ADVANCED HIGH CEILING Signum 16 - Emergency Pack - METEOR LIGHTING

Installation Instructions

ADVANCED HIGH CEILING

Signum 16 - Emergency Pack

Surface Mount ( 0-10V )

Remote Emergency Pack

Junction Box (Not included)

Emergency Battery (Indoor only)

Mounting Bracket

Black(Line) White(Neutral) Green(Ground)

0-10V Dimmer

Violet(+) Pink/Gray(-)

Wiring Diagram

Junction Box

Black(Line) White(Neutral) Green(Ground)

LED Fixture

Violet(+) Pink/Gray(-)

Black (-) Yellow (+)

EMP YEL/BLACK (-)

EMP YEL (+)

EMP 20W BSL20B2UEK55C1I1

ATTENTION

Do not press the test switch button.

Un-switchable AC source To detect AC power outage

Black(Line) White(Neutral)

YEL/BLACK(-) WHT/RED BLUE WHT/BLACK

Test method

Disconnect the AC power of the LED fixture and EMP. The LED Fixture should be lit by EMP.

METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 meteor-

2019 V1.0 | Page 1 of 6

*METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.

Installation Instructions

ADVANCED HIGH CEILING

Signum 16 - Emergency Pack

Surface Mount ( DMX /) LTE / LDE1 )

Remote Emergency Pack

Junction Box (Not included)

Emergency Battery (Indoor only)

Mounting Bracket

Black(Line) White(Neutral) Green(Ground)

Wiring Diagram Junction Box

Black(Line) White(Neutral) Green(Ground)

LED Fixture

Black (-) Yellow (+)

EMP YEL/BLACK (-)

EMP YEL (+)

EMP 20W BSL20B2UEK55C1I1

ATTENTION

Do not press the test switch button.

Un-switchable AC source Black(Line) To detect AC power outage

White(Neutral)

YEL/BLACK(-) WHT/RED BLUE WHT/BLACK

Test method

Disconnect the AC power of the LED fixture and EMP. The LED Fixture should be lit by EMP.

METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 meteor-

2019 V1.0 | Page 2 of 6

*METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.

Installation Instructions

ADVANCED HIGH CEILING

Signum 16 - Emergency Pack

AD10 / Stem ( 0-10V )

Remote Emergency Pack

Junction Box (Not included)

Emergency Battery (Indoor only)

Stem

Wiring Diagram

Black(Line) White(Neutral) Green(Ground)

0-10V Dimmer

Violet(+) Pink/Gray(-)

Junction Box

Cable

Red EMP Gray/White(-)

EMP Violet/White(+)

EMP YEL/BLACK (-)

EMP YEL (+)

Black(Line) White(Neutral) Green(Ground)

LED Fixture

Violet(+) Pink/Gray(-)

Black (-) Yellow (+)

EMP 20W BSL20B2UEK55C1I1

ATTENTION

Do not press the test switch button.

Un-switchable AC source To detect AC power outage

Black(Line) White(Neutral)

YEL/BLACK(-) WHT/RED BLUE WHT/BLACK

Test method

Disconnect the AC power of the LED fixture and EMP. The LED Fixture should be lit by EMP.

METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 meteor-

2019 V1.0 | Page 3 of 6

*METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.

Installation Instructions

ADVANCED HIGH CEILING

Signum 16 - Emergency Pack

AD10 / Stem ( DMX )/ LTE / LDE1 )

Remote Emergency Pack

Junction Box (Not included)

Emergency Battery (Indoor only)

Stem

Black(Line) White(Neutral) Green(Ground)

Wiring Diagram

Junction Box

Cable

Red Pink/Gray

Violet

EMP Pink/Gray(-)

EMP Violet(+)

Black(Line) White(Neutral) Green(Ground)

LED Fixture

Black (-) Yellow (+)

EMP YEL/BLACK (-)

EMP YEL (+)

EMP 20W BSL20B2UEK55C1I1

ATTENTION

Do not press the test switch button.

Un-switchable AC source To detect AC power outage

Black(Line) White(Neutral)

YEL/BLACK(-) WHT/RED BLUE WHT/BLACK

Test method

Disconnect the AC power of the LED fixture and EMP. The LED Fixture should be lit by EMP.

METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 meteor-

2019 V1.0 | Page 4 of 6

*METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.

BSL07/13/14/20

Installation Instructions

Self-Testing Emergency LED Driver

WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

1. This product is for use with an emergency LED lighting load in compliance with NFPA-101 and NEC 700.12. See table on Page 2 for product ratings.

2. Make sure all connections are in accordance with the National Electrical Code or Canadian Electrical Code and any local regulations.

3. To reduce the risk of electric shock, disconnect both normal and emergency power supplies before servicing. Follow the instructions in the OPERATIONS section to disable the output of this LED driver.

4. This emergency driver is intended to be mounted on or enclosed within a luminaire and is suitable for both eld installation. Emergency driver with separate battery is intended to be enclosed within a

Determine Suitability" on Page 2 of these instructions. 5. This product is suitable for use in damp locations product is also suitable for installation in sealed and

xtures. Product is not suitable for heated air outlets, outdoors, wet, or hazardous locations. Maximum allowable case temp is 65?C. See the unit label for Tcase measurement location. See Page 2 for rated ambient temperature ranges. 6. An unswitched AC power source is required (120-277 VAC, 50/60 Hz). 7. Do not install near gas or electric heaters.

eld replaceable. Contact the manufacturer for information on service. 9. The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition. 10. Do not use this product for other than intended use.

ed personnel. 12. Equipment should be mounted in locations and at heights where it will not be subjected to tampering by

unauthorized personnel. 13. For Canadian application the output terminals should be in compliance with the accessibility requirement of

the Canadian Electric Code. 14. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. 15. This product must be grounded. See the wiring diagrams for details.

THIS PRODUCT CONTAINS A RECHARGEABLE LITHIUM-ION BATTERY. THE BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.

METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 meteor-

2019 V1.0 | Page 5 of 6

*METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download