Thapar Institute of Engineering and Technology



Mr. Anirban BhattacharyaDesignation : Assistant ProfessorEducationM.Tech. specialization Manufacturing Technology/ NIT Calicut (2003)B.Tech. in Mechanical Engineering (2001)Experience: Total Experience 11 yearsKalyani Government Engineering College, West Bengal from 4th April 2003 to 31st July 2006Thapar University Patiala from 2nd August 2006 till dateTeaching Interests: Manufacturing Processes, Manufacturing Technology, Machining Science (UG level)Welding Science, Metal Casting and Joining, Advanced Manufacturing Processes (PG level)Research Interest:Manufacturing technology, Incremental sheet metal forming, Rapid prototypingConventional machining, Grinding, Non-conventional machining, WeldingModeling and simulation of Manufacturing processes and systemsPublications:International JournalA Bhattacharya. ‘Experimental Investigation of Twist Drill Performance through Drill Flank Wear and Circularity Factor Measurement on Low Carbon Steel’. Manufacturing Technology & Research – An International Journal, Vol. 4, No. 3 & 4, 2008, pp. 68–74.A Bhattacharya, S Das, P Majumder, A Batish. ‘Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA’. International Journal of Production Engineering Research and Development, Vol. 3, Issue 1, 2009, pp. 31–40.K Patel, A Batish, A Bhattacharya. ‘Optimization of surface roughness in an end-milling operation using nested experimental design’. International Journal of Production Engineering Research and Development, Vol. 3, Issue 4-5, 2009, pp. 361–373. A Bhattacharya, A Sen, S Das. ‘An investigation on the anti-loosening characteristics of threaded fasteners under vibratory conditions’. Mechanism and Machine Theory (IF 1.214), Vol. 45, Issue 8, 2010, pp. 1215–1225.A Batish, A Bhattacharya, P Maddamsetty. ‘Fractional factorial analysis of lifting and carrying tasks on postural score to investigate the effect of contributing parameters and their interactions’. International Journal of Industrial and Systems Engineering, Vol. 6, No. 3, 2010, pp. 301–320.A Batish, A Bhattacharya, B Singh. ‘Multi-response optimization and empirical modeling of cardiopulmonary responses during manual lifting tasks’. Human Factors and Ergonomics in Manufacturing and Service Industries (IF 0.624), Vol. 21, No. 1, 2011, pp. 29–43.R Malhotra, A Bhattacharya, A Kumar, NV Reddy, J Cao. ‘A new methodology for multi-pass single point incremental forming with mixed tool paths’. CIRP Annals-Manufacturing Technology (IF 2.251), Vol. 60, Issue 1, 2011, pp. 323-326. P Kumar, A Batish, A Bhattacharya, RK Duvedi. ‘Effect of process parameters on microhardness and microstructure of heat affected zone in submerged arc welding’. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture (IF 0.77), Vol. 225, Issue 5, 2011, pp. 771-721.JM Kim, J Seo, A Batish, A Bhattacharya. ‘Effect of parameters in resistance micro-welding of stainless steel cross wire using fractional factorial experimental design’. International Journal of Manufacturing Research, Vol. 6, No. 3, 2011, pp. 290–303.A Bhattacharya, A Batish, G Singh. ‘Optimization of powder mixed electric discharge machining using dummy treated experimental design with analytic hierarchy process’. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 226, No. 1, 2012, pp. 103-116. A Batish, A Bhattacharya, V K Singla, G Singh. ‘Study of Material Transfer Mechanism in Die Steels using Powder Mixed EDM’. Materials and Manufacturing Processes (IF 1.297), Vol. 27, Issue 4, 2012, pp. 449-456.RP Singh, A Batish, T P Singh, A Bhattacharya. ‘An experimental study to evaluate the effect of ambient temperature during manual lifting and design of optimal task parameters’. Human Factors and Ergonomics in Manufacturing and Service Industries (IF 0.624), Vol. 24, Issue 1, 2014, pp. 54–70. A Bhattacharya, A Batish, M Singh. ‘Experimental studies to validate simulated results for nozzle effectiveness using Multi-response optimization during cylindrical grinding process’. International Journal of Materials Engineering Innovation, Vol. 3, Nos. 3/4, 2012, pp. 165-189. A Bhattacharya, A Batish, G Singh. ‘Surface modification of high carbon high chromium, en31 and hot die steel using powder mixed EDM process’. Materials Science Forum, Vol. 701, 2012, pp. 43-59. A Batish, A Bhattacharya. ‘Mechanism of material deposition from powder, electrode and dielectric for surface modification of H11and H13 die steels in EDM process’. Materials Science Forum, Vol. 701, 2012, pp. 61-75. A Bhattacharya, K Maneesh, NV Reddy, J Cao. ‘Formability and Surface Finish Studies in Single Point Incremental Forming’. Journal of Manufacturing Science and Engineering - Transactions of ASME (Impact Factor: 0.6), Vol. 133, Issue 6, 2011, pp. 061020-1 to 061020-8. A Bhattacharya, A Batish, G Singh, VK Singla. ‘Optimal parameter settings for rough and finish machining of die steels in powder mixed EDM’. International Journal of Advanced Manufacturing Technology (IF: 1.205), Vol. 61, No. 5-8, 2012, pp. 537-548. A Bhattacharya, A Batish, K Singh. ‘FE simulation and experimental validation of powder mixed EDM process for estimating the temperature distribution and volume removed in single crater’. International Journal of Modeling, Simulation and Scientific Computing, Vol. 3, Issue 2, 2012, DOI No:?10.1142/S1793962312500067.A Bhattacharya, A Batish. ‘Effect of process variables on microhardness, grain size and strain during machining of various die steels with PMEDM using dummy treated experimental design’. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture (IF: 0.725), Vol. 226, No. 7, 2012, pp. 1192-1204. A Bhattacharya, A Batish, N Kumar. ‘Surface characterization and material migration during surface modification of die steels with silicon, graphite and tungsten powder in EDM Process. Journal of Mechanical Science and Technology (IF: 0.616), Vol. 27, No. 1, 2013, pp. 133-140.A Bhattacharya, A Batish. Predictor equations for estimating crater dimensions in pmedm process using fem simulation and experimental validation. Materials Science Forum, Vol. 751, 2013, pp. 45-60. M Beltran,?R Malhotra,?A J Nelson, A Bhattacharya,?NV Reddy, J Cao. ‘Experimental study of failure modes and scaling effects in micro-incremental forming. Journal of Micro and Nano-Manufacturing (Transactions of ASME), Vol. 1, Issue 3, 2013, 031005-1–031005-15. H Singh, A Bhattacharya, A Batish. ‘Finite element modeling and analysis of powder mixed electric discharge machining process for temperature distribution and volume removal considering multiple craters’. International Journal of Modeling, Simulation and Scientific Computing, Vol. 5, No. 3, pp. 1450009-1 – 1450009-21.A Batish, A Bhattacharya, M Kaur, MS Cheema. ‘Hard Turning: Parametric Optimization using Genetic Algorithm for Rough/Finish Machining and Study of Surface Morphology’. Journal of Mechanical Science and Technology (IF: 0.616), Vol. 28, No. 5, 2014, pp. 1629-1640.A Bhattacharya, A Batish, G Bhatt. Material transfer mechanism during magnetic field assisted electric discharge machining of AISI D2, D3 and H13 die steel. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture (IF: 0.725), Available online since 14th March, 2014 (DOI: 10.1177/0954405414522797)A Bhattacharya, TK Bera. ‘Development of Automatic GMAW Setup for Process Improvements: Experimental and Modelling Approach’. Materials and Manufacturing Processes (IF: 1.297), Available online since 3rd March 2014, DOI: 10.1080/10426914.2014.892611A Gupta, SV Ramagopal, A Batish, A Bhattacharya. Surface roughness and profile error in precision diamond turning of C18000’. Materials and Manufacturing Processes (IF: 1.297), Vol. 29, No. 5, 2014, pp. 606-613. A Bhattacharya, TK Bera, VK Suri. ‘Influence of Heat Input in Automatic GMAW: Penetration Prediction and Microstructural Observation’. Materials and Manufacturing Processes (IF: 1.297), Accepted, May 14, 2014.National Journal: 04International Conference: 10National Conference: 08M.E/ M. Tech Thesis Supervision: 25 (completed) 03 (ongoing)Achievement, Awards and Recognitions:Selected as Teacher Fellow and recipient of Scholarship during M.Tech course under Early Faculty Induction Programme of AICTE, New Delhi. Visited Northwestern University, Evanston, Illinois, USA for collaborative research on Incremental Sheet Metal Forming (for 3 months) with funding and scholarship received from Indo-US Centre for Research Excellence in Fabrionics, New Delhi.Sponsored Research Projects:Implementation of research project entitled “Chain weight reduction” - Sponsored by Rockman Industries Ltd. (HeroHonda Group), A-7, Focal Point, Ludhiana – 141010, Punjab (Amount: Rs. 11.08 Lakhs)Analysis of metallurgical behavior of weld and heat affected zone during Submerged Arc Welding (SAW) of high strength low alloy (HSLA) steel for different flux compositions, weld parameters with pre and post thermal treatment Defence Research and Development Organization (DRDO), New Delhi, India (Amount: Rs. 14.65 Lakhs, with D. Ajay Batish)Experimental investigation for surface improvement of die steels during electric discharge machining with tungsten and titanium powder mixed dielectric, University Grants Commission (UGC), New Delhi, India (Rs. 0.9 Lakhs)Experimental investigation of EDM machined surface of Al-SiC and Al-SiC-B4C metal matrix composites, University Grants Commission (UGC), New Delhi, India (Rs. 10.82 Lakhs)Multi-response Optimization of Process Parameters for the Improved Part Accuracy in Fused Deposition Modeling Process, All India Council for Technical Education (AICTE), New Delhi, 9.75 LakhsMessage to Students & CommunityThe sincere and hardworking students are always welcome for their thesis work.Street: P.O. Box 32Postcode: 147004City: PatialaCountry: IndiaEmail: abhattacharya@thapar.edu Located in: Mechanical Engineering Department ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download