Development of Pico-second Resolution Electronics for ...
Development of a Picosecond-Resolution TDC for Large Scale Time-of-Flight Systems
Timothy Credo, Henry Frisch, Harold Sanders and Fukun Tang
Enrico Fermi Institute, University of Chicago
Karen Byrum and Gary Drake
Argonne National Laboratory
Summary
Time measurements with picosecond (ps) resolution would benefit both fundamental high energy physics research and medical applications. We consider here the front-end chip for a system to readout a large-area array of micro-channel plate photomultipliers (MCP-PMT). Each MCP-PMT would have its own digitization electronics mounted directly on the back side of the tube. Figure 1 shows the block diagram for a front-end chip for a system with 1 ps resolution. The signal from the MCP-PMT is captured by a constant fraction discriminator (CFD) with very low time-walk (< 1 ps) to generate a “start” signal. The “stop” signal is generated by the output of a phase-locked loop (PLL) with jitter less than 1 ps that is driven from a global system clock.
[pic]
Fig (1): Proposed Picosecond Front-end Chip Block Diagram. The sub-blocks consist of a constant-fraction discriminator (CFD), a phase-locked loop (PLL), and a time-to-analog converter. The output is then fed to an analog-to-digital converter (A-to-D), described elsewhere.
The time-to-digital converter (TDC) includes two parts: a coarse TDC and a fine TDC. In a typical high energy physics application, the collider beam crossing clock would be the time reference. The coarse counter counts at a 2 GHz rate to allow a large dynamic range. The fine TDC generates the final sub-nanosecond portion with 1 ps resolution.
We have designed schematics for portions of the sub-blocks shown in Figure 1 using the new IHP SG25H2 process, which includes CMOS and very high frequency SiGe bipolar transistors,
Two types of time-to-analog converters have been simulated. The first is a Wilkinson time stretcher in which the time interval between the “start” and the “stop” signals has been stretched by a factor of 200. In this case the digitization would be done with a 5 GHz 10-bit counter, resulting in a least count of 1 ps.
The second design we have simulated is a time-to-amplitude converter (TAC) with a sensitivity of 1mV/ps. The maximum input time interval of 1ns will convert to a 1.0V voltage that is held in a capacitor. A 10-bit analog-to-digital converter would give a least count of 1 ps.
Based on preliminary simulation results using the toolkit for the SG25H2 process, both the Wilkinson time stretcher and the TAC approaches work well and could achieve a time resolution of ~1 ps.
The first chip submission will concentrate only on building a stable voltage control oscillator (VCO) and a zero-crossing voltage comparator. The VCO is a key component in construction of a low-jitter phase-locked loop. Building a fast zero-crossing voltage comparator will demonstrate that the low-walk constant-fraction discriminator can meet our requirements. We will describe both designs and the simulated performance.
-----------------------
MCP-PMT
CFD
2 GHz PLL
SYSCLK
Time-to-Analog
Conversion
Start
Stop
To A-to-D
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- us department of education default resolution group
- most popular electronics for 2019
- 2019 top electronics for kids
- top 10 electronics for 2019
- popular electronics for christmas 2019
- very cheap electronics for sale
- cool electronics for men
- electronics for dummies free download
- free electronics for deployed soldiers
- electronics for dummies pdf free
- basic electronics for beginners
- basic electronics for beginners pdf