Shown on vehicle with floating caliper
AR33.25-P-0400GH
Removing and installing steering knuckle
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175
Shown on vehicle with floating caliper
10.3.97
P33.25-0245-06
Remove/Install
Notes on self-locking nuts and bolts
All models
AH00.00-N-0001-01A
1
Remove front wheels
Remove/install wheels, rotate if necessary
AP40.10-P-4050GH
2
Detach collar nut (65a) from front axle shaft
Installation: Replace collar nut (65a)
*BA33.30-P-1001-02B
3
Unclip cables for speed sensor and brake
Installation: Pay attention to correct line
lining wear indicator from guides
routing.
4
Remove brake disc
Model 163.113 up to VIN A289564,
AR42.10-P-0220GH
X754619, model 163.154 up to VIN
A289564, 163.136, models 163.154 /157 with
USA version, code 494a
Model 163.113 as of VIN A289565,
AR42.10-P-0220GI
X754620, model 163.154 as of FIN A289565,
163.128 /172 /174 /175, models 163.154
/157 except USA version, code 494a
5
Remove rpm sensor with bracket from
steering knuckle
AR42.30-P-0712GH
6
Detach tie rod (10) from steering knuckle
Check rubber boot and ball joint for wear AR46.40-P-0200-02C
and damage.
*BA46.40-P-1001-01C
Thrust piece Puller
*140589006300 *202589023300
7
Press out follower joint from upper transverse Check rubber boot and ball joint for wear AR33.20-P-0500-01GH
control arm (6) using puller
and damage.
*BA33.20-P-1001-01D
Thrust piece Support Press
*129589106300 *163589014300 *163589034300
8
Press front axle shaft out of front axle shaft
AR33.30-P-0620-04GH
flange
Extraction and insertion tool
*210589034300
Copyright Daimler AG 3/26/09 G/01/08. This WIS printout will not be recorded by the update service.
Page 1
9
Press supporting joint off lower wishbone
10
Remove steering knuckle (5) forwards
Check
11
Check supporting joint
Inspect front axle joint for play, inspect
rubber boots
12
Install in the reverse order
13.1
Perform chassis alignment check
Wheel location, hub
Number
Designation
Secure steering knuckle to prevent it from falling down, in order to rule out damage to the steering knuckle
AR33.20-P-0440-02GH
Check rubber boot and ball joint for wear and damage.
*BA33.20-P-1002-01D
Thrust piece
*140589006300
After installation of new parts.
Model 163
AP33.20-P-3353GH AR40.20-P-0200GH
BA33.20-P-1001-01D BA33.20-P-1002-01D
Self-locking nut, upper wishbone follower joint to steering knuckle
Nm 50
Self-locking nut, supporting joint to steering Nm 85 knuckle
Front axle shaft Number
Designation
BA33.30-P-1001-02B
Nut, front axle shaft to front axle shaft flange
Model 163
Nm 490
Track rod Number
BA46.40-P-1001-01C
Designation
Model 163
Self-locking nut, tie rod to steering knuckle Nm 55
140 589 00 63 00
Thrust piece
202 589 02 33 00
Puller
129 589 10 63 00
Thrust piece
163 589 01 43 00
Support
163 589 03 43 00
Press
210 589 03 43 00
Extraction and installation tool
Copyright Daimler AG 3/26/09 G/01/08. This WIS printout will not be recorded by the update service.
Page 2
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- int ii servicemanual v1 2 silly little cars
- design and analysis of a professional go kart steering system
- clamp cylinder with lock series clk1 smc pneumatics
- safety recall code 40q7
- revised 6 6 14 installation instructions
- shown on vehicle with floating caliper
- home exercise program for common
- modeling and analysis of cotter joint ijert
- when fingers lock diagnosing treating trigger finger
- case systems inc
Related searches
- buying a vehicle with cash
- impact on learning with technology
- buy a vehicle with bad credit
- refinancing vehicle with bad credit
- price on viagra with prescription
- play on words with names
- finance vehicle with bad credit
- articles on students with disabilities
- hands on programming with r pdf
- insurance rates based on vehicle manufacturer
- exercises on tenses with answers
- hymns on youtube with lyrics