3.3.1: Mesh Analysis (25 points total)
3.3.1: Mesh Analysis (25 points total)center18288000In the space below, provide a schematic of the circuit, labeled with meshes and values for mesh currents as determined in the pre-lab. Provide estimates for the voltages V1 and V2, based on your mesh currents. (7 pts)In the space below, provide a schematic of the circuit being testing, including measured resistance values. (3 pts)Provide your measured values for the voltages V1 and V2. Provide a percent error between the measured and expected values of V1 and V2. Comment on any significant differences between the measured and expected values. (8 pts)DEMO: Have a teaching assistant initial this sheet, indicating that they have observed your circuits’ operation. (7 pts)TA Initials: _______ ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- laboratory manual for dc electrical circuits
- เทคนิคการวิเคราะห์วงจรด้วยวิธีโนดและวิธีลูป เมช
- nodal analysis lab
- circuit simulation with spice auburn university
- 3 3 1 mesh analysis 25 points total
- calculators in circuit analysis ed thelen
- course no and name cse167 eee 147 circuit
- steps for the method of nodal analysis
- جامعة بابل university of babylon
- iq