PEOPLE ARE YOUR MOST IMPORTANT ASSET



References for Handoff To The Future: Mapping Reliability Training, Parts I & II

By Heinz P. Bloch, P.E.

1. Systems Approach Strategies, (SAS, Tel. 905-430-8744, also Website )

2. Larkin, Michael, and Diane Shea-Larkin, “CARE-Energize your Company with Empathy,” (2000) Stoddard Publishing Company Ltd., Toronto, ON, Canada

3. Bloch, Heinz P., “Improving Machinery Reliability,” 3rd Edition (1998); Butterworth-Heinemann Publishing Company, Woburn, MA

4. Bloch, H.P, and Fred Geitner, “Introduction to Machinery Reliability Assessment,” 2nd Edition, (1993), Van Nostrand-Reinhold, New York, NY

5. Bloch, Heinz P., “Practical Guide to Compressor Technology,” 2nd Edition (2006) Wiley & Sons, Hoboken, NJ

6. Bloch, Heinz P., “Practical Guide to Steam Turbine Technology,” (1996) McGraw-Hill, New York, NY

7. Bloch, H.P. and John J. Hoefner, “Reciprocating Compressor Operation and Maintenance,” (1996) Butterworth-Heinemann Publishing Company,

Woburn, MA

8. Bloch, H.P. and Claire Soares, “Turboexpander Technology and Applications,” (2001) Butterworth-Heinemann Publishing Company, Woburn, MA

9. Bloch, H.P. and Fred Geitner, “Machinery Failure Analysis and Troubleshooting,” 4th Edition (2013), Elsevier Publishing Company, Oxford, UK, and Woburn, MA

10. Bloch, H.P., “Practical Lubrication for Industrial Facilities,” 2nd Edition (2009) Fairmont Press, Lilburn, Georgia

11. Eisenmann, Robert C. Sr. and Robert C. Eisenmann, Jr., ”Machinery Malfunction Diagnosis and Correction,” (1998) Prentice-Hall, Inc., Upper Saddle River, NJ

12. Dufour, John W. and W. Ed Nelson, “Centrifugal Pump Sourcebook,” (1992),

McGraw-Hill, New York, NY

Textbooks of Interest to Reliability Professionals

Bloch, Heinz P.: “Improving Machinery Reliability,” 3rd Edition, (1998), Gulf Publishing Company, Houston, TX, ISBN 0-88415-661-3

Bloch, H.P. and “Machinery Failure Analysis and Troubleshooting,” (1998), 4th Ed. Fred Fred Geitner Elsevier Publishing Company, Kidlington OX5 1GB, UK,

and Waltham, MA 02451; ISBN 978-0-12-386045-3

Bloch, H.P. and “Machinery Component Maintenance and Repair,” (2004), 3rd

Fred Geitner: Ed., Gulf Publishing Company, Houston, TX, ISBN 0-87201-781-8

Bloch, H.P. and “Major Process Equipment Maintenance and Repair,” (1997),

Fred Geitner: 2nd Ed., Gulf Publishing Company, Houston, TX, ISBN 0-88415-663

Bloch, H.P. and “Oil Mist Handbook: Practical Applications,” (1998), Fairmont Press,

Abdus Shamim: Lilburn, Georgia, ISBN 0-88173-256-7

Bloch, H.P. and “Process Plant Machinery,” 2nd Edition, (1998), Elsevier Publishing,

Claire Soares: New York and London, ISBN 0-7506-7081-9

Bloch, H.P. and “Reciprocating Compressors: Operation and Maintenance,” (1996),

J.J. Hoefner: Gulf Publishing Company, Houston, TX, ISBN 0-88415-525-0

Bloch, Heinz P.: “Practical Guide to Compressor Technology,” (2006), 2nd Ed., John Wiley & Sons, Hoboken, NJ, ISBN 0-471-72793-8 (Available also

in a Spanish Edition from McGraw-Hill)

Bloch, Heinz P.: “Practical Guide to Steam Turbine Technology,” (1995), McGraw-Hill, New York, NY, ISBN 0-07-005924-1 (Available also in a Spanish Ed.)

Bloch, Heinz P.: “Practical Lubrication for Industrial Facilities,” (2000), Fairmont Press, Lilburn, Georgia, ISBN 0-88173-296-6

Bloch, H.P. and “Turboexpanders and Process Applications,” (2001), Elsevier

Claire Soares: Publishing, New York and London, ISBN 0-88415-509-9

Bloch, H.P. and “Pump User’s Handbook: Life Extension,” (2013), 4th Edition,

Allan Budris: Fairmont Press, Lilburn, Georgia, ISBN 0-88173-627-9

Bloch, Heinz P. “Compressors and Modern Process Applications,” (2006), John and

and A. Godse: Wiley & Sons, Hoboken, NJ, ISBN 0-471-72792-X)

Bloch, H.P. and “Maximizing Machinery Uptime,” (2006), Gulf Publishing

Fred Geitner Company, Houston, Texas, ISBN 0-7506-7725-2

Bloch, Heinz P.: “Pump Wisdom: Problem Solving for Operators and Specialists, (2011) John Wiley & Sons, Hoboken, NJ; ISBN 9-781118-041239

Boyce, M.P.: “Gas Turbine Engineering Handbook,” (1982), Gulf Publishing Company, Houston, TX, ISBN 0-87201-878-4

Brown, R.N.: “Compressors, Selection and Sizing,” 2nd Edition, (1997), Gulf Publishing Company, Houston, TX ISBN 0-88415-164-6

Dufour, J.W. and “Centrifugal Pump Sourcebook,” (1993), McGraw-Hill, New York, J.E. Nelson: NY, ISBN 0-07-018033-4

Eisenmann, R.C. Sr. “Machinery Malfunction Diagnosis and Correction,” (1997),

& R.C. Eisenmann, Jr.: ISBN 0-13-240946-1

Forsthoffer, W. E.: “Forsthoffer’s Rotating Equipment Handbooks” (Set of 5), 2006, ISBN 1-856-17472-7, Elsevier Publishing, New York and London

Henshaw, T.L.: “Reciprocating Pumps,” (1987), Van Nostrand-Reinhold Publishing Company, New York, NY, ISBN 0-442-23251-9

Karassik, I.J. et al: “Pump Handbook,” 2nd Edition, (1986), McGraw-Hill, New York, NY, ISBN 0-07-033302-5,

Lobanoff, V.S. and “Centrifugal Pumps: Design and Application,” 2nd Edition, (1992),

R.R. Ross: Gulf Publishing Company, Houston, TX , ISBN 0-87201-200-X

Mitchell, John S.: “Physical Asset Management Handbook,” 4th Edition, (2006), Clarion Technical Publishing, Houston, TX, ISBN 0-971-7945-1-0

Neumaier, R.: “Hermetic Pumps”, 2nd Ed., (2000), Fairmont Press, Lilburn, Georgia, ISBN 3-929682-26-5

Sofronas, Anthony: “Analytical Troubleshooting of Process Machinery and Pressure Vessels—Including Real-World Case Studies” (2006), John Wiley & Sons, ISBN 0-471-73211-7

Sofronas, Anthony: “Case Histories in Vibration and Metal Fatigue” (2012),

John Wiley & Sons, ISBN 0-978-1-118-16946-9

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download