Scienceprojectchennai



AUTOMOBILE BASED PROJECTS

|AU001 |Numerical analysis and experimental validation of a single cylinder diesel engine with |[ Request for Synopsis ] |

| |double injection | |

|AU002 |Vehicle safety speed controller under driver fatigue using Eye blink sensor |[ Request for Synopsis ] |

|AU003 |Increasing the volumetric efficiency of four stroke engine by using ATEG |[ Request for Synopsis ] |

|AU004 |Fabrication of pneumatic Scooter excavator |[ Request for Synopsis ] |

|AU005 |Active brake torque vectoring in differential unit |[ Request for Synopsis ] |

|AU006 |Fabrication of Smart trike - tilting three wheeler |[ Request for Synopsis ] |

|AU007 |Fabrication of Pulse jet engine (Model) |[ Request for Synopsis ] |

|AU008 |Tilting three wheeler with a hybrid system |[ Request for Synopsis ] |

|AU009 |Fuel efficiency improvement by using Acetylene powered engine |[ Request for Synopsis ] |

|AU010 |Pneumatic controlled steps in bus with break locking system |[ Request for Synopsis ] |

|AU011 |Hydraulic hybrid system for four wheeler |[ Request for Synopsis ] |

|AU012 |Fabrication of Engine Drive Cycle |[ Request for Synopsis ] |

|AU013 |Magneto Hydro Dynamic(MHD) braking system |[ Request for Synopsis ] |

|AU014 |Exhaust gas recirculation system (EGR) for two wheeler |[ Request for Synopsis ] |

|AU015 |Generation of electricity using the flow or velocity of Vehicle exhaust gas |[ Request for Synopsis ] |

|AU016 |Steer-by-wire system for cars |[ Request for Synopsis ] |

|AU017 |Fabrication of Methane gas Engine |[ Request for Synopsis ] |

|AU018 |Solar E-bike with regenerative braking system |[ Request for Synopsis ] |

|AU019 |Eye blink sensor based automatic breaking and bumper system |[ Request for Synopsis ] |

|AU020 |Rear wheel steering for trailer truck |[ Request for Synopsis ] |

|AU021 |Automatic safety systems for railway coaches |[ Request for Synopsis ] |

|AU022 |Fabrication of All Terrain Wheel Chair |[ Request for Synopsis ] |

|AU023 |Bio gas two wheeler with power generation |[ Request for Synopsis ] |

|AU024 |Dual Brake Single liver System for two wheeler |[ Request for Synopsis ] |

|AU025 |Neodymium magnetic shock absorber |[ Request for Synopsis ] |

|AU026 |MHD power generation for two wheeler |[ Request for Synopsis ] |

|AU027 |Touch screen based automatic gear shifting system |[ Request for Synopsis ] |

|AU028 |Automatic Reverse locking system using differential unit |[ Request for Synopsis ] |

|AU029 |Fabrication of Segway (Running model) |[ Request for Synopsis ] |

|AU030 |Introduction of HHO gas in turbojet engine |[ Request for Synopsis ] |

|AU031 |Water fuel engine with power generation |[ Request for Synopsis ] |

|AU032 |Pneumatic actuator for gear shifting in two wheeler |[ Request for Synopsis ] |

|AU033 |Modified Reverse gear two wheeler for handicapped people |[ Request for Synopsis ] |

|AU034 |Efficiency increasing system by using preheating method |[ Request for Synopsis ] |

|AU035 |Automatic brake in hill station |[ Request for Synopsis ] |

|AU036 |Integrated drunk and drive prevention system |[ Request for Synopsis ] |

|AU037 |Fabrication of Variable volume engine |[ Request for Synopsis ] |

|AU038 |Automatic speed breaker for preventing accident in school zone |[ Request for Synopsis ] |

|AU039 |Fabrication of Ethanol fuel engine |[ Request for Synopsis ] |

|AU040 |Automatic pneumatic bumper and break actuation before collision |[ Request for Synopsis ] |

|AU041 |Fabrication of Four bar cycle drive mechanism |[ Request for Synopsis ] |

|AU042 |High efficient cooling system in a car with help of BLDC motor |[ Request for Synopsis ] |

|AU043 |Automatic parking and breaking system |[ Request for Synopsis ] |

|AU044 |Power generation from road transport using piezoelectric and rack & pinion |[ Request for Synopsis ] |

|AU045 |Hybrid vehicle with regenerative breaking motor cycle |[ Request for Synopsis ] |

|AU046 |combination of emergency, intelligence and anti-lock braking system |[ Request for Synopsis ] |

|AU047 |Digital Fuel Level with expected Millage indicator |[ Request for Synopsis ] |

|AU048 |Over speed indication and Automatic accident Avoiding System for four wheeler |[ Request for Synopsis ] |

|AU049 |Shock observer power generation system |[ Request for Synopsis ] |

|AU050 |Automatic clutch and brake system for four wheeler |[ Request for Synopsis ] |

|AU051 |Automatic pneumatic disc braking system |[ Request for Synopsis ] |

|AU052 |Fuel Efficiency improvement in petrol Engine by using Water injection |[ Request for Synopsis ] |

|AU053 |Fabrication of Eddy current braking system |[ Request for Synopsis ] |

|AU054 |Fabrication of Solar Hybrid Car |[ Request for Synopsis ] |

|AU055 |Viability of used sunflower oil as a substitute for diesel Engine |[ Request for Synopsis ] |

|AU056 |Air Engine with load testing (Dynamo Meter) Arrangement |[ Request for Synopsis ] |

|AU057 |Fabrication of Buggy with solar hybrid vehicle |[ Request for Synopsis ] |

|AU058 |Two Engine Synchronization for Four Wheeler |[ Request for Synopsis ] |

|AU059 |Pneumatic powered Tricycle |[ Request for Synopsis ] |

|AU060 |Intelligent Active Suspension system for two wheeler |[ Request for Synopsis ] |

|AU061 |Fabrication of Center stand for cycle |[ Request for Synopsis ] |

|AU062 |Remote controlled tilting handicapped wheel chair |[ Request for Synopsis ] |

|AU063 |Automatic Visitor Guided with material handling Vehicle |[ Request for Synopsis ] |

|AU064 |Fabrication of Automatic hand break Release |[ Request for Synopsis ] |

|AU065 |Fabrication of Air engine |[ Request for Synopsis ] |

|AU066 |Pneumatic Disc Braking System (PDBS) |[ Request for Synopsis ] |

|AU067 |Automatic Electro-Magnetic gear transmission for two wheeler |[ Request for Synopsis ] |

|AU068 |Fabrication of Anti theft steering system |[ Request for Synopsis ] |

|AU069 |Remote controlled scissor jack |[ Request for Synopsis ] |

|AU070 |Anti dazzling head light for two wheeler |[ Request for Synopsis ] |

|AU071 |Fabrication of Mini Jet Engine |[ Request for Synopsis ] |

|AU072 |Piezo electric power generating shock absorber |[ Request for Synopsis ] |

|AU073 |Sensor Operated Automatic Reverse Braking System |[ Request for Synopsis ] |

|AU074 |Heating and cooling jacket by using peltier effect |[ Request for Synopsis ] |

|AU075 |Automatic gear changer in bicycle |[ Request for Synopsis ] |

|AU076 |Brake show monitoring system |[ Request for Synopsis ] |

|AU077 |Hydraulic Break show riveting Machine |[ Request for Synopsis ] |

|AU078 |90 degree turning steering mechanism |[ Request for Synopsis ] |

|AU079 |Automatic pneumatic vulcanizing Machine |[ Request for Synopsis ] |

|AU080 |Fabrication of Motor bike with propeller shaft |[ Request for Synopsis ] |

|AU081 |Fabrication of Direct drive wheel |[ Request for Synopsis ] |

|AU082 |Fabrication of Hybrid driving seat |[ Request for Synopsis ] |

|AU083 |Automatic side stands with breaking locking system |[ Request for Synopsis ] |

|AU084 |Foldable Electric GoPed Two wheeler |[ Request for Synopsis ] |

|AU085 |Electronic assisted hydraulic braking system |[ Request for Synopsis ] |

|AU086 |Efficient Car Parking System for four wheeler |[ Request for Synopsis ] |

|AU087 |Fabrication of tyre pressure monitoring system |[ Request for Synopsis ] |

|AU088 |Electro-Hydraulic Braking (EHB) system for Four Wheeler |[ Request for Synopsis ] |

|AU089 |Hydraulic lifting system for four wheeler |[ Request for Synopsis ] |

|AU090 |Three axis pneumatic modern trailer |[ Request for Synopsis ] |

|AU091 |Electro-Magnetic braking System for Automobile |[ Request for Synopsis ] |

|AU092 |Fabrication of Electrical Steering Mechanism |[ Request for Synopsis ] |

|AU093 |Shock Absorber test rig using Cam and Sensors |[ Request for Synopsis ] |

|AU094 |Regenerative braking using pneumatic interface |[ Request for Synopsis ] |

|AU095 |Fabrication of Indoor electric scooter |[ Request for Synopsis ] |

|AU096 |Electro-Hydraulic System for Automation in Four Wheeler |[ Request for Synopsis ] |

|AU097 |Intelligent Braking System in Four Wheeler (IBS) |[ Request for Synopsis ] |

|AU098 |Fabrication of Multiple Car safety system in bumper |[ Request for Synopsis ] |

|AU099 |Multi Nut (Wheel) Tightener cum Loosener |[ Request for Synopsis ] |

|AU100 |Fabrication of weighing bridge in moving vehicle |[ Request for Synopsis ] |

|AU101 |Fuel efficiency increasing system by using peltier Air preheated system |[ Request for Synopsis ] |

|AU102 |Electro-magnetic actuator in ABS for two wheeler |[ Request for Synopsis ] |

|AU103 |Emergency Braking System in Four Wheeler (EBS) |[ Request for Synopsis ] |

|AU104 |Hub center steering system for two wheeler |[ Request for Synopsis ] |

|AU105 |Automatic Distance Measurement and Braking System By using Ultrasonic Waves |[ Request for Synopsis ] |

|AU106 |Fabrication of Electric all terrain vehicle |[ Request for Synopsis ] |

|AU107 |Automatic Railway Gate Controller |[ Request for Synopsis ] |

|AU108 |Fabrication of Chain tightener |[ Request for Synopsis ] |

|AU109 |Intelligent secure and privacy parking through IR sensor |[ Request for Synopsis ] |

|AU110 |Electrical energy can be produced by using vibration |[ Request for Synopsis ] |

|AU111 |Fabrication of Fuel Injector testing equipment |[ Request for Synopsis ] |

|AU112 |Wireless tyre pressure monitoring system |[ Request for Synopsis ] |

|AU113 |Vehicle Accident information through SMS |[ Request for Synopsis ] |

|AU114 |Automatic acceleration control in traffic signal |[ Request for Synopsis ] |

|AU115 |Highways High Speed Sensing and Automatic Speed Braking System |[ Request for Synopsis ] |

|AU116 |Two Wheeler Automation with security System |[ Request for Synopsis ] |

|AU117 |Fabrication of Automatic pneumatic jack |[ Request for Synopsis ] |

|AU118 |Four wheel steering (Zero degree) system |[ Request for Synopsis ] |

|AU119 |Emission control in two stroke petrol engine by using multiple spark |[ Request for Synopsis ] |

|AU120 |Electrical Power generation and refrigeration by using waste heat from IC engine |[ Request for Synopsis ] |

|AU121 |Manual operating spoiler in a vehicle |[ Request for Synopsis ] |

|AU122 |Fabrication of Auto clutch for Automobile |[ Request for Synopsis ] |

|AU123 |Automatic Rain operated wiper and Head light Dim/Bright Controller |[ Request for Synopsis ] |

|AU124 |Wheel chair cum stretcher model in hospital application |[ Request for Synopsis ] |

|AU125 |Electric Pulse Magnetic Braking (EPM Braking) System |[ Request for Synopsis ] |

|AU126 |Automatic temperature controller with cooling system for car |[ Request for Synopsis ] |

|AU127 |Electronic Fuel Injection (EFI) system for Two wheeler |[ Request for Synopsis ] |

|AU128 |Automatic turbo charger at low and high speed of vehicle |[ Request for Synopsis ] |

|AU129 |Fabrication of Fully Automated Intelligent Vehicle |[ Request for Synopsis ] |

|AU130 |Anti-Lock Braking System In Four wheeler (ABS) |[ Request for Synopsis ] |

|AU131 |Magnetically Levitated Train/Flight |[ Request for Synopsis ] |

|AU132 |Prevention kit for driving two wheeler without helmet |[ Request for Synopsis ] |

|AU133 |Fabrication of black box in automobile |[ Request for Synopsis ] |

|AU134 |Fabrication of Solar Race Car |[ Request for Synopsis ] |

|AU135 |GoPed Drive (GoPed Scooter) |[ Request for Synopsis ] |

|AU136 |Vehicle ignition using RFID and finger print |[ Request for Synopsis ] |

|AU137 |Compressed air production using vehicle suspensor |[ Request for Synopsis ] |

|AU138 |Automatic Electro-magnetic Clutch |[ Request for Synopsis ] |

|AU139 |Fabrication of Foldable two wheeler |[ Request for Synopsis ] |

|AU140 |Fabrication of Kids Car |[ Request for Synopsis ] |

|AU141 |Fabrication of brown gas Engine |[ Request for Synopsis ] |

|AU142 |Automatic Track Guided Vehicle (ATGV) |[ Request for Synopsis ] |

|AU143 |Automatic tyre pressure inflation system |[ Request for Synopsis ] |

|AU144 |Automatic Vehicle Accident Information System |[ Request for Synopsis ] |

|AU145 |Queries controlling system for two wheeler |[ Request for Synopsis ] |

|AU146 |Experimental investigation of an air conditioning system drive by Engine |[ Request for Synopsis ] |

|AU147 |Joystick control car drive mechanism for physically challenged people |[ Request for Synopsis ] |

|AU148 |Automatic drunken drive avoiding with helmet locking system |[ Request for Synopsis ] |

|AU149 |Automatic Vehicle Accident prevention system |[ Request for Synopsis ] |

|AU150 |Fabrication of Hydrogen Engine with load test |[ Request for Synopsis ] |

|AU151 |Turbo jet engine with active magnetic bearing |[ Request for Synopsis ] |

|AU152 |Fabrication of Active wheel |[ Request for Synopsis ] |

|AU153 |Wheel chair using Eye shadow and touch screen |[ Request for Synopsis ] |

|AU154 |Fabrication of Hydraulic vehicle turn table |[ Request for Synopsis ] |

|AU155 |Automatic Differential Unit locking system |[ Request for Synopsis ] |

|AU156 |Automatic head light dim and bright controller with engine overheating alarm |[ Request for Synopsis ] |

|AU157 |Fabrication of Wind Energy Vehicle |[ Request for Synopsis ] |

|AU158 |Automated Guided Vehicle (AGV) |[ Request for Synopsis ] |

|AU159 |Automatic steering control system for automobile |[ Request for Synopsis ] |

|AU160 |Sterling engine with parabolic collector (Model) |[ Request for Synopsis ] |

|AU161 |Quick lifting jack with Gear Arrangement |[ Request for Synopsis ] |

|AU162 |Automatic head lamp alignment system with Dim/Bright Controller |[ Request for Synopsis ] |

|AU163 |Automatic Electro-Hydraulic Jack for Four Wheeler |[ Request for Synopsis ] |

|AU164 |Fabrication of Electric Gear Bike |[ Request for Synopsis ] |

|AU165 |Remote controlled scrap collecting vehicle |[ Request for Synopsis ] |

|AU166 |Fabrication of turbo charger for two wheeler |[ Request for Synopsis ] |

|AU167 |Fabrication of Electro-magnetic Engine |[ Request for Synopsis ] |

|AU168 |Automatic Vehicle Over speed controlling system for School Zone |[ Request for Synopsis ] |

|AU169 |Dual power generation system for Automobile (thermoelectric + exhaust gas power |[ Request for Synopsis ] |

| |generation) | |

|AU170 |Button operated electro-magnetic gear shifting system for two wheeler |[ Request for Synopsis ] |

|AU171 |Automatic pneumatic bumper for four wheeler |[ Request for Synopsis ] |

|AU172 |Triangular air Compressor with Common Compression Chamber |[ Request for Synopsis ] |

|AU173 |Automatic Break Failure indicator and Engine Over Heating Alarm |[ Request for Synopsis ] |

|AU174 |Digital locking (Fuel, ignition) system (Password) for Two wheeler |[ Request for Synopsis ] |

|AU175 |Automatic Magnetic Accident preventer for Train |[ Request for Synopsis ] |

|AU176 |Hydraulic Cylinder Liner Puller |[ Request for Synopsis ] |

|AU177 |Catalytic converter for Automobile |[ Request for Synopsis ] |

|AU178 |Exhaust gas heat recovery (TEG) power generation system |[ Request for Synopsis ] |

|AU179 |Fabrication Automatic lawn mover |[ Request for Synopsis ] |

|AU180 |Fabrication of Aerodynamic design for buses |[ Request for Synopsis ] |

|AU181 |Elimination of chain drive in by-cycle |[ Request for Synopsis ] |

|AU182 |Highways Speed controller and automatic Pneumatic Braking System |[ Request for Synopsis ] |

|AU183 |Fabrication of LPG Gas kit for Four Wheeler |[ Request for Synopsis ] |

|AU184 |Fabrication of Sand Collecting Vehicle | |

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download