Professional Societies



Khaled S. HatamlehE-mail: kshh@just.edu.joAddress: Mechanical Engineering Department Jordan University of Science & Technology Irbid, Jordan 22110Cell : 077.627.9608Office: +(962) 2-720-1000 ext:22639---------------------------------------------------------------------------------------------------------------------------- Personal Information:Nationality: Jordanian.Education:Doctor of Philosophy (Ph.D.), Mechanical Engineering, with GPA of 4.0, New Mexico State University (NMSU), Las Cruces, NM, USA, December, 2010. Dissertation title: “Development of a UAV Model Parameters Estimation Methodology with a Unique IMU”.Master of Science (M.Sc.), Industrial Automation Engineering, with GPA of 91.3, Computer Engineering Department, Hijjawi Faculty of Engineering Technology, Yarmouk University, JORDAN. June, 2006. Thesis Title: “System Identification and Control of a Radial Gas Turbine Driving a High Speed Alternator”.Bachelor of Science (B.Sc.), Mechanical Engineering and Technology (sub-branch Mechatronics Engineering), with a GPA of 76.0 (very good), Jordan University of Science & Technology (JUST), JORDAN, February, 2006. Project title: “Cars Cruise Control System”.Publications:Khaled S. Hatamleh, Angel Flores-Abad, Pu Xie, Gerardo Martinez, Brandi Herrera and Ou Ma. Development of an Inertial Measurement Unit for Unmanned Aerial Vehicles. In proceedings of the 7th Jordanian International Mechanical Engineering Conference (JIMEC’7), 27-29 September, 2010, Amman, Jordan.Khaled S. Hatamleh, Angel Flores-Abad, Pu Xie, Gerardo Martinez, Brandi Herrera and Ou Ma. Development of an Inertial Measurement Unit for Unmanned Aerial Vehicles. Jordan Journal of Mechanical and Industrial Engineering (JJMIE), 5(1): pp. 53-60, FEB, 2011. ISSN 1995-6665. . Khaled S. Hatamleh, Ou Ma and Robert Paz. A UAV Model Parameters Identification Method, AIAA Guidance Navigation and Control Conference, 2-5 August 2010, Toronto, Ontario Canada. S. Hatamleh, Ou Ma, and Robert Paz. A UAV parameters identification method: A simulation study. International Journal of information Acquisition, 6(4): pp.225-238, 2009. DOI: 10.1142/S0219878909001977. S. Hatamleh, Ou Ma, and Robert Paz. In flight UAV parameters identification: A simulation study. AIAA Atmospheric Flight Mechanics Conference and Exhibit, 10-13 August 2009. S. Hatamleh, Pu Xie, Gerardo Martinez, Jesse McAvoy, and Ou Ma. A UAV parameters identification method. AIAA Modeling & Simulation Technologies Conference and Exhibit, 10-13 August 2009. under review7- Khaled S. Hatamleh, Ou Ma, Angel Flores-Abad, and Pu Xie. Development of a Special Inertial Measurement Unit for UAV Applications. ASME Journal of Dynamic Systems Measurement and Control, October 2010.Professional experience:Current(since Sep-2011): Assistant Professor at the Mechanical Engineering Department of Jordan University of Science & Technology, Irbid, Jordan.June-2011 to Aug-2011: Faculty Assistant Professor at the mechatronics Engineering Department of the German Jordanian University, Amman, Jordan.Aug-2010 to May-2011: Faculty Assistant Professor at the Mechanical and Aerospace Engineering Department, New Mexico State University, Las Cruces, NM, USA. Teaching the courses of ME 234 (Dynamics), ME 329 (Engineering Analysis II) for the undergrad level, and the ME 580 (Engineering Analysis II) for the grad level.May, 2007 – December, 2010: Team Lead and Research Assistant of the Unmanned Aerial Vehicles (UAV) system identification research project at the Mechanical and Aerospace Engineering Department of NMSU supervised by Professor Ou Ma. The team consisted of three graduate and three undergraduate students.Fall 2008: Mechatronics course Instructor/TA (ME 487). Tutored and designed the course Lab experiments and supervised the course project; at the end of the course all of the students designed a line follower car robot using LEGO sets and low-cost off the shelf sensors/interfacing circuits.August, 2006 – August, 2007: Teaching Assistant at the Mechanical and Aerospace Engineering Department of New Mexico State University (NMSU) for the following courses:Solving Engineering Problems Using MatLab (ME 260).Introduction to Automation Design (ME 452 controls).Engineering Analysis II (ME 329 numerical methods). April, 2003 – July, 2006: Mechatronics LAB engineer at the Mechanical Engineering Department of Jordan University of Science and Technology (J.U.S.T); Taught and designed the LAB experiments for 7 semesters. The experiments included pneumatic/electro-pneumatic circuits design and implementation, electro-hydraulic circuits design and implementation, practical Microcontroller board’s programming/control/interface with several sensors and actuators, Fuzzy control, and Programmable Logical Controllers (PLCs). I also helped supervising several mechatronics related graduation projects of the undergrad students like the unmanned submarine project, the minesweeper project and the robotic arm project.December, 2002 – March, 2003: lecturer engineer in Al-Buthainah car training center, I was the chief engineer who trained 30 students on modern automotive technologies and maintenance procedures.June-August, 2001: Engineer under training (Arab Industrial Engineering Company, Al-Hassan industrial city, AL-Ramtha, Jordan).Professional SocietiesAmerican Institute of Aeronautics and Astronautics (AIAA).American Society of Mechanical Engineers (ASME)Technical Skills:Excellent experimental research experience. Preparing and conducted several experiments and tests in multiple areas, including but not limited to: rate gyro calibration, accelerometer calibration, sensor fusion, Inertial Measurement Unit (IMU) design/build/verification, image processing, camera calibration.Very good programming skills (MatLab, assembly, C, C++ & interactive C).Capable of designing electronically controlled mechanical systems by a microcontroller, PLCs and classical digital control circuits including the interfacing circuits.Very good skills in programming and running PLCs.Excellent knowledge in both pneumatic & hydraulic systems, also electro-hydraulic and electro-pneumatic ones.Excellent mechanical drawing skills using AutoCAD & Mechanical Desktop.Familiar with PC parallel port programming using C language.Excellent knowledge in sensor calibration and applications.Good communication skills, I also prefer team work atmospheres.Capable of using wide ranges of commercial software’s.Good knowledge of modern automotive technologies and control.I am a professional using the following engineering programs:Mathworks Matlab program, Control toolbox, Image Processing toolbox, signal processing block set, Fuzzy control toolbox and MatLab Simulink.Automation Studio, used to draw and simulate pneumatic, electro-pneumatic, hydraulic and electro-hydraulic circuits.RSlogix 500 starter English program, used to draw, simulate, and download the Allen Bradley PLC ladder logic programs.Thrisim program used to write and simulate and assemble the assembly language programs written for the Motorola 68HC11 microcontroller.AxIDE program, used to communicate with Motorola 68HC11 based microcontroller boards.Electrical work bench EWB program, used to draw and simulate designed digital electrical circuits.LaTex.Oral/Poster Presentation & Scientific/Social Outreach Activities:Hatamleh, K. "Development & Calibration of an Inertial Measurement Unit for UAV Applications", presentation at the Southwest Regional Technology Symposium, Las Cruces, NM. 15th April, 2010.Hatamleh, K. "Identification of UAV Dynamics Model Parameters", presentation at the Southwest Regional Technology Symposium, Las Cruces, NM. 16th April, 2009.Southwest Regional Technology Symposium, Las Cruces, NM, 2008 & 2009. Display Booth for the ongoing UAV research at NMSU.New Mexico State University UAS Technical Analysis and Applications Center (TAAC) 10th annual UAS conference, Tamaya Hyatt Regency Resort, Santa Ana Pueblo, NM, Dec. 9-11, 2008. Display Booth.Participant at the AUVSI's Unmanned Systems North America symposium, San Diego, CA, June, 2008.AIAA Modeling & Simulation Technologies Conference, Chicago, IL. Aug, 2009.AIAA Atmospheric Flight Mechanics Conference, Chicago, IL. Aug, 2009.Mentor for LEGO robot design and testing at Sierra Middle School MESA, Las Cruces, NM, since Oct, 2009. Hatamleh, K. “Unmanned Aerial Vehicles Dynamics Modeling & Parameter Estimation”. Poster presentation at the Graduate Research & Arts Symposium (GRAS), March, 2010. Las Cruces, NM.Related course work: Dynamics, Engineering Analysis II (Numerical Methods) for both the undergrad and grad levels, Advanced Linear controls, Robotics, PLCs, Industrial Automation, Image Processing, fuzzy control, Mechatronics, System Modeling, Digital circuit Design, Dynamics, Microcontrollers programming, Mechatronics System Design, Embedded Microcomputer Systems, CAD/CAM, Industrial Electronics & Instrumentation.Activities:Reading, jogging, basketball, soccer, racquetball & swimming.Teaching Philosophy StatementAfter being a student for over 2 decades and a teacher for about 8 years, I developed a picture of what I consider as my “teaching philosophy statement”.Teaching for me is a chance to pass the knowledge that I have gained to students and enhance my own as well. It feels wonderful when the students understand how to deploy the engineering concepts to real life applications; I believe this is achieved by introducing various related examples.I understand that students put more effort when they are inspired by the teacher; therefore I look forward to motivating my students by providing the required knowledge, guidance and help to solve challenging problems relying on their own skills. In turn, the student’s self-confidence will be elevated. My teaching philosophy includes assigning short and more frequent homework to keep a continuous follow up status with the progress of the course. I also believe that a reliable textbook and well prepared class notes are the perfect tools for a student to perform better and have a strong source to rely on for future needs.Moreover, I believe respect is an essential factor in the classroom. An instructor should treat his students the same way that he/she would like to be treated. I have seen that students tend to dislike the class when professors embarrass or individually address them. Through my experience as a teacher I learned how knowledge can always be acquired even during teaching, a sign that a person never stops learning as long as he/she lives.Research StatementI have done several research works in the areas of Mechatronics, System Identification, classical and fuzzy control, Parameter Estimation of Unmanned Aerial Vehicles, sensor calibration and utilization, visual servo control, and Inertial Measurement Units. In my PhD dissertation I introduced an in-flight method to estimate the parameters of a UAV’s dynamics model; I also introduced and verified a low-cost IMU that is capable of measuring the angular acceleration information. In the future I intend to continue researching in the UAV field. Moreover, I would like to start different Mechanical/Mechatronics based research studied that can be beneficial to the human life.References1Professor Ou MaMechanical and Aerospace Engineering DepartmentNew Mexico State University, Las Cruces, NM, 88003e-mail: oma@nmsu.eduPhone: (575) 646-65342Professor Tom BurtonChair, Mechanical and Aerospace Engineering DepartmentNew Mexico State University, Las Cruces, NM, 88003e-mail: tdburton@nmsu.eduPhone: (575) 646-35013Professor Robert PazKlipsch School of Electrical & Computer EngineeringNew Mexico State University, Las Cruces, NM, 88003e-mail: rpaz@nmsu.eduPhone: (575) 646-49334Professor Richard HillsSandia National Laboratories, New MexicoPO Box 5800 Albuquerque, NM 87185-(0828)e-mail: rhills@nmsu.eduPhone: (505)844-51855Professor Joseph GeninMechanical and Aerospace Engineering DepartmentNew Mexico State University, Las Cruces, NM, 88003e-mail: jgenin@nmsu.eduPhone: (575) 646-3809Current involved courses syllabiME 580 Engineering Analyses IISyllabusInstructor:Khaled HatamlehOffice : JH 513Phone : 575-646-2630E-mail: kshh@nmsu.eduOffice hours:10:20-12:20 WedGrades:Exams: 80%, Homework 20%Text:NonePolicy:Late work will be accepted up to 2 days late and will be penalized 20 % per day.Collaboration in the form of discussion of formulation of solution or results is encouraged for homework; however, each individual must work independently to create final homework solution.Collaboration in any form is NOT allowed for the Exams.OutlineInitial Value Methods (ODEs)Euler’s and Runge-Kutta MethodsSystem of ODEsMultistep MethodsOptimizationGradient BasedNonlinear Least SquaresEquality ConstraintsFinite Difference/Volume Methods (PDEs)Parabolic EquationsExplicit MethodImplicit MethodElliptical EquationsRelaxationNonlinear ProblemsFinite Volume MethodVerificationExam IIFinite Element Methods (PDEs)Weak Formulation (General 2nd order)Linear one-Dimensional ElementsAssemble of Elements.Triangular Elements.Quadrature (Incl. Boundaries)Transient problems.Exam IExam IIILinear AlgebraGauss Elimination (LU)Least SquaresQR DecompositionEigenvalues/EigenvectorsSingular Value DecompositionCourse InformationME 329 Engineering Analysis IISpring 2011INSTRUCTOR:Khaled S. Hatamleh Office: JH513 Phone: 646-2630 Email: kshh@nmsu.eduASSISTANTS:TBAOFFICE HOURS:10:30–11:30 Monday, FridayCATALOG DESCRIPTION:Numerical methods for roots of linear and nonlinear equations, numerical integration, and the solution of ordinary differential equations with emphasis on software design and engineering applications. PREREQUISITES:MATH 392 and M E 260.TEXT:1-Applied Numerical Methods with MATLAB for Engineers and Scientists, 2nd Ed. By Steven C. Chapra.CLASS SCHEDULE:Tuesday-Thursday 1:10 – 2:25 PM, Jett Hall 103.GRADES:50% Homework, 50% Exams and QuizzesCOURSE OBJECTIVES:Get the students to learn a variety of numerical methods that are useful in both basic and advanced engineering calculations.Enhance the student’s programming skills and critical thinking using ICS COVERED:Roots of Equations.Linear system of Equations.Nonlinear system of Equations.Interpolation and Curve fitting.Numerical Differentiation and Integration.Solution of Ordinary Differential Equations (ODEs).Solution of Partial Differential Equations (PDEs).RELATIONSHIP TO PROGRAM OBJECTIVES:Program Objective A- To prepare students for successful careers and lifelong learning.Program Objective B- To educate students thoroughly in methods of analysis, including mathematical and computational methods appropriate for engineers to use when solving problems.RELATIONSHIP TO PROGRAM OUTCOMES:ability to apply knowledge of math, science, and engineering k- ability to use techniques, skills and modern engineering tools for engineering practice.CONTRIBUTION TO PROFFESSIONAL COMPONENTS:PC2 – 1 year math and basic science.RELATIONSHIP TO ABET SPECIFIC CRITERIAME2 – the ability to apply advanced mathematics through multivariate calculus and differential equations.ME3 – familiarity with statistics and linear algebra.PLOICIES:Homework assignments must be turned in on time for Full credit.Homework will be accepted up to two days late with a 20% per day penalty.Collaboration in the form of discussion of formulation is encouraged for homework; however each individual must work independently to create the final homework solution.Collaboration in any form is NOT allowed for the quizzes and exams.Grades may be curved but the instructor makes NO commitment to do so.AUTHOR/DATEK. S. Hatamleh 01/12/2011Course Title ME 234 DynamicsSpring 2011INSTRUCTOR:K. HatamlehOffice:JH 513Phone:646-2630E-mail: kshh@nmsu.eduASSISTANT:TBAOFFICE HOURS:10:30-12:30 Monday, Friday or by appointmentCATALOG DISCRIPTION:Particle and rigid-body kinematics and kinetics utilizing vector and energy methods PREREQUISITES:Math 192, CE 233 or ME 236; (co-requisite Math 291)TEXT:Engineering Mechanics: Dynamics, 12th Ed, R. C. Hibbeler, Prentice Hall, 2009.CLASS SCHEDULE:9:30-10:20, MWF, JH 205GRADES:HomeworkTest #1Test #2Test #3Final Exam25%25%25%25%25%The three tests of highest scores will be considered for your final gradeCOURSE OBJECTIVES:To provide the students with a working knowledge of particle & rigid-body mechanics.To train the students’ abilities and skills in developing mathematical models (FBD) and in solving basic mechanics problems in a scientific and logical ICS COVERED:Dynamics of particles and rigid bodiesParticles Kinematics.Particles Kinetics.Rigid-Body Kinematics.Rigid-Body inertial properties.Rigid-Body Kinetics.Work and Mechanical Energy.Impulse-Momentum.Three-Dimensional Kinetics of a Rigid-Body (Optional).RELATIONSHIP TO PROGRAM OBJECTIVES:Program Objective A- To prepare students for successful careers and lifelong learning.Program Objective B- To educate students thoroughly in methods of analysis, including mathematical and computational methods appropriate for engineers to use when solving problems.CONTRIBUTION TO PROFESSIONAL COMPONENT:Introduces students to modern mathematical and computational methods involved in formulation, solving and interpreting the solution to engineering problems.POLICIES:Homework assignment is due at 5:00pm of the next class day immediately following the assigning class.No late homework assignments will be credited without permission from the instructor. (permission is only given for out-of-control circumstances )AUTHOR/DATEK. Hatamleh01/19/2011 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download