Ethernet performance do not achieve the standard speed by ...



EWM FAQCategoryEWMDate2019/02/26KeywordSpecific SIM card,EWM-C109F6X1E,EWM-C109F6XBR,Windows10,Ubuntu 18.04,Wvdial, Dial-up connectionQuestion:How to configure 3G’s setting when using with specific SIM Card on Windows 10/Ubuntu 18.04 OS?Instructions :Step 1Confirm your carrier detail information about the specific SIM card from carrier Specific APNUsername/Password<Example: U.K project> APN= Username = ArkessaPassword = ArkessaStep 2 Set up APN/Username/Password settings in EWM-C109F6X1E/EWM-C109F6XBR by AT commands For Windows 10:Input following AT commands by Putty<AT commands>AT+CGDCONT=1,"IP","PAP:" //APNAT+UPSD=0,1,”” //APNAT+UPSD=0,2,”Arkessa” //UsernameAT+UPSD=0,3,”Arkessa” //PasswordAT+UPSD=0,6,1AT+UPSDA=0,1 //store your profile in NVMNote: the above configuration must be loaded every time when system boots up,please input? “AT+UPSDA=0,2” to load your profile before establishing cellular connection Make sure each AT commands has configured and return “OK”Input “AT+UPSD=0” to confirm all of related settings have configured or notFor Ubuntu 18.04:Please input above same AT commands by “minicom” utility 3Input SIM card’s username/password in connection utility For Windows 10:Establish Dial-up connection in window’s dial-up sessionInput dial up number “*99#”Input SIM card’s username & passwordClick “Dial” button to establish connectionFor Ubuntu 18.04:Install “Wvdial” application by Typing “apt-get install wvdial” command in terminalCreate your “wvdial.conf” profile in specific path (/etc/wvdial.conf) which must refer to your sim card information<Example_3G>[Dialer Defaults]Baud = 115200Modem = /dev/ttyACM0 //select correct ACM portInit1 =AT+CGDCONT=1,"ip","internet"Phone=*99#Username=’’ //please enter Apostrophe keys twice when the username is emptyPassword=’’ //please enter Apostrophe keys twice when the password is emptyDial Command =ATDTNEW PPPD=yesNOTE: Please remember to modify your APN(internet) and the serial port number of Modem before saving profileExit “minicom” application (CTRL+A+Z) and input “wvdial” command to establish 3G connection ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download