3M Bair Hugger | Multi-position warming blanket application steps

Normothermia System

Application Steps

3MTM Bair HuggerTM Multi-position upper body warming blanket - Model 62200

1. Place

Once surgical positioning is complete, place the blanket on the patient. The small holes should be in contact with the patient's skin.

2. Bend

Bend and conform the blanket on or around the patient to cover the greatest amount of skin surface area.

3. Remove

Remove adhesive strip backing.

4. Adhere

Adhere to patient in the desired location (adhesive strip toward surgical site).

5. Secure

Use tie strips to secure blanket if needed.

6. Unfold

Unfold the head drape and place over the intubated patient's head and neck.*

*Since the adhesive strip should always face the surgical site, the head drape is unable to be used in certain con gurations.

7. Connect

Connect hose to blanket using desired port (not over groin area).

8. Clamp

Use cord tether and clamp to secure hose.

9. In ate

Turn on the warming unit to in ate the blanket and begin therapy.

Final Beach Chair Application

3M Health Care Infection Prevention Division 2510 Conway Ave St. Paul, MN 55144 USA

Final Lateral Shoulder Application

Final Robotics Application

3M and BAIR HUGGER are trademarks of 3M Company, used under license in Canada. Please recycle. Printed in USA. ? 3M 2016. All rights reserved

70-9700-0098-3 10/16

See the product's Instructions for Use for warnings, cautions and other important information.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download