STOCK COLOR CHART - ALPOLIC

STOCK COLOR CHART

Choose the Highest Standard of Quality, Durability and Beauty

HIGH-PERFORMANCE FLUOROPOLYMER RESINS ? Our Lumi on? FEVE and Kynar? PVDF resins are the most advanced architectural coatings available, meeting or exceeding AAMA 2605 speci cations to deliver superior durability, weatherability and chemical resistance. Choose Lumi on? FEVE for the broadest color palette with a gloss range from matte to high luster.

SHORT RUN CAPABILITIES ? With our advanced die coating process and controlled curing, we can coil coat as little as 1,000 square feet of material in a broad choice of custom colors. You can count on the same color consistency, quality and lengthy warranty we offer for the largest orders. Gain practically unlimited design exibility, thanks to our ability to deliver short runs of custom colors in your choice of 40-, 50- or 62-inch widths.

GLOSS RANGE ? Different gloss levels can signi cantly change the eye's perception of color. If you would like a different gloss level than the sample you submit for color matching, let us know. We will work with you directly to ensure the gloss level you want is achieved.

FINISH DIRECTIONALITY ? For best color consistency, maintain the same directionality throughout design, estimation, fabrication and construction. We recommend ordering nishes for your entire job at one time, from one lot of material.

ROLL COATER

DIE COATER Die

2 Coat Solid/Mica 3 Coat Metallic/Prismatic

Color/Mica Primer Substrate

Core

Substrate Primer

Clear/Prismatic

Metallic/Color Primer Substrate

Core

Substrate Primer

LIGHT REFLECTANCE VALUE ? LRV numbers indicate the percentage of visible light re ected by the surface. This value is de ned in ASTM C609 as the Y value in an XYZ/ Yxy color space. While the LRV values shown on this chart are typical, there can be slight variations between individual lots.

SOLAR REFLECTANCE INDEX ? SRI numbers, as de ned by ASTM E1980 using 12 W/m2K values, indicate the material's re ectivity (how well it re ects back instead of absorbing radiant energy) and emissivity (how well it radiates absorbed heat back into the environment). The Cool Roof Rating Council (CRRC) requires an SRI value of 29 or greater for steep-slope roofs to earn a "Cool" rating. Most of our Architectural stock colors meet this requirement, and we have added "Cool" after the SRI value for easy reference.

Aluminum

DIE COATING VS. ROLL COATING Although widely used roll coaters can achieve adequate quality and ef ciency, our advanced die coaters permit direct coating on the aluminum surface to ensure smoother, ner nishes without roping marks.

For expert assistance with product availability, material selection, sizing and colors, please contact your local ALPOLIC? sales manager.

Exceptional projects demand exceptional products. For more than 40 years, ALPOLIC? has delivered premium metal composite materials that are durable, sustainable and truly remarkable.

We offer an extensive selection of rich, vibrant colors and styles for both painted and natural metal surfaces, working with you to bring your design intent to reality. Rigid, lightweight panels that fulfill your vision with a finish of enduring quality ? that's the beauty of ALPOLIC? materials.

Choose ALPOLIC? and bring your vision to life!

Architectural Stock Finishes and Colors

Specialty Stock Colors and Finishes

STOCK painted colors are available on 4mm-thick panels, with many of the most popular choices stocked in a selection of widths and lengths. Specify a polyethylene (PE) or fire-resistant (fr) core ? required by fire codes when building over 40 feet. Then choose a fluoropolymer paint finish offered in a variety of solid colors, metallics and micas. These panels are manufactured to architectural standards and stocked for immediate shipment.

ANODIZED panels are manufactured with 1100 alloy aluminum. They are available in both 50- and 62-inch widths with a stock clear anodized Class 1 finish or a choice of five custom Class 1 colors.

TIMBER SERIES finishes are produced using our proprietary image-transfer process in concert with Lumiflon? FEVE fluoropolymer coatings, providing exceptional protection with the classic beauty of stone or timber. We stock standard 62-inch panels for your immediate needs.

PRISMATIC finishes combine Lumiflon? FEVE fluoropolymer technology with specialized pigments to create unique colors and effects. The resulting finishes can make the surface glisten or even change colors with different lighting or the movement of the sun. Consult our Prismatic brochure to find the perfect color, gloss and effect for your design.

NATURAL METALS offer a traditional look in a state-of-the-art panel system. These 4mm panels offer your choice of metal surface while retaining the flatness and workability of aluminum composite.

DECORATIVE panels use specially treated aluminum surfaces with crystal-clear coats of Lumiflon? FEVE resin to protect the panels and maintain a pristine look, even in harsh exterior applications. HPA offers a polished shine, while HLZ has the look of brushed stainless steel.

Corporate Identity - Stock Program Colors

PROGRAM or 10 year nish warranty colors are stocked in the standard options shown, or can be custom-created for your unique project. We use the advanced Lumi on? FEVE

uoropolymer resin in two or three coats, or the Kynar? PVDF coating system to create a vivid, extremely durable nish in an astoundingrange of colors and glosses, including metallic and mica options. Panels are stocked in either 3mm or 4mm thickness.

MULTI-COLOR panels incorporate an advanced coating process engineered by ALPOLIC? to accommodate almost any color scheme. From bright and glossy to muted and subtle, these rich and versatile color systems can only be accomplished by combining Lumiflon? FEVE technology with our advanced die coil coating system. We can work with you to help you choose the perfect look to convey your message.

CUSTOM COLORS ? Bright, clean high-gloss colors, rich metallics, low-gloss earth tones, prismatic special effects and more: If you can imagine a color, we can make it real. Contact customer service to connect with our color experts.

30 Year Finish Warranty Architectural Stock Colors

SOLID

Stocked in 4mm unless otherwise stated

BNT Bone White 4-BNT-30 LRV 78.50/SRI 82-Cool

CRT Oyster 4-CRT-30 LRV 72.46/SRI 82-Cool

MST Mist White 4-MST-30 LRV 69.96/SRI 75-Cool

AGT Aluminum Grey 4-AGT-30 LRV 31.60/SRI 26

BGY Grey 4-BGY-50 LRV 10.41/SRI 7

CNC Charcoal 3-CNC-30 LRV 4.20 3&4mm

MICA

JBR Bronze 4-JBR-30 LRV 3.34/SRI 2

TOB Black 4-TOB-15 LRV 1.01/SRI 0

Order samples at samples

OPT Mica Platinum 4-OPT-50 LRV 30.88/SRI 53-Cool

M E TA L L I C

MNC Mica Anodic Clear 4-MNC-30 LRV 34.43/SRI 56-Cool

MCU Mica Champagne 4-MCU-30 LRV 22.61/SRI 38-Cool

MZG Mica Grey 4-MZG-50 LRV 7.95/SRI 14

MFS Mica Grey 4-MFS-30 LRV 13.41

BSX Metallic Silver 4-BSX-30 LRV 30.94/SRI 71-Cool

SMX Metallic Silver 4-SMX-30 LRV 36.59/SRI 63-Cool

CMX Metallic Champagne 4-CMX-30 LRV 31.19/SRI 59-Cool

MBX Metallic Bronze 4-MBX-30 LRV 31.20/SRI 40-Cool

DCX Metallic Copper 4-DCX-30 LRV 15.09/SRI 47-Cool

Premium Architectural Stock Finishes

NATURAL METALS

Call ALPOLIC? Customer Service for Warranty Details 800.422.7270 ANODIZED

Stainless 4-4HL LRV 21.84/SRI 34-Cool

Quartz Zinc 4-AZZ LRV 21.51/SRI 0

Copper 4-C12 LRV 5.03/SRI 55-Cool

Clear 4-CLR LRV 34.31/SRI 84-Cool

*Colors shown are as close to actual colors as allowed by the printing process. Mitsubishi Chemical Composites America, Inc. reserves the right to change or delete information herein without prior notice. Please refer to warranty details for exclusions and limitations. Additional warranty coverage may be given to some projects/products. Please call 800.422.7270 for more information.

20 Year Finish Warranty Stock Colors

SOLID

Stocked in 4mm unless otherwise stated

BBR Red 4-BBR-30 LRV 8.06 3&4mm

BTR Red 4-BTR-50 LRV 11.57 3&4mm

TOR Red 4-TOR-70 LRV 9.06

JLR Red 4-JLR-50 LRV 5.44

JXR Red 4-JXR-30 LRV 10.50

TRC Red 4-TRC-30 LRV 8.52

AUB Blue 4-AUB-50 LRV 3.25

CVB Blue 4-CVB-70 LRV 13.79

HNB Blue 4-HNB-50 LRV 16.78

RTB Blue 4-RTB-60 LRV 9.06

MBU Blue 4-MBU-30 LRV 10.59

HYB Blue 4-HYB-30 LRV 4.20

ABE Blue 4-ABE-70 LRV 23.73

AYW Yellow 4-AYW-70 LRV 61.77

TDR Green 4-TDR-70 LRV 24.40

RVW White 4-RVW-50 LRV 86.34

M AT T E

HWH White 4-HWH-50 LRV 80.8

COW White 4-COW-30 LRV 68.67

CVG Grey 4-CVG-50 LRV 14.38 3&4mm

MICA

BLX Black 4-BLX-30 LRV 0.89 3&4mm

M E TA L L I C

TBL Black 4-TBL-70 LRV 0.75 3&4mm

RRM River Rock Grey 4-RMM-6 LRV 23 SRI 17

TRM Terra Cotta 4-TRM-6 LRV 17 SRI 16.9

BSM Slate Black 4-BSM-6 LRV 5 SRI 1

MRO Anthracite Grey 4-MRO-70 LRV 3.33

PEX Pewter Metallic 4-PEX-30 LRV 20.63

TSZ Silver Metallic 4-TSZ-70 LRV 32.00

TBX Silver Metallic 4-TBX-30 LRV 38.75 3&4mm

*Colors shown are as close to actual colors as allowed by the printing process. Mitsubishi Chemical Composites America, Inc. reserves the right to change or delete information herein without prior notice. Please refer to warranty details for exclusions and limitations. Additional warranty coverage may be given to some projects/products. Please call 800.422.7270 for more information.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download