGES 26 24 22 20 18 16 14 12

12-14

2778

2000

92

Decimal Equivalent .018'' .024'' .030'' .036'' .048'' .060'' .075'' .105''

1/4-14

4060

2600

150

The values listed are ultimate averages achieved under laboratory conditions and apply to Buildex manufactured fasteners only. Appropriate safety factors should be applied to these values for design purposes.

Installation Guidelines

A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have an RPM range of 0-2500.

Adjust the screwgun nosepiece to properly seat the fastener.

New magnetic sockets must be correctly set before use. Remove chip build-up as needed.

The fastener is fully seated when the head is flush with the work surface.

Overdriving may result in torsional failure of the fastener or stripout of the substrate.

The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

700 High Grove Blvd Glendale Heights, Illinois 60139 800-848-5611 Fax: 630-595-3549

Teks? and Climaseal? are trademarks of ITWBuildex and Illinois Tool Works, Inc. Teks? and Climaseal? are trademarks of Illinois Tool Works, Inc.

? 2015 ITWBuildex and Illinois Tool Works, Inc. ? 2019 Illinois Tool Works, Inc.

7

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download