Release: Baseline - National Weather Service



Release: Baseline |Test Case Creation Engineer: Amanda Wu/Will Leverenz | |

|Title: Display Static and Animating Image Products |Date Test Case Created: 02/03/2006 |

|Test Case Execution Engineer: |Pass/Fail/Pending: |

|Test Platform: TBW3 (WFO), TBW4, TBDR, TBDW (SIT) |Total Test Time: |

|Start Date: |Run Time for processes or reports: |

|Complete Date: |Database Instance and Version: PostGres 7.4.8 |

|Logged in User’s Role: |Test Case Version Number: V2 |

|Notification Server Version: OB8.1 |Test Case Version Number Update Date: 08/07/06 |

|Last Modified By: Jim Richardson |Location of Test Artifacts for this test case: N/A |

|CI: GW | |

Test Case #: D2D_Prod_View_1.4.1.11

Test Case Description

This test case illustrates the capability of AWIPS to display and manipulate static and animated images as well as associated map backgrounds in both the large pane and the small panes

• Requirements

Not Applicable.

• Data Input:

Not Applicable.

• Prerequisite Conditions:

The tester must log into a workstation with a valid AWIPS username and password prior to starting the test.

|Step # |Action / Inputs |Expected Outputs |Pass(P)/ |DR #, Name, Description |Special Needs / Comments |

| | | |Fail(F) |for failed step | |

| | | |Pending (Pen) | | |

| |On the tool bar click on the Frames drop down button |The Frame count sets to 32. | | | |

| |and select 32. | | | | |

| |Select the Satellite menu and select WV/IR from the |The satellite image is displayed. | | | |

| |list. | | | | |

| |Select Station Plot from the METAR section of the Obs |The Station plot is overlaid on the satellite | | | |

| |menu. |image. Verify that the product legend in the | | | |

| | |bottom right of the large pane reflects the | | | |

| | |products selected. | | | |

| |Toggle on the Toggle looping icon in the toolbar. |The product loops through all 32 frames. | | | |

| |Select the Loop Properties icon in the toolbar. |The Loop Properties window opens. | | | |

| |In the Loop Properties window, use the Forward speed |The looping speed in the large pane changes | | | |

| |slide bar to change the forward looping speed. |accordingly. | | | |

| |Slide the Backward speed to the middle. |The image loops forward and backward. | | | |

| |Turn the Forward speed off, by sliding it to the far |The image in the large pane loops backward in | | | |

| |left (0). |time. | | | |

| |Slide the Forward speed to the middle. |The image in the large pane alternates between | | | |

| | |forward and backward looping | | | |

| |Slide the Backward speed, the First frame dwell, and |The backward looping speed and the dwell rates in | | | |

| |the Last frame dwell to the far right. |the large pane change accordingly. | | | |

| |Slide both dwell times to middle positions and the |Backwards animation is stopped, and forward | | | |

| |Backward speed to the far left (0). |animation continues with moderate dwell times. | | | |

| |Close the Loop Properties window by selecting the X |The Loop Properties window closes. | | | |

| |button. | | | | |

| |Toggle off the Toggle looping icon in the toolbar. Go |The frames move accordingly. | | | |

| |to the first frame in the loop by selecting | (forward) to go through frame by | | | | |

| |frame. Also, go through each frame backward using < | | | | |

| |(back). | | | | |

| |Stop on a frame, and write down the time on the product| | | | |

| |in that frame. | | | | |

| |Select and hold mouse button 3 (MB3) in the large pane.|A menu appears. | | | |

| |Select Skip This Frame to delete this frame from the | | | | |

| |loop. | | | | |

| |Step through the loop using the back () buttons from the toolbar to verify that the frame | | | | |

| |has been deleted. | | | | |

| |Select and hold MB3 over the large pane. |A menu appears. | | | |

| |From the menu, select Restore Skipped Frames and step |The deleted frame has been restored | | | |

| |through the loop using > (forward). | | | | |

| |Select MB2 anywhere in the large pane. |The display is magnified at 2x the original | | | |

| | |display centered on the point selected | | | |

| |Click MB3 in the top small pane. |The display in the small pane swaps positions with| | | |

| | |the display in the large pane. | | | |

| |Load one frame of a satellite product into the |The satellite products are loaded. | | | |

| |remaining small panes and a 4-panel satellite image in | | | | |

| |the large pane until all panes on the monitor have | | | | |

| |images in them. | | | | |

| |Place the mouse over the left border of the large pane.|The large pane has been resized. | | | |

| |Press and hold MB1 and drag to resize the large pane to| | | | |

| |a desired size. | | | | |

| |Using the same method, resize each of the small panes |All five panes have been resized. | | | |

| |to a desired size. | | | | |

| |Clear the large pane and all the small panes by |The large pane clears. | | | |

| |swapping them one by one into the large pane and | | | | |

| |selecting the Clear button | | | | |

| |For a WFO, select State(s) from the scale option. For |Map scale changes to State or RFC. | | | |

| |an RFC, select RFC. | | | | |

| |Select Comp Refl from the kxxx menu (where kxxx is a |The radar image is displayed in the large pane. | | | |

| |valid radar ingest). | | | | |

| |Select Station Plot from the METAR section of the Obs |The Station plot is overlaid on the radar image. | | | |

| |menu. | | | | |

| |Select MB2 anywhere in the large pane. |The display is magnified at 2x the original | | | |

| | |display centered on the point selected. | | | |

| |Select and hold MB2 and move the cursor directly to |The display is re-centered at the same zoom level | | | |

| |another position in the large pane before releasing the|according to the location on the screen where the | | | |

| |mouse button. |mouse button was released. | | | |

| |Press and hold MB1 over the title bar at the top of the|The D2D display moves around the monitor. | | | |

| |D2D display to move the window around the monitor. | | | | |

| |Click the minimize button near the top right corner of |The window is iconified (X Forecast Systems | | | |

| |the display. |Laboratory D-2D) along the workstation toolbar on | | | |

| | |the upper left side of the monitor. | | | |

| |Select the (X Forecast Systems Laboratory D-2D) icon in|The D2D window is restored. | | | |

| |the panel at the left of the screen. | | | | |

| |From the File menu, select Exit. |The D2D application closes. | | | |

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download