Victorian Purchasing Guide for FPI11 Forest and Forest ...



Victorian Purchasing GuideforFPI11 Forest and Forest Products Version No 1October 2012 INCLUDEPICTURE "" \* MERGEFORMATINET INCLUDEPICTURE "" \* MERGEFORMATINET INCLUDEPICTURE "" \* MERGEFORMATINET ? State of Victoria (Department of Education and Early Childhood Development) 2012.Copyright of this material is reserved to the Crown in the right of the State of Victoria. This work is licensed under a Creative Commons Attribution-NoDerivs 3.0 Australia licence (). You are free use, copy and distribute to anyone in its original form as long as you attribute Skills Victoria, Department of Education and Early Childhood Development as the author, and you license any derivative work you make available under the same licence.DisclaimerIn compiling the information contained in and accessed through this resource, the Department of Education and Early Childhood Development (DEECD) has used its best endeavours to ensure that the information is correct and current at the time of publication but takes no responsibility for any error, omission or defect therein.To the extent permitted by law DEECD, its employees, agents and consultants exclude all liability for any loss or damage (including indirect, special or consequential loss or damage) arising from the use of, or reliance on the information contained herein, whether caused or not by any negligent act or omission. If any law prohibits the exclusion of such liability, DEECD limits its liability to the extent permitted by law, for the resupply of the information.Third party sitesThis resource may contain links to third party websites and resources. DEECD is not responsible for the condition or content of these sites or resources as they are not under its control.Third party material linked from this resource is subject to the copyright conditions of the third party. Users will need to consult the copyright notice of the third party sites for conditions of usage.Victorian Purchasing Guide Version HistoryTraining Package Version Date VPGApprovedCommentsFPI11 V11 October 2012This Victorian Purchasing Guide FPI11 V1 replaces FPI05 Forest and Forest Products Training Package. All qualification codes have been updated.It contains nine revised qualifications, fourteen new units of competency and one revised unit of competency. FPI05 V3 16 May 2012This Victorian Purchasing guide is an amalgamation of Version 3 and Version 2.1 and reflects the changes to the FPI05 Forest and Forest Products Training Package Version 3 which replaces FPI05 Forest and Forest Products Training Package Version 2. It has one new qualification:FPI60111 Advance Diploma of Forest Industry SustainabilitySeven revised qualifications plus new and revised units of competency.2.1Update of units:Minor changes to the following units of competency and a code change from A to B: The following qualification contains minor text editing:FPI30910 Certificate III in Timber Truss and Frame Design and ManufactureVersion 219 August 2011This Purchasing Guide reflects the changes to the FPI05 Forestry and Forest Products Training Package Version 2 which replaces FPI05 Forest and Forest Products Training Package Version 1.It has six new qualifications, minor changes to some units of competency, additional imported units and minor change to the packaging rules of Certificate I in Forest and Forest Products. FPI11 Forest and Forest Products Training Package Victorian Purchasing GuideCONTENTS TOC \t "Head1,1,Head2,2" INTRODUCTION PAGEREF _Toc310409783 \h 5What is a Victorian Purchasing Guide? PAGEREF _Toc310409784 \h 5Registration PAGEREF _Toc310409785 \h 5QUALIFICATIONS PAGEREF _Toc310409786 \h 6UNITS OF COMPETENCY AND NOMINAL HOURS PAGEREF _Toc310409787 \h 8SAMPLE TRAINING PROGRAMS PAGEREF _Toc310409788 \h 17CONTACTS AND LINKS PAGEREF _Toc310409789 \h 17GLOSSARY PAGEREF _Toc310409790 \h 42INTRODUCTIONWhat is a Victorian Purchasing Guide?The Victorian Purchasing Guide provides information for use by Registered Training Organisations (RTOs) in the provision of Victorian government subsidised training.Specifically the Victorian Purchasing Guide provides the following information related to the delivery of nationally endorsed Training Packages in Victoria:The nominal hour range (minimum-maximum) available for each qualification.Nominal hours for each unit of competency within the Training Package.Sample Training ProgramsRegistrationRTOs must be registered by either the Victorian Registration and Qualifications Authority (VRQA) or the Australian Skills Qualification Authority (ASQA) regulatory body to be eligible to issue qualifications and statements of attainment under the Australian Quality Framework (AQF).The VRQA is the regulatory authority for Victoria that registers VET training organisations who provide courses to domestic students only and who only offer training in Victoria.To register to provide training to international students and in other Australian states and territories you will need to apply with ASQA. QUALIFICATIONSCodeTitleQualification Nominal Hour Range MinimumMaximumFPI10111 Certificate I in Forest and Forest Products195225FPI20111 Certificate II in Forest Growing and Management343553FPI20211 Certificate II in Harvesting and Haulage343563FPI20311Certificate II in Sawmilling and Processing290515FPI20411Certificate II in Wood Panel Products280475FPI20511Certificate II in Timber Manufactured Products330505FPI20611Certificate II in Timber Merchandising350445FPI20711Certificate II in Timber Truss and Frame Design and Manufacture298475FPI30111Certificate III in Forest Growing and Management5131113FPI30211Certificate III in Harvesting and Haulage8431333FPI30311 Certificate III in Sawmilling and Processing455805FPI30411Certificate III in Wood Panel Products425695FPI30511Certificate III in Timber Manufactured Products363635FPI30611Certificate III in Timber Merchandising420545FPI30711Certificate III in Sawdoctoring8701030FPI30811Certificate III in Woodmachining8501010FPI30911Certificate III in Timber Truss and Frame Design and Manufacture413735FPI40111Certificate IV in Forest Operations8401230FPI40211Certificate IV in Timber Processing605900FPI40311Certificate IV in Timber Truss and Frame Manufacture5721360FPI40411Certificate IV in Timber Truss and Frame Design*7161300FPI50111Diploma of Forest and Forest Products10201710FPI50311Diploma of Timber Truss and Frame Manufacture9421672FPI50411Diploma of Timber Truss and Frame Design11821538FPI60111Advanced Diploma of Forest Industry Sustainability10401480Nominal hour range for qualification includes the units in the qualification and their prerequisites (where the prerequisites can be accommodated within the qualification packaging rules)In addition, some qualifications have an entry requirement of specified units or their equivalent. These units have a nominal hour value that is not included in the nominal hours as they are outside the qualification packaging rules.UNITS OF COMPETENCY AND NOMINAL HOURSRTOs are advised that there is a mapping inside the Training Package that describes the relationship between new units and superseded or replaced units from the previous version of FPI05 Forest and Forest Products Training Package. Information regarding transition arrangements can be obtained from the state or national VET Regulating Authority (see Contacts and Links section).You must be sure that all training and assessment leading to qualifications or Statements of Attainment from the FPI11 Forest and Forest Products Training Package is conducted against the Training Package units of competency and complies with the requirements in the assessment guidelines.Listing of the Units of Competency and Nominal HoursUnit CodeUnit TitleNominal HoursFPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR2203BFollow environmental care procedures30FPICOR2204BFollow fire prevention procedures20FPICOR2205BFollow OHS policies and procedures30FPICOR2207BMaintain quality and product care20FPICOR3201BImplement safety, health and environment policies and procedures80FPICOR3202BConduct quality and product care procedures20FPICOR3203BEvaluate fire potential and prevention40FPICOR3204BVisually assess materials20FPICOR4201BMonitor safety, health and environment policies and procedures80FPICOR4202BMonitor and review forestry operations80FPICOR4203BMonitor quality and product care procedures80FPICOR6201AManage sustainability in the workplace120FPICOR6202AImplement practices to maximise value from wood residues80FPICOT2201BStack and bind material15FPICOT2202BRack material15FPICOT2203BFinish products30FPICOT2205BTail out materials15FPICOT2207BDress boards and timber50FPICOT2208BResaw boards and timber20FPICOT2209BProduce finger jointed timber20FPICOT2210BTally material10FPICOT2211BProduce pointed timber products20FPICOT2212BGrade hardwood sawn and milled products20FPICOT2213BGrade softwood sawn and milled products20FPICOT2214BGrade cypress sawn and milled products20FPICOT2215BVisually stress grade hardwood20FPICOT2216BVisually stress grade softwood20FPICOT2217BVisually stress grade cypress20FPICOT2218BCross-cut materials with a fixed saw25FPICOT2219BUse hand-held tools20FPICOT2220BSelect trees for tending operations20FPICOT2222BProduce laminated beams40FPICOT2223BSegregate and sort logs20FPICOT2224BBand edges of panels10FPICOT2225BChip or flake wood40FPICOT2226BDebark logs mechanically20FPICOT2227BProcess orders and despatch products30FPICOT2228BStore materials20FPICOT2229BDock material to length25FPICOT2230BAssemble products40FPICOT2231BPack products30FPICOT2232BCut material to shape using a saw20FPICOT2233BNavigate in forest areas40FPICOT2235AAssess timber for manufacturing potential20FPICOT2236Fall trees manually (Basic)80FPICOT2237AMaintain chainsaws20FPICOT2238ACut materials with a hand-held chainsaw40FPICOT2239ATrim and cut felled trees40FPICOT2240Cut material with a pole saw20FPICOT3201BHand sharpen knives and blades20FPICOT3202BNavigate in remote or trackless areas80FPICOT3203BWeigh loads20FPICOT3204BPrepare and interpret sketches and drawings30FPICOT3205BDress boards using multi-headed machines40FPICOT3206BCut material using high speed optimiser35FPICOT3207BSet up, operate and maintain finger jointing operations40FPICOT3208BTest strength of joints25FPICOT3209BSet up, operate and maintain end matching operations30FPICOT3210BSharpen cutting tools20FPICOT3211BMaintain sawdoctoring tools30FPICOT3212BReplace saws, blades and guides40FPICOT3213BManufacture cutting tools40FPICOT3214BTake off material quantities30FPICOT3215BSwage and shape saw blades40FPICOT3216BAssess and maintain saw performance40FPICOT3217BAssess and maintain cutter performance40FPICOT3218BQuote and interpret from manufactured timber product plans50FPICOT3219BProduce standard truss or frame plans and details using computers50FPICOT3220BQuote and interpret from computerised timber manufactured product plans50FPICOT3221BRehabilitate tracks, quarries and landings80FPICOT3222BPresent forestry information and interpretations programs80FPICOT3223BGrade and mark logs40FPICOT3224BPlan and monitor equipment maintenance40FPICOT3225BMechanically stress grade timber30FPICOT3226BShift forestry logs using trucks80FPICOT3227BReceive and measure logs35FPICOT3228BPlane/sand panels15FPICOT3229BMechanically stress grade panels30FPICOT3230BOperate automated stacking equipment20FPICOT3231BOperate steam boiler70FPICOT3232BOperate heat plant60FPICOT3233BSharpen and align blades and knives30FPICOT3234BCut material using CNC sizing machines30FPICOT3235BMachine material using CNC machining and processing centres30FPICOT3236BCo-ordinate stock control procedures40FPICOT3237BProduce templates30FPICOT3238BOperate a pole saw40FPICOT3239BCreate drawings using computer aided design systems30FPICOT3240BGrade heavy structural/engineered products20FPICOT3241BAssemble timber wall frames40FPICOT3242BLay up timber roof trusses40FPICOT3243BOperate a truss press20FPICOT3244BCut material to profile20FPICOT3245BGrade, sort and mark material30FPICOT3246BTest heavy structural/engineered products40FPICOT3247BSelect timber for forestry operations35?FPICOT3248ADry timber in solar assisted kilns40FPICOT3249ASelect timber preservation techniques40FPICOT3250APrepare timber to meet import/export compliance requirements60FPICOT3251APromote the carbon benefits of wood products40FPICOT3252AUse environmental care procedures to undertake fire salvage operations80FPICOT3253AConvert timber residue into products for further use30FPICOT3254AImplement environmentally sustainable work practices in the work area/work site60FPICOT3255Apply silviculture principles40FPICOT3256Apply biodiversity protection principles40FPICOT3257Follow cultural heritage requirements30FPICOT3258Comply with Soil and Water Protection40FPICOT3259Operate a four wheel drive on unsealed roads40FPICOT3260Recover four wheel drive vehicles20FPICOT4201BProduce complex truss and frame plans and details using computers80FPICOT4202BDesign timber structures80FPICOT4203BPlan and co-ordinate product assembly40FPICOT4204BSchedule and co-ordinate load shifting40FPICOT4205BCoordinate log debarking operations40FPICOT4206BPlan and coordinate boiler operations60FPICOT4207BPlan and coordinate heat plant operations60FPICOT5201BImplement sustainable forestry packages120FPICOT5202BManage forestry information and interpretations programs120FPICOT5203BManage installation and commissioning of equipment250FPICOT5204BOrganise enterprise maintenance programs100FPICOT5205ADevelop biohazard contingency plans80FPICOT5206AImplement Forestry Chain of Custody certification system80FPICOT5207AImplement sustainability in the workplace80FPICOT5208ABuild and maintain community relationships80FPICOT5209AManage tree harvesting to minimise environmental impact80FPICOT6201AManage community engagement60FPICOT6202ADevelop and manage a Forestry Chain of Custody certification process for the workplace120FPICOT6203ADevelop engineered timber products to meet energy efficient building150FPICOT6204AUse carbon accounting to estimate emissions in the workplace120FPICOT6205APrepare an enterprise carbon management report80FPICOT6207ADevelop forest management systems and processes180FPIFGM2201BCollect seed40FPIFGM2202BPrepare seed bed60FPIFGM2203BPlant trees by hand20FPIFGM2204BPlant trees mechanically20FPIFGM2205BPrune trees30FPIFGM2206BCollect data or samples for assessment20FPIFGM2207BUndertake brush cutting operations40FPIFGM2209BCut, sort and set cuttings20FPIFGM2210BImplement animal pest control procedures30FPIFGM2211BDetect fires30FPIFGM2212BGraft cuttings20FPIFGM2213BProcess seed30FPIFGM2214BMaintain visitor sites20FPIFGM2215BMeasure trees20FPIFGM3201BManage seed collection80FPIFGM3202BExtract seed20FPIFGM3203BConduct an instrument survey60FPIFGM3206BPlan and implement non-commercial thinning operations40FPIFGM3207BCo-ordinate stem improvement120FPIFGM3209BConstruct and maintain forest roads and tracks120FPIFGM3210BPatrol forest40FPIFGM3211BManage coppice stems40FPIFGM3212Fall tress manually (Intermediate)100FPIFGM3213Fall trees manually (Advanced)120FPIFGM3214Operate a four wheel drive in a towing situation30FPIFGM3215Perform complex four wheel drive operations80FPIFGM4201BImplement a forest establishment plan160FPIFGM4202BManage stand health120FPIFGM4203BDesign plantations180FPIFGM4204BConduct a pests and diseases assessment40FPIFGM4205BMonitor regeneration rates20FPIFGM4206BConduct a wood volume and yield assessment40FPIFGM4207BConduct a forest site assessment40FPIFGM4208BPlan a quarry120FPIFGM4209BInterpret and use aerial photographs for forest management15FPIFGM4210BPrepare a tender40FPIFGM5201BPlan and manage an inventory program100FPIFGM5208BManage road construction and maintenance150FPIFGM5210AManage tending operations in a native forest120FPIFGM5211ACo-ordinate stand nutrition120FPIFGM5212AManage genetic resources200FPIFGM5213ACo-ordinate plantation tending operations120FPIFGM5214ADevelop a native forest regeneration plan160FPIFGM5215ABreed trees100FPIFGM5216AManage coupe planning200FPIFGM5217APromote plantations as a sustainable form of land use80FPIFGM5218AUndertake carbon storage sampling of forests and plantations60FPIFGM6201APlan a biochar storage system for carbon capture and storage150FPIFGM6202AManage tree inventory for sustainable tree management150FPIHAR2202AHarvest trees manually (basic)80FPIHAR2203BHook up felled logs using cables (choker)50FPIHAR2204BPerform landing duties (chaser)50FPIHAR2205BConduct mobile splitting operations30FPIHAR2206BOperate a mobile chipper/mulcher30FPIHAR2207ATrim and cross cut harvested trees40FPIHAR3201BMonitor log recovery (rigging slinger)200FPIHAR3206CConduct forwarder operations200FPIHAR3207CConduct feller buncher operations150FPIHAR3208CConduct boom delimber operations150FPIHAR3210CConduct mechanical processor operations200FPIHAR3211BOperate yarder200FPIHAR3213BConduct mechanically assisted tree falling operations150FPIHAR3214COperate a single grip harvester200FPIHAR3215COperate a heavy production mobile chipper200FPIHAR3216AConduct forestry operations using crawler tractor150FPIHAR3217AConduct skidder operations150FPIHAR3218AConduct loader operations160FPIHAR3219AConduct excavator operations with grabs150FPIHAR3220Harvest trees manually (Intermediate)100FPIHAR3221Harvest trees manually (Advanced)120FPIHAR4201BApply tree jacking techniques100FPIHAR4202BCo-ordinate log recovery (hook tender)150FPIHAR4203BDesign log landings and snig tracks80FPIHAR4204BPlan and co-ordinate fire salvage operations60FPIHAR4205BImplement harvesting plans60FPIHAR5201BDesign harvesting plans200FPISAW2201BGrade round poles and debarked logs20FPISAW2202BSort boards manually20FPISAW2203BSort boards mechanically20FPISAW2204BDock boards with mechanical feed20FPISAW2205BAssemble materials using nail plates20FPISAW2206BDe-stack seasoning racks20FPISAW2207BRound softwood logs20FPISAW2208BSplit wood products20FPISAW2209BDismantle, transport and assemble hand portable sawmill50FPISAW2210BPrepare for timber treatment operations30FPISAW3201BTreat timber40FPISAW3202BProduce sawn green boards80FPISAW3203BBreak down logs40FPISAW3204BSaw flitches and cants40FPISAW3205BDry hardwood40FPISAW3206BDry softwood40FPISAW3207BSharpen band saws40FPISAW3208BSharpen circular saws30FPISAW3209BAlign sawing production systems40FPISAW3210BFile and set saws40FPISAW3211BRecondition guides40FPISAW3212BSharpen tipped circular saws30FPISAW3213BLevel and tension circular saws50FPISAW3214BJoin band saw blades40FPISAW3215BScreen wood chips40FPISAW3216BTransfer wood chips40FPISAW3217BHard face saw teeth30FPISAW3218BReplace tungsten tips30FPISAW3219BReplace stellite tips30FPISAW3220BMaintain wide band saw blades50FPISAW3221BProfile saw blanks40FPISAW3222BRecondition band mill wheels40FPISAW3223BAssess wood chips40FPISAW3224BCoordinate and monitor the wood chip stockpile40FPISAW3225BMaintain frame saw blades?40FPISAW3226BSaw logs using CNC optimising systems40FPISAW3227BSelect and saw logs in multi-species operations40FPISAW3228BApply principles of blade design to sawing procedures?40FPISAW3229BOperate a portable sawmill60FPISAW4201BPlan and monitor timber treatment plant operations50FPISAW4202BPlan and monitor saw log operations50FPISAW4203BCoordinate timber drying operations50FPISAW4204BPlan and monitor board conversion50FPITMM2201BCut material to length and angles30FPITMM2202BMachine material20FPITMM2203ARead and interpret truss, floor and/or frame fabrication plans30FPITMM3201BConvert timber40FPITMM3202BManufacture using joinery machines40FPITMM3203BEstimate and cost job40FPITMM3204AInterpret designs to prepare timber roof truss drawings and documents using computers80FPITMM3205AInterpret designs to prepare timber floor system drawings and documents using computers80FPITMM3206AInterpret designs to prepare timber wall frame drawings and documents using computers80FPITMM3207ASet up timber floor trusses30FPITMM4201BConstruct prototypes and samples40FPITMM4202BDiagnose and calculate production costs80FPITMM4203BInstall and commission CNC software120FPITMM4204BSample and test products to specifications40FPITMM4205APrepare and advise on a broad range of timber roof truss details using computers150FPITMM4206APrepare and advise on a broad range of timber floor system details using computers150FPITMM4207APrepare and advise on a broad range of timber wall frame details using computers150FPITMM5201BAssess product feasibility of designs100FPITMM5202BDevelop, trial and evaluate prototypes150FPITMM5203BGenerate and transfer complex computer-aided drawings and specifications150FPITMM5204BManage product design180FPITMM5205BOptimise CNC operations180FPITMM5206BPlan production200FPIWPP2201BCut panels 20FPIWPP2202BSurface treat raw board20FPIWPP2203BRepair veneer and ply10FPIWPP2204BRepair veneer mechanically10FPIWPP2205BPrepare chip or fibre blends20FPIWPP2206BPrepare veneer for ply20FPIWPP2207BScarf edges of veneer10FPIWPP2208BCut veneer10FPIWPP2209BSaw products from continuous ply10FPIWPP2210BCut panels to profile20FPIWPP2211BMove material by transfer equipment30FPIWPP3201BProduce veneer from debarked logs50FPIWPP3202BPaint panels10FPIWPP3203BProduce fibre from chips25FPIWPP3204BForm board70FPIWPP3205BMatch and join veneer10FPIWPP3206BLaminate and veneer board surfaces15FPIWPP3207BClip veneer10FPIWPP3208BPunch peg holes in panels10FPIWPP3209BPrepare resin and additives15FPIWPP3210BLaminate board20FPIWPP3211BMaintain caul plates and screens10FPIWPP3212BDry material30FPIWPP3213BHeat treat material15FPIWPP3214BTreat paper10FPIWPP3215BCut paper10FPIWPP3216BPress material using the daylight process40FPIWPP3217BProcess production effluent20FPIWPP3218APlan and co-ordinate machining of panels30FPIWPP3219BBlend and test binding mixes30FPIWPP3220BPlan and co-ordinate panel painting 10FPIWPP3221BTrim new panels to size20FPIWPP3222BPress laminated ply20FPIWPP3223BImmunise veneer30FPIWPP3224BProfile sand products15FPIWPP3225BProduce profile sanding shoes and wheels15FPIWPP3226BOperate a continuous press40FPIWPP3227BVacuum paint15FPIWPP3228ADry wood flakes30FPIWPP3229BClassify flake15FPIWPP3230BProduce decorative veneers40FPIWPP3231BProduce veneer from prepared flitches30FPIWPP4201BPlan and co-ordinate panel production30FPIWPP4202BPerform laboratory testing40SAMPLE TRAINING PROGRAMSA range of Sample Training Plans have been provided to demonstrate the flexibility of qualifications contained in the Code Title Training Package, but are by no means mandatory.Occupation /Work FunctionDump Person (Log landing worker)Qualification Title Certificate II in Harvesting and HaulageQualification CodeFPI20211DescriptionAppropriate for a person employed to operate on a log landing in a forest- harvesting coupe.Unit CodeUnit TitleHoursCoreFPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR2203BFollow environmental care procedures30FPICOR2204BFollow fire prevention procedures20FPICOR2205BFollow OHS policies and procedures30FPICOR2207BMaintain quality and product care18HLTFA301CApply first aid18ElectivesFPIHAR2207ATrim and cross-cut harvested trees40PUAOPE002BOperate communications systems and equipment30PUATEA001BWork in a team 20FPICOT2223BSegregate and sort logs20FPICOT2237AMaintain chainsaws20FPICOT2233BNavigate in forest areas40FPICOT3259Operate a four wheel drive on unsealed roads40FPICOT3223BGrade and mark logs 40Total Hours441Occupation /Work FunctionLaminated Beam AssemblerQualification Title Certificate II in Timber Manufactured ProductsQualification CodeFPI20511DescriptionAppropriate for a person employed to assemble glue-laminated beams in a manufacturing plant.Unit CodeUnit TitleHoursCoreFPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR2203BFollow environmental care procedures30FPICOR2205BFollow OHS policies and procedures30FPICOR2207BMaintain quality and product care20ElectivesFPICOT2207BDress boards and timber50FPICOT2203BFinish products30FPICOT2229BDock material to length25FPICOT2215BVisually stress grade hardwood20FPICOT2230BAssemble products40FPICOT2222BProduce laminated beams40FPICOT2219BUse hand-held tools20FPICOT2231BPack products30Total Hours410Occupation /Work FunctionFrame AssemblerQualification Title Certificate II in Timber Truss and Frame Design and ManufactureQualification CodeFPI20711DescriptionAppropriate for a person employed to manufacture trusses and/or frames in a manufacturing plant.Unit CodeUnit TitleHoursCoreFPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR2203BFollow environmental care procedures30FPICOR2205BFollow OHS policies and procedures30FPICOR2207BMaintain quality and product care20FPICOT2219BUse hand-held tools20FPICOT2235AAssess timber for manufacturing potential20ElectivesFPICOT2229BDock material to length25FPISAW2205BAssemble materials using nail plates20FPITMM2201BCut material to length and angles [NOT IN V3]30FPITMM2203ARead and interpret timber truss, floor and/or frame fabrication plans30TLID20101AOperate a forklift40FPICOT3242BLay up timber roof trusses40Total Hours380Occupation /Work FunctionPlantation/Forest Maintenance WorkerQualification Title Certificate III in Forest Growing and ManagementQualification CodeFPI30111DescriptionAppropriate for a person employed to conduct daily maintenance and control work around plantations.Unit CodeUnit TitleHoursCoreBSBFLM312CContribute to team effectiveness40FPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR3201BImplement safety, health and environment policies and procedures80FPICOR3203BEvaluate fire potential and prevention 40HLTFA301BApply first aid18ElectivesRIIMPO319AConduct backhoe/loader operations200FPICOT3223BGrade and mark logs40FPIFGM3212Fall trees manually (intermediate)100FPIFGM3213Fall trees manually (advanced)120AHCPMG301AControl weeds70AHCPMG302AControl plant pests, diseases and disorders80RIIVEH305AOperate and maintain a four wheel drive vehicle40Total Hours903Occupation /Work FunctionManual Harvesting OperatorQualification Title Certificate III in Harvesting and HaulageQualification CodeFPI30211DescriptionAppropriate for a person working in a forest-harvesting coupe in the Harvesting and Haulage sector.Unit CodeUnit TitleHoursCoreBSBFLM312CContribute to team effectiveness40FPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR3201BImplement safety, health and environment policies and procedures80FPICOR3202BConduct quality and product care procedures20FPICOR3203ABEvaluate fire potential and prevention 40HLTFA301BApply first aid18ElectivesFPIHAR3220Harvest trees manually (intermediate)100FPIHAR3206CConduct forwarder operations200FPIHAR3214COperate a single grip harvester200FPIHAR3217AConduct skidder operations150FPICOT2237AMaintain chainsaws 20FPIHAR2207ATrim and cut harvested trees 40Total Hours983Occupation /Work FunctionMechanised Harvesting OperatorQualification Title Certificate III in Harvesting and HaulageQualification CodeFPI30211DescriptionAppropriate for a person working in a forest/plantation-harvesting coupe in the Harvesting and Haulage sector.Unit CodeUnit TitleHoursCoreBSBFLM312CContribute to team effectiveness40FPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR3201BImplement safety, health and environment policies and procedures80FPICOR3202BConduct quality and product care procedures20FPICOR3203ABEvaluate fire potential and prevention 40HLTFA301BApply first aid18ElectivesFPIHAR3206CConduct forwarder operations200FPIHAR3214COperate a single grip harvester200FPICOT3224BPlan and monitor equipment maintenance40FPIFGM3215Perform complex four wheel drive operations80RIIVEH305AOperate and maintain a four wheel drive vehicle40FPIHAR2207ATrim and cut harvested trees 40Total Hours873Occupation /Work FunctionMill Plant Process Operator (Wood chipping)Qualification Title Certificate III in Sawmilling & ProcessingQualification CodeFPI30311DescriptionAppropriate for a person working in a wood chipping plant in the Sawmilling and Processing sector.Unit CodeUnit TitleHoursCoreBSBFLM312CContribute to team effectiveness40FPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR3201BImplement safety, health and environment policies and procedures80FPICOR3202BConduct quality and product care procedures20FPICOR3204BVisually assess materials20ElectivesFPICOT3203BWeigh loads20FPICOT3233BSharpen and align blades and knives30FPISAW3215BScreen wood chips40FPISAW3216BTransfer wood chips40FPISAW3223BAssess wood chips40FPISAW3224BCo-ordinate and monitor the wood chip stockpile40FPIHAR3218AConduct loader operations 160Total Hours645Occupation /Work FunctionSawyerQualification Title Certificate III in Sawmilling and ProcessingQualification CodeFPI30311DescriptionAppropriate for a person employed as a sawyer/high-tech sawing specialist.Unit CodeUnit TitleHoursCoreBSBFLM312CContribute to team effectiveness40FPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR3201BImplement safety, health and environment policies and procedures80FPICOR3202BConduct quality and product care procedures20FPICOR3204BVisually assess materials20ElectivesFPISAW3202BProduce sawn green boards80FPISAW3204BSaw flitches and cants40FPICOT3245BGrade, sort and mark material30FPISAW3226BSaw logs using CNC optimising systems40BSBFLM303CContribute to effective workplace relationships40FPISAW2204BDock boards with mechanical feed 20FPICOT3247BSelect timber for forestry operations 35Total Hours520Occupation /Work FunctionTimber Drying OperationsQualification Title Certificate III in Sawmilling & ProcessingQualification CodeFPI30311DescriptionAppropriate for a person working with high tech softwood in the Sawmilling and Processing sector.Unit CodeUnit TitleHoursCoreBSBFLM312CContribute to team effectiveness40FPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR3201BImplement safety, health and environment policies and procedures80FPICOR3202BConduct quality and product care procedures20FPICOR3204BVisually assess materials20ElectivesFPICOT3231BOperate steam boiler70FPISAW3201BDry softwood40FPICOT3245BGrade, sort and mark material30FPICOT3232BOperate heat plant60AHCCHM303APrepare and apply chemicals 70FPICOT3224BPlan and monitor equipment maintenance40TLID20101AOperate a forklift 40Total Hours585Occupation /Work FunctionLathe OperatorQualification Title Certificate III in Wood Panelling ProductsQualification CodeFPI30411DescriptionAppropriate for a person working as Lathe Operator in the Wood Panelling industry.Unit CodeUnit TitleHoursCoreBSBFLM312CContribute to team effectiveness40FPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR3201BImplement safety, health and environment policies and procedures80FPICOR3202BConduct quality and product care procedures20FPICOR3204BVisually assess materials20ElectivesFPICOT3227AReceive and measure logs35FPIWPP3204BForm board70FPISAW3226BSaw logs using CNC optimising systems40FPIWPP3201BProduce veneer from debarked logs50FPICOT3212BReplace saws, blades and guides40FPICOT3216BAssess and maintain cutter performance40TLID3043BShift loads using gantry equipment80Total Hours590Occupation /Work FunctionLaminated Beam MachinistQualification Title Certificate III in Timber Manufactured ProductsQualification CodeFPI30511DescriptionAppropriate to a person employed to work in a timber lamination business.Unit CodeUnit TitleHoursCoreBSBFLM312CContribute to team effectiveness40FPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR3201BImplement safety, health and environment policies and procedures80FPICOR3202BConduct quality and product care procedures20FPICOR3204BVisually assess material20ElectivesFPICOT3212BReplace saws, blades and guides40FPICOT3205BDress boards using multi-headed machines40FPICOT3208BTest strength of joints25FPICOT3207BSet up, operate and maintain finger jointing operations40FPICOT322BPlane/sand panels15FPICOT3236BCoordinate stock control procedures40BSBINM301AOrganise workplace information30Total Hours465Occupation /Work FunctionTimber Sales RepresentativeQualification Title Certificate III in Timber Manufactured ProductsQualification CodeFPI30511DescriptionAppropriate to a person employed to work in a wholesale or timber trade supplies store.Unit CodeUnit TitleHoursCoreBSBFLM312CContribute to team effectiveness40FPICOR2201BWork effectively in the forest and forest products industry35FPICOR3202BConduct quality and product care procedures20SIRXSLS004ABuild relationships with customers35SIRRRPK014ARecommend specialised products and services35FPICOR3201BImplement safety, health and environment policies and procedures80ElectivesSIRXINV002AMaintain and order stock35SIRXRSK002AMaintain store security20FPICOT3236BCoordinate stock control procedures40TLIA3018AOrganise despatch operations40BSBCMM301BProcess customer complaints30BSBFLM303CContribute to effective workplace relationships40TLIA2012APick and process orders20Total Hours470Occupation /Work FunctionSaw DoctorQualification Title Certificate III in SawdoctoringQualification Code FPI30711DescriptionAppropriate for a person employed to troubleshoot and maintain saws and sawing equipment.Unit CodeUnit TitleHoursCoreBSBFLM312CContribute to team effectiveness40FPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOT3201BImplement safety, health and environment policies and procedures80FPICOT3204BPrepare and interpret sketches and drawings30FPICOT3211BMaintain sawdoctoring tools30FPICOT3233BSharpen and align blades and knives30FPICOT3247BSelect timber for forestry operations35FPISAW3228BApply principles of blade design to sawing procedures40MEM05006CPerform brazing and/or silver soldering20ElectivesFPICOT3201BHand sharpen knives and blades20FPICOT3210BSharpen cutting tools20FPICOT3212BReplace saws, blades and guides40FPICOT3213BManufacture cutting tools40FPICOT3215BSwage and shape saw blades40FPICOT3237BProduce templates30FPISAW3207BSharpen band saws40FPISAW3208BSharpen circular saws30FPISAW3212BSharpen tipped circular saws30FPISAW3213BLevel and tension circular saws50FPISAW3214BJoin band saw blades40FPISAW3217BHard face saw teeth30FPISAW3218BReplace tungsten tips30FPISAW3219BReplace stellite tips30FPISAW3220BMaintain wide band saw blades50MEM05004CPerform routine oxy acetylene welding20Total Hours920Occupation /Work FunctionWood MachinistQualification Title Certificate III in WoodmachiningQualification CodeFPI30811DescriptionAppropriate for a person employed to operate, troubleshoot and maintain a range of Woodmachining machinery.Unit CodeUnit TitleHoursCoreBSBFLM312CContribute to team effectiveness40FPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR3201BImplement safety, health and environment policies and procedures80FPICOR3202BConduct quality and product care procedures20FPICOT3201BHand sharpen knives and blades20FPICOT3204BPrepare and interpret sketches and drawings30FPICOT3247BSelect timber for forestry operations35FPISAW3228BApply principles of blade design to sawing procedures40ElectivesFPICOT2207BDress boards and timber50FPICOT2208BResaw boards and timber20FPICOT3205BDress boards using multi-headed machines40FPICOT3239BCreate drawings using computer-aided design systems30FPICOT3244BCut material to profile20FPITMM2202BMachine material20FPITMM3202BManufacture using joinery machines40FPICOT3210BSharpen cutting tools20FPICOT3212BReplace saws, blades and guides40FPICOT3216BAssess and maintain saw performance40FPICOT3217BAssess and maintain cutter performance40FPICOT3233BSharpen and align blades and knives30FPICOT3237BProduce templates30FPICOT2219BUse hand-held tools20FPICOT2232BCut material to shape using a saw20FPICOT3234BCut material using CNC sizing machines30FPITMM3201BConvert timber40FPICOT3235BMachine material using CNC machining and processing centres30Total Hours900Occupation /Work FunctionFrame and Truss Estimator DetailerQualification Title Certificate III in Timber Truss and Frame Design and ManufactureQualification CodeFPI30911DescriptionAppropriate for a person employed at a junior level to design and prepare truss and/or floor drawings.Unit CodeUnit TitleHoursCoreFPICOR2201BWork effectively in the forest and forest products industry35FPICOR2202BCommunicate and interact effectively in the workplace40FPICOR3201BImplement safety, health and environment policies and procedures80FPICOR3202BConduct quality and product care procedures20BSBFLM312CContribute to team effectiveness40ElectivesFPITMM3204AInterpret designs to prepare timber roof truss drawings and documents using computers80FPICOT3204BPrepare and interpret sketches and drawings30FPICOT3214BTake off material quantities30FPICOT3218BQuote and interpret from manufactured timber product plans50FPICOT3220BQuote and interpret from computerised timber manufactured product plans50FPICOT3239BCreate drawings using computer-aided design systems30CPCCBC4001AApply building codes and standards to the construction process for low rise building projects40BSBCUS301ADeliver and monitor a service to customers35Total Hours560Occupation /Work FunctionTeam Leader, forestry OperationsQualification Title Certificate IV in Forest OperationsQualification CodeFPI40111DescriptionAppropriate for a person working in the Forestry sector at Certificate IV level.Unit CodeUnit TitleHoursCoreBSBLED401ADevelop teams and individuals40FPICOR3203BEvaluate fire potential and prevention40FPICOR4201BMonitor safety, health and environment policies and procedures80FPICOR4202BMonitor and review forestry operations80FPICOR4203BMonitor quality and product care procedures80ElectivesFPIFGM4207BConduct a forest site assessment40FPIFGM4205BMonitor regeneration rates20FPIFGM4203BDesign plantations180FPIFGM4201BImplement a forest establishment plan160AHCCHM402APlan and implement a chemical use program90BSBWRT401AWrite complex documents50BSBWOR401AEstablish effective workplace relationships50AHCPMG402ADevelop a pest management action plan within a local area100FPIHAR4205BImplement harvesting plans60Total Hours1070Occupation /Work FunctionChip Mill Plant OperatorQualification Title Certificate IV in Timber ProcessingQualification CodeFPI40211DescriptionAppropriate for a person working in a wood chipping plant in the Timber Processing sector at Certificate IV level.Unit CodeUnit TitleHoursCoreBSBLED401ADevelop teams and individuals40FPICOR4201BMonitor safety, health and environment policies and procedures80FPICOR4203BMonitor quality and product care procedures80ElectivesFPITMM4204BSample and test products to specifications40FPIWPP4202BPerform laboratory testing40AHCMOM402ASupervise maintenance of machinery and equipment80MSS403010AFacilitate change in an organisation implementing competitive systems and practices50FPICOT4202BDesign timber structures80BSBRSK401AIdentify risk and apply risk management processes50BSBMGT403AImplement continuous improvement40BSBWRT401AWrite complex documents50BSBWOR401AEstablish effective workplace relationships50BSBWOR402APromote team effectiveness50BSBWOR301BOrganise personal work priorities and development60Total Hours790Occupation /Work FunctionFrame and Truss Manufacturing SupervisorQualification Title Certificate IV in Timber Truss and Frame ManufactureQualification CodeFPI40311DescriptionAppropriate for a person employed as a supervisor in truss and/or frame manufacturing plant.Unit CodeUnit TitleHoursCoreFPICOR4201BMonitor safety, health and environment policies and procedures80FPICOR4203BMonitor quality and product care procedures80BSBLED401ADevelop teams and individuals40ElectivesFPICOT4203BPlan and co-ordinate product assembly40BSBCUS501BManage quality customer service40TAEDEL402APlan, organise and facilitate learning in the workplace25BSBMGT402AImplement an operation plan40BSBPMG407AApply risk management techniques40BSBPMG510AManage projects60CPCCBC4024AResolve business disputes20CPCSUS4001AImplement and monitor environmentally sustainable work practices40HLTFA402AApply advanced first aid30MSS403001AImplement competitive systems and practices50MSS402050AMonitor process capability30HLTFA403AManage first aid in the workplace16CPCCSV5010AInteract with clients in a regulated environment36BSBITS401BMaintain business technology40Total Hours707Occupation /Work FunctionFrame and Truss Design SupervisorQualification Title Certificate IV in Timber Truss and Frame DesignQualification Code FPI40411DescriptionAppropriate for a person employed as a supervisor in the design of truss and or frames. NotesEntry requirements apply for this qualification-specified units contained in the FPI30910 Certificate III Timber Truss and Frame Design and Manufacture. Refer to the training package qualification packaging rules for more information.Unit CodeUnit TitleHoursCoreFPICOR4201BMonitor safety, health and environment policies and procedures80FPICOR4203BMonitor quality and product care procedures80BSBLED401ADevelop teams and individuals40ElectivesFPITMM4205APrepare and advise on a broad range of timber roof truss details using computers150FPITMM4206APrepare and advise on a broad range of timber floor system details using computers150FPITMM4207APrepare and advise on a broad range of timber wall frame details using computers150FPICOT4202BDesign timber structures80CPCCBC4001AApply building codes and standards to the construction process for low rise building projects40CPCSUS4001AImplement and monitor environmentally sustainable work practices40MSAPMSUP390AUse structured problem solving tools40FPITMM4202BDiagnose and calculate production costs80BSBCUS401BCo-ordinate implementation of customer service strategies40BSBINM401AImplement workplace information system40CPCCBC4004AIdentify and produce estimated costs for building and construction projects60CPCCBC4024AResolve business disputes20CPCCSV5010AInteract with clients in a regulated environment36MSs40406AFacilitate the use of planning software systems in a work area or team50Total Hours1176Occupation /Work FunctionTree Growing and Maintenance ManagerQualification Title Diploma of Forest and Forest ProductsQualification CodeFPI50111DescriptionAppropriate for a person working as a tree growing and maintenance manager in the Forest Growing and Management sector.Unit CodeUnit TitleHoursCoreBSBCUS501BManage quality customer service40BSBMGT502BManage people performance70BSBMGT516CFacilitate continuous improvement60BSBOHS504BApply principles of OHS risk management40BSBWOR501BManage personal work priorities and professional development60BSBWOR502BEnsure team effectiveness60ElectivesFPICOT5202BManage forestry information and interpretations programs120FPIFGM5211ACo-ordinate stand nutrition120FPIFGM5213ACo-ordinate plantation tending operations120FPIFGM5216AManage coupe planning200AHCPMG503ADevelop a strategy for the management of target pests100AHCWRK505AManage trial and/or research material140AHCPGD402APlan a plant establishment program80AHCNSY401APlan a growing-on program80AHCNSY402APlan a propagation program120Total Hours1410Occupation /Work FunctionFrame and Truss ManufacturerQualification Title Diploma of Timber Truss and Frame ManufactureQualification CodeFPI50311DescriptionAppropriate for a person employed in senior capacity in a Truss and Frame manufacturing plant.Unit CodeUnit TitleHoursCoreBSBCUS501BManage quality customer service40BSBMGT502BManage people performance70BSBMGT516CFacilitate continuous improvement60BSBOHS504BApply principles of OHS risk management40BSBWOR501BManage personal work priorities and professional development60ElectivesFPITMM5203BGenerate and transfer complex computer-aided drawing and specifications150FPITMM5204BManage product design180CPCCSV5011AApply building codes and standards to residential buildings36CPCCSV5012AAssess timber design frames for one and two storey buildings 36FPITMM5201BAssess product feasibility of designs100FPITMM5206BPlan production200BSBINM501AManage an information or knowledge management system50BSBMKG501BIdentify and evaluate marketing opportunities70FPICOT5203BManage installation and commissioning of equipment250FPITMM4202BDiagnose and calculate production costs80MSS405031AUndertake value analysis of a product or process costs in terms of customer requirements60MSS405062ADevelop a documentation control strategy for an organisation60BSBAUD501BInitiate a quality audit40BSBSUS501ADevelop workplace policy procedures for sustainability50Total Hours1632Occupation /Work FunctionFrame and Truss Designer Qualification Title Diploma of Timber Truss and Frame DesignQualification CodeFPI50411DescriptionAppropriate for a person employed in senior capacity in a Truss and Frame manufacturing plant.Unit CodeUnit TitleHoursCoreBSBCUS501BManage quality customer service40BSBMGT502BManage people performance70BSBMGT516CFacilitate continuous improvement60BSBOHS504BApply principles of OHS risk management40BSBWOR501BManage personal work priorities and professional development60ElectivesFPITMM5203BGenerate and transfer complex computer-aided drawing and specifications150FPITMM5204BManage product design180CPCCSV5011AApply building codes and standards to residential buildings36CPCCSV5012AAssess timber design frames for one and two storey buildings 36FPITMM5201BAssess product feasibility of designs 100MSS405030AOptimise cost of product or service60BSBINM501AManage an information or knowledge management system50BSBMKG501BIdentify and evaluate marketing opportunities70CPCCSV5015AAssess structural requirements for domestic scale buildings72MSS404052AApply statistics to operational processes40MSS405031AUndertake value analysis of a product or process costs in terms of customer requirements60MSS405062ADevelop a documentation control strategy for an organisation60MSS405075AFacilitate the development of a new product 80BSBSUS501ADevelop workplace policy procedures for sustainability50Total Hours1314Occupation /Work FunctionDistrict Forester/Senior Forester/Plantation ManagerQualification Title Advanced Diploma of Forest Industry SustainabilityQualification CodeFPI60111DescriptionA person working in this job role will be overseeing the total operation of a forest or plantation area. They will have extensive supervisory and management responsibilities in addition to their forest stewardship role.Unit CodeUnit TitleHoursCoreBSBWOR501BManage personal work priorities and professional development60FPICOR6201AManage sustainability in the workplace?120FPICOR6202AImplement practices to maximize value from wood residues80?ElectivesFPIFGM5217APromote plantations as a sustainable form of land management80FPIFGM6202AManage tree inventory for sustainable tree management150FPICOT6207ADevelop forest management systems and processes200BSBINN601B Manage organisational change60BSBINN801A Lead innovative thinking and practice80BSBMGT608CManage innovation and continuous improvement70PSPMNGT703ALead and influence change70BSBPMG510AManage projects60BSBFIM501AManage budgets and financial plans70BSBRSK501BManage risk60BSBMGT502B Manage people performance70Total Hours1230CONTACTS AND LINKSIndustry Skills Council (ISC)Forestry Industry Skills CouncilThis ISC is responsible for developing FPI11 V1Forest and Forest Products Training Package and can be contacted for further information. You can also source copies of the Training Package and support material.Address:559A Queensberry StNorth Melbourne VIC 3051Phone:03 9321 3500Email: forestworks@.auWeb: Register for VET in .au (TGA)TGA is the Australian governments’ official National Register of information on Training Packages, qualifications, courses, units of competency and RTOs..au Australian GovernmentThe Department of Education, Employment and Workplace Relations (DEEWR)DEEWR provides a range of services and resources to assist in delivery of Training Packages. Search the DEEWR website for links to a range of relevant resources and publications..auState GovernmentDepartment of Education and Early Childhood DevelopmentHigher Education and Skills GroupHigher Education and Skills Group is responsible for funding and the implementation of Vocational Education and Training (VET) in Victoria, including Apprenticeships and Traineeships.General information:skills..auApproved Training Schemes: Maintenance Manager (CMM)Primary Industries Curriculum Maintenance ManagerThe CMM service is provided by Executive Officers located within Victorian TAFE institutes on behalf of Skills Victoria.Kate BryceAddress: NMIT – Fairfield CampusYarra Bend Rd, Fairfield VIC 3078Phone:03 9269 1391Email: kateb-rd@nmit.vic.edu.auWeb: nmit.edu.au/ State VET Regulatory AuthorityVictorian Registration and Qualifications Authority (VRQA)The VRQA is a statutory authority responsible for the registration of education and training providers in Victoria to ensure the delivery of quality education and training.vrqa..auPhone: 03 9637 2806National VET Regulatory AuthorityAustralian Skills Quality Authority (ASQA)ASQA is the national regulator for Australia’s VET sector vocational education and training sector. ASQA regulates courses and training providers to ensure nationally approved quality standards are met..auInfo line: 1300 701 801Industry Regulatory BodyDepartment of Sustainability & Environment (Harvesting and Haulage Regulations)The industry Regulatory body can provide advice on licensing, legislative or regulatory requirements which may impact on the delivery of training or the issuance of qualifications in this Training Package.Address: Head Office 8 Nicholson StEast Melbourne VIC 3002Phone:03 5336 6687Email: : des..au/dseWeb: des..au/dseDepartment of Primary Industries (DPI)Agricultural Chemical Users Permit (ACUPAddress: GPO Box 4440Melbourne VIC 3001Phone: 136 186 within AustraliaEmail: customer.service@dpi..auWeb: dpi..au WorkSafe WorkSafe VictoriaWorkSafe needs to provide written verification before High Risk Work Units can be added to an RTO’s scope of registration.worksafe..au Info line: 1800 136 089Other contactsAustralian Timber Trainers AssociationAddress: PO Box 1954Strawberry Hills, NSW 2012Phone: 0403 570 673Email: secretary@atta.rorg.auWeb: .au/GLOSSARYCodeNationally endorsed Training Package qualification code.TitleNationally endorsed Training Package qualification title.Unit CodeNationally endorsed Training Package unit code.Unit TitleNationally endorsed Training Package unit title.Nominal HoursThe anticipated hours of supervised learning or training deemed necessary to conduct training and assessment activities associated with the program of study. These hours are determined by the Victorian State Training Authority. Nominal hours may vary for a qualification depending on the units of competency selected. Scope of RegistrationScope of registration specifies the AQF qualifications and/or units of competency the training organisation is registered to issue and the industry training and/or assessment services it is registered to provide. ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download