945 - AMS Logistics
AMS Logistics
945 Warehouse Shipping Advice
Specification
|945 |Warehouse Shipping Advice |
| |Functional Group=SW |
This Draft Standard for Trial Use contains the format and establishes the data contents of the Warehouse Shipping Advice Transaction Set (945) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used by the warehouse to advise the depositor that shipment was made. It is used to reconcile order quantities with shipment quantities.
Segments:
| |Pos |Id |
To indicate the beginning of a functional group and to provide control information
Semantics:
1. GS04 is the Group Date.
2. GS05 is the Group Time.
3. The data interchange control number GS06 in this header must be identical to the same data element in the associated Functional Group Trailer GE02.
Comments:
1. A functional group of related transaction sets, within the scope of X12 standards, consists of a collection of similar transaction sets enclosed by a functional group header and a functional group trailer.
AMS Logistics Note:
[Example: GS~SW~GSID~TURNKEY~970408~1528~000000006~X~003050]
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |GS01 |479 |Functional Identifier Code |M |ID |2/2 | Required | |
| | | |Description: Code identifying a group of application related Transaction Sets. | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |SW Warehouse Shipping Advice (945) | | | | | |
| |GS02 |142 |Application Sender's Code |M |AN |2/15 |Required | |
| | | |Description: Code identifying party sending transmission. Codes agreed to by | | | | | |
| | | |trading partners. | | | | | |
| |GS03 |124 |Application Receiver's Code |M |AN |2/15 |Required | |
| | | |Description: Code identifying party receiving transmission. Codes agreed to by | | | | | |
| | | |trading partners. | | | | | |
| |GS04 |373 |Date |M |DT |6/6 |Required | |
| | | |Description: Date (YYMMDD). | | | | | |
| |GS05 |337 |Time |M |TM |4/8 |Required | |
| | | |Description: Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or | | | | | |
| | | |HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer | | | | | |
| | | |seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as | | | | | |
| | | |follows: D = tenths (0-9) and DD = hundredths (00-99) | | | | | |
| |GS06 |28 |Group Control Number |M |N0 |1/9 |Required | |
| | | |Description: Assigned number originated and maintained by the sender. | | | | | |
| |GS07 |455 |Responsible Agency Code |M |ID |1/2 |Required | |
| | | |Description: Code used in conjunction with Data Element 480 to identify the issuer| | | | | |
| | | |of the standard. | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |X Accredited Standards Committee X12 | | | | | |
| |GS08 |480 |Version / Release / Industry Identifier Code |M |AN |1/12 |Required | |
| | | |Description: Code indicating the version, release, subrelease, and industry | | | | | |
| | | |identifier of the EDI standard being used, including the GS and GE segments. If | | | | | |
| | | |code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version | | | | | |
| | | |number; positions 4-6 are the release and subrelease, level of the version; and | | | | | |
| | | |positions 7-12 are the industry or trade association identifiers (optionally | | | | | |
| | | |assigned by user). If code in DE455 in GS segment is T, then other formats are | | | | | |
| | | |allowed. | | | | | |
|ST |Transaction Set Header |Pos: 010 Max: 1 |
| | |Heading - Mandatory |
| | |Loop: N/A Elements: 2 |
To indicate the start of a transaction set and to assign a control number
Semantics:
1. The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the invoice transaction set).
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |ST01 |143 |Transaction Set Identifier Code |M |ID |3/3 |Required | |
| | | |Description: Code uniquely identifying a Transaction Set. | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |945 X12.193 Warehouse Shipping Advice | | | | | |
| |ST02 |329 |Transaction Set Control Number |M |AN |4/9 |Required | |
| | | |Description: Identifying control number that must be unique within the transaction| | | | | |
| | | |set functional group assigned by the originator for a transaction set | | | | | |
|W06 |Warehouse Shipment Identification |Pos: 020 Max: 1 |
| | |Heading - Mandatory |
| | |Loop: N/A Elements: 4 |
To provide identifying numbers, dates, and other basic data for this transaction set
Semantics:
1. W0603 is the actual date on which shipment was made.
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |W0601 |514 |Reporting Code |M |ID |1/1 |Required | |
| | | |Description: Code specifying the basis used when reporting shipment information. | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |F Full Detail | | | | | |
| |W0602 |285 |Depositor Order Number |O |AN |1/22 |Required | |
| | | |Description: Your Original Order number. | | | | | |
| | | |AMS Logistics Note: [Delivery Number – This is the order number that was | | | | | |
| | | |transmitted to AMS for picking. This number is normally no greater than 15 chars | | | | | |
| | | |in length.] | | | | | |
| |W0603 |373 |Date |O |DT |6/6 |Required | |
| | | |Description: Date (YYMMDD). | | | | | |
| | | |AMS Logistics Note: [Actual date on which shipment was made. | | | | | |
| | | |6 character date, 8 character date in G62 segment.] | | | | | |
| |W0604 |145 |Shipment Identification Number |O |AN |1/30 |Required | |
| | | |Description: Identification number assigned to the shipment by the shipper that | | | | | |
| | | |uniquely identifies the shipment from origin to ultimate destination and is not | | | | | |
| | | |subject to modification. (Does not contain blanks or special characters.) | | | | | |
| | | |AMS Logistics Note: [Bill of Lading Number when shipped using common carrier; | | | | | |
| | | |“999999” when shipped using small parcel carrier.] | | | | | |
|N1 |Name |Pos: 040 Max: 1 |
| | |Heading - Mandatory |
| | |Loop: 0100 Elements: 4 |
To identify a party by type of organization, name and code
Comments:
1. This segment, used alone, provides the most efficient method of providing organizational identification.
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |N101 |98 |Entity Identifier Code |M |ID |2/2 |Required | |
| | | |Description: Code identifying an organizational entity, a physical location, or an| | | | | |
| | | |individual | | | | | |
| | | |AMS Logistics Note: [Ship From Site ID qualifier.] | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |SF Ship From | | | | | |
| |N102 |93 |Name |C |AN |1/35 |Used | |
| | | |Description: Free-form name. “AMS Logistics” | | | | | |
| |N103 |66 |Identification Code Qualifier |C |ID |1/2 |Required | |
| | | |Description: Code designating the system/method of code structure used for | | | | | |
| | | |Identification Code (67). | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |91 Assigned by Seller or Seller's Agent | | | | | |
| |N104 |67 |Identification Code |C |AN |2/20 |Required | |
| | | |Description: Code identifying a party or other code. | | | | | |
| | | |AMS Logistics Note: [This is the city of shipment origin; all CAPS.] | | | | | |
|G62 |Date/Time |Pos: 110 Max: 5 |
| | |Heading - Optional |
| | |Loop: N/A Elements: 3 |
To specify pertinent dates and times
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |G6201 |432 |Date Qualifier |C |ID |2/2 |Required | |
| | | |Description: Code specifying type of date. | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |11 Shipped on This Date | | | | | |
| |G6202 |373 |Date |C |DT |6/6 |Required | |
| | | |Description: Date (YYMMDD). | | | | | |
| | | |AMS Logistics Note: [Actual date on which the shipment was made.] | | | | | |
| |G6206 |624 |Century |O |N0 |2/2 |Required | |
| | | |Description: The first two characters in the designation of the year (CCYY). | | | | | |
| | | |AMS Logistics Note: [Actual century on which the shipment was made.] | | | | | |
|NTE |Note/Special Instruction |Pos: 120 Max: 20 |
| | |Heading - Optional |
| | |Loop: N/A Elements: 2 |
To transmit information in a free-form format, if necessary, for comment or special instruction
Comments:
1. The NTE segment permits free-form information/data which, under ANSI X12 standard implementations, is not machine processable. The use of the ``NTE'' segment should therefore be avoided, if at all possible, in an automated environment.
2. This element is not always present.
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |NTE01 |363 |Note Reference Code |O |ID |3/3 |Used | |
| | | |Description: Code identifying the functional area or purpose for which the note | | | | | |
| | | |applies. | | | | | |
| | | |AMS Logistics Note: [General Shipment instructions.] | | | | | |
| | | | | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |SHP Shipment Instruction | | | | | |
| |NTE02 |352 |Description |M |AN |1/80 |Required | |
| | | |Description: A free-form description to clarify the related data elements and | | | | | |
| | | |their content. | | | | | |
|W27 |Carrier Detail |Pos: 130 Max: 1 |
| | |Heading - Optional |
| | |Loop: N/A Elements: 6 |
To specify details of the transportation equipment and carrier routing details
Comments:
1. Shipment/order status code is used at the total invoice level only when differences cannot be provided at the line item level or when the entire order has been shipped complete.
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |W2701 |91 |Transportation Method/Type Code |M |ID |1/2 |Required | |
| | | |Description: Code specifying the method or type of transportation for the | | | | | |
| | | |shipment. | | | | | |
| | | | | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |A Air | | | | | |
| | | |D Parcel Post | | | | | |
| | | |E Expedited Truck | | | | | |
| | | |L Contract Carrier | | | | | |
| | | |M Motor (Common Carrier) | | | | | |
| | | |S Ocean | | | | | |
| | | |T Best Way (Shippers Option) | | | | | |
| | | |U Private Parcel Service | | | | | |
| | | |X Intermodal (Piggyback) | | | | | |
| | | |AE Air Express | | | | | |
| | | |CE Customer Pickup / Customer's Expense | | | | | |
| |W2702 |140 |Standard Carrier Alpha Code |C |ID |2/4 |Required | |
| | | |Description: Standard Carrier Alpha Code | | | | | |
| | | |AMS Logistics Note: [Carrier SCAC Code | | | | | |
| | | |Refer to National Motor Freight Traffic Association publication for acceptable | | | | | |
| | | |code values. | | | | | |
| | | |Maximum application field length is 4 characters] | | | | | |
| |W2703 |387 |Routing |C |AN |1/35 |Used | |
| | | |Description: Free-form description of the routing or requested routing for | | | | | |
| | | |shipment, or the originating carrier's identity. | | | | | |
| | | |AMS Logistics Note: [Contains the Ship Via Description.] | | | | | |
| |W2704 |146 |Shipment Method of Payment |O |ID |2/2 |Required | |
| | | |Description: Code identifying payment terms for transportation charges. | | | | | |
| | | |AMS Logistics Note: [This segment is for future use. Currently not used] | | | | | |
| |W2706 |206 |Equipment Initial |O |AN |1/4 |Required | |
| | | |Description: Prefix or alphabetic part of an equipment unit's identifying number. | | | | | |
| | | |AMS Logistics Note: [Service Level Code: | | | | | |
| | | | | | | | | |
| | | |00 - No guarantee | | | | | |
| | | |01 - Overnight | | | | | |
| | | |02 - 2 day delivery | | | | | |
| | | |03 - 3 day delivery | | | | | |
| | | |04 – Saturday Delivery | | | | | |
| | | |05 - 3-5 day delivery] | | | | | |
| |W2707 |207 |Equipment Number |O |AN |1/10 |Used | |
| | | |Description: Sequencing or serial part of an equipment unit's identifying number | | | | | |
| | | |(pure numeric form for equipment number is preferred). | | | | | |
| | | |AMS Logistics Note: [Trailer ID - Used to uniquely identify a trailer when | | | | | |
| | | |shipper is a common carrier. This field is blank when shipper is a parcel | | | | | |
| | | |carrier.] | | | | | |
|W10 |Warehouse Additional Carrier Information | |
| | |Pos: 150 Max: 10 |
| | |Heading - Optional |
| | |Loop: N/A Elements: 1 |
To transmit shipping information and requirements
Semantics:
1. W1006 is the minimum allowable temperature condition for shipment (degrees fahrenheit.) This information is not always present; presence is based upon the shipped product.
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |W1002 |406 |Quantity of Pallets Shipped |O |N0 |1/3 |Required | |
| | | |Description: Number of pallets shipped. | | | | | |
| | | |AMS Logistics Note: [Number of physical pallets included in the shipment. | | | | | |
| | | |Unless the total units shipped is zero, or there is no physical pallet count | | | | | |
| | | |(loose cartons, etc.) this field should always be populated with a value greater | | | | | |
| | | |than zero. Pallet count may be captured via data entry, or calculated as the | | | | | |
| | | |total count of mixed and standard pallets labels generated by the vendor's | | | | | |
| | | |system.] | | | | | |
|W12 |Warehouse Item Detail |Pos: 020 Max: 1 |
| | |Detail - Optional |
| | |Loop: 0300 Elements: 7 |
To designate those line items that was shipped
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |W1201 |368 |Shipment/Order Status Code |M |ID |2/2 |Required | |
| | | |Description: Code indicating the status of an order or shipment or the disposition| | | | | |
| | | |of any difference between the quantity ordered and the quantity shipped for a line| | | | | |
| | | |item or transaction. | | | | | |
| | | | | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |CC Shipment Complete on (Date) | | | | | |
| | | |CM Shipment Complete with Additional Quantity | | | | | |
| | | |CP Partial Shipment on (Date), Considered No Backorder | | | | | |
| |W1202 |330 |Quantity Ordered |O |R |1/9 |Required | |
| | | |Description: Quantity ordered. | | | | | |
| | | |AMS Logistics Note: [Quantity specified in the 940 to ship.] | | | | | |
| |W1203 |382 |Number of Units Shipped |O |R |1/10 |Required | |
| | | |Description: Numeric value of units shipped in manufacturer's shipping units for a| | | | | |
| | | |line item or transaction set. | | | | | |
| |W1204 |383 |Quantity Difference |O |R |1/9 |Required | |
| | | |Description: Numeric value of variance between ordered and shipped quantities. | | | | | |
| |W1205 |355 |Unit or Basis for Measurement Code |O |ID |2/2 |Required | |
| | | |Description: Code specifying the units in which a value is being expressed, or | | | | | |
| | | |manner in which a measurement has been taken | | | | | |
| | | |AMS Logistics Note: [Refer to ISO 31 standards for acceptable code values.] | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |EA Each | | | | | |
| |W1207 |235 |Product/Service ID Qualifier |C |ID |2/2 |Required | |
| | | |Description: Code identifying the type/source of the descriptive number used in | | | | | |
| | | |Product/Service ID (234). | | | | | |
| | | |AMS Logistics Note: [AMS Logistics Part Number.] | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |MG Manufacturer's Part Number | | | | | |
| |W1208 |234 |Product/Service ID |C |AN |1/40 |Required | |
| | | |Description: Identifying number for a product or service. | | | | | |
| | | |AMS Logistics Note: [Maximum application field length is 18 characters.] | | | | | |
|N9 |Reference Number |Pos: 040 Max: 2000 |
| | |Detail - Optional |
| | |Loop: 0300 Elements: 5 |
To transmit identifying numbers and descriptive information as specified by the reference number qualifier
Syntax:
1. N901 will contain ZZ to mark segment as custom. May not be typical of standard usage.
Semantics:
1. This segment may have up to 200 occurrences per product. Each segment represents a quantity of product within a carton. This segment is not normally used for standard TL/LTL loads; exceptions are made for those carrier shipments that use license plating for skids; in that case, each N9 Segment will represent a pallet ID. The quantity in the N905 field is representative of the quantity in the container for the reported product only; there may be other products in the same container.
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |N901 |128 |Reference Number Qualifier |M |ID |2/2 |Required | |
| | | |Description: Code qualifying the Reference Number. | | | | | |
| | | |AMS Logistics Note: | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |CT Carton / Package | | | | | |
| | | |EV Envelope | | | | | |
| | | |PT Pallet | | | | | |
| |N902 |127 |Reference Number |C |AN |1/30 |Required | |
| | | |Description: Reference number or identification number as defined for a particular| | | | | |
| | | |Transaction Set, or as specified by the Reference Number Qualifier. | | | | | |
| | | |AMS Logistics Note: [The carton or pallet Identifiers are placed here. | | | | | |
| | | |Identifiers conform to UCC standards.] | | | | | |
| N903 |127.2 | Reference Number Qualifier |C | ID |2/2 |Required | |
| | |Description: Code qualifying the Reference Number. | | | | | |
| | |AMS Logistics Note: | | | | | |
| | |Code Name | | | | | |
| | | | | | | | |
| | |SI Package Tracking Number | | | | | |
| N904 | 128.2 | Reference Number |C | AN |1/30 |Required | |
| | |Description: Reference number or identification number as defined for a | | | | | |
| | |particular Transaction Set, or as specified by the Reference Number Qualifier. | | | | | |
| | |AMS Logistics Note: [Package tracking number is place in this field. E.g. | | | | | |
| | |UPS, Federal Express]] | | | | | |
| N905 |127.3 |Quantity |C | N |1/8 |Required | |
| | |Description: Numeric value representing unit quantity | | | | | |
| | |AMS Logistics Note: [This is the quantity of units found in the package or on | | | | | |
| | |the pallet for a given product] | | | | | |
|N1 |Name |Pos: 080 Max: 5 |
| | |Detail - Optional |
| | |Loop: 0300 Elements: 2 |
To identify a party by type of organization, name and code
Comments:
1. This segment is used for those customers who are required to report country of origin. In some cases an MSDS may travel with the product; this segment would be used for such instances.
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |N101 |98 |Entity Identifier Code |M |ID |2/2 |Required | |
| | | |Description: Code identifying an organizational entity, a physical location, or an| | | | | |
| | | |individual | | | | | |
| | | |AMS Logistics Note: [CT - Country of Origin | | | | | |
| | | |Country of Origin for the product shipped. | | | | | |
| | | |Refer to ISO 3166-1 Country Codes for acceptable values.] | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |CT Country of Origin | | | | | |
| |N102 |93 |Name |C |AN |1/35 |Required | |
| | | |Description: Free-form name. | | | | | |
|W03 |Total Shipment Information |Pos: 010 Max: 1 |
| | |Summary - Optional |
| | |Loop: N/A Elements: 5 |
To provide totals relating to the shipment
• Note W03/06 represents total number of cartons shipped for the order
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |W0301 |382 |Number of Units Shipped |M |R |1/10 |Required | |
| | | |Description: Numeric value of units shipped in manufacturer's shipping units for a| | | | | |
| | | |line item or transaction set. | | | | | |
| | | |AMS Logistics Note: [Total number of units shipped.] | | | | | |
| |W0302 |81 |Weight |M |R2 |1/10 |Required | |
| | | |Description: Numeric value of weight. | | | | | |
| | | |AMS Logistics Note: [Total weight of units shipped.] | | | | | |
| |W0303 |355 |Unit or Basis for Measurement Code |M |ID |2/2 |Required | |
| | | |Description: Code specifying the units in which a value is being expressed, or | | | | | |
| | | |manner in which a measurement has been taken | | | | | |
| | | |AMS Logistics Note: [AMS reports weight in units of LBS. If your requirements | | | | | |
| | | |differ, please contact your client services representative.] | | | | | |
| |W0306 |80 |Lading Quantity |C |N0 |1/7 |Required | |
| | | |Description: Number of units (pieces) of the lading commodity. | | | | | |
| | | |AMS Logistics Note: [Contains the Shipped Cartons Quantity. If units shipped is | | | | | |
| | | |greater than zero, this field should be populated with a non-zero value. | | | | | |
| |W0307 |355 |Unit or Basis for Measurement Code |C |ID |2/2 |Required | |
| | | |Description: Code specifying the units in which a value is being expressed, or | | | | | |
| | | |manner in which a measurement has been taken | | | | | |
| | | |AMS Logistics Note: [Unit of measure for element W0306, Carton Count. Refer to | | | | | |
| | | |ISO 31 standards for acceptable code values.] | | | | | |
| | | |Code Name | | | | | |
| | | | | | | | | |
| | | |CT Carton | | | | | |
|SE |Transaction Set Trailer |Pos: 020 Max: 1 |
| | |Summary - Mandatory |
| | |Loop: N/A Elements: 2 |
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments).
Comments:
1. SE is the last segment of each transaction set.
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |SE01 |96 |Number of Included Segments |M |N0 |1/10 |Required | |
| | | |Description: Total number of segments included in a transaction set including ST | | | | | |
| | | |and SE segments. | | | | | |
| |SE02 |329 |Transaction Set Control Number |M |AN |4/9 |Required | |
| | | |Description: Identifying control number that must be unique within the transaction| | | | | |
| | | |set functional group assigned by the originator for a transaction set | | | | | |
|GE |Functional Group Trailer |Pos: Max: 1 |
| | |- Mandatory |
| | |Loop: N/A Elements: 2 |
To indicate the end of a functional group and to provide control information
Semantics:
1. The data interchange control number GE02 in this trailer must be identical to the same data element in the associated Functional Header GS06.
Comments:
1. The use of identical data interchange control numbers in the associated functional group header and trailer is designed to maximize functional group integrity. The control number is the same as that used in the corresponding header.
Element Summary:
| | Ref _ | Id_ | Element Name |Req |Type |Min/Max | Usage_ | |
| | | |_ | | | | | |
| |GE01 |97 |Number of Transaction Sets Included |M |N0 |1/6 |Required | |
| | | |Description: Total number of transaction sets included in the functional group or | | | | | |
| | | |interchange (transmission) group terminated by the trailer containing this data | | | | | |
| | | |element. | | | | | |
| |GE02 |28 |Group Control Number |M |N0 |1/9 |Required | |
| | | |Description: Assigned number originated and maintained by the sender. | | | | | |
945 Warehouse Shipping Advice X12 Example
ISA00 00 ZZISAID 01081466849
9911012339U003000000000010P
GSSWGSIDTURNKEY991101233911570001X003050
ST945000000001
W06F12345678919911020000033333
N1SF914040
G621199110219
NTEINV0000000.00
NTEPMTUSD
W27AZ412CC00
W101
W12CC22EAMG312-01080
N9BO0001
N9KK000001
N9LI000001
N9PC0002
N9PE4040
N9PGFPP_PROGR
N9SF4040
N1CTSG
W034838KG8CT
SE19000000001
GE10001
IEA1000000001
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.