2010 C&MS .us



700 MATERIAL DETAILS700 MINIMUM REQUIREMENTS FOR SAMPLING MATERIALSSpec No.MaterialMaterial only Inspection XE "Inspection" or Sampling RequirementsPost Inspection XE "Inspection" Instructions203Embankment XE "Embankment" XE "Compaction: Embankment" Assure 203.02 Q and R materials conform to the individual material requirements. Sample materials when requested by the Engineer XE "Authority of: Engineer" .Follow S 1015 for acceptanceSoil XE "Soil" Embankment XE "Embankment" XE "Compaction: Embankment" : 50 lb (23 kg)Granular Embankment XE "Embankment" : XE "Compaction: Embankment" 50 lb (23 kg)258Dowel Bar RetrofitSilicone SealantDowel Bar grout301302Asphalt XE "Concrete: Asphalt" Concrete XE "Concrete" Base XE "Base" Project: Visually inspect delivered loads and newly placed matPlant: Test 1 sample in 4 days for verification. Observe other contractor QC sample and QC test 1 in 4 days.Plant: Conduct minimum monitoring requirements.Project: Contact project Engineer XE "Authority of: Engineer" / DCE/DET immediately if problems are seenPlant: Compare results per 403. Report on monitoring.305PC Concrete XE "Concrete" Pavement XE "Pavement" XE "Concrete: Pavement" Make two 6"x6"x4' beams for every 7500 yd? (6500 m?) or fraction thereof daily. Field test beams for required load for the specification.Report results in CMS.Core samples taken every 2000 sq. yds by Contractor. XE "Contractor: Definition" Conform to S 1064 306Cement XE "Cement" Treated Free Draining Base XE "Base" Report mix design and verification to Lab. Conform to S 1090 when determining compactionDetermine locations for thickness tolerance checks according to S 1064. 307Non Stabilized Drainage Base XE "Base" Provide samples conforming to 703.12 for design verification. Provide in process samples as directed by the Engineer. XE "Authority of: Engineer" Sample material conforming to 703.12Determine locations for thickness tolerance checks according to S 1064. 308Asphalt XE "Concrete: Asphalt" Treated Free Draining Base XE "Base" Provide a JMF to the Lab for approval. Include 1 gal (4 L) sample of asphalt and 70 lb (32 kg) sample of aggregateDetermine locations for thickness tolerance checks according to S 1064. 409Sawing and Sealing Asphalt XE "Concrete: Asphalt" Concrete XE "Concrete" pavement JointsAssure backer rod is on QPL at the time of use.Inspect material for condition.Document in CMS.Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District testing and OMM421Micro SurfacingProject: Conduct a test strip per 421.09, inspect per 421.10 and accept per 421.11.422Chip Seal with Polymer BinderProject: Conduct a test strip per 422.05. Clean the surface per 422.06. Verify binder and aggregate application per 422.07 and 422.08. Ensure contractor quality control per 422.10. Verify all of 422.11 is met for acceptance.423Fibers for Asphalt XE "Concrete: Asphalt" Concrete XE "Concrete" :Polyester XE "Pavement Markings: Polyester" PropylenePolyproplyleneVerify type and brand name of material is on QPL at the time of use. Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use submit a use a 1 quart sample to the Laboratory.424Asphalt XE "Concrete: Asphalt" Concrete XE "Concrete" (Fine Graded Polymer)For Type A see 301,302 procedures. For Type B see 448 procedures.442 Asphalt XE "Concrete: Asphalt" Concrete XE "Concrete" Project and Plant: See requirements for 446 or 448 as specified for the 442 item.Plant: 1 per week have contractor take 2 1-quart samples, label and hold.443Asphalt XE "Concrete: Asphalt" Concrete XE "Concrete" (Stone Mastic)See 446 requirements.446Asphalt XE "Concrete: Asphalt" Concrete XE "Concrete" Project: Visually inspect delivered loads and newly placed matProject: Obtain daily mix sample for District test unless otherwise directed by the DET.Project: Obtain 10 cores for each lot (day) within 48 hours for District test. Locate cores for sampling. Project: See 702.04 or 702.13 for tack sample.Plant: Conduct minimum monitoring requirements.Plant: See 702.01 for PG binder sampleProject: Contact project Engineer XE "Authority of: Engineer" / monitoring team immediately if problems seen.Project: Observe proper handling and quick delivery of the mix sample. Place cores in box flat side down, do not stack boxes, do not leave in weather, deliver to lab promptly.Plant: Report on monitoring.448Asphalt XE "Concrete: Asphalt" Concrete XE "Concrete" Project: Visually inspect delivered loads and newly placed matProject: Give lot sample location to the District monitoring team unless otherwise directed by the DET.Project: See 702.04 or 702.13 for tack sample.Plant: Conduct minimum monitoring requirements.Plant: See 702.01 for PG binder sampleProject: Contact project Engineer XE "Authority of: Engineer" /monitoring team immediately if problems seen.Plant: Report on monitoring.451PC Concrete XE "Concrete" Pavement XE "Pavement" XE "Concrete: Pavement" Make two 6"x6"x4' beams for every 7500 yd? (6500 m?) or fraction thereof daily. Field test beams for required load for the specification.Report results in CMS.Core samples taken every 2000 sq. yds by Contractor. XE "Contractor: Definition" Conform to S 1064 451.08.BDowel Bond Breaking MaterialCheck new light form oil by labels on new cans. No sampling required Report material as not approved and follow policy for non specification materials 452PC Concrete XE "Concrete" Pavement XE "Pavement" XE "Concrete: Pavement" Make two 6"x6"x4' beams for every 7500 yd? (6500 m?) or fraction thereof daily. Field test beams for required load for the specification.Report results in CMS.Core samples taken every 2000 sq. yds by Contractor. XE "Contractor: Definition" Conform to S 1064 499.02WaterPotable water is satisfactory.If question about water quality, obtain 1 gallon sample.Document in CMS.Notify District Testing if water appears to contain sewage, oil, acid, or other matter. 503.09Excavation XE "Excavation" for Structures XE "Backfill: Structures" XE "Anchor bolts: Structures" Backfill XE "Backfill" Sampled only when requested by the Engineer XE "Authority of: Engineer" per Section 203Soil XE "Soil" Embankment XE "Embankment" XE "Compaction: Embankment" : 50 lb (23 kg)Granular Embankment XE "Embankment" : XE "Compaction: Embankment" 50 lb (23 kg)504Sheet Piling Left in PlaceUse 711.03 materials 507.03Bearing XE "Bolts: Bearing" Piles XE "Pile" Steel XE "Castings: Steel" Pile XE "Pile" PointsOnly use points from suppliers on the approved list incorporated into the project plans.Document in CMS as needed.Notify District Testing if material non-performs or looks defective during use. Notify the contractor with non-compliance issues.509.08Reinforcing Steel XE "Castings: Steel" - Plastic support chairsAssure plastic supports conform to supplement 1125511Concrete XE "Concrete" for Structures XE "Backfill: Structures" XE "Anchor bolts: Structures" Make two 6"x12" cylinders for spans over 20 ft each day, each 200 yd?.For spans 20 ft span and under, make two 6"x12" cylinders each 50 yd? or less.Document in CMS.Field or Standard Cure according to ACI/ODOT specifications.Within 24 to 48 hours after sampling, ship cylinders to Laboratory with required documentation.515.15Prestressed XE "Concrete: Prestressed" Concrete XE "Concrete" Bridge XE "Bridge" Members -Corrosion InhibitorsVerify manufacturer is on Approved List maintained by OMM. Document in CMS.526Approach SlabsMake two 6"x12" cylinders for each day, each 200 yd?.Document in CMS.Field or Standard Cure according to ACI/ODOT specifications.Within 24 to 48 hours after sampling, ship cylinders to Laboratory with required documentation.601.11Tied Concrete XE "Concrete" Block Mats(Slope/Channel Protection)Verify company and brand name of material is on QPL at the time of use. Inspect material for condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use submit a representative qty of defective material to the Laboratory.603.02External Sealing Bands Joint XE "Joint" WrapVerify company and brand name of material is on QPL at the time of use. Inspect material for condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use submit a representative qty of defective material to the OMM.609.02Curbing, XE "Curb" Concrete XE "Concrete" Medians, and Traffic XE "Traffic" Islands - Stone CurbsContact District Testing and OMM Aggregate XE "Aggregate" Section to assure stone curb conforms to requirements of 609.02610Cellular Retaining Walls610.04.A Cellular Products will be supplied by a source on the Certified Lists for S-1073 maintained by OMM.Received with TE-24.Check dimension, condition and compliance with approved drawings.Document in CMS.610.04.B Cellular Products assure documentation is complete and approved by Lab.Notify District Testing if rejecting material. If material non-performs or looks defective during use SEQ CHAPTER \h \r 1notify District Testing and OMM.613Low Strength Mortar XE "Mortar" Backfill XE "Backfill" Supplier to perform trial batches of 1 cy to ensure flowable consistency.Refer to Item 613.05 for mix design proportions.Alternative mix will be submitted for approval 30 days prior to placement.Notify District Testing if rejecting material. If material non-performs or looks defective during use SEQ CHAPTER \h \r 1notify District Testing and OMM.622Concrete XE "Concrete" Barriers622.04 Products will be supplied by a source on the Certified List for S-1073 maintained by OMM.Received with TE-24.Check dimension, markings, roughness or excessive cracks.Document in CMS.Notify District Testing if rejecting material. If material non-performs or looks defective during use SEQ CHAPTER \h \r 1notify District Testing and OMM.632.11Traffic XE "Traffic" Signal XE "Lamps: Signal" Equipment XE "Equipment" XE "Concrete, General: Equipment" Loop Detector SealantVerify manufacturer is on Approved List maintained by OMM.Inspect for condition, appearance and package markings.Document in CMS.Notify District Testing if rejecting material. If material non-performs or looks defective during use SEQ CHAPTER \h \r 1notify District Testing and OMM.633Traffic XE "Traffic" Signal XE "Lamps: Signal" ControllersInspect material for condition and conformance to shop drawings.Manufacturer’s certified test data required for acceptance.Refer to Handbook of Procedures for Contractor XE "Contractor: Definition" Certification of Lighting XE "Lighting" , XE "Cable: Lighting" Signing & Traffic XE "Traffic" Signal XE "Lamps: Signal" Working Drawings on OMM Manual website.Notify District Testing if rejecting material.653.02Topsoil XE "Topsoil" Obtain one (1) pint sample of material from each source and/or stockpile of visually different material from same source.Use friction top, air tight metal container supplied by the Department.Submit to Office of Geotechnical Engineering Operations.Samples will include a TE-31 form or CMS print screen657.02RipRap for Tree ProtectionConfirm with DET that the aggregate source has a acceptable performance history. For sources with poor performance require test data conforming to ASTM D5240 658.02Tree Root Aeration - Aggregate XE "Aggregate" Assure source on the Certified List for S 1069 maintained by OMM Assure aggregate meets soundness requirements. Sample sources with no soundness history and obtain a 100 lb (45 kg) sample659.03Seeding XE "Seeding" and Mulching XE "Mulching" - Liming MaterialsOnly accept materials from suppliers licensed in Ohio. See OMM website for list of Ohio Department of Agriculture list of licensed suppliers. Document in CMS 659.03Seeding XE "Seeding" and Mulching XE "Mulching" - Hydrated Lime SlurryVerify company and brand name of material is on QPL at the time of use. Document in CMS.Notify District Testing if rejecting material. If material non-performs or looks defective during use SEQ CHAPTER \h \r 1notify District Testing and OMM.659.04Seeding XE "Seeding" and Mulching XE "Mulching" - Commercial Fertilizer XE "Seeding: Fertilizer" XE "Fertilizer" Only accept materials from suppliers licensed in Ohio. See OMM website for list of Ohio Department of Agriculture list of licensed suppliers. Inspect material for certified analysis and condition.Non-standard application rate require approval prior to useDocument in CMS.Licensing is required. Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing & OMM.659.07659.08659.09S1022Seeding XE "Seeding" and Mulching XE "Mulching" SeedsLegumesNative Grasses and WildflowersVerify manufacturer is on certified supplier List maintained by OMM.Received with TE-24 and description bill of lading. Document in CMS.Verify District approval of seed mixture.659.14659.15659.16Seeding XE "Seeding" and Mulching XE "Mulching" - MulchMaterial should be reasonably free from foreign matter that would inhibit seed germination.Notify District if rejecting material.660.02Sodding XE "Sod" Verify company and brand name of material is on QPL at the time of use. Certification required for each shipment.Document in CMS.Notify District Testing if rejecting material.661Planting Trees XE "Tree" Shrubs and Vines XE "Vines" [Trees XE "Tree" ][Shrubs][Vines] XE "Vines" Verify company and brand name of material is on QPL at the time of use. Inspect material for condition.Plant material should be sealed until use.Document in CMS.Final acceptance should take place after period of establishment.Notify District Testing if rejecting material.STANDARD MATERIALS SPECIFICATIONS701.01701.02701.04701.05701.07701.09Cement XE "Cement" , HydraulicASTM Types I, IA, II, IIIMasonry XE "Masonry" XE "Concrete: Masonry" Slag XE "Aggregate: Slag" Modified Type I(SM)Verify manufacturer on Concrete XE "Concrete" Plant Batch Ticket is on Certified List for S 1028 maintained by OMM. Verify material against bill of lading description.Document in CMS.Obtain one ? gallon sample and original bill-of-lading per concrete plant every 180 days for QA. Ship sample to OMM laboratory. Ensure that sample container is filled to capacity prior to transport.701.10Micro-Silica AdmixtureVerify manufacturer on Concrete XE "Concrete" Plant Batch Ticket is on Certified List for S 1045 maintained by OMM. Verify material against bill of lading descriptionDocument in CMS.Obtain one ? gallon sample and original bill-of-lading per concrete plant every 180 days for QA. Ship sample to OMM laboratory.Ensure that sample container is filled to capacity prior to transport.701.11Ground Granulated Blast Furnace (GGBF) Slag XE "Aggregate: Slag" Verify manufacturer on Concrete XE "Concrete" Plant Batch Ticket is on Certified List for S 1034 maintained by OMM. Verify material against bill of lading descriptionDocument in CMS.Obtain one ? gallon sample and original bill-of-lading per concrete plant every 180 days for QA. Ship sample to OMM laboratory.Ensure that sample container is filled to capacity prior to transport.701.13Fly AshVerify manufacturer on Concrete XE "Concrete" Plant Batch Ticket is on Certified List for S 1026 maintained by OMM. Verify material against bill of lading descriptionDocument in CMS.If high LOI flyash verify manufacturer on Concrete XE "Concrete" Plant Batch Ticket is on List for S 1115.Obtain one ? gallon sample and original bill-of-lading per concrete plant every 180 days for QA. Ship sample to OMM laboratory.Ensure that sample container is filled to capacity prior to transport. 702.01Asphalt XE "Concrete: Asphalt" BinderCertified asphalt PG binder: As directed by the Lab. Plant: Minimum of one sample per project per season, except for inconsequential quantities.Non-Certified PG binder: Will be sampled and approved by the Department before use.Certified binder: Plant: Submit sample to Lab. Non-certified binder: Submit to Lab. Do not allow asphalt production until material is approved.702.02702.03702.04702.07702.13Cut Back Asphalt XE "Concrete: Asphalt" Cut Back Asphalt XE "Concrete: Asphalt" Emulsions XE "Emulsions" Emulsified XE "Asphalt: Emulsified" AsphaltsAsphalt XE "Concrete: Asphalt" Emulsion MWSRubberized Asphalt XE "Concrete: Asphalt" EmulsionCertified material: At the refinery or source as directed by the Lab. Project and/ or Plant: One sample per each 25,000 gallons. None for less than 300 gallons.Non-certified material: Will be sampled and approved by the Department before use. Certified material: Submit to Lab. Non-certified material: Submit to Lab. Do not use until approved by Lab.702.05702.06Asphalt XE "Concrete: Asphalt" Primer XE "Primer" Waterproofing XE "Waterproofing" XE "Asphalt: Waterproofing" Asphalt XE "Concrete: Asphalt" Waterproofing XE "Waterproofing" XE "Asphalt: Waterproofing" Each batch sampled and pre-approved per TE 24. Lab contacted by supplier for test.Project: Do not accept on project without TE 24.702.14Rubber Compound SEQ CHAPTER \h \r 1Certified test data702.16Polymer Emulsified XE "Asphalt: Emulsified" Binder SEQ CHAPTER \h \r 1Certified test data702.17Crack SealantMaterial is pre-tested and approved.Will be shipped with TE-24.Document in CMS.Notify District Testing if rejecting material. If material non-performs or looks defective during use SEQ CHAPTER \h \r 1Notify District Testing and OMM Asphalt XE "Concrete: Asphalt" Section.703.02703.04703.05703.08Coarse Aggregate XE "Aggregate" - Group 0Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.Document in CMS.60 to 75 lb. QC sample taken by District lab at source a minimum two (2) times per year. 100 lb QC sample for sizes 1,2, and 24.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.02703.04703.05703.08Coarse Aggregate XE "Aggregate" - Group 1Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.Document in CMS.60 to 75 lb. QC sample taken by District lab at source a minimum four (4) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.02703.04703.05703.08703.10Coarse Aggregate XE "Aggregate" - Group 2Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.60 to 70 lb. QC sample taken from each 2600 ton (2360 metric ton) stockpile, submitted to OMM Aggregate XE "Aggregate" Section. 100 lb QC sample for sizes 1,2, and 24.Document in CMS.Do not use until tested and approved. SEQ CHAPTER \h \r 1No additional project sampling required for approved, sampled tonnage except if project believes there is a problem with the material [either gradation or quality]703.02703.03703.04703.05703.06Fine Aggregate XE "Aggregate: Fine" XE "Aggregate" - Group 0Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.Document in CMS.30 to 40 lb. QC sample taken by District lab at source a minimum two (2) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.02703.03703.04703.05703.06Fine Aggregate XE "Aggregate: Fine" XE "Aggregate" - Group 1Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.Document in CMS.30 to 40 lb. QC sample taken by District lab at source a minimum four (4) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.02703.03703.04703.05703.06Fine Aggregate XE "Aggregate: Fine" XE "Aggregate" - Group 2Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.30 to 40 lb. QC sample taken from each 1800 ton (1640 metric ton) stockpile, submitted to OMM Aggregate XE "Aggregate" Section.Document in CMS.Do not use until tested and approved.No additional project sampling required for approved, sampled tonnage except if project believes there is a problem with the material [either gradation or quality]703.02703.04703.05Dense Graded Aggregate XE "Aggregate" - Group 0Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.Document in CMS.90 to 100 lb. QC sample taken by District lab at source a minimum two (2) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.02703.04703.05Dense Graded Aggregate XE "Aggregate" - Group 1Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.Document in CMS.90 to 100 lb. QC sample taken by District lab at source a minimum four (4) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.02703.04703.05Dense Graded Aggregate XE "Aggregate" - Group 2Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.90 to 100 lb. QC sample taken from each 5200 ton (4720 metric ton) stockpile, submitted to OMM Aggregate XE "Aggregate" Section.Document in CMS.Do not use until tested and approved.No additional project sampling required for approved, sampled tonnage except if project believes there is a problem with the material [either gradation or quality]703.07Materials Mineral filler XE "Mineral filler" XE "Aggregate: Mineral filler" For limestone dust assure from a source on Certified List for S 1069.For Portland cement XE "Portland cement" XE "Air-entraining: Portland cement" assure source is on Certified list for S 1028For inert mineral filler sample for gradation. Submit to District Lab.703.11 Type 1Structural XE "Structural" Backfill XE "Backfill" for 603 Bedding and Backfill – Group 0 and 1 sourcesGroup 0 and 1 sources Assure materials provided by a source on the Certified List for S 1069Document in CMS90 to 100 lb. QC sample taken by District lab at source a minimum four (4) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.11 Type 1Structural XE "Structural" Backfill XE "Backfill" for 603 Bedding and Backfill – Group 2 sources Group 2 sources Assure materials provided by a source on the Certified List for S 106990 to 100 lb. QC sample taken from each 5200 ton (4720 metric ton) stockpile, submitted to OMM Aggregate XE "Aggregate" Section.Document in CMS.Do not use until tested and approved.No additional project sampling required for approved, sampled tonnage except if project believes there is a problem with the material [either gradation or quality]703.11 Type2Structural XE "Structural" Backfill XE "Backfill" for 603 Bedding and Backfill - – Group 0 and 1 sourcesGroup 0 and 1 sources Assure materials provided by a source on the Certified List for S 1069Document in CMS90 to 100 lb. QC sample taken by District lab at source a minimum four (4) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.11 Type2Structural XE "Structural" Backfill XE "Backfill" for 603 Bedding and Backfill - Group 2 sourcesGroup 2 sources Assure materials provided by a source on the Certified List for S 106990 to 100 lb. QC sample taken from 5200 ton (4720 metric ton) stockpile, submitted to OMM Aggregate XE "Aggregate" Section.Document in CMS.Do not use until tested and approved.No additional project sampling required for approved, sampled tonnage except if project believes there is a problem with the material [either gradation or quality]703.11 Type 3Structural XE "Structural" Backfill XE "Backfill" for 603 Bedding and Backfill – Group 0 and 1 sourcesGroup 0 and 1 sources Assure materials provided by a source on the Certified List for S 1069Document in CMS60 to 70 lb. QC sample taken by District lab at source a minimum four (4) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.11 Type 3Structural XE "Structural" Backfill XE "Backfill" for 603 Bedding and Backfill – Group 2 sourcesGroup 2 sources Assure materials provided by a source on the Certified List for S 106960 to 70 lb. QC sample taken from each 5200 ton (4720 metric ton) stockpile, submitted to OMM Aggregate XE "Aggregate" Section.Document in CMS.Do not use until tested and approved.No additional project sampling required for approved, sampled tonnage except if project believes there is a problem with the material [either gradation or quality]703.12.AAggregate XE "Aggregate" for 306 and 307 – Group 0 an 1 sourcesGroup 0 and 1 sources Assure materials provided by a source on the Certified List for S 1069Document in CMS60 to 70 lb. QC sample taken by District lab at source a minimum four (4) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.12.AAggregate XE "Aggregate" for 306 and 307 – Group 2 sourcesGroup 2 sources Assure materials provided by a source on the Certified List for S 106960 to 70 lb. QC sample taken from each 5200 ton (4720 metric ton) stockpile, submitted to OMM Aggregate XE "Aggregate" Section.Document in CMS.Do not use until tested and approved.No additional project sampling required for approved, sampled tonnage except if project believes there is a problem with the material [either gradation or quality]703.12.BAggregate XE "Aggregate" for 306 and 307 – Group 0 and 1 sourcesGroup 0 and 1 sources Assure materials provided by a source on the Certified List for S 1069Document in CMS90 to 100 lb. QC sample taken by District lab at source a minimum four (4) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.12.BAggregate XE "Aggregate" for 306 and 307 – Group 2 sourcesGroup 2 sources Assure materials provided by a source on the Certified List for S 106990 to 100 lb. QC sample taken from each 5200 ton (4720 metric ton) stockpile, submitted to OMM Aggregate XE "Aggregate" Section.Document in CMS.Do not use until tested and approved.No additional project sampling required for approved, sampled tonnage except if project believes there is a problem with the material [either gradation or quality]703.13Coarse Aggregate XE "Aggregate" for Items 451 and 452Assure materials provided by a source on the Certified List for S 1069Assure materials are on the OMM Freeze Thaw List Follow requirements of coarse aggregate 703.02Document in CMSNo project sampling required except if project believes there is a problem with the material [either gradation or quality]703.14Open-Hearth Steel XE "Castings: Steel" Slag XE "Aggregate: Slag" Aggregate XE "Aggregate" Used for Item 304Assure materials from a source on the Certified List for S 1069Stockpile and sample each 2500 tons (2300 metric tons). Notify the District laboratory for inspection of sources and to obtain split samples. Test for expansionNo additional project sampling required for approved, sampled tonnage except if project believes there is a problem with the material [either gradation or quality]703.15Open-Hearth, Electric Arc Furnace, and Basic Oxygen furnace Steel XE "Castings: Steel" Slag XE "Aggregate: Slag" Aggregate XE "Aggregate" Used for Items 410, 411, and 617See requirements for 703.14See requirements for 703.14703.16Suitable Materials for Embankment XE "Embankment" XE "Compaction: Embankment" ConstructionMultiple materials listed. Follow the requirements of the individual material specificationFollow the requirements of the individual material specificationModification required for 703.16703.17Group 0 Materials Aggregate XE "Aggregate" base XE "Aggregate: Base" XE "Base: Aggregate" XE "Aggregate for: Aggregate base" Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.Document in CMS.90 to 100 lb. QC sample taken by District lab at source a minimum two (2) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.17Group 1 Materials Aggregate XE "Aggregate" base XE "Aggregate: Base" XE "Base: Aggregate" XE "Aggregate for: Aggregate base" Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.Document in CMS.90 to 100 lb. QC sample taken by District lab at source a minimum four (4) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.17Group 2 Materials Aggregate XE "Aggregate" base XE "Aggregate: Base" XE "Base: Aggregate" XE "Aggregate for: Aggregate base" Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.90 to 100 lb. QC sample taken from each 5200 ton (4720 metric ton) stockpile, submitted to OMM Aggregate XE "Aggregate" Section.Document in CMS.Do not use until tested and approved.No additional project sampling required for approved, sampled tonnage except if project believes there is a problem with the material [either gradation or quality]703.18Group 0 Materials for Items 410, 411, and 617.Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.Document in CMS.90 to 100 lb. QC sample taken by District lab at source a minimum two (2) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.18Group 1 Materials for Items 410, 411, and 617.Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.Document in CMS.90 to 100 lb. QC sample taken by District lab at source a minimum four (4) times per year.No project sampling required except if project believes there is a problem with the material [either gradation or quality]703.18Group 2 Materials for Items 410, 411, and 617.Products will be supplied by a source on the Certified List for S 1069 maintained by OMM.90 to 100 lb. QC sample taken from each 5200 ton (4720 metric ton) stockpile, submitted to OMM Aggregate XE "Aggregate" Section.Document in CMS.Do not use until tested and approved.No additional project sampling required for approved, sampled tonnage except if project believes there is a problem with the material [either gradation or quality]703.19.ACrushed Aggregate XE "Aggregate" Slope Protection and Filter Aggregate for Dump Rock FillProducts will be supplied by a source on the Certified List for S 1069 maintained by OMM.Document in CMSNo sampling required except if project believes there is a problem with the material [either gradation or quality]703.19.BDumped Rock Fill and Rock Channel ProtectionProducts will be supplied by a source on the Certified List for S 1069 maintained by OMM.Confirm with OMM laboratory source has know durability historySample on direction of the OMM laboratoryDocument in CMSNo sampling required except if project believes there is a problem with the material [either gradation or quality]704.01704.02704.03Block:Brick XE "Concrete: Brick" XE "Brick" Concrete XE "Concrete" Masonry XE "Masonry" XE "Concrete: Masonry" Shale XE "Shale" Verify type of material is on QPL at the time of use. Inspect for condition and defects.Document in CMS.Notify District Testing if rejecting material.When material non-performs or looks defective during use reject material and sample 12 brick representative of defect to OMM for QA follow-up.705.01Fiber Reinforced Polymer (FRP) Dowel BarsCertified test data from an accredited testing facility will accompany each shipment.Document in CMS.Notify District Testing upon receipt of shipment.705.03Joint XE "Joint" FillerPreformedVerify type and brand name of material is on QPL at the time of use.Inspect for condition, appearance and dimension.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use send one (1) 1.5'x2.5' sample representative of defect to OMM for QA follow-up. 705.04Joint XE "Joint" and Crack Sealer XE "Sealer" Hot AppliedMaterial is pre-tested and approved.Will be shipped with TE-24.Document in CMS.Notify District Testing if rejecting material. If material non-performs or looks defective during use SEQ CHAPTER \h \r 1nnotify District Testing and OMM Asphalt XE "Concrete: Asphalt" Section for sampling requirements.705.05Burlap Cloth MaterialsInspect for condition, appearance and dimension.Documenting in CMS .is not requiredOnly sample if there if questioning material meet specificationNotify District Testing if rejecting material.If material non-performs or looks defective during use SEQ CHAPTER \h \r 1notify District Testing and OMM.705.06Sheet Curing XE "Concrete: Curing" MaterialsInspect for condition, appearance and dimension.Documenting in CMS is not required.Only sample if there if questioning material meet specificationNotify District Testing if rejecting material.If material non-performs or looks defective during use SEQ CHAPTER \h \r 1notify District Testing and OMM.705.07Concrete XE "Concrete" Curing XE "Concrete: Curing" CompoundsVerify type and brand name of material is on QPL at the time of use.Inspect for condition and appearance.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use send one (1) quart sample representative of defect to OMM, Cement XE "Cement" and Concrete XE "Concrete" section, for QA follow-up. 705.10Air Entraining Admixtures XE "Concrete, General: Admixtures" XE "Concrete: Admixtures" XE "Air-entraining: Admixtures" Verify type and brand name of material listed on Concrete XE "Concrete" Plant Batch Ticket is on QPL at the time of use.Document in CMS.Storage: Admixtures XE "Concrete, General: Admixtures" XE "Concrete: Admixtures" XE "Air-entraining: Admixtures" should be stored at concrete producer in such a manner to permit easy access for proper identification in weather resistant units.Provide minimum QA sample of one (1) every 180 days per concrete plant, each material, each company. Minimum sample size one (1) quart705.11Joint XE "Joint" Sealer XE "Sealer" Preformed ElastomericVerify type and brand name of material is on QPL at the time of use.Inspect for condition, appearance, dimension and manufacturer trademark. Document in CMS. Notify District Testing if rejecting material because material non-performs or looks defective during use.705.12Chemical Admixtures XE "Concrete, General: Admixtures" XE "Concrete: Admixtures" XE "Air-entraining: Admixtures" for Concrete XE "Concrete" Verify type and brand name of material is on QPL at the time of use.Document in CMS.Storage: Admixtures XE "Concrete, General: Admixtures" XE "Concrete: Admixtures" XE "Air-entraining: Admixtures" should be stored at concrete producer in such a manner to permit easy access for proper identification in weather resistant units.Provide minimum QA sample of one (1) every 180 days per concrete plant, each material, each company. Minimum sample size one (1) quart. 705.15High Molecular Weight Methacrylate (HMWM)Verify type and brand name of material is on QPL at the time of use.Document in CMS.705.20Non Shrink, Non Metallic Grout XE "Grout" Verify type and brand name of material is on QPL at the time of use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use SEQ CHAPTER \h \r 1notify District Testing and OMM for sampling requirements.705.21Quick Setting Concrete XE "Concrete" Mortar XE "Mortar" Verify type and brand name of material is on QPL at the time of use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use SEQ CHAPTER \h \r 1notify District Testing and OMM for sampling requirements.705.22Non-shrink Mortar XE "Mortar" Verify manufacturer is on the Approved List maintained by OMM.Inspect for condition, appearance and dimension.Make three (3) or more 3"x6" cylinders from keyway mix.Ship to OMM Concrete XE "Concrete" Section. Document in CMS.Sample will be tested at 3, 7 and 28 days.Do not open structure to traffic until a compressive strength of 5000 psi (34.5 MPa) is achieved.705.23 AEpoxy-urethane SealersVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use obtain 1 qt (1 L) samples in a sealed container and send to OMM.705.23 BNon Epoxy SealersVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use obtain 1 qt (1 L) samples in a sealed container and send to OMM.705.24Soluble Reactive SilicateVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.705.25Gravity Fed ResinVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use obtain 1 qt (1 L) samples in a sealed container and send to OMM.705.26Epoxy injection ResinVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.706.01Non-Reinforced Concrete XE "Concrete" Pipe XE "Pipe" XE "Compaction: Pipe" Assure products are supplied by a source on the Certified List for S-1074 maintained by OMM.Received with TE-24.Check dimension, markings, roughness or excessive cracks.Document in CMS.Iif rejecting material because material non-performs or looks defective during use, notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, 706.02Reinforced Concrete XE "Concrete" Circular Pipe XE "Pipe" XE "Compaction: Pipe" Assure products are supplied by a source on the Certified List for S-1074 maintained by OMM.Received with TE-24.Check dimension, markings, roughness or excessive cracks.Document in CMS.If rejecting material because material non-performs or looks defective during use, notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, 706.03Reinforced Concrete XE "Concrete" Pipe XE "Pipe" , XE "Compaction: Pipe" Epoxy CoatedAssure products are supplied by a source on the Certified List for S-1074 maintained by OMM.Received with TE-24.Check dimension, markings, roughness or excessive cracks.Document in CMS.If rejecting material because material non-performs or looks defective during use, notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, 706.04Reinforced Concrete XE "Concrete" Elliptical Culvert XE "Culvert" , Storm Drain and Sewer Pipe XE "Pipe" XE "Compaction: Pipe" Assure products are supplied by a source on the Certified List for S-1074 maintained by OMM.Received with TE-24.Check dimension, markings, roughness or excessive cracks.Document in CMS.If rejecting material because material non-performs or looks defective during use, notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, 706.05Precast Reinforced Concrete XE "Concrete" Box SectionsAssure products are supplied by a source on the Certified List for S-1073 maintained by OMM.Received with TE-24.Check dimension, markings, roughness or excessive cracks.Document in CMS.If rejecting material because material non-performs or looks defective during use, notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, 706.051Precast Reinforced Concrete XE "Concrete" Three-Sided Flat Topped CulvertsAssure products are supplied by a source on the Certified List for S-1073 maintained by OMM.Received with TE-24.Check dimension, markings, roughness or excessive cracks.Document in CMS.If rejecting material because material non-performs or looks defective during use, notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, 706.052Precast Reinforced Concrete XE "Concrete" Arch SectionsAssure products are supplied by a source on the Certified List for S-1073 maintained by OMM.Received with TE-24.Check dimension, markings, roughness or excessive cracks.Document in CMS.If rejecting material because material non-performs or looks defective during use, notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, 706.06Perforated Concrete XE "Concrete" Pipe XE "Pipe" XE "Compaction: Pipe" Assure products are supplied by a source on the Certified List for S-1074 maintained by OMM.Received with TE-24.Check dimension, markings, roughness or excessive cracks.Document in CMS.If rejecting material because material non-performs or looks defective during use, notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, 706.07Concrete XE "Concrete" Drain TileAssure products are supplied by a source on the Certified List for S-1074 maintained by OMM.Received with TE-24.Check dimension, markings, roughness or excessive cracks.Document in CMS.If rejecting material because material non-performs or looks defective during use, notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, 706.08Vitrified Clay Pipe XE "Pipe" XE "Compaction: Pipe" Verify type and brand name of material is on QPL at the time of use.Inspect for condition, appearance and dimension.Document in CMS.If rejecting material because material non-performs or looks defective during use, notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, 706.09Clay Drain TileVerify type and brand name of material is on QPL at the time of use.Inspect for condition, appearance and dimension.Document in CMS.If rejecting material because material non-performs or looks defective during use, notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, 706.10Bituminous pipe joint filler XE "Bituminous pipe joint filler" Verify type and brand name of material is on QPL at the time of use.Inspect for condition, appearance and dimension.Document in CMS.If rejecting material because material non-performs or looks defective during use, notify District Testing and OMM, Asphalt XE "Concrete: Asphalt" Concrete XE "Concrete" section, 706.11Resilient and Flexible Gasket JointsVerify type and brand name of material is on QPL at the time of use.Inspect for condition, appearance and dimension.Document in CMS.Notify District Testing and OMM, Structural XE "Structural" Metals and Welding XE "Welding" section, if rejecting material because material non-performs or looks defective during use.706.12Resilient and Flexible JointsVerify type and brand name of material is on QPL at the time of use.Inspect for condition, appearance and dimension.Document in CMS.Notify District Testing and OMM Structural XE "Structural" Metals and Welding XE "Welding" section, if rejecting material because material non-performs or looks defective during use.706.13Precast Reinforced Concrete XE "Concrete" Manhole Riser Sections, Catch Basins and Inlet Tops, and Temporary BarriersAssure products are supplied by a source on the Certified List for S-1073 maintained by OMMReceived with TE-24.Check dimension, markings, roughness or excessive cracks.Document in CMS.Notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, if rejecting material because material non-performs or looks defective during use.706.14Flexible Plastic GasketsVerify type and brand name of material is on QPL at the time of use.Inspect for condition, appearance and dimension.Document in CMS.Notify District Testing and OMM, Structural XE "Structural" Metals and Welding XE "Welding" section, if rejecting material because material non-performs or looks defective during use.706.15Precast Reinforced Concrete XE "Concrete" OutletsAssure products are supplied by a source on the Certified List for S-1073 maintained by OMMReceived with TE-24.Check dimension, markings, roughness or excessive cracks.Document in CMS.Notify District Testing and OMM, Cement XE "Cement" and Concrete XE "Concrete" section, if rejecting material because material non-performs or looks defective during use.707.01Metallic Coated Corrugated Steel XE "Castings: Steel" Conduits and Underdrains XE "Underdrains" XE "Pipe: Underdrains" [? inch and 1/4 depth corrugations]Products will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimensions and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.02Metallic Coated Corrugated Steel XE "Castings: Steel" Conduits[1 inch depth corrugation]Products will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimensions and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.03Structural XE "Structural" Plate Corrugated Steel XE "Castings: Steel" Structures XE "Backfill: Structures" XE "Anchor bolts: Structures" Products will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimensions and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.04Precoated, Galvanized Steel XE "Castings: Steel" CulvertsProducts will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimensions and cracks.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use707.05705.07Bituminous Coated Corrugated Steel XE "Castings: Steel" Pipe XE "Pipe" XE "Compaction: Pipe" and Arches XE "Pipe: Arches" with Paved Invert [? inch depth corrugations][1 inch depth corrugations]Products will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimensions and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.10Steel XE "Castings: Steel" TubingSquare and RectangularGenerally a fabricated component received with TE-24.Check dimensions and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.11Mortar XE "Mortar" Lined Corrugated Steel XE "Castings: Steel" Pipe XE "Pipe" XE "Compaction: Pipe" [any corrugation depth]Products will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimensions and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.12Corrugated Steel XE "Castings: Steel" Spiral Rib ConduitsProducts will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimensions and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use707.13707.14Bituminous Lined Corrugated Steel XE "Castings: Steel" Pipe XE "Pipe" XE "Compaction: Pipe" [? depth corrugations][1 depth corrugations]Products will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimensions and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.15Corrugated Steel XE "Castings: Steel" Box CulvertsProducts will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimensions and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.21Corrugated Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" Alloy Conduits and Underdrains XE "Underdrains" XE "Pipe: Underdrains" [1/4, 7/16 & ? inch depth corrugations]Products will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimension and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.22Corrugated Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" Alloy ConduitsProducts will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimension and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.23Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" Alloy Structural XE "Structural" Plate ConduitsProducts will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimensions and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.24Corrugated Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" Spiral Rib ConduitsProducts will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimensions and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.25Corrugated Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" Box CulvertsProducts will be supplied by a source on the Certified List for S-1019 maintained by OMM.Received with TE-24.Check dimensions and markings.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.707.31707.32707.33Polyethylene Corrugated Pipe XE "Pipe" XE "Compaction: Pipe" Products will be supplied by a source on the Certified List for S-1066 maintained by OMM.Received with TE-24.Check dimension and markings.Document in CMS.Notify District Testing and OMM, asphalt section, if rejecting material because material non-performs or looks defective during use.707.41Polyvinyl Chloride Plastic Pipe XE "Pipe" XE "Compaction: Pipe" If material is shipped with TE24, accept based on inspection of material for type, condition and dimension.Document in CMS.If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data.Document in CMSNotify District Testing if rejecting material. 707.42Polyvinyl Chloride Corrugated Smooth Interior Pipe XE "Pipe" XE "Compaction: Pipe" If material is shipped with TE24, accept based on inspection of material for type, condition and dimension.Document in CMS.If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data.Document in CMSNotify District Testing if rejecting material. 707.43Polyvinyl Chloride Profile Wall Pipe XE "Pipe" XE "Compaction: Pipe" If material is shipped with TE24, accept based on inspection of material for type, condition and dimension.Document in CMS.If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data.Document in CMSNotify District Testing if rejecting material. 707.44Polyvinyl Chloride Sanitary Pipe XE "Pipe" XE "Compaction: Pipe" If material is shipped with TE24, accept based on inspection of material for type, condition and dimension.Document in CMS.If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data.Document in CMSNotify District Testing if rejecting material. 707.45Polyvinyl Chloride Solid Wall Pipe XE "Pipe" XE "Compaction: Pipe" If material is shipped with TE24, accept based on inspection of material for type, condition and dimension.Document in CMS.If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data.Document in CMSNotify District Testing if rejecting material. 707.46Polyvinyl Chloride Drain Waste and Vent Pipe XE "Pipe" XE "Compaction: Pipe" If material is shipped with TE24, accept based on inspection of material for type, condition and dimension.Document in CMS.If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data.Document in CMSNotify District Testing if rejecting material. 707.47ABS and Polyvinyl Chloride Composite Pipe XE "Pipe" XE "Compaction: Pipe" If material is shipped with TE24, accept based on inspection of material for type, condition and dimension.Document in CMS.If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data.Document in CMSNotify District Testing if rejecting material. 707.51ABS Drain Waste and Vent Pipe XE "Pipe" XE "Compaction: Pipe" If material is shipped with TE24, accept based on inspection of material for type, condition and dimension.Document in CMS.If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data.Document in CMSNotify District Testing if rejecting material. 707.52ABS Sewer Pipe XE "Pipe" XE "Compaction: Pipe" If material is shipped with TE24, accept based on inspection of material for type, condition and dimension.Document in CMS.If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data.Document in CMSNotify District Testing if rejecting material. 707.70Welded and Seamless Steel XE "Castings: Steel" Pipe XE "Pipe" XE "Compaction: Pipe" Verify type and brand name of material is on QPL at the time of use.Document in CMS.Notify District Testing and OMM, structural metals and Welding XE "Welding" section, if rejecting material because material non-performs or looks defective during use.708.01Inorganic Zinc Silicate Primer XE "Primer" Paint XE "Paint" Products will be supplied by a source on the Certified List for S-1084 maintained by OMM.Verify type and brand name of material is on QPL at the time of use.Inspect material container for markings, expiration date and condition.Document in CMS.Notify District Testing and OMM, chemical section, if rejecting material because material non-performs or looks defective during use. Obtain a 1 qt (1 L) sample representative of the defects.708.02708.02B708.02C708.02DOZEU Structural XE "Structural" Steel XE "Castings: Steel" PantOrganic Zinc Prime CoatEpoxy Intermediate CoatUrethane Finish CoatProducts will be supplied by a source on the Certified List for S-1084 maintained by OMM.Verify type and brand name of material is on QPL at the time of use.Inspect material container for markings, expiration date and condition.Document in CMS.Notify District Testing and OMM, chemical section, if rejecting material because material non-performs or looks defective during use. Obtain a 1 qt (1 L) sample representative of the defects.709.01Deformed and Plain Billet Steel XE "Castings: Steel" Bars for Concrete XE "Concrete" ReinforcementProducts will be supplied by a source on the Certified List for S-1068 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three (3) 30" (.8 m) long samples of each rebar size, with markings, and submit for QA testing by the Laboratory.709.03Rail Steel XE "Castings: Steel" Deformed and Plain Bars for Concrete XE "Concrete" ReinforcementProducts will be supplied by a source on the Certified List for S-1068 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three (3) 30" (.8 m) long samples of each rebar size, with markings, and submit for QA testing by the Laboratory.709.05Axle Steel XE "Castings: Steel" Deformed and Plain Bars for Concrete XE "Concrete" ReinforcementProducts will be supplied by a source on the Certified List for S-1068 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three (3) 30" (.8 m) long samples of each rebar size, with markings, and submit for QA testing by the Laboratory.709.08Cold-Drawn Steel XE "Castings: Steel" Wire XE "Wire" for Concrete XE "Concrete" ReinforcementProducts will be supplied by a source on the Certified List for S-1068 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three (3) 30" (.8 m) long samples of each diameter and submit for QA testing by the Laboratory.709.09Fabricated Steel XE "Castings: Steel" Bar or Rod Mats for Concrete XE "Concrete" ReinforcementProducts will be supplied by a source on the Certified List for S-1068 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 3 ft x 3 ft (1 m x 1 m) of the mat and submit for QA testing by the Laboratory.709.10Welded Steel XE "Castings: Steel" Wire XE "Wire" Fabric XE "Fence: Fabric" for Concrete XE "Concrete" ReinforcementProducts will be supplied by a source on the Certified List for S-1068 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 3 ft x 3 ft (1 m x 1 m) of the mat and submit for QA testing by the Laboratory.709.11Deformed Steel XE "Castings: Steel" Wire XE "Wire" for Concrete XE "Concrete" ReinforcementProducts will be supplied by a source on the Certified List for S-1068 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 3 ft x 3 ft (1 m x 1 m) of the mat and submit for QA testing by the Laboratory.709.12Welded Deformed Steel XE "Castings: Steel" Wire XE "Wire" Fabric XE "Fence: Fabric" for Concrete XE "Concrete" ReinforcementProducts will be supplied by a source on the Certified List for S-1068 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 3 ft x 3 ft (1 m x 1 m) of the mat and submit for QA testing by the Laboratory.709.13Coated Dowel BarsProducts will be supplied by a source on the Certified List for S-1068 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 3 dowel bars and submit for QA testing by the Laboratory.709.14Epoxy-Coated Steel XE "Castings: Steel" Wire XE "Wire" and Welded Wire Fabric XE "Fence: Fabric" for ReinforcementProducts will be supplied by a source on the Certified List for S-1068 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 3 ft x 3 ft (1 m x 1 m) of the mat and submit for QA testing by the Laboratory.709.15Plastic Supports XE "Supports" for Reinforcing Steel XE "Castings: Steel" Products will be supplied by a source on the Approved List maintained by OMM.Inspect for dimension and condition.Notify District Testing if rejecting material that non-performs or looks defective during use. 709.16Galvanizing XE "Galvanizing" Steel XE "Castings: Steel" Option for Bridge XE "Bridge" SpiralsProducts will be supplied by a source on the Certified List for S-1068 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three (3) 30" (.8 m) long samples of each rebar size, with markings, and submit for QA testing by the Laboratory.710.01.A710.01 BBarbed Wire XE "Wire" Products will be supplied by a source on the Certified List for S-1067 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain a 5 ft (1.5 m) length of barbed wire and submit for QA testing by the Laboratory.710.02Woven Steel XE "Castings: Steel" Wire XE "Wire" Fence XE "Posts: Fence" XE "Fence" , XE "Aluminum: Fence" Type 47Products will be supplied by a source on the Certified List for S-1067 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 4 ft (1.2 m) width of fencing and submit for QA testing by the Laboratory.710.03Chain-Link Fence XE "Posts: Fence" XE "Fence" XE "Aluminum: Fence" [ including Fittings and Accessories]Products will be supplied by a source on the Certified List for S-1067 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain samples as directed by the Laboratory.710.06Deep Beam RailProducts will be supplied by a source on the Certified List for S-1042 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three (3) 1 ft (0.3 m) lengths of guardrail from the same section and submit for QA testing by the Laboratory.710.09Wire XE "Wire" Rope RailInspect for dimension, condition, appearance and markings on tag or reel.Submit one (1) six (6) ft. sample to OMM.Document in CMS.Approval required prior to use. SEQ CHAPTER \h \r 1Notify District Testing and OMM.710.11Fence XE "Posts: Fence" XE "Fence" XE "Aluminum: Fence" Posts XE "Posts" and Braces[Lumber XE "Lumber" ][Steel] XE "Castings: Steel" Products will be supplied by a source on the Certified List for S-1067 and S-1072 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. 710.12Square-Sawed and Round Guardrail XE "Posts: Guardrail" XE "Guardrail" Posts XE "Posts" Products will be supplied by a source on the Certified List for S-1042 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. 710.14Pressure Treated Guardrail XE "Posts: Guardrail" XE "Guardrail" and Fence XE "Posts: Fence" XE "Fence" XE "Aluminum: Fence" Posts, XE "Posts" Braces, and Blocks XE "Blocks" Products will be supplied by a source on the Certified List for S-1042 and S-1067 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. 710.15Steel XE "Castings: Steel" Guardrail XE "Posts: Guardrail" XE "Guardrail" Posts XE "Posts" Products will be supplied by a source on the Certified List for S-1042 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. 710.16Guard Posts XE "Posts" Products will be supplied by a source on the Certified List for S-1042 and S-1067 maintained by OMM.Received with TE-24.Check dimension, markings and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. 711.01711.04711.07Structural XE "Structural" Steel XE "Castings: Steel" Cold Rolled Steel XE "Castings: Steel" Steel XE "Castings: Steel" Castings XE "Castings" Material supplied by a Fabricator XE "Fabricator" XE "Approval of structure: Fabricator" source on the Certified List for Items 513, 516, 517 & 518 maintained by OMM.Structural XE "Structural" Steel XE "Castings: Steel" Members are received with TE-24.If questions concerning structural steel materials, contact OMM Structural XE "Structural" Steel XE "Castings: Steel" Section SEQ CHAPTER \h \r 1and notify District Testing.711.02Galvanized Steel XE "Castings: Steel" Any material supplied with galvanizing will conform to this specification. Randomly inspect galvanizing for appearance and thickness of coating.Notify District Testing if rejecting material. 711.03Steel XE "Castings: Steel" for Sheet PilingCertified Mill Test Data required for new material.Verify tensile and chemical properties meet requirements.Inspect all material for dimension and condition.Used material is not acceptable for permanent installations.Document field inspection.711.08Arc-welding Electrode & FluxesVerify manufacturer is on Approved List maintained by OMM. Inspect for dimension, condition and markings.Document in CMS.If material is not on Approved List, certification and test data from supplier will be submitted to OMM. Do not use until approval has been received.711.09High Strength Bolts XE "Bolts" Nuts and Washers XE "Washers" Received with TE-24.Inspect material for dimension, condition and markings.Reject defective material.Perform field testing of assembly combination per S-1080.Document field inspection & testing in CMS.If field test does not meet requirements of S 1080, retest bolt, nut and washer combination after application of a lubricant.Notify District Testing if rejecting material. 711.10Machine Bolts XE "Bolts" General specification for many common boltsVerify material is component of certified supplier shipment like S-1042 for Guardrail XE "Posts: Guardrail" XE "Guardrail" Suppliers or S-1067 for Fence XE "Posts: Fence" XE "Fence" XE "Aluminum: Fence" Suppliers.Inspect for condition and coating.Reject defective material.Notify District Testing if rejecting material.711.12711.13711.14Gray Iron XE "Castings: Iron" Castings XE "Castings" Ductile Iron XE "Castings: Iron" Castings XE "Castings" Gray Iron XE "Castings: Iron" & Ductile Iron Castings XE "Castings" Verify manufacturer is on Approved List maintained by OMM. Received with TE-24.Inspect for condition and defect. SEQ CHAPTER \h \r 1Notify District Testing if rejecting material711.15711.16711.17711.18711.19Sheet Copper XE "Copper" Phosphor Bronze XE "Bronze" PlateCast Bronze XE "Bronze" Leaded Bronze XE "Bronze" Sheet LeadMaterial supplied by a Fabricator XE "Fabricator" XE "Approval of structure: Fabricator" source on the Certified List for Items 513, 516, 517 & 518 maintained by OMM.Structural XE "Structural" Steel XE "Castings: Steel" Members are received with TE-24.Document in CMS.If questions concerning structural steel materials, contact OMM Structural XE "Structural" Steel XE "Castings: Steel" Section SEQ CHAPTER \h \r 1and notify District Testing.711.20Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" for Railings XE "Railings" Material supplied by a Fabricator XE "Fabricator" XE "Approval of structure: Fabricator" source on the Certified List for Items 513, 516, 517 & 518 maintained by OMM.Structural XE "Structural" Steel XE "Castings: Steel" Members are received with TE-24.Document in CMS.If questions concerning structural steel materials, contact OMM Structural XE "Structural" Steel XE "Castings: Steel" Section SEQ CHAPTER \h \r 1and notify District Testing.711.21Preformed Bearing XE "Bolts: Bearing" Pads XE "Preformed Bearing Pads" Verify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.If material non-performs or looks defective during use SEQ CHAPTER \h \r 1notify District Testing and OMM.711.23Elastomeric BearingsOnly accept elastomeric bearings shipped by TE-24.and provided by certified suppliers conforming to S1081. Notify district testing. to Inspect material to check location and number of internal shims utilizing an ice pick or similar tool. Five (5) Durometer Gage readings should be taken and averaged to determine compliance with design plans.Document in CMS.Field acceptable for durometer. Reading average range: +/- 7 points of design plan number. 711.24Waterproofing XE "Waterproofing" XE "Asphalt: Waterproofing" fabricVerify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing if rejecting material.711.25Type 2 Membrane Waterproofing XE "Waterproofing" XE "Asphalt: Waterproofing" Verify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use send one (1) 4 ft2 sample representative of defect to OMM for QA follow-up. 711.26Structural XE "Structural" Timber, XE "Timber" Lumber XE "Lumber" and PilingProducts will be supplied by a source on the Certified List for S-1072 maintained by OMM.Received with TE-24 and supplier bill of lading.Check dimension, quantity and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.711.27Prestressing Steel XE "Castings: Steel" Material supplied by a Fabricator XE "Fabricator" XE "Approval of structure: Fabricator" source on the Certified List for Items 515 maintained by OMM.Prestressed XE "Concrete: Prestressed" Concrete XE "Concrete" Members are received with TE-24.If questions concerning prstressed concrete or prestressed 711.28Cellular Polyvinyl Chloride SpongeVerify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use sendone (1) 1.5'x2.5' sample representative of defect to OMM for QA follow-up. 711.29Type 3 Membrane Waterproofing XE "Waterproofing" XE "Asphalt: Waterproofing" Verify type and brand name of material is on QPL at the time of use.Membrane primer is 705.04 materialInspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use sendone (1) 4 square ft sample representative of defect to OMM for QA follow-up. 711.30Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" for Steps XE "Steps" XE "Concrete: Steps" Verify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.711.31Reinforced Propylene Plastic Manhole Steps XE "Steps" XE "Concrete: Steps" Verify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.712.01Expansion Shield AnchorsVerify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three(3) samples representative of defect to OMM for QA follow-up. 712.02Calcium Chloride Verify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use contact OMM.712.03Sodium ChlorideInspect material for condition.Submit one (1) pint sample per Each Purchase Order to OMM.Document in CMS.If additional samples required for material quantities exceeding 3000 tons, Notify District Testing.712.04 ALime [masonry]Sample & Inspect material for condition with 24 hrs of receipt.One (1) five (5) lb sample for Masonry XE "Masonry" XE "Concrete: Masonry" and Stabilization purposes.One (1) ten (10) lb sample of Quicklime. Send to Geotechnical Engineering.Document in CMS.Notify District Testing if rejecting material.Samples may be taken in triplicate, if required. Contact Geotechnical Engineering.712.04 BLime [Quick] StabilizationAssure provided material is from suppliers certified under Supplement 1087 and documentation for m S1087 is complete. Document in CMS.If questions on material quality sample.One (1) five (5) lb sample for Masonry XE "Masonry" XE "Concrete: Masonry" and Stabilization purposes.One (1) ten (10) lb sample of Quicklime. Send to Geotechnical Engineering.Notify District Testing if rejecting material.Samples may be taken in triplicate, if required. Contact Geotechnical Engineering.712.04 BLime [Hydrated] StabilizationAssure provided material is from suppliers certified under Supplement 1087 and documentation for m S1087 is complete. Document in CMS.If questions on material quality sample.One (1) five (5) lb sample for Masonry XE "Masonry" XE "Concrete: Masonry" and Stabilization purposes.One (1) ten (10) lb sample of Quicklime. Send to Geotechnical EngineeringNotify District Testing if rejecting material.Samples may be taken in triplicate, if required. Contact Geotechnical Engineering.712.04 CLime [Hydrated] StabilizationAssure provided material is from suppliers certified under Supplement 1087 and documentation for m S1087 is complete. Document in CMS.If questions on material quality sample.One (1) five (5) lb sample for Masonry XE "Masonry" XE "Concrete: Masonry" and Stabilization purposes.One (1) ten (10) lb sample of Quicklime. Send to Geotechnical EngineeringNotify District Testing if rejecting material.Samples may be taken in triplicate, if required. Contact Geotechnical Engineering.712.06Preservative XE "Preservative" Treatment for Structural XE "Structural" Timber XE "Timber" Component material of pressure treated lumber. No approval required.If questions on pressure treated lumber check the specific material item and follow those instructions712.09Geotextile FabricsVerify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use submit one (1) 4' x 4' sample representative of defect to OMM.712.10Prefabricated Edge UnderdrainInspect material for condition and dimension.Manufacturer’s certified test data required for acceptance.Document in CMS.Notify District Testing if rejecting material.712.11Temporary Erosion Control Mats Material[Types A through I]Inspect material for condition and dimension.Manufacturer’s certified test data required for acceptance.Field Acceptance XE "Acceptance" itemRefer to Temporary Materials Policy for documentation requirements.Notify District Testing if rejecting material.720.01Rectangular ReflectorsVerify type and brand name of material is on QPL at the time of use.Inspect for condition, color requirements and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.720.03Flexible Delineator Posts XE "Posts" Verify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.720.04Barrier XE "Concrete: Barrier" XE "Barrier" ReflectorsVerify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.721.01Raised Pavement XE "Pavement" XE "Concrete: Pavement" Marker Castings XE "Castings" Verify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify type conforms to pre-qualification requirements. Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain one (1) 4x2x0.48 in. sample representative of defect to OMM for QA follow-up.721.02Prismatic RetroreflectorVerify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify type conforms to pre-qualification requirements. Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain one (1) sample representative of defective RPM casting to OMM for QA follow-up.721.03Casting AdhesiveVerify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.721.04Prismatic Retroreflector AdhesiveVerify type and brand name of material is on QPL at the time of use.Inspect for condition and defect.Verify dimension conform to plan requirements. Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use725.02Electrical CablesVerify type and brand name of material is on QPL at the time of use.Inspect for condition, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use send a sample representative of non -compliance or defect to OMM for QA follow-up.725.03Unit Type Duct-Cable XE "Cable" SystemsVerify type and brand name of material is on QPL at the time of use.Inspect for condition, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use send a 10 ft. sample representative of non -compliance or defect to OMM for QA follow-up.725.04Rigid Ferrous Metal Electrical Conduit XE "Conduit" and FittingsVerify type and brand name of material is on QPL at the time of use.Inspect for condition of coating and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use send a sample representative of non -compliance or defect to OMM for QA follow-up.725.051Polyvinyl Chloride Conduit XE "Conduit" and FittingsVerify type and brand name of material is on QPL at the time of use.Inspect for condition, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use send a sample representative of non -compliance or defect to OMM for QA follow-up.725.052Polyethylene Conduit XE "Conduit" and FittingsVerify type and brand name of material is on QPL at the time of use.Inspect for condition, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use send a sample representative of non -compliance or defect to OMM for QA follow-up.725.06Polymer Concrete XE "Concrete" Pull BoxesVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use send a sample representative of non -compliance or defect to OMM for QA follow-up.725.07Plastic Pull BoxVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use SEQ CHAPTER \h \r 1notify District Testing and OMM.725.08Portland Concrete XE "Concrete" Pull BoxesProducts will be supplied by a source on the Certified List for S-1073 maintained by OMM.Received with TE-24.Check dimension, markings, roughness or excessive cracks.Item 604 Installation documented on CA-P-3 Inspection XE "Inspection" Form.Document in CMS.Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM..725.10Junction BoxesVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.725.11 BLamps XE "Lamps" XE "Highway lighting: Lamps" for LuminairesVerify type and brand name of material is on QPL at the time of use.Inspect for condition, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.725.11 ELuminaires for High Intensity Discharge Lamps XE "Lamps" XE "Highway lighting: Lamps" (including Optical system, lamp, ballast and housing) Verify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.725.11 FWall Mounted Underpass Luminaires (including Optical system, lamp, ballast and housing)Verify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.725.11 GHigh Mast/Low Mast Luminaire XE "Luminaire" XE "Highway lighting: Luminaire" (including Optical system, lamp, ballast and housing)Verify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.725.12Polyethylene, Fiberglas reinforced, Pull Box with Polymer concrete cover and support ringVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.725.15Circuit Cable XE "Cable" Connections XE "Cable: Connections" and terminations Verify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.725.16Ground Rods Verify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use contact OMM.725.19 IPower Service ComponentsWood XE "Posts: Wood" PoleProducts will be supplied by a source on the Certified List for S-1072 maintained by OMM.Received with TE-24 and supplier bill of lading.Check dimension, quantity and condition.Document in CMS.Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.725.20Multiple Cell Polyvinyl Chloride Conduit XE "Conduit" and FittingsVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, markings and conformance to plan requirements.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.725.21 ALuminaire XE "Luminaire" XE "Highway lighting: Luminaire" Supports XE "Supports" Light XE "Poles: Light" Poles XE "Poles" Inspect material for condition and conformance to plan requirements.Verify pole provided by Certified Manufacturer under Supplement 1091.Accept with TE-24Document in CMSNotify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.725.21 BLuminaire XE "Luminaire" XE "Highway lighting: Luminaire" Supports XE "Supports" Light XE "Poles: Light" TowersInspect material for condition and conformance to plan requirements.Verify pole provided by Certified Manufacturer under Supplement 1091.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.725.21B9 Luminaire XE "Luminaire" XE "Highway lighting: Luminaire" SupportAnchor Bolts XE "Bolts" OPTION 1Verify type and brand name of material is on QPL at the time of use.Inspect for condition, and conformance to plan requirements.OPTION 2Verify pole provided by Certified Manufacturer under Supplement 1091.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.01Steel XE "Castings: Steel" Tube and Pipe XE "Pipe" XE "Compaction: Pipe" This item typically is a component of a sign support. Inspect total component for condition and conformance to shop drawings. Document in CMSNotify District Testing if rejecting material.730.015U-Channel XE "Posts: U-Channel" Posts XE "Posts" Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District testing and OMM.730.016Square Posts XE "Posts" Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.02Steel XE "Castings: Steel" Anchor Bolts XE "Bolts" and NutsOPTION 1Verify type and brand name of material is on QPL at the time of use.Inspect for condition, and conformance to plan requirements.OPTION 2Verify pole provided by Certified Manufacturer under Supplement 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.03Steel XE "Castings: Steel" Poles XE "Poles" and ArmsComponent material provided by Certified Manufacturer under Supplement 1093. Verify manufacturer is on 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.04Base XE "Base" and Arm PlatesComponent material provided by Certified Manufacturer under Supplement 1093. Verify manufacturer is on 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.05Handhole CoversComponent material provided by Certified Manufacturer under Supplement 1093. Verify manufacturer is on 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.06Pole CapsComponent material provided by Certified Manufacturer under Supplement 1093. Verify manufacturer is on 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.07Arm CapsComponent material provided by Certified Manufacturer under Supplement 1093. Verify manufacturer is on 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.08Steel XE "Castings: Steel" HardwareComponent material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.09Stainless XE "Stainless" Steel XE "Castings: Steel" Component material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.10Stainless XE "Stainless" Steel XE "Castings: Steel" HardwareComponent material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.11Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" Sheet and PlateComponent material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.12Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" ExtrusionsComponent material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.13Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" Tube and Pipe XE "Pipe" XE "Compaction: Pipe" Component material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.14Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" Castings XE "Castings" Component material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.15Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" ForgingsComponent material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.16Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" Welding XE "Welding" RodsNormally only applies to shop fabrication. If performing field aluminum welding contact District Testing and OMM for recommendations. Notify District Testing if rejecting material.730.17Aluminum XE "Paint: Aluminum" XE "Castings: Aluminum" XE "Aluminum" HardwareComponent material provided by Certified Manufacturer under Supplement 1092.Verify manufacturer is on 1092.Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.18Reflective Sheeting XE "Sheeting" Type FUse if certification provided. Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM..730.19Reflective Sheeting XE "Sheeting" Type GVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.191Reflective Sheeting XE "Sheeting" Type G rebondableVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.192Reflective Sheeting XE "Sheeting" Type HVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.193Reflective Sheeting XE "Sheeting" Type JVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.20Nonreflective Sheeting XE "Sheeting" Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.730.22Silk Screen InksNo field acceptance requirements.- part of 730.19,191,192 or 193 items.730.23Transparent Electronic Cuttable FilmsNo field acceptance requirements.- part of 730.19,191,192 or 193 items No field requirements.731.01Mercury XE "Lamps: Mercury" Vapor Luminaire XE "Luminaire" XE "Highway lighting: Luminaire" Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.731.03Changeable Message Sign, XE "Sign" Electrical TypeVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.731.05Internally Illuminated Fixed Message Sign XE "Sign" Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.731.06Sign XE "Sign" Flasher AssemblyVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.731.07School Speed Limit Sign XE "Sign" AssemblyVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.731.08Flexible Conduit XE "Conduit" Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.731.10Timer with EnclosureVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.01Vehicular Signal XE "Lamps: Signal" Heads, ConventionalVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.02Vehicular Signal XE "Lamps: Signal" Heads, Optically Programmed, 12-inch (300 mm) LensVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.03Vehicular Signal XE "Lamps: Signal" Heads, Optically Programmed, 8-inch (200 mm) LensVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.04 AOptically ProgrammedAnd Pedestrian Incandescent XE "Lamps: Incandescent" Signal XE "Lamps: Signal" Lamps XE "Lamps" XE "Highway lighting: Lamps" Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.04 BVehicular Signal XE "Lamps: Signal" Incandescent XE "Lamps: Incandescent" Lamps XE "Lamps" XE "Highway lighting: Lamps" Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.04 CVehicular and pedestrian light Emitting Diode Lamps XE "Lamps" XE "Highway lighting: Lamps" Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.05Pedestrian Signal XE "Lamps: Signal" Heads[Type A1][Type A2][Type D2]Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.06Pedestrian PushbuttonsVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.07 ALoop Detector Units Nema TS 1Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.07 BLoop Detector Units Nema TS 2Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.08Loop Detector Units, Delay and Extension TypeVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.09Magnetometer Detector UnitsVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.10Magnetometer Sensor ProbesVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.11Signal XE "Lamps: Signal" Supports XE "Supports" Check provided by Certified Manufacturer under Supplement 1094 Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.12Strain XE "Poles: Strain" Poles XE "Poles" Check provided by Certified Manufacturer under Supplement 1094 Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.13Wood XE "Posts: Wood" Poles XE "Poles" Check provided by Certified Manufacturer under Supplement 1072 Accept with TE-24.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.14Down Guy AssembliesVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.15PedestalsVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.16Conduit XE "Conduit" RisersSee 725.04 requirements.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.17Cable XE "Cable" Support AssembliesVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.18Messenger Wire XE "Wire" Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.19Cable XE "Cable" and Wire XE "Wire" Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.20Power ServiceSee 725.04 requirementsNotify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.732.21Disconnect Switch with EnclosureVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.733.02 AController Unit Type TS2/A1Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.733.02 BController Unit Type TS2/A2Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.733.02 CController Unit Type 170EVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.733.02 DController Unit Type 2070L and LCVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.733.03 ACabinet Type TS 1Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.733.03 BCabinet Type TS 2Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.733.03 CCabinet Type 332Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.733.03 DCabinet Type 334Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.733.03 ECabinet Type 336Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.733.04 ACabinet Riser for TS 1 – TS 2 cabinetField inspect for 1/4 aluminum thickness and accept.Notify District Testing if rejecting material.733.04 BCabinet Riser for Types 332, 334 or 336Verify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.733.05Flasher ControllerVerify type and brand name of material is on QPL at the time of use.Inspect for conformance to dimension and condition.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.733.06Controller, Master, Traffic XE "Traffic" ResponsiveAssure the same manufacturer as the supplied controller unit 733.02.Notify District Testing if rejecting material.733.07Remote Monitoring StationCompatible with the supplied 733.02 and 733.06 unit. Notify District Testing if rejecting material.740.02Traffic XE "Traffic" Paint XE "Paint" Verify material is on Approved List maintained by OMM.Accepted with TE-24.Inspect container for appropriate markings. Inspect material for uniform consistency.Document in CMS.If rejecting for performance provide 1 qt (1 L) sample and notify District.740.03Polyester XE "Pavement Markings: Polyester" Pavement XE "Pavement" XE "Concrete: Pavement" MarkingVerify material is on Approved List maintained by OMM.Accepted with TE-24.Inspect container for appropriate markings. Inspect material for uniform consistency.Document in CMS.If rejecting for performance provide 1 qt (1 L) sample and notify District.740.04Thermoplastic XE "Pavement Markings: Thermoplastic" Pavement XE "Pavement" XE "Concrete: Pavement" MarkingVerify material is on Approved List maintained by OMM.Accepted with TE-24.Inspect container for appropriate markings. Inspect material for uniform consistency.Document in CMS.If rejecting for performance provide 1 qt (1 L) sample and notify District.740.05Preformed Pavement XE "Pavement" XE "Concrete: Pavement" MarkingVerify material is on Approved List maintained by OMM.Accepted with TE-24.Inspect container for appropriate markings. Inspect material for uniform consistency.Document in CMS.If rejecting for performance provide 1 qt (1 L) sample and notify District.740.06Work Zone Pavement XE "Pavement" XE "Concrete: Pavement" Marking[Type 1 Removable][Type 2 Non-Removable]Materials accepted by Engineer XE "Authority of: Engineer" .Inspect material for uniform consistency.Document in CMS.If rejecting for performance provide 1 qt (1 L) sample and notify District.740.07Epoxy Pavement XE "Pavement" XE "Concrete: Pavement" Marking MaterialVerify material is on Approved List maintained by OMM.Accepted with TE-24.Inspect container for appropriate markings. Inspect material for uniform consistency.Document in CMS.If rejecting for performance provide 1 qt (1 L) sample and notify District740.08Heat-Fused Preformed Plastic Pavement XE "Pavement" XE "Concrete: Pavement" Marking MaterialVerify material is on Approved List maintained by OMM.Accepted with TE-24.Inspect container for appropriate markings. Inspect material for uniform consistency.Document in CMS.If rejecting for performance provide 1 qt (1 L) sample and notify District740.09 AGlass Beads XE "Pavement Markings: Glass Beads" – for 740.02Verify material is on Approved List maintained by OMM.Accepted with TE-24.Inspect container for appropriate markings. Inspect material for uniform consistency.Document in CMS.If rejecting for performance provide 1 qt (1 L) sample and notify District.740.09 BGlass Beads XE "Pavement Markings: Glass Beads" – for 740.03Verify material is on Approved List maintained by OMM.Accepted with TE-24.Inspect container for appropriate markings. Inspect material for uniform consistency.Document in CMS.If rejecting for performance provide 1 qt (1 L) sample and notify District.740.09 CGlass Beads XE "Pavement Markings: Glass Beads" – for 740.04Verify material is on Approved List maintained by OMM.Accepted with TE-24.Inspect container for appropriate markings. Inspect material for uniform consistency.Document in CMS.If rejecting for performance provide 1 qt (1 L) sample and notify District.740.09 DGlass Beads XE "Pavement Markings: Glass Beads" – for 740.07Verify material is on Approved List maintained by OMM.Accepted with TE-24.Inspect container for appropriate markings. Inspect material for uniform consistency.Document in CMS.If rejecting for performance provide 1 qt (1 L) sample and notify District.748.01Ductile Iron XE "Castings: Iron" Pipe XE "Pipe" , XE "Compaction: Pipe" Joints, and FittingsVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.748.02Polyvinyl Chloride (PVC) Pipe XE "Pipe" , XE "Compaction: Pipe" Joints, and FittingsVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.748.03Polyethylene (PE) Service Branches and FittingsVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.748.05Copper XE "Copper" Service Branches and FittingsVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.748.06Steel XE "Castings: Steel" Pipe XE "Pipe" XE "Compaction: Pipe" EncasementBasis of acceptance is certified test data containing documentation of domestic origin from manufacturer.Notify District Testing if rejecting material748.07Polyethylene EncasementVerify manufacturer certification conforms to ANSI/AWWA C105/A21.5Inspect condition, dimension, suitability for intended use.Notify District Testing if rejecting material.748.08Gate Valve and Valve BoxVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.748.09Inserting Valve and Valve BoxVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.748.10Cutting-in Sleeve, Valve, and Valve BoxVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.748.11Tapping Sleeve, Valve, and Valve BoxVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.748.12Tapping Saddle and Corporation StopVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.748.13Service Stop and Service Box Verify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM.748.14Meter, Setting, Stop, and ChamberInspect for condition, dimension, suitability for intended use.Acceptance XE "Acceptance" based on manufacturer’s statement of conformity.748.15Fire HydrantVerify type and brand name of material is on QPL at the time of use.Inspect for condition, dimension, suitability for intended use.Document in CMS.Notify District Testing if rejecting material.If material non-performs or looks defective during use notify District Testing and OMM. ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download