Mitsubishi Electric MSZ-FH Simple Remote Controller User Guide
[Pages:1]Simple Remote Controller User Guide MSZ-FH series
The remote controller has a simple, stylish design with emphasis on the use of straight lines. The unit can be turned on/off and the temperature adjusted with the cover closed.
C FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT
FAN
Press
to select fan speed.
Each press changes fan speed
in the following order:
(AUTO) (Silent) (Low) (Med.) (High) (Super High)
WIDE VANE
Press
to select horizontal airflow direction.
Each press changes airflow direction
in the following order:
(SWING)
L-VANE-R
Press
to select airflow direction.
Each press changes airflow direction in the following order:
(AUTO) (1) (2) (3) (4) (5) (SWING)
)FBUJOH PS$PPMJOH
PGUXPMPDBUJPOTVTJOH UIFEPVCMFWBOF
A SELECTING OPERATION MODES
1 Press
to start the operation.
2 Press
to select operation mode. Each press
changes mode in the following order:
(AUTO) (COOL) (DRY) (HEAT) (FAN)
A
3 Press
or
to set the temperature.
Each press raises or lowers the temperature by 1?C.
B CONVENIENT ONE-TOUCH FUNCTIONS
Press these buttons to toggle these functions on/off.
ECONO COOL
B
A swing pattern is used for airflow to create an enhanced
cooling sensation. This allows the temperature to be set 2?C
higher without any loss of comfort.
POWERFUL
D
Air conditioner operates at maximum capacity for 15 minutes.
i-save
Setting preferences can be saved and then activated in future uses simply by pressing the pressing the i-save button.
In normal heating mode, the lowest possible temperature setting is 16?C, but using i-save, this value can be set as low as 10?C.
Note: In the case of systems with multiple units (multi-systems), it is not
possible to set different operation modes for each unit. In addition, in some cases, it may not be possible to use certain functions.
PREPARATION BEFORE OPERATION (SETTING CURRENT TIME)
1 Press CLOCK button.
2 Press the TIME button to set the time.
3 Press the DAY button to set the day.
4 Press CLOCK again.
D What is "NATURAL FLOW"?
As time passes, airflow will become more like natural wind. The continuously gentle breeze provides enhanced comfort for occupants.
Press this button to toggle the function on/off.
F TIMER OPERATION
C
ON/OFF TIMER
1 Press
or
during operation to set the timer.
(ON timer) : The unit turns ON at the set time.
(OFF timer) : The unit turns OFF at the set time.
*
or
blinks.
* Make sure that the current time and day are set correctly.
E
2 Press
(Increase) and
time of timer.
(Decrease) to set the
Each press increases or decreases the set time by 10 minutes.
? Set the timer while
or
is blinking.
3 Press
or
again to cancel timer.
E What is "Air Purifying"? Virus
The purifier neutralizes bacteria as it passes through the plasma device.
Air Dust
Bacteria
1MBTNB TQBDF
Press this button to toggle the function on/off.
Neutralization/Sterilization Air
WEEKLY TIMER
1 Press
to enter the weekly timer setting mode.
2 Press
and
to select setting day and number.
3 Press
, , and to set ON/OFF, time, and temperature.
4 Press
to complete and transmit the weekly timer setting.
5 Press
to turn the weekly timer ON. (
lights.)
* When the weekly timer is ON, the day of the week whose timer setting is complete, will light.
Press again to turn the weekly timer OFF. ( goes out.)
Timer ON.
Change temp.
Timer OFF. Temp. setting: 27?C Temp. setting: 28?C
030
730 830
800 Wake up
2330 Go to bed
G i-see OPERATION
i-see control mode
1 Press during COOL, DRY,
HEAT and AUTO mode to activate i-see control mode.
? Press gently using a thin instrument. lights. (Operation display section)
F
? The default setting is "active".
2 Press again to activate
G
ABSENCE DETECTION.
?
lights. (Operation display section)
SENSOR
The sensor detects the floor temperature....
To avoid overcooling
To warm from the foot-level up
ABSENCE DETECTION
INDIRECT/DIRECT
When no-one is in the room, the unit automatically switches to energy-saving mode.
10 minutes after person leaves room
Press
to activate INDIRECT/DIRECT
mode. This mode is only available when the
i-see control mode is effective.
(INDIRECT) (DIRECT)
The unit monitors people......
Allowing indirect airflow
(OFF)
60 minutes after person leaves room
3 Press again to release
i-see control mode.
Enhance comfort by averting airflow away from people, or set direct airflow to target people for quick cooling/heating.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- mitsubishi ductless brochure cromwell energy
- operating instructions mitsubishi electric
- mitsubishi residential ductless air conditioners pdf
- instruction installation manual ductless mini split air
- model pumy p48nkmu1 bs ductless mini split air
- maintenance cost for mini split ductless air conditioner
- mitsubishi mr slim ductless air conditioners air
- mitsubishi electric msz fh simple remote controller user guide
- installation instructions r 410a ductless split system air
- trane ductless systems