FUS-0435*; P-00981628.O; Citizens Tel. Co. of New ...
Technical Reference ManualOctober 2010State of Pennsylvania Act 129Energy Efficiency and Conservation Program&Act 213Alternative Energy Portfolio StandardsThis Page Intentionally Left BlankTable of Contents TOC \o "1-2" \h \z \u HYPERLINK \l "_Toc276631515" 1Introduction PAGEREF _Toc276631515 \h 1 HYPERLINK \l "_Toc276631516" 1.1Purpose PAGEREF _Toc276631516 \h 1 HYPERLINK \l "_Toc276631517" 1.2Definitions PAGEREF _Toc276631517 \h 1 HYPERLINK \l "_Toc276631518" 1.3General Framework PAGEREF _Toc276631518 \h 3 HYPERLINK \l "_Toc276631519" 1.4Algorithms PAGEREF _Toc276631519 \h 3 HYPERLINK \l "_Toc276631520" 1.5Data and Input Values PAGEREF _Toc276631520 \h 4 HYPERLINK \l "_Toc276631521" 1.6Baseline Estimates PAGEREF _Toc276631521 \h 5 HYPERLINK \l "_Toc276631523" 1.7Resource Savings in Current and Future Program Years PAGEREF _Toc276631523 \h 5 HYPERLINK \l "_Toc276631524" 1.8Prospective Application of the TRM PAGEREF _Toc276631524 \h 5 HYPERLINK \l "_Toc276631525" 1.9Electric Resource Savings PAGEREF _Toc276631525 \h 5 HYPERLINK \l "_Toc276631526" 1.10Post-Implementation Review PAGEREF _Toc276631526 \h 6 HYPERLINK \l "_Toc276631527" 1.11Adjustments to Energy and Resource Savings PAGEREF _Toc276631527 \h 6 HYPERLINK \l "_Toc276631528" 1.12Calculation of the Value of Resource Savings PAGEREF _Toc276631528 \h 7 HYPERLINK \l "_Toc276631529" 1.13Transmission and Distribution System Losses PAGEREF _Toc276631529 \h 7 HYPERLINK \l "_Toc276631530" 1.14Measure Lives PAGEREF _Toc276631530 \h 8 HYPERLINK \l "_Toc276631531" 1.15Custom Measures PAGEREF _Toc276631531 \h 8 HYPERLINK \l "_Toc276631532" 1.16Impact of Weather PAGEREF _Toc276631532 \h 8 HYPERLINK \l "_Toc276631533" 1.17Algorithms for Energy Efficient Measures PAGEREF _Toc276631533 \h 8 HYPERLINK \l "_Toc276631534" 2Residential Measures PAGEREF _Toc276631534 \h 10 HYPERLINK \l "_Toc276631535" 2.1Electric HVAC PAGEREF _Toc276631535 \h 11 HYPERLINK \l "_Toc276631536" 2.2Electric Clothes Dryer with Moisture Sensor PAGEREF _Toc276631536 \h 17 HYPERLINK \l "_Toc276631537" 2.3Efficient Electric Water Heaters PAGEREF _Toc276631537 \h 19 HYPERLINK \l "_Toc276631538" 2.4Electroluminescent Nightlight PAGEREF _Toc276631538 \h 23 HYPERLINK \l "_Toc276631539" 2.5Furnace Whistle PAGEREF _Toc276631539 \h 25 HYPERLINK \l "_Toc276631540" 2.6Heat Pump Water Heaters PAGEREF _Toc276631540 \h 29 HYPERLINK \l "_Toc276631541" 2.7Home Audit Conservation Kits PAGEREF _Toc276631541 \h 34 HYPERLINK \l "_Toc276631542" 2.8LED Nightlight PAGEREF _Toc276631542 \h 37 HYPERLINK \l "_Toc276631545" 2.9Low Flow Faucet Aerators PAGEREF _Toc276631545 \h 38 HYPERLINK \l "_Toc276631546" 2.10Low Flow Showerheads PAGEREF _Toc276631546 \h 42 HYPERLINK \l "_Toc276631547" 2.11Programmable Setback Thermostat PAGEREF _Toc276631547 \h 45 HYPERLINK \l "_Toc276631551" 2.12Room AC (RAC) Retirement PAGEREF _Toc276631551 \h 48 HYPERLINK \l "_Toc276631552" 2.13Smart Strip Plug Outlets PAGEREF _Toc276631552 \h 54 HYPERLINK \l "_Toc276631553" 2.14Solar Water Heaters PAGEREF _Toc276631553 \h 56 HYPERLINK \l "_Toc276631554" 2.15Water Heater Pipe Insulation PAGEREF _Toc276631554 \h 60 HYPERLINK \l "_Toc276631555" 2.16Residential Whole House Fans PAGEREF _Toc276631555 \h 63 HYPERLINK \l "_Toc276631556" 2.17Ductless Mini-Split Heat Pumps PAGEREF _Toc276631556 \h 65 HYPERLINK \l "_Toc276631557" 2.18Fuel Switching: DHW Electric to Gas PAGEREF _Toc276631557 \h 70 HYPERLINK \l "_Toc276631558" 2.19Fuel Switching: DHW Heat Pump to Gas PAGEREF _Toc276631558 \h 74 HYPERLINK \l "_Toc276631559" 2.20Fuel Switching: Electric Heat to Gas Heat PAGEREF _Toc276631559 \h 80 HYPERLINK \l "_Toc276631560" 2.21Ceiling / Attic and Wall Insulation PAGEREF _Toc276631560 \h 83 HYPERLINK \l "_Toc276631561" 2.22Refrigerator / Freezer Recycling and Replacement PAGEREF _Toc276631561 \h 87 HYPERLINK \l "_Toc276631562" 2.23Refrigerator/Freezer Retirement (and Recycling) PAGEREF _Toc276631562 \h 91 HYPERLINK \l "_Toc276631563" 2.24Residential New Construction PAGEREF _Toc276631563 \h 93 HYPERLINK \l "_Toc276631564" 2.25ENERGY STAR Appliances PAGEREF _Toc276631564 \h 97 HYPERLINK \l "_Toc276631565" 2.26ENERGY STAR Lighting PAGEREF _Toc276631565 \h 103 HYPERLINK \l "_Toc276631567" 2.27ENERGY STAR Windows PAGEREF _Toc276631567 \h 107 HYPERLINK \l "_Toc276631568" 2.28ENERGY STAR Audit PAGEREF _Toc276631568 \h 109 HYPERLINK \l "_Toc276631569" 2.29ENERGY STAR Refrigerator/Freezer Retirement PAGEREF _Toc276631569 \h 110 HYPERLINK \l "_Toc276631570" 2.30Home Performance with ENERGY STAR PAGEREF _Toc276631570 \h 112 HYPERLINK \l "_Toc276631571" 2.31ENERGY STAR Televisions (Versions 4.1 and 5.1) PAGEREF _Toc276631571 \h 116 HYPERLINK \l "_Toc276631572" 3Commercial and Industrial Measures PAGEREF _Toc276631572 \h 120 HYPERLINK \l "_Toc276631573" 3.1Baselines and Code Changes PAGEREF _Toc276631573 \h 120 HYPERLINK \l "_Toc276631574" 3.2Lighting Equipment Improvements PAGEREF _Toc276631574 \h 121 HYPERLINK \l "_Toc276631575" 3.3Premium Efficiency Motors PAGEREF _Toc276631575 \h 143 HYPERLINK \l "_Toc276631576" 3.4Variable Frequency Drive (VFD) Improvements PAGEREF _Toc276631576 \h 150 HYPERLINK \l "_Toc276631577" 3.5Variable Frequency Drive Improvement for Industrial Air Compressors PAGEREF _Toc276631577 \h 155 HYPERLINK \l "_Toc276631578" 3.6HVAC Systems PAGEREF _Toc276631578 \h 157 HYPERLINK \l "_Toc276631579" 3.7Electric Chillers PAGEREF _Toc276631579 \h 163 HYPERLINK \l "_Toc276631581" 3.8Anti-Sweat Heater Controls PAGEREF _Toc276631581 \h 166 HYPERLINK \l "_Toc276631582" 3.9High-Efficiency Refrigeration/Freezer Cases PAGEREF _Toc276631582 \h 170 HYPERLINK \l "_Toc276631622" 3.10High-Efficiency Evaporator Fan Motors for Reach-In Refrigerated Cases PAGEREF _Toc276631622 \h 173 HYPERLINK \l "_Toc276631623" 3.11High-Efficiency Evaporator Fan Motors for Walk-in Refrigerated Cases PAGEREF _Toc276631623 \h 179 HYPERLINK \l "_Toc276631624" 3.12ENERGY STAR Office Equipment PAGEREF _Toc276631624 \h 185 HYPERLINK \l "_Toc276631625" 3.13Smart Strip Plug Outlets PAGEREF _Toc276631625 \h 190 HYPERLINK \l "_Toc276631626" 3.14Beverage Machine Controls PAGEREF _Toc276631626 \h 192 HYPERLINK \l "_Toc276631627" 3.15High-Efficiency Ice Machines PAGEREF _Toc276631627 \h 194 HYPERLINK \l "_Toc276631628" 3.16Wall and Ceiling Insulation PAGEREF _Toc276631628 \h 197 HYPERLINK \l "_Toc276631632" 4Appendices PAGEREF _Toc276631632 \h 205 HYPERLINK \l "_Toc276631633" 4.1Appendix A: Measure Lives PAGEREF _Toc276631633 \h 205 HYPERLINK \l "_Toc276631634" 4.2Appendix B: Relationship between Program Savings and Evaluation Savings PAGEREF _Toc276631634 \h 209 HYPERLINK \l "_Toc276631635" 4.3Appendix C: Lighting Audit and Design Tool PAGEREF _Toc276631635 \h 210 HYPERLINK \l "_Toc276631639" 4.4Appendix D: Motor & VFD Audit and Design Tool PAGEREF _Toc276631639 \h 2111Introduction11.1Purpose11.2Definitions11.3General Framework31.4Algorithms31.5Data and Input Values41.6Baseline Estimates51.7Resource Savings in Current and Future Program Years51.8Prospective Application of the TRM51.9Electric Resource Savings51.10Post-Implementation Review61.11Adjustments to Energy and Resource Savings61.12Calculation of the Value of Resource Savings71.13Transmission and Distribution System Losses71.14Measure Lives81.15Custom Measures81.16Impact of Weather81.17Algorithms for Energy Efficient Measures92Residential Measures112.1Electric HVAC122.2Electric Clothes Dryer with Moisture Sensor182.3Efficient Electric Water Heaters202.4Electroluminescent Nightlight242.5Furnace Whistle262.6Heat Pump Water Heaters302.7Home Audit Conservation Kits352.8LED Nightlight382.9Low Flow Faucet Aerators392.10Low Flow Showerheads432.11Programmable Setback Thermostat462.12Room AC (RAC) Retirement492.13Smart Strip Plug Outlets552.14Solar Water Heaters572.15Water Heater Pipe Insulation612.16Residential Whole House Fans642.17Ductless Mini-Split Heat Pumps662.18Fuel Switching: DHW Electric to Gas712.19Fuel Switching: DHW Heat Pump to Gas752.20Fuel Switching: Electric Heat to Gas Heat812.21Ceiling / Attic and Wall Insulation842.22Refrigerator / Freezer Recycling and Replacement882.23Refrigerator/Freezer Retirement (and Recycling)922.24Residential New Construction942.25ENERGY STAR Appliances982.26ENERGY STAR Lighting1042.27ENERGY STAR Windows1082.28ENERGY STAR Audit1102.29ENERGY STAR Refrigerator/Freezer Retirement1112.30Home Performance with ENERGY STAR1132.31ENERGY STAR Televisions (Versions 4.1 and 5.1)1173Commercial and Industrial Measures1223.1Baselines and Code Changes1223.2Lighting Equipment Improvements1233.3Premium Efficiency Motors1463.4Variable Frequency Drive (VFD) Improvements1533.5Industrial Air Compressors with Variable Frequency Drives1573.6HVAC Systems1593.7Electric Chillers1653.8Anti-Sweat Heater Controls1703.9High-Efficiency Refrigeration/Freezer Cases1743.10High-Efficiency Evaporator Fan Motors for Reach-In Refrigerated Cases1783.11High-Efficiency Evaporator Fan Motors for Walk-in Refrigerated Cases1843.12ENERGY STAR Office Equipment1903.13Commercial Smart Strip Plug Outlets1944Appendices1964.1Appendix A: Measure Lives1964.2Appendix B: Relationship between Program Savings and Evaluation Savings2004.3Appendix C: Lighting Audit and Design Tool2014.4Appendix D: Motor & VFD Audit and Design Tool1List of Tables TOC \h \z \c "Table" HYPERLINK \l "_Toc276631640" Table 11: Periods For Energy Savings and Coincident Peak Demand Savings PAGEREF _Toc276631640 \h 6 HYPERLINK \l "_Toc276631641" Table 21: Residential Electric HVAC - References PAGEREF _Toc276631641 \h 14 HYPERLINK \l "_Toc276631642" Table 22: Calculation Assumptions PAGEREF _Toc276631642 \h 21 HYPERLINK \l "_Toc276631643" Table 23: Energy Savings and Demand Reductions PAGEREF _Toc276631643 \h 21 HYPERLINK \l "_Toc276631644" Table 24: Electroluminescent Nightlight - References PAGEREF _Toc276631644 \h 23 HYPERLINK \l "_Toc276631645" Table 25: Furnace Whistle - References PAGEREF _Toc276631645 \h 25 HYPERLINK \l "_Toc276631646" Table 26: EFLH for various cities in Pennsylvania (TRM Data) PAGEREF _Toc276631646 \h 26 HYPERLINK \l "_Toc276631647" Table 27: Assumptions and Results of Deemed Savings Calculations (Pittsburgh, PA) PAGEREF _Toc276631647 \h 27 HYPERLINK \l "_Toc276631648" Table 28: Assumptions and Results of Deemed Savings Calculations (Philadelphia, PA) PAGEREF _Toc276631648 \h 27 HYPERLINK \l "_Toc276631649" Table 29: Assumptions and Results of Deemed Savings Calculations (Harrisburg, PA) PAGEREF _Toc276631649 \h 27 HYPERLINK \l "_Toc276631650" Table 210: Assumptions and Results of Deemed Savings Calculations (Erie, PA) PAGEREF _Toc276631650 \h 28 HYPERLINK \l "_Toc276631651" Table 211: Assumptions and Results of Deemed Savings Calculations (Allentown, PA) PAGEREF _Toc276631651 \h 28 HYPERLINK \l "_Toc276631652" Table 212: Calculation Assumptions PAGEREF _Toc276631652 \h 31 HYPERLINK \l "_Toc276631653" Table 213: Energy Savings and Demand Reductions PAGEREF _Toc276631653 \h 33 HYPERLINK \l "_Toc276631654" Table 214: Calculation Assumptions PAGEREF _Toc276631654 \h 35 HYPERLINK \l "_Toc276631655" Table 215: LED Nightlight - References PAGEREF _Toc276631655 \h 37 HYPERLINK \l "_Toc276631656" Table 216: Calculation Assumptions PAGEREF _Toc276631656 \h 40 HYPERLINK \l "_Toc276631657" Table 217: Residential Electric HVAC - References PAGEREF _Toc276631657 \h 46 HYPERLINK \l "_Toc276631658" Table 218: Room AC Retirement - References PAGEREF _Toc276631658 \h 50 HYPERLINK \l "_Toc276631659" Table 219: RAC Retirement-Only EFLH and Energy Savings by City PAGEREF _Toc276631659 \h 51 HYPERLINK \l "_Toc276631660" Table 220: Preliminary Results from ComEd RAC Recycling Evaluation PAGEREF _Toc276631660 \h 53 HYPERLINK \l "_Toc276631661" Table 222: Calculation Assumptions PAGEREF _Toc276631661 \h 58 HYPERLINK \l "_Toc276631662" Table 223: Deemed Energy Savings by PA City PAGEREF _Toc276631662 \h 64 HYPERLINK \l "_Toc276631663" Table 224: DHP – Values and References PAGEREF _Toc276631663 \h 67 HYPERLINK \l "_Toc276631664" Table 225: Heating Zones PAGEREF _Toc276631664 \h 69 HYPERLINK \l "_Toc276631665" Table 227: Energy Savings and Demand Reductions PAGEREF _Toc276631665 \h 73 HYPERLINK \l "_Toc276631666" Table 228: Gas Consumption PAGEREF _Toc276631666 \h 73 HYPERLINK \l "_Toc276631667" Table 231: Gas Consumption PAGEREF _Toc276631667 \h 78 HYPERLINK \l "_Toc276631668" Table 232: Default values for algorithm terms PAGEREF _Toc276631668 \h 82 HYPERLINK \l "_Toc276631669" Table 233: Default values for algorithm terms PAGEREF _Toc276631669 \h 85 HYPERLINK \l "_Toc276631670" Table 234: EFLH, CDD and HDD by City PAGEREF _Toc276631670 \h 86 HYPERLINK \l "_Toc276631671" Table 235: Average Energy Savings for Appliances Collected for Pennsylvania EDCs PAGEREF _Toc276631671 \h 88 HYPERLINK \l "_Toc276631672" Table 236: Average Energy Savings PAGEREF _Toc276631672 \h 88 HYPERLINK \l "_Toc276631673" Table 237: Energy and Demand Savings PAGEREF _Toc276631673 \h 92 HYPERLINK \l "_Toc276631674" Table 238: Residential New Construction – References PAGEREF _Toc276631674 \h 94 HYPERLINK \l "_Toc276631675" Table 239: ENERGY STAR Homes: REMRate User Defined Reference Homes – References PAGEREF _Toc276631675 \h 95 HYPERLINK \l "_Toc276631676" Table 240: ENERGY STAR Homes: REMRate User Defined Reference Homes – References PAGEREF _Toc276631676 \h 96 HYPERLINK \l "_Toc276631677" Table 241: ENERGY STAR Appliances - References PAGEREF _Toc276631677 \h 99 HYPERLINK \l "_Toc276631678" Table 242: Energy Savings from ENERGY STAR Calculator PAGEREF _Toc276631678 \h 101 HYPERLINK \l "_Toc276631679" Table 243: ENERGY STAR Lighting - References PAGEREF _Toc276631679 \h 105 HYPERLINK \l "_Toc276631680" Table 244: ENERGY STAR Windows - References PAGEREF _Toc276631680 \h 108 HYPERLINK \l "_Toc276631681" Table 245: Refrigerator/Freezer Recycling – References PAGEREF _Toc276631681 \h 110 HYPERLINK \l "_Toc276631682" Table 246: ENERGY STAR TVs - References PAGEREF _Toc276631682 \h 116 HYPERLINK \l "_Toc276631683" Table 247: ENERGY STAR TVs Version 4.1 and 5.1 maximum power consumption PAGEREF _Toc276631683 \h 117 HYPERLINK \l "_Toc276631684" Table 249: Deemed energy savings for ENERGY STAR Version 4.1 and 5.1 TVs. PAGEREF _Toc276631684 \h 118 HYPERLINK \l "_Toc276631685" Table 250: Deemed coincident demand savings for ENERGY STAR Version 4.1 and 5.1 TVs. PAGEREF _Toc276631685 \h 119 HYPERLINK \l "_Toc276631686" Table 31: Hours of Use Groups Required per Building Type PAGEREF _Toc276631686 \h 127 HYPERLINK \l "_Toc276631687" Table 32: Hours of Use for Usage Groups PAGEREF _Toc276631687 \h 127 HYPERLINK \l "_Toc276631688" Table 33: ASHRAE 90.1-2007 Building Area Method PAGEREF _Toc276631688 \h 131 HYPERLINK \l "_Toc276631689" Table 34: ASHRAE 90.1-2007 Space-by-Space Method PAGEREF _Toc276631689 \h 132 HYPERLINK \l "_Toc276631690" Table 36: Interactive Factors and Other Lighting Variables PAGEREF _Toc276631690 \h 137 HYPERLINK \l "_Toc276631691" Table 37: Lighting Controls Assumptions PAGEREF _Toc276631691 \h 138 HYPERLINK \l "_Toc276631692" Table 310: Reference Specifications for Above Traffic Signal Wattages PAGEREF _Toc276631692 \h 141 HYPERLINK \l "_Toc276631693" Table 311: LED Exit Signs PAGEREF _Toc276631693 \h 141 HYPERLINK \l "_Toc276631694" Table 312: Building Mechanical System Variables for Premium Efficiency Motor Calculations PAGEREF _Toc276631694 \h 144 HYPERLINK \l "_Toc276631695" Table 313: Baseline Motor Efficiencies for PY1 and PY2 PAGEREF _Toc276631695 \h 145 HYPERLINK \l "_Toc276631696" Table 314: Baseline Motor Efficiencies-for PY3 and PY4 PAGEREF _Toc276631696 \h 146 HYPERLINK \l "_Toc276631697" Table 315: Stipulated Hours of Use for Motors in Commercial Buildings PAGEREF _Toc276631697 \h 147 HYPERLINK \l "_Toc276631698" Table 316: Notes for Stipulated Hours of Use Table PAGEREF _Toc276631698 \h 148 HYPERLINK \l "_Toc276631699" Table 317: Variables for VFD Calculations PAGEREF _Toc276631699 \h 152 HYPERLINK \l "_Toc276631700" Table 318: ESF and DSF for Typical Commercial VFD Installations PAGEREF _Toc276631700 \h 153 HYPERLINK \l "_Toc276631701" Table 320: Variables for AC and Heat Pumps PAGEREF _Toc276631701 \h 158 HYPERLINK \l "_Toc276631702" Table 322: Cooling and Heating EFLH for Erie, Harrisburg, and Pittsburgh PAGEREF _Toc276631702 \h 160 HYPERLINK \l "_Toc276631703" Table 323: Cooling and Heating EFLH for Williamsport, Philadelphia and Scranton PAGEREF _Toc276631703 \h 161 HYPERLINK \l "_Toc276631704" Table 324: Electric Chiller Variables PAGEREF _Toc276631704 \h 164 HYPERLINK \l "_Toc276631705" Table 325: Electric Chiller Baseline Efficiencies (IECC 2009) PAGEREF _Toc276631705 \h 164 HYPERLINK \l "_Toc276631706" Table 326: Chiller Cooling EFLH by Location PAGEREF _Toc276631706 \h 165 HYPERLINK \l "_Toc276631707" Table 327 Anti-Sweat Heater Controls – Values and References PAGEREF _Toc276631707 \h 168 HYPERLINK \l "_Toc276631708" Table 328 Recommended Fully Deemed Impact Estimates PAGEREF _Toc276631708 \h 169 HYPERLINK \l "_Toc276631709" Table 329: Refrigeration Cases - References PAGEREF _Toc276631709 \h 170 HYPERLINK \l "_Toc276631710" Table 330: Refrigeration Case Efficiencies PAGEREF _Toc276631710 \h 171 HYPERLINK \l "_Toc276631711" Table 333: Freezer Case Savings PAGEREF _Toc276631711 \h 171 HYPERLINK \l "_Toc276631712" Table 334: Variables for High-Efficiency Evaporator Fan Motor PAGEREF _Toc276631712 \h 174 HYPERLINK \l "_Toc276631713" Table 335: Variables for HE Evaporator Fan Motor PAGEREF _Toc276631713 \h 175 HYPERLINK \l "_Toc276631714" Table 336: Shaded Pole to PSC Deemed Savings PAGEREF _Toc276631714 \h 176 HYPERLINK \l "_Toc276631715" Table 337: PSC to ECM Deemed Savings PAGEREF _Toc276631715 \h 176 HYPERLINK \l "_Toc276631716" Table 338: Shaded Pole to ECM Deemed Savings PAGEREF _Toc276631716 \h 177 HYPERLINK \l "_Toc276631717" Table 339: Default High-Efficiency Evaporator Fan Motor Deemed Savings PAGEREF _Toc276631717 \h 177 HYPERLINK \l "_Toc276631718" Table 340: Variables for High-Efficiency Evaporator Fan Motor PAGEREF _Toc276631718 \h 180 HYPERLINK \l "_Toc276631719" Table 341: Variables for HE Evaporator Fan Motor PAGEREF _Toc276631719 \h 181 HYPERLINK \l "_Toc276631720" Table 342: PSC to ECM Deemed Savings PAGEREF _Toc276631720 \h 182 HYPERLINK \l "_Toc276631721" Table 343: Shaded Pole to ECM Deemed Savings PAGEREF _Toc276631721 \h 183 HYPERLINK \l "_Toc276631722" Table 344: Default High-Efficiency Evaporator Fan Motor Deemed Savings PAGEREF _Toc276631722 \h 183 HYPERLINK \l "_Toc276631723" Table 345: ENERGY STAR Office Equipment - References PAGEREF _Toc276631723 \h 187 HYPERLINK \l "_Toc276631724" Table 347: Effective Useful Life PAGEREF _Toc276631724 \h 189 HYPERLINK \l "_Toc276631725" Table 348: Smart Strip Calculation Assumptions PAGEREF _Toc276631725 \h 190 HYPERLINK \l "_Toc276631726" Table 349: Beverage Machine Controls Energy Savings PAGEREF _Toc276631726 \h 193 HYPERLINK \l "_Toc276631727" Table 350: Ice Machine Reference values for algorithm components PAGEREF _Toc276631727 \h 195 HYPERLINK \l "_Toc276631728" Table 351: Ice Machine Energy Usage PAGEREF _Toc276631728 \h 196 HYPERLINK \l "_Toc276631729" Table 352: Non-Residential Insulation – Values and References PAGEREF _Toc276631729 \h 198 HYPERLINK \l "_Toc276631730" Table 353: Ceiling R-Values by Building Type PAGEREF _Toc276631730 \h 200 HYPERLINK \l "_Toc276631731" Table 354: Wall R-Values by Building Type PAGEREF _Toc276631731 \h 200 HYPERLINK \l "_Toc276631732" Table 355: HVAC Baseline Efficiencies for Non-Residential Buildings PAGEREF _Toc276631732 \h 201 HYPERLINK \l "_Toc276631733" Table 356: Cooling EFLH for Erie, Harrisburg, and Pittsburgh PAGEREF _Toc276631733 \h 202Table 11: Periods For Energy Savings and Coincident Peak Demand Savings6Table 21: Residential Electric HVAC - References15Table 22: Calculation Assumptions22Table 23: Energy Savings and Demand Reductions22Table 24: Electroluminescent Nightlight - References24Table 25: Furnace Whistle - References26Table 26: EFLH for various cities in Pennsylvania (TRM Data)27Table 27: Assumptions and Results of Deemed Savings Calculations (Pittsburgh, PA)28Table 28: Assumptions and Results of Deemed Savings Calculations (Philadelphia, PA)28Table 29: Assumptions and Results of Deemed Savings Calculations (Harrisburg, PA)28Table 210: Assumptions and Results of Deemed Savings Calculations (Erie, PA)29Table 211: Assumptions and Results of Deemed Savings Calculations (Allentown, PA)29Table 212: Calculation Assumptions32Table 213: Energy Savings and Demand Reductions34Table 214: Calculation Assumptions36Table 215: LED Nightlight - References38Table 216: Calculation Assumptions41Table 217: Residential Electric HVAC - References47Table 218: Room AC Retirement - References51Table 219: RAC Retirement-Only EFLH and Energy Savings by City52Table 220: Preliminary Results from ComEd RAC Recycling Evaluation54Table 222: Calculation Assumptions59Table 223: Deemed Energy Savings by PA City65Table 224: DHP – Values and References68Table 225: Heating Zones70Table 226: Calculation Assumptions73Table 227: Energy Savings and Demand Reductions74Table 228: Gas Consumption74Table 229: Calculation Assumptions77Table 230: Energy Savings and Demand Reductions79Table 231: Gas Consumption79Table 232: Default values for algorithm terms83Table 233: Default values for algorithm terms86Table 234: EFLH, CDD and HDD by City87Table 235: Average Energy Savings for Appliances Collected for Pennsylvania EDCs89Table 236: Average Energy Savings89Table 237: Energy and Demand Savings93Table 238: Residential New Construction – References95Table 239: ENERGY STAR Homes: REMRate User Defined Reference Homes – References96Table 240: ENERGY STAR Homes: REMRate User Defined Reference Homes – References97Table 241: ENERGY STAR Appliances - References100Table 242: Energy Savings from Energy Star Calculator102Table 243: ENERGY STAR Lighting - References106Table 244: ENERGY STAR Windows - References109Table 245: Refrigerator/Freezer Recycling – References111Table 246: ENERGY STAR TVs - References117Table 247: ENERGY STAR TVs Version 4.1 and 5.1 maximum power consumption118Table 249: Deemed energy savings for ENERGY STAR Version 4.1 and 5.1 TVs.119Table 250: Deemed coincident demand savings for ENERGY STAR Version 4.1 and 5.1 TVs.120Table 31: Hours of Use Groups Required per Building Type129Table 32: Hours of Use for Usage Groups129Table 33: ASHRAE 90.1-2007 Building Area Method133Table 34: ASHRAE 90.1-2007 Space-by-Space Method134Table 35: Lighting EFLH and CF by Building Type or Function137Table 36: Interactive Factors and Other Lighting Variables140Table 37: Lighting Controls Assumptions141Table 38: Assumptions for LED Traffic Signals142Table 39: LED Traffic Signals143Table 310: Reference Specifications for Above Traffic Signal Wattages144Table 311: LED Exit Signs144Table 312: Building Mechanical System Variables for Premium Efficiency Motor Calculations147Table 313: Baseline Motor Efficiencies for PY1 and PY2148Table 314: Baseline Motor Efficiencies-for PY3 and PY4149Table 315: Stipulated Hours of Use for Motors in Commercial Buildings150Table 316: Notes for Stipulated Hours of Use Table151Table 317: Variables for VFD Calculations154Table 318: ESF and DSF for Typical Commercial VFD Installations155Table 319: Variables for Industrial Air Compressor Calculation157Table 320: Variables for AC and Heat Pumps160Table 321: HVAC Baseline Efficiencies161Table 322: Cooling and Heating EFLH for Erie, Harrisburg, and Pittsburgh162Table 323: Cooling and Heating EFLH for Williamsport, Philadelphia and Scranton163Table 324: Electric Chillers166Table 325: Chiller EFLH for Erie, Harrisburg, and Pittsburgh167Table 326: Chiller EFLH for Williamsport, Philadelphia and Scranton168Table 327 Anti-Sweat Heater Controls – Values and References172Table 328 Recommended Fully Deemed Impact Estimates173Table 329: Refrigeration Cases - References174Table 330: Refrigeration Case Efficiencies175Table 331: Refrigeration Case Savings (algorithm)175Table 332: Freezer Case Efficiencies175Table 333: Freezer Case Savings (algorithm)176Table 334: Refrigeration Case Savings176Table 335: Freezer Case Savings176Table 336: Variables for High-Efficiency Evaporator Fan Motor179Table 337: Variables for HE Evaporator Fan Motor180Table 338: Shaded Pole to PSC Deemed Savings181Table 339: PSC to ECM Deemed Savings181Table 340: Shaded Pole to ECM Deemed Savings182Table 341: Default High-Efficiency Evaporator Fan Motor Deemed Savings183Table 342: Variables for High-Efficiency Evaporator Fan Motor185Table 343: Variables for HE Evaporator Fan Motor186Table 344: PSC to ECM Deemed Savings187Table 345: Shaded Pole to ECM Deemed Savings188Table 346: Default High-Efficiency Evaporator Fan Motor Deemed Savings188Table 347: Energy Star Office Equipment - References191Table 349: Effective Useful Life193Table 350: Smart Strip Calculation Assumptions194IntroductionThe Technical Reference Manual (TRM) was developed to measure the resource savings from standard energy efficiency measures. The savings’ algorithms use measured and customer data as input values in industry-accepted algorithms. The data and input values for the algorithms come from Alternative Energy Portfolio Standards (AEPS) application forms, EDC program application forms, industry accepted standard values including (e.g. Energy StarENERGY STAR standards), or data gathered by Electric Distribution Companies (EDCs). The standard input values are based on the best available measured or industry data.The standard values for most commercial and industrial (C&I) measures are supported by end- use metering for key parameters for a sample of facilities and circuits, based on the metered data from past applications in other states. These C&I standard values are based on five years of data for most measures and two years of data for lighting. Some electric input values were derived from a review of literature from various industry organizations, equipment manufacturers, and suppliers. These input values are updated to reflect changes in code, federal standards and recent program evaluations.PurposeThe TRM was developed for the purpose of estimating annual electric energy savings and coincident peak demand reductions for a selection of energy efficient technologies and measures. The TRM provides guidance to the Administrator responsible for awarding Alternative Energy Credits (AECs). The revised TRM serves a dual purpose of being used to determine compliance with the AEPS Act, 73 P.S. §§ 1648.1-1648.8, and the energy efficiency and conservation requirements of Act 129 of 2008, 66 Pa.C.S. §?2806.1. The TRM will continue to be updated on an annual basis to reflect the addition of technologies and measures as needed to remain relevant and useful.Resource savings to be measured include electric energy (kWh) and electric capacity (kW) savings. The algorithms in this document focus on the determination of the per unit savings for the energy efficiency and demand response measures. The algorithms and methodologies set forth in this document must be used to determine EDC Reported Gross Savings and Evaluation Measurement and Verification (EM&V) Verified Savings.DefinitionsThe TRM is designed for use with both the AEPS Act and Act 129; however, it contains words and terms that apply only to the AEPS or only to Act 129. The following definitions are provided to identify words and terms that are specific for implementation of the AEPS:Administrator/Program Administrator (PA) – The Credit Administrator of the AEPS program that receives and processes, and approves AEPS Credit applications. AEPS application forms – application forms submitted to qualify and register alternative energy facilities for alternative energy credits. Application worksheets – part of the AEPS application forms.Alternative Energy Credits (AECs) – A tradable instrument used to establish, verify, and measure compliance with the AEPS. One credit is earned for each 1000kWh of electricity generated (or saved from energy efficiency or conservation measures) at a qualified alternative energy facility.EDC Estimated Savings – EDC estimated savings for projects and programs of projects which are enrolled in a program, but not yet completed and/or Measured and Verified (M&Ved).? The savings estimates may or may not follow a TRM or CMP method. The savings calculations/estimates may or may not follow algorithms prescribed by the TRM or Custom Measure Protocols (CMP) and are based on non-verified, estimated or stipulated values.? EDC Reported Gross Savings –?Also known as “EDC Claimed Savings”. EDC estimated savings for projects and programs of projects which are completed and/or Measured and Verified (M&Ved).? The estimates follow a TRM or CMP method.? The savings calculations/estimates follow algorithms prescribed by the TRM or CMP and are based non-verified, estimated, stipulated, EDC gathered or measured values of key variables. EM&V Verified Savings – Evaluator estimated savings for projects and programs of projects which are completed and for which the impact evaluation and EM&V activities are completed.? The estimates follow a TRM or CMP method.? The savings calculations/estimates follow algorithms prescribed by the TRM or CMP and are based on verified values of stipulated variables, EDC or evaluator gathered data, or measured key variables.Natural Equipment Replacement Measure – The replacement of equipment that has failed or is at the end of its service life with a model that is more efficient than required by the codes and standards in effect at the time of replacement, or is more efficient than standard practice if there are no applicable codes or standards.? The baseline used for calculating energy savings for natural equipment replacement measures is the applicable code, standard or standard practice.? The incremental cost for natural equipment replacement measures is the difference between the cost of baseline and more efficient equipment.? Examples of projects which fit in this category include replacement due to existing equipment failure, as well as replacement of equipment which may still be in functional condition, but which is operationally obsolete due to industry advances and is no longer cost effective to keep.New Construction Measure – The substitution of efficient equipment for standard baseline equipment which the customer does not yet own. ?The baseline used for calculating energy savings is the construction of a new building or installation of new equipment that complies with applicable code, standard and standard practice in place at the time of construction/installation.? The incremental cost for a new construction measure is the difference between the cost of the baseline and more efficient equipment.? Examples of projects which fit in this category include installation of a new production line, construction of a new building, or an addition to an existing facility.Realization Rate – The ratio of “EM&V Verified Savings” to “EDC Reported Gross Savings”.Retrofit Measure (Early Replacement Measure) – The replacement of existing equipment, which is functioning as intended and is not operationally obsolete, with a more efficient model primarily for purposes of increased efficiency.? ?Retrofit measures have a dual baseline: for the estimated remaining useful life of the existing equipment the baseline is the existing equipment; afterwards the baseline is the applicable code, standard and standard practice expected to be in place at the time the unit would have been naturally replaced.? If there are no known or expected changes to the baseline standards, the standard in effect at the time of retrofit is to be used.? The incremental cost is the full cost of equipment replacement.? In practice in order to avoid the uncertainty surrounding the determination of “remaining useful life” early replacement measure savings and costs sometimes follow natural equipment replacement baseline and incremental cost definitions.? Examples of projects which fit in this category include upgrade of an existing production line to gain efficiency, upgrade of an existing, but functional lighting or HVAC system that is not part of a renovation/remodeling project, replacement of an operational chiller, or installation of a supplemental measure such as adding a Variable Frequency Drive (VFD) to an existing constant speed motor.Substantial Renovation Measure – The substitution of efficient equipment for standard baseline equipment during the course of a major renovation project which removes existing, but operationally functional equipment. ?The baseline used for calculating energy savings is the installation of new equipment that complies with applicable code, standard and standard practice in place at the time of the substantial renovation.? The incremental cost for a substantial renovation measure is the difference between the cost of the baseline and more efficient equipment.? Examples include renovation of a plant which replaces an existing production line with a production line for a different product, substantial renovation of an existing building interior, replacement of an existing standard HVAC system with a ground source heat pump system. For the Act 129 program, EDCs may, as an alternative to using the energy savings’ values for standard measures contained in the TRM, submit documentation of alternative measurement methods to support different energy savings’ values. The alternative measurement methods are subject to review and approval by the Commission to ensure their accuracy.General FrameworkIn general, energy and demand savings will be measured estimated using measured and customer data as input values in algorithms in the TRM, and information from the AEPS application forms, worksheets and field tools.Three systems will work together to ensure accurate data on a given measure:The application form that the customer or customer’s agent submits with basic information.Application worksheets and field tools with more detailed, site-specific data, input values and calculations.Algorithms that rely on standard or site-specific input values based on measured data. Parts or all of the algorithms may ultimately be implemented within the tracking system, application forms and worksheets and field tools.AlgorithmsThe algorithms that have been developed to calculate the energy and or demand savings are typically driven by a change in efficiency level for between the installed energy efficient measure compared to aand the baseline level of efficiency. This change in efficiency is reflected in both demand and energy savings for electric measures and energy savings for gas. The following are the basic algorithms.kW Electric Demand Savings = kW = kWbaseline - kWenergy efficient measure= Demand SavingskWpeak = kW X CF= Coincident Peak Demand SavingskWh= kW X EFLH = Electric Annual Energy Savings = kW X EFLHElectric Peak Coincident Demand Savings = kW X Coincidence FactorWhere:kWbase = Connected load kW of baseline case.kWee = Connected load kW of energy efficient case.EFLH = Equivalent Full Load Hours of operation for the installed measure.CF = Demand Coincidence Factor, percentage of load connected during peak hours.Other resource savings will be calculated as appropriate.Specific algorithms for each of the measures may incorporate additional factors to reflect specific conditions associated with a measure. This may include factors to account for coincidence of multiple installations or interaction between different measures.Data and Input ValuesThe input values and algorithms are based on the best available and applicable data. The input values for the algorithms come from the AEPS application forms, EDC data gathering, or from standard values based on measured or industry data. Many input values, including site-specific data, come directly from the AEPS application forms, EDC data gathering, worksheets and field tools. Site-specific data on the AEPS application forms and EDC data gathering are used for measures with important variations in one or more input values (e.g., delta watts, efficiency level, capacity, etc.).Standard input values are based on the best available measured or industry data, including metered data, measured data from other state evaluations (applied prospectively), field data, and standards from industry associations. The standard values for most commercial and industrial measures are supported by end-use metering for key parameters for a sample of facilities and circuits. These standard values are based on five years of metered data for most measures. Data that were metered over that time period are from measures that were installed over an eight-year period. The original TRM included Mmany input values are based on program evaluations of New Jersey’s Clean Energy Programs or and other similar programs in the northeast region.For the standard input assumptions for which metered or measured data were not available, the input values (e.g., delta watts, delta efficiency, equipment capacity, operating hours, coincidence factors) were assumed based on the best available industry data or standards. These input values were based on a review of literature from various industry organizations, equipment manufacturers and suppliers.Baseline EstimatesFor all new construction and any replacement of non-working equipment appliance, the kW and kWh values are based on the vintage efficiency of the items being replacedstandard efficiency equipment versus new high-efficiency productsequipment. The approach used fFor early the replacement measures, the kW and kWh values are based on existing equipment versus new high-efficiency equipment. This approach encourages residential and business consumers to replace working inefficient equipment and appliances with new high-efficiency products rather than taking no action to upgrade or only replacing them with new standard-efficiency products. The baseline estimates used in the TRM are documented in baseline studies or other market information. Baselines will be updated to reflect changing codes, practices and market transformation effects.Resource Savings in Current and Future Program YearsA E Cs and energy efficiency and demand response reduction savings will apply in equal annual amounts corresponding to either PJM planning years or calendar years beginning with the year deemed appropriate by the Administrator, and lasting for the approved life of the measure for AEPS Credits. Energy efficiency and demand response savings associated with Act 129 can claim savings for up to fifteen years.Prospective Application of the TRMThe TRM will be applied prospectively. The input values are from the AEPS application forms, EDC program application forms, and EDC data gathering and standard input values (based on measured data including metered data and evaluation results). The TRM will be updated annually based on new information and available data and then applied prospectively for future program years. Updates will not alter the number of AEPS Credits, once awarded, by the Administrator, nor will it alter any energy savings or demand reductions already in service and within measure life.Electric Resource SavingsAlgorithms have been developed to determine the electric energy and coincident peak demand savings.Algorithms have been developed to determine the annual electric energy and electric coincident-peak demand savings.Annual electric energy savings are calculated and then allocated separately by season (summer and winter) and time of day (on-peak and off-peak). Summer coincident peak demand savings are calculated using a demand savings algorithm for each measure that includes a coincidence factor. Application of this coincidence factor converts the demand savings of the measure, which may not occur at time of system peak, to demand savings that is expected to occur during the Summer On-Peak periodtop 100 hours. This coincidence factor applies to the top 100 hours as defined in the Implementation Order as long as the EE&C measure class is operable during the summer peak hours.Table STYLEREF 1 \s 1 SEQ Table \* ARABIC \s 1 1 STYLEREF 1 \s 1 SEQ Table \* ARABIC \s 1 1 STYLEREF 1 \s 1 SEQ Table \* ARABIC \s 1 1 STYLEREF 1 \s 1 SEQ Table \* ARABIC \s 1 1: Periods For Energy Savings and Coincident Peak Demand SavingsPeriodEnergy SavingsCoincident Peak Demand SavingsSummerMay through SeptemberJune through SeptemberWinterOctober through AprilN/APeak8:00 a.m. to 8:00 p.m. Mon.-Fri.12:00 p.m. to 8:00 p.m.Off-Peak8:00 p.m. to 8:00 a.m. Mon.-Fri.,12 a.m. to 12p.m. Sat/Sun & holidaysN/AThe time periods for energy savings and coincident peak demand savings were chosen to best fit the Act 129 requirement, which reflects the seasonal avoided cost patterns for electric energy and capacity that were used for the energy efficiency program cost effectiveness purposes. For energy, the summer period May through September was selected based on the pattern of avoided costs for energy at the PJM level. In order to keep the complexity of the process for calculating energy savings’ benefits to a reasonable level by using two time periods, the knee periods for spring and fall were split approximately evenly between the summer and winter periods. For capacity, the summer period June through September was selected to match the period of time required to measure the 100 highest hours of demand. This period also correlates with the highest avoided costs’ time period for capacity. The experience in PJM has been that nearly all of the 100 highest hours of an EDC’s peak demand occur during these four months. Coincidence factors are used to determine the impact of energy efficiency measures on peak demand. Post-Implementation ReviewThe Administrator will review AEPS application forms and tracking systems for all measures and conduct field inspections on a sample of installations. For some programs and jobs projects (e.g., custom, large process, large and complex comprehensive design), post-installation review and on-site verification of a sample of AEPS application forms and installations will be used to ensure the reliability of site-specific savings’ estimates.Adjustments to Energy and Resource SavingsCoincidence with Electric System PeakCoincidence factors are used to reflect the portion of the connected load savings or generation that is coincident with the electric system peaktop 100 hours.Measure Retention and Persistence of SavingsThe combined effect of measure retention and persistence is the ability of installed measures to maintain the initial level of energy savings or generation over the measure life. Measure retention and persistence effects were accounted for in the metered data that were based on C&I installations over an eight-year period. As a result, some algorithms incorporate retention and persistence effects in the other input values. For other measures, if the measure is subject to a reduction in savings or generation over time, the reduction in retention or persistence is accounted for using factors in the calculation of resource savings (e.g., in-service rates for residential lighting measures).Interactive Measure Energy SavingsInteraction of energy savings is accounted for specific measures as appropriateInteraction of energy savings is accounted for as appropriate. For all other measures, interaction of energy savings is zero.For Residential New Construction, the interaction of energy savings is accounted for in the home energy rating tool that compares the efficient building to the baseline or reference building and calculates savings.For Commercial and Industrial Efficient Construction, the energy savings for lighting is increased by an amount specified in the algorithm to account for HVAC interaction. For commercial and industrial custom measures, interaction where relevant is accounted for in the site-specific analysis.Calculation of the Value of Resource SavingsThe calculation of the value of the resources saved is not part of the TRM. The TRM is limited to the determination of the per unit resource savings in physical terms at the customer meter.In order to calculate the value of the energy savings for reporting cost-benefit analyses and other purposes, the energy savings are determined at the customer level and then increased by the amount of the transmission and distribution losses to reflect the energy savings at the system level. The energy savings at the system level are then multiplied by the appropriate avoided costs to calculate the value of the benefits.System Savings = (Savings at Customer) X (T&D Loss Factor)Value of Resource Savings = (System Savings) X (System Avoided Costs ) + (Value of Other Resource Savings)The value of the benefits for a particular measure will also include other resource savings where appropriate. Maintenance savings will be estimated in annual dollars levelized over the life of the measure. The details of this methodology are subject to change by the TRC Working Group.Transmission and Distribution System LossesThe TRM calculates the energy savings at the customer meter level. These savings need to be increased by the amount of transmission and distribution system losses in order to determine the energy savings at the system level, which is required for value of resource calculations. The electric loss factor multiplied by the savings calculated from the algorithms will result in savings at the supply system level.The electric loss factor applied to savings at the customer meter is 1.11 for both energy and demand. The electric system loss factor was developed to be applicable to statewide programs. Therefore, average system losses at the margin based on PJM data were utilized. This reflects a mix of different losses that occur related to delivery at different voltage levels. The 1.11 factor used for both energy and capacity is a weighted average loss factor. These electric loss factors reflect losses at the margin.Measure LivesMeasure lives are provided in Appendix A for informational purposes and for use in other applications such as reporting lifetime savings or in benefit cost studies that span more than one year. For the purpose of calculating the total Total Resources Cost Test for Act 129, measures cannot claim savings for more than 15 years. Custom MeasuresCustom measures are considered too complex or unique to be included in the list of standard measures provided in the TRM. Also included are measures that may involve metered data, but require additional assumptions to arrive at a ‘typical’ level of savings as opposed to an exact measurement. To quantify savings for custom measures, a custom measure protocol must be followed. The qualification for and availability of AEPS Credits and energy efficiency and demand response savings are determined on a case-by-case basis. An AEPS application must be submitted, containing adequate documentation fully describing the energy efficiency measures installed or proposed and an explanation of how the installed facilities qualify for A E Cs. The AEPS application must include a proposed evaluation plan by which the Administrator may evaluate the effectiveness of the energy efficiency measures provided by the installed facilities. All assumptions should be identified, explained and supported by documentation, where possible. The applicant may propose incorporating tracking and evaluation measures using existing data streams currently in use provided that they permit the Administrator to evaluate the program using the reported data.To the extent possible, the energy efficiency measures identified in the AEPS application should be verified by the meter readings submitted to the Administrator.For further discussion, please see Appendix B.Impact of Weather To account for weather differences within Pennsylvania Equivalent Full Load Hours (ELFH) were taken from the US Department of Energy’s Energy StarENERGY STAR Calculator that provides ELFH values for seven Pennsylvania cities: Allentown, Erie, Harrisburg, Philadelphia, Pittsburgh, Scranton, and Williamsport. These cities provide a representative sample of the various climate and utility regions in Pennsylvania. Algorithms for Energy Efficient MeasuresThe following pages sections present measure-specific algorithms.This Page Intentionally Left BlankResidential MeasuresThe measurement method plan for determining residential high-efficiency cooling and heating equipment energy impact savings is based on algorithms that determine a central air conditioner’s or heat pump’s cooling/heating energy use and peak demand contribution. Input data is based both on fixed assumptions and data supplied from the high efficiency equipment AEPS application form or EDC data gathering. The algorithms also include the calculation of additional energy and demand savings due to the required proper sizing of high-efficiency units.The savings will be allocated to summer/winter and on-peak/off-peak time periods based on load shapes from measured data and industry sources. The allocation factors are documented below in the input value table.The algorithms applicable for this program measure the energy savings directly related to the more efficient hardware installation. Estimates of energy savings due to the proper sizing of the equipment are also included.The following is an explanation of the algorithms used and the nature and source of all required input data.Residential Electric HVACAlgorithmsCooling Energy Consumption and Peak Demand Savings – Central A/C and Air Source Heat Pump (ASHP) (High Efficiency Equipment Only)kWh= kWhcool + kWhheatkWhcoolEnergy Impact (kWh) = CAPY/1000 X (1/SEERb – 1/SEERq ) X EFLH kWhheat (ASHP Only)= CAPY/1000 X (1/HSPFb - 1/HSPFq ) X EFLHkWpeakPeak Demand Impact (kW) = CAPY/1000 X (1/EERb – 1/EERq ) X CF Heating Energy Savings – ASHPEnergy Impact (kWh) = CAPY/1000 X (1/HSPFb - 1/HSPFq ) X EFLH Cooling Energy Consumption and Demand Savings – Central A/C and ASHP (Proper Sizing)kWh= kWhcool kWhcoolEnergy Impact (kWh) = (CAPY/(SEERq X 1000)) X EFLH X PSFkWpeakPeak Demand Impact (kW) = ((CAPY/(EERq X 1000)) X CF) X PSF Cooling Energy Consumption and Demand Savings – Central A/C and ASHP (QIVQuality Installation)kWh= kWhcool kWhcool Energy Impact (kWh) = (((CAPY/(1000 X SEERq)) X EFLH) X (1-PSF) X QIFkWpeakPeak Demand Impact (kW) = ((CAPY/(1000 X EERq)) X CF) X (1-PSF) X QIFCooling Energy Consumption and Demand Savings – Central A/C and ASHP (Maintenance)kWh= kWhcool kWhcool Energy Impact (kWh) = ((CAPY/(1000 X SEERm)) X EFLH) X MFkWpeakPeak Demand Impact (kW) = ((CAPY/(1000 X EERm)) X CF) X MFCooling Energy Consumption and Demand Savings – Central A/C and ASHP (Duct Sealing)kWh= kWhcool kWhcool Energy Impact (kWh) = (CAPY/(1000 X SEERq)) X EFLH X DuctSFkWpeakPeak Demand Impact (kW) = ((CAPY/(1000 X EERq)) X CF) X DuctSFGround Source Heat Pumps (GSHP)kWh= kWhcool + kWhheatCooling Energy (kWh) SavingskWhcool = CAPY/1000 X (1/SEERb – (1/(EERg X GSER))) X EFLH kWhheatHeating Energy (kWh) Savings = CAPY/1000 X (1/HSPFb – (1/(COPg X GSOP))) X EFLH kWPeak Demand Impact (kW) = CAPY/1000 X (1/EERb – (1/(EERg X GSPK))) X CF GSHP DesuperheaterkWhEnergy (kWh) Savings = EDSH kWPeak Demand Impact (kW) = PDSH Furnace High Efficiency FankWh= kWhcool + kWhheatkWhcool= CFSkWhheatHeating Energy (kWh) Savings = ((Capyt X EFLHHT)/100,000 BTU/therm) X HFSCooling Energy (kWh) Savings = CFSDefinition of TermsCAPY = The cooling capacity (output in Btuh) of the central air conditioner or heat pump being installed. This data is obtained from the AEPS Application Form based on the model number or from EDC data gathering.SEERb = The Seasonal Energy Efficiency Ratio of the Baseline Unit.SEERq = The Seasonal Energy Efficiency Ratio of the qualifying unit being installed. This data is obtained from the AEPS Application Form or EDC’s data gathering based on the model number.SEERm = The Seasonal Energy Efficiency Ratio of the Unit receiving maintenanceEERb = The Energy Efficiency Ratio of the Baseline Unit.EERq = The Energy Efficiency Ratio of the unit being installed. This data is obtained from the AEPS Application Form or EDC data gathering based on the model number.EERg = The EER of the ground source heat pump being installed. Note that EERs of GSHPs are measured differently than EERs of air source heat pumps (focusing on entering water temperatures rather than ambient air temperatures). The equivalent SEER of a GSHP can be estimated by multiplying EERg by 1.02. GSER = The factor to determine the SEER of a GSHP based on its EERg. EFLH = The Equivalent Full Load Hours of operation for the average unit. ESF = The Energy Sizing Factor or the assumed saving due to proper sizing and proper installation. PSF = The Proper Sizing Factor or the assumed savings due to proper sizing of cooling equipment.QIF = The Quality Installation factor or assumed savings due to a verified quality installation of cooling equipment.MF = The Maintenance Factor or assumed savings due to completing recommended maintenance on installed cooling equipment.DuctSF = The Duct Sealing Factor or the assumed savings due to proper sealing of all cooling ducts.CF Demand Coincidence Factor= – Coincidence Factor. tThe percentage of the total HVAC connected load that is on during electric system’s peak window as defined in Section 1- Electric Resource Savings.= The coincidence factor which equates the installed unit’s connected load to its demand at time of system peak. DSF = The Demand Sizing Factor or the assumed peak-demand capacity saved due to proper sizing and proper installation. HSPFb = The Heating Seasonal Performance Factor of the Baseline Unit.HSPFq = The Heating Seasonal Performance Factor of the unit being installed. This data is obtained from the AEPS Application Form or EDC’s data gathering.COPg = Coefficient of Performance. This is a measure of the efficiency of a heat pump.GSOP = The fFactor to determine the HSPF of a GSHP based on its COPg. GSPK = The fFactor to convert EERg to the equivalent EER of an air conditioner to enable comparisons to the baseline unit. EDSH = Assumed savings per desuperheater. PDSH = Assumed peak-demand savings per desuperheater. Capyq = Output capacity of the qualifying heating unit in BTUs/hour.EFLHHT = The Equivalent Full Load Hours of operation for the average heating unit.HFS = Heating fan savings.CFS = Cooling fan savings.The 1000 used in the denominator is used to convert watts to kilowatts.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 1 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 1 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 1 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 1: Residential Electric HVAC - ReferencesComponentTypeValueSourcesCAPYVariableEDC Data GatheringAEPS Application; EDC Data GatheringSEERbFixedBaseline = 131SEERqVariableEDC Data GatheringAEPS Application; EDC Data GatheringSEERmFixed1015EERbFixedBaseline = 11.32EERqFixed(11.3/13) X SEERq2EERgVariableEDC Data GatheringAEPS Application; EDC’s Data GatheringEERmFixed8.6919GSERFixed1.023EFLHFixedAllentown Cooling = 784 HoursAllentown Heating = 2,492 HoursErie Cooling = 482 HoursErie Heating = 2,901 HoursHarrisburg Cooling = 929 HoursHarrisburg Heating = 2,371 HoursPhiladelphia Cooling = 1,032 HoursPhiladelphia Heating = 2,328 HoursPittsburgh Cooling = 737 HoursPittsburgh Heating = 2,380 HoursScranton Cooling = 621 HoursScranton Heating = 2,532 HoursWilliamsport Cooling = 659 HoursWilliamsport Heating = 2,502 Hours4ESFFixed2.9%5PSFFixed5%14QIFFixed9.2%4MFFixed10%20DuctSFFixed18%14CFFixed70%6DSFFixed2.9%7HSPFbFixedBaseline = 7.78HSPFqVariableEDC Data GatheringAEPS Application; EDC’s Data GatheringCOPgVariableEDC Data GatheringAEPS Application; EDC’s Data GatheringGSOPFixed3.4139GSPKFixed0.841610EDSHFixed1842 kWh11PDSHFixed0.34 kW12Cooling - CACTime Period Allocation FactorsFixedSummer/On-Peak 64.9%Summer/Off-Peak 35.1%Winter/On-Peak 0%Winter/Off-Peak 0%13Cooling – ASHPTime Period Allocation FactorsFixedSummer/On-Peak 59.8%Summer/Off-Peak 40.2%Winter/On-Peak 0%Winter/Off-Peak 0%13Cooling – GSHPTime Period Allocation FactorsFixedSummer/On-Peak 51.7%Summer/Off-Peak 48.3%Winter/On-Peak 0%Winter/Off-Peak 0%13Heating – ASHP & GSHPTime Period Allocation FactorsFixedSummer/On-Peak 0.0%Summer/Off-Peak 0.0%Winter/On-Peak 47.9%Winter/Off-Peak 52.1%13GSHP Desuperheater Time Period Allocation FactorsFixedSummer/On-Peak 4.5%Summer/Off-Peak 4.2%Winter/On-Peak 43.7%Winter/Off-Peak 47.6%13CapyqVariableEDC Data GatheringAEPS Application; EDC’s Data GatheringEFLHHFSFixedAllentown Heating = 2,492 HoursErie Heating = 2,901 HoursHarrisburg Heating = 2,371 HoursPhiladelphia Heating = 2,328 HoursPittsburgh Heating = 2,380 HoursScranton Heating = 2,532 HoursWilliamsport Heating = 2,5024HFSFixed0.5 kWh17CFSFixed105 kWh18Sources:Federal Register, Vol. 66, No. 14, Monday, January 22, 2001/Rules and Regulations, p. 7170-7200.Average EER for SEER 13 units.VEIC estimate. Extrapolation of manufacturer data.US Department of Energy, Energy StarENERGY STAR Calculator. Accessed 3/16/2009.Xenergy, “New Jersey Residential HVAC Baseline Study”, (Xenergy, Washington, D.C., November 16, 2001). Based on an analysis of six different utilities by Proctor Engineering. Xenergy, “New Jersey Residential HVAC Baseline Study”, (Xenergy, Washington, D.C., November 16, 2001).Federal Register, Vol. 66, No. 14, Monday, January 22, 2001/Rules and Regulations, p. 7170-7200. Engineering calculation, HSPF/COP=3.413.VEIC Estimate. Extrapolation of manufacturer data.VEIC estimate, based on PEPCo assumptions.VEIC estimate, based on PEPCo assumptions.Time period allocation factors used in cost-effectiveness analysis.Northeast Energy Efficiency Partnerships, Inc., “Benefits of HVAC Contractor Training”, (February 2006): Appendix C Benefits of HVAC Contractor Training: Field Research Results 03-STAC-01.Minimum Federal Standard for new Central Air Conditioners between 1990 and 2006.NJ utility analysis of heating customers, annual gas heating usage.Scott Pigg (Energy Center of Wisconsin), “Electricity Use by New Furnaces: A Wisconsin Field Study”, Technical Report 230-1, October 2003.Ibid., p. 34. ARI charts suggest there are about 20% more full load cooling hours in NJ than southern WI. Thus, average cooling savings in NJ are estimated at 95 to 115.The same EER to SEER ratio used for SEER 13 units applied to SEER 10 units. EERm = (11.3/13) * 10.VEIC estimate. Conservatively assumes less savings than for QIV because of the retrofit context.Electric Clothes Dryer with Moisture SensorMeasure NameElectric Clothes Dryer with Moisture Sensor RebateTarget SectorResidential EstablishmentsMeasure UnitClothes DryerUnit Energy Savings136 kWhUnit Peak Demand Reduction0.324047 kWMeasure Life11 yearsIntroductionClothes dryers with drum moisture sensors and associated moisture-sensing controls achieve energy savings over clothes dryers that do not have moisture sensors.EligibilityMeasure ApplicabilityThis measure requires the purchase of an electric clothes dryer with a drum moisture sensor and associated moisture-sensing controls. Energy StarENERGY STAR currently does not rate or certify electric clothes dryers.The TRM does not provide energy and demand savings for electric clothes dryers. The following sections detail how this measure’s energy and demand savings were determined.Savings CalculationsAlgorithmsEnergy SavingsThe annual energy savings of this measure was determined to be 136 kWh. This value was based on the difference between the annual estimated consumption of a standard unit without a moisture sensor as compared to a standard unit with a moisture sensor. This calculation is shown below:kWh= 905 - 769 = 136 kWhThe annual consumption of a standard unit without a moisture sensor (905 kWh) was based on 2008 estimates from Natural Resources Canada. The annual consumption of a standard unit with a moisture sensor (769 kWh) was based on estimates from EPRI and the Consumer Energy Center that units equipped with moisture sensors (and energy efficient motors, EPRI) are about 15% more efficient than units without.kWh = 905 - (905 * 0.15) = 769 kWhDemand SavingsThe annual demand savings of this measure was determined to be 0.346 kW. This value was based on the estimated energy savings divided by the estimated of annual hours of use. The estimated of annual hours of use was based on 392 loads per year with a 1 hour dry cycle. This calculation is shown below:kW = 136 / 392 = 0.346 kWThe demand coincidence factor of this measure was determined to be 0.136. This value was based on the assumption that 5 of 7 loads are run on peak days, 5 of 7 days the peak can occur on, 1.07 loads per day (7.5 per week, Reference #4), 45 minutes loads, and 3 available daily peak hours. This calculation is shown below:CF = (5/7) * (5/7) * (1.07) * (0.75) * (1/3) = 0.136The resulting demand savings based on this coincidence factor was determined to be 0.047 kW. This calculation is shown below:kWpeak= 0.346 * 0.136 = 0.047 kWThe assumptions used to determine this measure’s net demand value are listed below:On-peak Annual Hours of Operation Assumption =66.2% (May 2009 TRM)Summer Annual Hours of Operation Assumption =37.3% (May 2009 TRM)Measure LifeWe have assumed the measure life to be that of a clothes washer. The Database for Energy Efficiency Resources estimates the measure life of clothes washers at 11 years.Evaluation ProtocolThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings.Residential Efficient Electric Water HeatersMeasure NameResidential Efficient Electric Water HeatersTarget SectorResidential EstablishmentsMeasure UnitWater HeaterUnit Energy Savings133 kWh for 0.93 Energy Factor, 175 kWh, for 0.94 Energy Factor 217 kWh for 0.93, 217 kWh for 0.95 Energy Factor0.94,0.95 Energy FactorUnit Peak Demand Reduction 0.0122 kW for 0.93 Energy Factor, 0.0161 kW for 0.94 Energy Factor, 0.0199 kW for 0.93, 0.94,0.95 Energy FactorMeasure Life14 yearsIntroductionEfficient electric water heaters utilize superior insulation to achieve energy factors of 0.93 or above. Standard electric water heaters have energy factors of 0.9. Measure ApplicabilityEligibilityThis work paperprotocol documents the energy savings attributed to electric water heaters with Energy Factor of 0.93 or greater. The target sector primarily consists of single-family residences.Savings CalculationsAlgorithmsThe energy savings calculation utilizes average performance data for available residential efficient and standard water heaters and typical water usage for residential homes. The energy savings are obtained through the following formula:kWh Energy Savings = 1EFBase-1EFProposed×HW×365×8.3lbgal×Thot-Tcold3413BtukWhDemand savings result from reduced hours of operation of the heating element, rather than a reduced connected load. The demand reduction is taken as the annual energy savings multiplied by the ratio of the average energy usage during noon and 8PM on summer weekdays to the total annual energy usage.kWpeakDemand Savings = EnergyToDemandFactor×Energy SavingsThe Energy to Demand Factor is defined below:EnergyToDemandFactor = Average UsageSummer WD Noon-8Annual Energy UsageThe ratio of the average energy usage during noon and 8 PM on summer weekdays to the total annual energy usage is taken from load shape data collected for a water heater and HVAC demand response study for PJM. The factor is constructed as follows:1) Obtain the average kW, as monitored for 82 water heaters in PJM territory, for each hour of the typical day summer, winter, and spring/fall days. Weight the results (91 summer days, 91 winter days, 183 spring/fall days) to obtain annual energy usage.2) Obtain the average kW during noon to 8 PM on summer days from the same data. 3) The average noon to 8 PM demand is converted to average weekday noon to 8 PM demand through comparison of weekday and weekend monitored loads from the same PJM study. 4) The ratio of the average weekday noon to 8 PM energy demand to the annual energy usage obtained in step 1. The resulting number, 0.00009172, is the EnergyToDemandFactor.The load shapes (fractions of annual energy usage that occur within each hour) during summer week days are plotted in REF _Ref275542456 \h Figure 21 below.Figure STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 1 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 1: Load shapes for hot water in residential buildings taken from a PJM study.Definition of TermsThe parameters in the above equation are listed in REF _Ref274915225 \h Table 21 REF _Ref274915232 \h Table 22 below.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 2 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 2 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 2 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 2: Calculation AssumptionsComponentTypeValuesSource EFbase , Energy Factor of baseline water heaterFixed0.901EFproposed . Energy Factor of proposed efficient water heaterVariable>=.93Program DesignHW , Hot water used per day in gallonsFixed64.3 gallon/day2Thot , Temperature of hot waterFixed120 °F3Tcold , Temperature of cold water supplyFixed55 °F4EnergyToDemandFactorFixed0.000091721-4Sources:Federal Standards are 0.97 -0.00132 x Rated Storage in Gallons. For a 50-gallon tank this is approximately 0.90. “Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool Heaters” US Dept of Energy Docket Number: EE–2006–BT-STD–0129, p. 30Energy Conservation Program for Consumer Products: Test Procedure for Water Heaters”, Federal Register / Vol. 63, No. 90, p. 25996Many states have plumbing codes that limit shower and bathtub water temperature to 120 °F.Mid-Atlantic TRM, footnote #24Deemed SavingsThe deemed savings for the installation of efficient electric water heaters with various Energy Factors are listed below.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 3 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 3 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 3 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 3: Energy Savings and Demand ReductionsEnergy FactorEnergy Savings (kWh)Demand Reduction (kW)0.95 217 0.0199 0.94 175 0.0161 0.93 133 0.0122 Measure LifeAccording to an October 2008 report for the CA Database for Energy Efficiency Resources, an electric water heater’s lifespan is 14 yearsEvaluation ProtocolsThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings.Electroluminescent NightlightSavings from installation of plug-in electroluminescent nightlights are based on a straightforward algorithm that calculates the difference between existing and new wattage and the average daily hours of usage for the lighting unit being replaced. An “installation” rate is used to modify the savings based upon the outcome of participant surveys, which will inform the calculation. Demand savings is assumed to be zero for this measure.AlgorithmsSavings from installation of plug-in electroluminescent nightlights are based on a straightforward algorithm that calculates the difference between existing and new wattage and the average daily hours of usage for the lighting unit being replaced. An “installation” rate is used to modify the savings based upon the outcome of participant surveys, which will inform the calculation. Demand savings is assumed to be zero for this measure.The general form of the equation for the electroluminescent nightlight energy savings algorithm is:kWhTotal Savings = Number of Units X Savings per UnitElectricity Impact (kWh)= ((Winc * hinc) – (WNL * hNL)) * 365 / 1000 * ISRNLkWpeakDemand Impact (kW) = 0 (assumed)Deemed Energy Savings = ((7*12)–(0.03*24))*365/1000*0.84 = 25.53 kWh(Rounded to 26 kWh)WhereDefinition of Terms:WNL = Watts per electroluminescent nightlightWinc = Watts per incandescent nightlighthNL = Average hours of use per day per electroluminescent nightlighthinc = Average hours of use per day per incandescent nightlightISRNL = In-service rate per electroluminescent nightlight, to be revised through surveysTable STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 4 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 4 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 4 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 4: Electroluminescent Nightlight - ReferencesComponentTypeValueSourcesWNLFixed0.031WincFixed72hNLFixed243hincFixed122ISRNLVariable0.84PA CFL ISR valueMeasure Life (EUL)Fixed84Sources:Limelite Equipment Specification, Attached. Personal Communication, Ralph Ruffin, EI Products, 512-357-2776/ ralph@.Southern California Edison Company, “LED, Electroluminescent & Fluorescent Night Lights”, Work Paper WPSCRELG0029 Rev. 1, February 2009, p. 2 & p. 3.As these nightlights are plugged in without a switch, the assumption is they will operate 24 hours per day.Southern California Edison Company, “LED, Electroluminescent & Fluorescent Night Lights”, Work Paper WPSCRELG0029 Rev. 1, February 2009, p. 2 & p. 3.Furnace WhistleMeasure NameResidential Furnace WhistleTarget SectorResidential EstablishmentsMeasure UnitFurnace whistle (promote regular filter change-out)Unit Energy SavingsVariesUnit Peak Demand Reduction0Measure Life15Savings estimates are based on reduced furnace blower fan motor power requirements for winter and summer use of the blower fan motor. This furnace whistle measure applies to central forced-air furnaces, central AC and heat pump systems. Each table in this protocol (2 through 6) presents the annual kWh savings for each major urban center in Pennsylvania based on their respective estimated full load hours (EFLH). Where homes do not have A/C or heat pump systems for cooling, only the annual heating savings will apply.AlgorithmskWhElectricity Impact (kWh) = MkW X EFLH X EI X ISRkWpeakDemand Savings (kW) = 0Definition of TermsWhere:MkW = Average motor full load electric demand (kW)EFLH = Estimated Full Load Hours (Heating and Cooling) for the EDC region.EI – Efficiency ImprovementISR = In-service RateTable STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 5 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 5 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 5 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 5: Furnace Whistle - ReferencesComponentTypeValueSourcesMkWFixed0.5 kW1, 2EFLHFixed3117TRM Table 2-1EIFixed15%3ISRFixed.4744 Measure EULFixed1515Sources:The Sheltair Group HIGH EFFICIENCY FURNACE BLOWER MOTORS MARKET BASELINE ASSESSMENT provided BC Hydro cites Wisconsin Department of Energy [2003] analysis of electricity use from furnaces (see attached Blower Motor Furnace Study). The attached Blower Motor Study Table 17 (page 38) shows 505 Watts for PSC motors in space heat mode; last sentence of the second paragraph on page 38 states: " . . . multi-speed and single speed furnaces motors drew between 400 and 800 Watts, with 500 being the average value."Submitted to: Fred Liebich BC Hydro Tel. 604 453-6558 Email: fred.liebich@, March 31, 2004. 500 watts (.5 kW) times Pittsburgh heating and cooling FLH of 3117 = 1,558.5 kWh (we would expect Pittsburgh to have greater heating loads than the US generally, as referred to by the ACEEE through the Appliance Standards Awareness Project "Furnace fan systems blow warmed air through a home, using approximately 1,000 kilowatt hours of electricity per year . . . An estimated 95% of all residential air handlers use relatively inefficient permanent split capacitor (PSC) fan motors."FSEC, “Furnace Blower Electricity: National and Regional Savings Potential”, page 98 - Figure 1 (assumptions provided in Table 2, page 97) for a blower motor applied in prototypical 3-Ton HVAC for both PSC and BPM motors, at external static pressure of 0.8 in. w.g., blower motor Watt requirement is 452 Watts.US DOE Office of Energy Efficiency and Renewable Energy - "Energy Savers" publication - "Clogged air filters will reduce system efficiency by 30% or more.” Savings estimates assume the 30% quoted is the worst case and typical households will be at the median or 15% that is assumed to be the efficiency improvement when furnace filters are kept clean.The In Service Rate is taken from an SCE Evaluation of 2000-2001 Schools Programs, by Ridge & Associates 8-31-2001, Table 5-19 Installation rates, Air Filter Alarm 47.4%.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 6 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 6 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 6 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 6: EFLH for various cities in Pennsylvania (TRM Data)CityCooling load hoursHeating load hoursTotal load hoursPittsburgh73723803117Philadelphia103223283360Allentown78424923276Erie48229013383Scranton62125323153Harrisburg92923713300Williamsport65925023161The deemed savings are calculated assuming that an average furnace motor is 500 watts (.5 kW), using the Pittsburgh region as an example, furnace operating hours for Pittsburgh is 2380 hrs/year and cooling system operation is 737 hours/year. A 15% decrease in efficiency is attributed to the dirty furnace filters. The EFLH will depend on the EDC region in which the measure is installed.Without including correction for in-service rates, the 15% estimated blower fan annual savings of 178.5 kWh is 2.2% of average customer annual energy consumption of 8,221 kWh. The following table presents the assumptions and the results of the deemed savings calculations for each EDC.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 7 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 7 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 7 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 7: Assumptions and Results of Deemed Savings Calculations (Pittsburgh, PA)?Blower Motor kWPittsburgh EFLHClean Annual kWhDirty Annual kWh Furnace Whistle SavingsISREstimated Savings (kWh)Heating0.5238011901368.5178.50.47485Cooling0.5737369424550.47426Total?311715591792234?111Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 8 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 8 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 8 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 8: Assumptions and Results of Deemed Savings Calculations (Philadelphia, PA)?Blower Motor kWPhiladelphia EFLHClean Annual kWhDirty Annual kWh Furnace Whistle SavingsISREstimated Savings (kWh)Heating0.52328116413391750.47483Cooling0.51032516593770.47437Total?336016801932252?119Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 9 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 9 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 9 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 9: Assumptions and Results of Deemed Savings Calculations (Harrisburg, PA)?Blower Motor kWHarrisburg EFLHClean Annual kWhDirty Annual kWh Furnace Whistle SavingsISREstimated Savings (kWh)Heating0.523711185.513631780.47484Cooling0.5929465534700.47433Total?330016501898248?117Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 10 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 10 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 10 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 10: Assumptions and Results of Deemed Savings Calculations (Erie, PA)?Blower Motor kWErie EFLHClean Annual kWhDirty Annual kWh Furnace Whistle SavingsISREstimated Savings (kWh)Heating0.529011450.51668217.50.474103Cooling0.5482241277360.47417Total?338316921945254?120Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 11 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 11 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 11 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 11: Assumptions and Results of Deemed Savings Calculations (Allentown, PA)?Blower Motor kWAllentown EFLHClean Annual kWhDirty Annual kWh Furnace Whistle SavingsISREstimated Savings (kWh)Heating0.52492124614331870.47489Cooling0.5784392451590.47428Total?327616381884246?116Residential Heat Pump Water HeatersMeasure NameResidential Heat Pump Water HeatersTarget SectorResidential EstablishmentsMeasure UnitWater HeaterUnit Energy Savings2,202, 1,914 kWh for 2.3, 2.0 Energy FactorUnit Peak Demand Reduction 0.202, 0.175 kW for 2.3,2.0 Energy FactorMeasure Life14 yearsIntroductionHeat Pump Water Heaters take heat from the surrounding air and transfer it to the water in the tank, unlike conventional water heaters, which use either gas (or sometimes other fuels) burners or electric resistance heating coils to heat the water. Measure ApplicabilityEligibilityThis work paperprotocol documents the energy savings attributed to heat pump water heaters with Energy Factors of 2.0 to 2/3. The target sector primarily consists of single-family residences.Savings CalculationsAlgorithmsThe energy savings calculation utilizes average performance data for available residential heat pump and standard electric resistance water heaters and typical water usage for residential homes. The energy savings are obtained through the following formula:kWh Energy Savings =((EFBase)-1 - (EFProposed × FDerate)-1 )×HW×365×8.3×(Thot –Tcold)×3413-1For heat pump water heaters, demand savings result primarily from a reduced connected load. The demand reduction is taken as the annual energy savings multiplied by the ratio of the average energy usage during noon and 8PM on summer weekdays to the total annual energy usage.kWpeak Demand Savings=EnergyToDemandFactor×Energy SavingsThe Energy to Demand Factor is defined below:EnergyToDemandFactor =Average UsageSummer WD Noon-8Annual Energy UsageThe ratio of the average energy usage during noon and 8 PM on summer weekdays to the total annual energy usage is taken from load shape data collected for a water heater and HVAC demand response study for PJM. The factor is constructed as follows:Obtain the average kW, as monitored for 82 water heaters in PJM territory, for each hour of the typical day summer, winter, and spring/fall days. Weight the results (91 summer days, 91 winter days, 183 spring/fall days) to obtain annual energy usage.Obtain the average kW during noon to 8 PM on summer days from the same data. The average noon to 8 PM demand is converted to average weekday noon to 8 PM demand through comparison of weekday and weekend monitored loads from the same PJM study. The ratio of the average weekday noon to 8 PM energy demand to the annual energy usage obtained in step 1. The resulting number, 0.00009172, is the EnergyToDemandFactor.The load shapes (fractions of annual energy usage that occur within each hour) during summer week days are plotted for three business types in REF _Ref275542457 \h Figure 22 below.Figure STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 2 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 2: Load shapes for hot water in residential buildings taken from a PJM study.Definition of VariablesTermsThe parameters in the above equation are listed in REF _Ref274915443 \h Table 212 below.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 12 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 12 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 12 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 12: Calculation AssumptionsComponentTypeValuesSource EFbase , Energy Factor of baseline water heaterFixed0.904EFproposed . Energy Factor of proposed efficient water heaterVariable>=2.0Program DesignHW , Hot water used per day in gallonsFixed64.3 gallon/day5Thot , Temperature of hot waterFixed120 °F6Tcold , Temperature of cold water supplyFixed55 °F7FDerate, COP De-rating factor Fixed0.848, and discussion belowEnergyToDemandFactorFixed0.000091721-4Source:Deemed Savings Estimates for Legacy Air Conditioning and Water Heating Direct Load Control Programs in PJM Region. The report can be accessed online: , The average is over all 82 water heaters and over all summer, spring/fall, or winter days. The load shapes are taken from the fourth columns, labeled “Mean”, in tables 14,15, and 16 in pages 5-31 and 5-32The 5th column, labeled “Mean” of Table 18 in page 5-34 is used to derive an adjustment factor that scales average summer usage to summer weekday usage. The conversion factor is 0.925844. A number smaller than one indicates that for residential homes, the hot water usage from noon to 8 PM is slightly higher is the weekends than on weekdays.Federal Standards are 0.97 -0.00132 x Rated Storage in Gallons. For a 50-gallon tank this is approximately 0.90. “Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool Heaters” US Dept of Energy Docket Number: EE–2006–BT-STD–0129, p. 30“Energy Conservation Program for Consumer Products: Test Procedure for Water Heaters”, Federal Register / Vol. 63, No. 90, p. 25996 The temperatures are at 67.5 °F drybulb and 50% RH, which is °F 67.5 wetbulb. Many states have plumbing codes that limit shower and bathtub water temperature to 120 °F. Mid-Atlantic TRM, footnote #24The performance curve is adapted from Table 1 in performance curve depends on other factors, such as hot water set point. Our adjustment factor of 0.84 is a first order approximation based on the information available in literature. Heat Pump Water Heater Energy FactorThe Energy Factors are determined from a DOE testing procedure NOTEREF _Ref265666422 \h \* MERGEFORMAT Error! Bookmark not defined. that is carried out at 56 °F wetbulb temperature. However, the average wetbulb temperature in PA is closer to 45 °F. The heat pump performance is temperature dependent. The plot below shows relative coefficient of performance (COP) compared to the COP at rated conditions. According to the linear regression shown on the plot, the COP of a heat pump water heater at 45 °F is 0.84 of the COP at nominal rating conditions. As such, a de-rating factor of 0.84 is applied to the nominal Energy Factor of the Heat Pump water heaters.Figure STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 3 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 3 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 1: Dependence of COP on outdoor wetbulb temperature.Deemed SavingsThe deemed savings for the installation of heat pump electric water heaters with various Energy Factors are listed below.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 13 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 13 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 13 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 13: Energy Savings and Demand ReductionsEnergy FactorEnergy Savings (kWh)Demand Reduction (kW)2.3 2202 0.2022.0 1914 0.175 Measure LifeAccording to an October 2008 report for the CA Database for Energy Efficiency Resources, an electric water heater’s lifespan is 14 years.Evaluation ProtocolsThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings.Residential Home Audit Conservation KitsMeasure NameOutdoor Compact Fluorescent LampsHome Audit Conservation KitsTarget SectorResidential EstablishmentsMeasure UnitOne Energy Conservation KitUnit Energy SavingsVariable based on ISRUnit Peak Demand ReductionVariable based on ISRMeasure Life8.1 yearsIntroductionEnergy Conservation kits consisting of four CFLs, four faucet aerators, two smart power strips and two LED night lights are sent to participants of the Home Energy Audit programs. This document quantifies the energy savings associated with the energy conservation kits.Measure ApplicabilityEligibilityThe conservation kits are sent to residential customers only.Savings CalculationsAlgorithmsThe following algorithms are adopted from the Pennsylvania Public Utilities Commission’s Technical Reference Manual (TRM). The demand term has been modified to include the installation rate, which was inadvertently omitted in the TRM. kWh Electricity Impact (kWh) = NCFL × ((CFLwatts × (CFLhours × 365))/1000) × ISRCFL+ NAerator × SavingsAerator × ISRAerator+ NSmartStrip × SavingsSmartStrip × ISRSmartStrip+ NNiteLites × SavingsNiteLite × ISRNiteLitekWpeak Peak Demand Impact (kW) = NCFL × (CFLwatts/1000) × CF× ISRCFL+ NAerator × DemandReductionAerator × ISRAerator + NSmartStrip × DemandReductionSmartStrip × ISRSmartStrip + NNiteLite × DemandReductionNiteLite × ISRNiteLite Definition of VariablesTermsThe parameters in the above equations are listed in REF _Ref274915498 \h Table 214.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 14 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 14 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 14 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 14: Calculation AssumptionsComponentValueSource NCFL: Number of CFLs per kit4Program designCFLWatts, Difference between supplanted and efficient luminaire wattage (W)47Program Design ISR , In Service Rate or Percentage of units rebated that actually get usedvariableEDC Data GatheringCFLhours, hours of operation per day3.0PA TRM Table 4-3CF , CFL Summer Demand Coincidence Factor0.05PA TRM Table 4-3NAerator: Number of faucet aerators per kit4Program designNSmartStrip: Number of Smart Strips per kit2Program designSavingsAerator (kWh)61FE Interim TRMDemandReductionAerator (kW).006FE Interim TRMISRAeratorvariableEDC Data GatheringSavingsSmartStrip (kWh)184FE Interim TRMDemandReductionSmartStrip (kW).013FE Interim TRM ISRSmartStrip variableEDC Data GatheringSavingsNiteLite (kWh)26.3PA Interim TRMDemandReductionNiteLite (kW)0PA Interim TRM ISRNiteLite variableEDC Data GatheringNNiteLite2Program DesignPartially Deemed SavingsThe deemed energy and demand savings per kit are dependent on the measured ISRs for the individual kit components.Measure LifeThe measure life for CFLs is 6.4 years according to Energy StarENERGY STAR. The measure life of the Smart Strips are 5 years, and the measure life of the faucet aerators are 12 years. The weighted (by energy savings) average life of the energy conservation kit is 8.1 years.Evaluation ProtocolsThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings. The fraction of cases where a given measure has supplanted the baseline equipment constitutes the ISR for the measure.LED NightlightMeasure NameResidential LED NightlightTarget SectorResidential EstablishmentsMeasure UnitLED NightlightUnit Energy Savings22kWhUnit Peak Demand Reduction0kWMeasure Life8 yearsAlgorithmsAssumes a 1 Watt LED nightlight replaces a 7 Watt incandescent nightlight. The nightlight is assumed to operate 12 hours per day, 365 days per year; estimated useful life is 8 years (manufacturer cites 11 years 100,000 hours). Savings are calculated using the following algorithm:kWh Electricity Impact (kWh) = ((NLwatts X (NLhours X 365))/1000) x ISRkWpeak Demand Impact (kW) = 0 (assumed)Where: Definition of TermsNLwatts = Average delta watts per LED NightlightNLhours = Average hours of use per day per NightlightISR = In-service rate (The EDC EM&V contractors will reconcile the ISR through survey activities)Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 15 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 15 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 15 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 15: LED Nightlight - ReferencesComponentTypeValueSourcesNLwattsFixed6 WattsData GatheringNLhoursFixed121ISRFixed0.84PA CFL ISR valueEULFixed8 years1Electricity Savings = ((6 X (12 X 365))/1000) X 0.84 = 22.07 kWh (rounded to 22kWh)Sources:Southern California Edison Company, “LED, Electroluminescent & Fluorescent Night Lights”, Work Paper WPSCRELG0029 Rev. 1, February 2009, p. 2 & p. 3.Deemed SavingskWh = ((6 X (12 X 365))/1000) X 0.84 = 22.07 kWh (rounded to 22kWh)Low Flow Faucet AeratorsMeasure NameLow Flow Faucet AeratorsTarget SectorResidential Measure UnitAeratorUnit Energy Savings61 kWh Unit Peak Demand Reduction0.056 kWMeasure Life12 yearsIntroductionInstallation of low-flow faucet aerators is an inexpensive and lasting approach for water conservation. These efficient aerators reduce water consumption and consequently reduce hot water usage and save energy associated with heating the water. This protocolwork paper presents the assumptions, analysis and savings from replacing standard flow aerators with low-flow aerators in kitchens and bathrooms. Measure DescriptionThe low-flow kitchen aerator will save on the electric energy usage due to the reduced demand of hot water. The maximum flow rate of qualifying kitchen aerator is 1.5 gallons per minute. Measure ApplicabilityThis protocolwork paper documents the energy savings attributable to efficient low flow aerators in residential applications. The savings claimed for this measure are attainable in homes with standard resistive water heaters. Homes with non-electric water heaters do not qualify for this measure.Savings CalculationsThe energy savings and demand reduction obtain through the following calculations:kWhEnergy Impact (kWh) = ISR × [(FB – FP) ×TPerson-Day×NPersons×365×TL×UH×UE×Eff-1] / (F/home)kWpeakPeak Demand Impact (kW) = ISR ×Energy Impact × FEDThe Energy to Demand Factor, FED, is defined below:EnergyToDemandFactor = AverageUsageSummerWDNoon-8PM / AnnualEnergyUsageThe ratio of the average energy usage during noon and 8 PM on summer weekdays to the total annual energy usage is taken from load shape data collected for a water heater and HVAC demand response study for PJM. The load shapes (fractions of annual energy usage that occur within each hour) during summer week days are plotted for three business types in REF _Ref275542458 \h Figure 24 below.Figure STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 4 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 4 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 2: Load shapes for hot water in residential buildings taken from a PJM study.Definition of VariablesTermsThe parameters in the above equation are defined in REF _Ref274915554 \h Table 216.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 16 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 16 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 16 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 16: Calculation AssumptionsParameterDescriptionTypeValueSourceFBAverage Baseline Flow Rate of aerator (GPM)Fixed2.22FPAverage Post Measure Flow Rate of Sprayer (GPM)Fixed1.52TPerson-DayAverage time of hot water usage per person per day (minutes)Fixed 4.95 3NPerAverage number of persons per householdFixed2.484TAverage temperature differential between hot and cold water (?F)Fixed255UHUnit Conversion: 8.33BTU/(Gallons-°F)Fixed8.33ConventionUEUnit Conversion: 1 kWh/3413 BTUFixed1/3413ConventionEffEfficiency of Electric Water HeaterFixed0.902FEDEnergy To Demand FactorFixed0.000091721F/homeAverage number of faucets in the homeFixed3.56 ISR In Service RateVariableVariableEDC Data GatheringSources:Deemed Savings Estimates for Legacy Air Conditioning and Water Heating Direct Load Control Programs in PJM Region. The report can be accessed online: The summer load shapes are taken from tables 14,15, and 16 in pages 5-31 and 5-32, and table 18 in page 5-34 is used to derive an adjustment factor that scales average summer usage to summer weekday usage. The factor is constructed as follows: 1) Obtain the average kW, as monitored for 82 water heaters in PJM territory , for each hour of the typical day summer, winter, and spring/fall days. Weight the results (91 summer days, 91 winter days, 183 spring/fall days) to obtain annual energy usage. 2) Obtain the average kW during noon to 8 PM on summer days from the same data. 3) The average noon to 8 PM demand is converted to average weekday noon to 8 PM demand through comparison of weekday and weekend monitored loads from the same PJM study. 4) The ratio of the average weekday noon to 8 PM energy demand to the annual energy usage obtained in step 1. The resulting number, 0.00009172, is the EnergyToDemandFactor.Public Service Commission of Wisonsin Focus on Energy Evaluation Default Deemed Savings Review, June 2008. , Water-Efficient Single-Family New Home Specification, May 14, 2008.Pennsylvania Census of Population 2000: TRM No. 2008-53, pp. 273-274, 337, 367-368, 429-431.East Bay Municipal Utility District; "Water Conservation Market Penetration Study" SavingsThe deemed energy savings for the installation of a low flow aerator compared to a standard aerator is ISR × 61 kWh/year with a demand reduction of ISR × 0.056 kW, with ISR determined through data collection.Measure LifeThe measure life is 12 years, according to California’s Database of Energy Efficiency Resources (DEER).Evaluation ProtocolsThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings. Low Flow ShowerheadsMeasure NameResidential Low Flow ShowerheadsTarget SectorResidential EstablishmentsMeasure UnitWater HeaterUnit Energy Savings461 kWhPartially Deemed461 kWh for 1.5 GPM showerheadUnit Peak Demand Reduction0.042 kWPartially Deemed0.042 kW for 1.5 GPM showerheadMeasure Life9 yearsIntroductionThis measure relates to the installation of a low flow (generally 1.5 GPM) showerhead in bathrooms in homes with electric water heater. The baseline is a standard showerhead using 2.5 GPM.Measure ApplicabilityEligibilityThis protocol documents the energy savings attributable to replacing a standard showerhead with an energy efficient low flow showerhead for electric water heaters. The target sector primarily consists of residential residences.Savings CalculationsAlgorithmsThe annual energy savings are obtained through the following formula:kWh kWh savings = ((((GPMbase - GPMlow) / GPMbase) * people * gals/day * days/year) / showers) * lbs/gal * (TEMPft - TEMPin) / 1,000,000) / EF / 0.003412 ΔkWpeak = ΔkWh * CFEnergyToDemandFactorDefinition of TermsWhere:GPMbase =Gallons per minute of baseline showerhead = 2.5 GPMGPMlow =Gallons per minute of low flow showerhead = 1.5 GPMpeople =Average number of people per household = 2.48gals/day =Average gallons of hot water used by shower per day = 11.6days/year=Number of days per year = 365showers =Average number of showers in the home = 1.6lbs/gal =Pounds per gallon = 8.3TEMPft =Assumed temperature of water used by faucet = 120° FTEMPin =Assumed temperature of water entering house = 55° FEF =Recovery efficiency of electric hot water heater = 0.900.003412 =Constant to converts MMBtu to kWhThe summer coincident peak kW savings are calculated as follows:ΔkW = ΔkWh * CFWhere:ΔkWh =Annual kWh savings = 461kWh per fixture installedCFEnergyToDemandFactor =Summer peak coincidence factor for measure = 0.00009172ΔkWh =Annual kWh savings = 461kWh per fixture installed, for low flow showerhead with 1.5 GPMΔkW=Summer peak kW savings =0.042 kW.The demand reduction is taken as the annual energy savings multiplied by the ratio of the average energy usage during noon and 8PM on summer weekdays to the total annual energy usage. The Energy to Demand Factor, or Coincidence Factor, is defined as:EnergyToDemandFactor = Average UsageSummer WD Noon-8Annual Energy UsageThe ratio of the average energy usage during noon and 8 PM on summer weekdays to the total annual energy usage is taken from load shape data collected for a water heater and HVAC demand response study for PJM. The factor is constructed as follows:Obtain the average kW, as monitored for 82 water heaters in PJM territory, for each hour of the typical day summer, winter, and spring/fall days. Weight the results (91 summer days, 91 winter days, 183 spring/fall days) to obtain annual energy usage.Obtain the average kW during noon to 8 PM on summer days from the same data. The average noon to 8 PM demand is converted to average weekday noon to 8 PM demand through comparison of weekday and weekend monitored loads from the same PJM study, The ratio of the average weekday noon to 8 PM energy demand to the annual energy usage obtained in step 1. The resulting number, 0.00009172, is the Energy to Demand Factor, or Coincidence Factor.The load shapes (fractions of annual energy usage that occur within each hour) during summer week days are plotted in Figure 25 below.Figure STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 5 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 5 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 3: Load shapes for hot water in residential buildings taken from a PJM study.Deemed SavingsΔkWh = 461 kWh (assuming 1.5 GPM showerhead)ΔkW= 0.042 kW (assuming 1.5 GPM showerhead)Measure LifeAccording to the Efficiency Vermont Technical Reference User Manual (TRM), the expected measure life is 9 years.Evaluation ProtocolsThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings.Programmable Setback Thermostat Measure NameResidential ProgramProgrammable Setback ThermostatTarget SectorResidential EstablishmentsMeasure UnitProgrammable Setback ThermostatUnit Energy SavingsVariesUnit Peak Demand ReductionVaries Measure Life11Programmable thermostats are used to control heating and/or cooling loads in residential buildings by setting back the temperature during specified unoccupied and nighttime hours. These units are expected to replace a manual thermostat and the savings assume an existing ducted HVAC system; however, the option exists to input higher efficiency levels if coupled with a newer unit. The EDCs will strive to educate the customers to use manufacturer default setback and setup settings.AlgorithmskWh Energy Impact (kWh) = (CAPCOOL X (12/(EERCOOL x Effduct) X EFLH X ESFCOOL) + (CAPHEAT X (1/(EERHEAT X 3.41 X Effduct)) X EFLH X ESFHEAT)kWpeak Peak Demand Savings Impact (kW) = none0Where:Definition of TermsCAPCOOL = capacity of the air conditioning unit in tons, based on nameplate capacityEERCOOL,HEAT = Seasonally averaged efficiency rating of the baseline unit . For units > 65,000 BTUh, refer to Commercial application. Effduct = duct system efficiencyESFCOOL,HEAT = energy savings factor for cooling and heating, respectively CAPHEAT = nominal rating of the heating capacity of the electric furnace (kBtu/hr)EFLH = equivalent full load hoursTable STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 17 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 17 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 17 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 17: Residential Electric HVAC - ReferencesComponentTypeValueSourcesCAPCOOLVariableNameplate dataEDC Data GatheringDefault: 3 tons1EERCOOL, HEATVariableNameplate dataEDC Data GatheringDefault: Cooling = 10 SEERDefault: Heating = 1.0 (electric furnace COP)2EffductFixed0.83ESFCOOLFixed2%4ESFHEATFixed3.6%5CAPHEATVariableNameplate DataEDC Data GatheringDefault: 36 kBTU/hr1EFLHFixedAllentown Cooling = 784 HoursAllentown Heating = 2,492 HoursErie Cooling = 482 HoursErie Heating = 2,901 HoursHarrisburg Cooling = 929 HoursHarrisburg Heating = 2,371 HoursPhiladelphia Cooling = 1,032 HoursPhiladelphia Heating = 2,328 HoursPittsburgh Cooling = 737 HoursPittsburgh Heating = 2,380 HoursScranton Cooling = 621 HoursScranton Heating = 2,532 HoursWilliamsport Cooling = 659 HoursWilliamsport Heating = 2,502 Hours6Measure Life (EUL)Fixed117Sources:Average size of residential air conditioner or furnace.Minimum Federal Standard for new Central Air Conditioners/Heat Pumps between 1990 and 2006.New York Standard Approach for Estimating Energy Savings from Energy Efficiency Measures in Commercial and Industrial Programs, September 1, 2009.DEER 2005 cooling savings for climate zone 16, assumes a variety of thermostat usage patterns.“Programmable Thermostats. Report to KeySpan Energy Delivery on Energy Savings and Cost Effectiveness”, GDS Associates, Marietta, GA. 2002. 3.6% factor includes 56% realization rate.US Department of Energy, ENERGY STAR Calculator. Accessed 3/16/2009.New York Standard Approach for Estimating Energy Savings from Energy Efficiency Measures in Commercial and Industrial Programs, September 1, 2009, based on DEER.Room AC (RAC) RetirementMeasure NameResidential Room A/C RetirementTarget SectorResidential EstablishmentsMeasure UnitRoom A/C Unit Energy SavingsVariesUnit Peak Demand ReductionVariesMeasure Life4This measure is defined as retirement and recycling without replacement of an operable but older and inefficient room AC (RAC) unit that would not have otherwise been recycled. The assumption is that these units will be permanently removed from the grid rather than handed down or sold for use in another location by another EDC customer, and furthermore that they would not have been recycled without this program. This measure is quite different from other energy-efficiency measures in that the energy/demand savings is not the difference between a pre- and post- configuration, but is instead the result of complete elimination of the existing RAC. Furthermore, the savings are not attributable to the customer that owned the RAC, but instead are attributed to a hypothetical user of the equipment had it not been recycled. Energy and demand savings is the estimated energy consumption of the retired unit over its remaining useful life (RUL). The hypothetical nature of this measure implies a significant amount of risk and uncertainty in the energy and demand impact estimates.AlgorithmsThe energy and demand impacts are based on corrected Energy StarENERGY STAR calculator EFLH values for the ES Room AC measure as shown in REF _Ref261522586 , and an assumed RAC size of 10,000 Btuh. Although this is a fully deemed approach, any of these values can and should be evaluated and used to improve the savings estimates for this measure in subsequent TRM revisions.Retirement-Only All EDC programs are currently operated under this scenario. For this approach, impacts are based only on the existing unit, and savings apply only for the remaining useful life (RUL) of the unit.kWhElectricity Impact (kWh) = EFLHRAC * (CAPY/1000) * (1/EERRetRAC)kWpeakDemand Impact (kW) = (CAPY/1000) * (1/EERRetRAC) * CFRACReplacement and Recycling It is not apparent that any EDCs are currently implementing the program in this manner, but the algorithms are included here for completeness. For this approach, the Energy StarENERGY STAR upgrade measure would have to be combined with recycling via a turn-in event at a retail appliance store, where the old RAC is turned in at the same time that a new one is purchased. Unlike the retirement-only measure, the savings here are attributed to the customer that owns the retired RAC, and are based on the old unit and original unit being of the same size and configuration. In this case, two savings calculations would be needed. One would be applied over the remaining life of the recycled unit, and another would be used for the rest of the effective useful life, as explained below.For the remaining useful life (RUL) of the existing RAC: The baseline value is the EER of the retired unit.kWhElectricity Impact (kWh) = EFLHRAC * (CAPY/1000) * (1/EERRetRAC – 1/EERES)kWpeakDemand Impact (kW) = (CAPY/1000) * (1/EERRetRAC – 1/EERES) * CFRACAfter the RUL for (EUL-RUL) years: The baseline EER would revert to the minimum Federal appliance standard EER.kWhElectricity Impact (kWh) = EFLHRAC * (CAPY/1000) * (1/EERb – 1/EERES)kWpeakDemand Impact (kW) = (CAPY/1000) * (1/EERb – 1/EERES) * CFRACWhere:Definition of TermsEFLHRAC = The Equivalent Full Load Hours of operation for the installed measure. In actuality, the number of hours and time of operation can vary drastically depending on the RAC location (living room, bedroom, home office, etc.).Correction of ES RAC EFLH Values:An additional step is required to determine EFLHRAC values. Normally, the EFLH values from the Energy StarENERGY STAR Room AC Calculator would be used directly. However, the current (July 2010) ES Room AC calculator EFLHs are too high because they are the same as those used for the Central AC calculator, whereas RAC full load hours should be much lower than for a CAC system. As such, the ES EFLH values were corrected as follows:EFLHRAC = EFLHES-RAC * AF Where:EFLH ES-RAC = Full load hours from the Energy StarENERGY STAR Room AC CalculatorAF = Adjustment factor for correcting current ES Room AC calculator EFLHs.Note that when the Energy StarENERGY STAR RAC calculator values are eventually corrected in the ES calculator, the corrected EFLHES-RAC values can be used directly and this adjustment step can be ignored and/or deleted.CAPY = Rated cooling capacity (size) of the RAC in Btuh.EERRetRAC= The Energy Efficiency Ratio of the unit being retired-recycled expressed as kBtuh/kW.EERb = The Energy Efficiency Ratio of a RAC that just meets the minimum federal appliance standard efficiency expressed as kBtuh/kW.EERES = The Energy Efficiency Ratio for an Energy StarENERGY STAR RAC expressed as kBtuh/kW.CFRAC = Demand Coincidence Factor which is 0.58 from the 2010 PA TRM for the “ENERGY STAR Room Air Conditioner” measure.1000 = Conversion factor, convert capacity from Btuh to kBtuh (1000 Btuh/kBtuh)Savings Assumptions & ReferencesTable STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 18 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 18 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 18 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 18: Room AC Retirement - ReferencesComponentTypeValueSourcesEFLHRACVaries REF _Ref261522586 \* MERGEFORMAT , “Corrected Hours”----EFLHES-RACVaries REF _Ref261522586 \* MERGEFORMAT , “Original Hours”1AFFixed0.312CAPY (RAC capacity, Btuh)Fixed10,0003EERRetRACFixed9.074EERb (for a 10,000 Btuh unit)Fixed9.85EERES (for a 10,000 Btuh unit)Fixed10.85CFRACFixed0.586RAC Time Period Allocation FactorsFixed65.1%, 34.9%, 0.0%, 0.0%6Measure Life (EUL)Fixed4See source notesTable STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 19 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 19 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 19 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 19: RAC Retirement-Only EFLH and Energy Savings by CityCityOriginalHours (EFLHES-RAC)CorrectedHours (EFLHRAC)EnergyImpact (kWh)Demand Impact (kW)Allentown7842432680.6395Erie (Lowest EFLH)482149164Harrisburg929288318Philadelphia (Highest EFLH)1032320353Pittsburgh737228251Scranton621193213Williamsport659204225NOTE: REF _Ref275542461 \h Table 219Table 219 should be used with a master “mapping table” that maps the zip codes for all PA cities to one of the representative cities above. This mapping table would also be used for the TRM Energy StarENERGY STAR Room Air Conditioning measure.Sources:Full load hours for Pennsylvania cities from the Energy StarENERGY STAR Room AC Calculator spreadsheet, Assumptions tab. Note that the EFLH values currently used in the ES Room AC calculator are incorrect and too high because they are the same as those used for the Central AC calculator, but should be much less.For reference, EIA-RECS for the Northeast, Middle Atlantic region shows the per-household energy use for an RAC = 577 kWh and an average of 2.04 units per home, so the adjusted RAC use = 283 kWh per unit. This more closely aligns with the energy consumption for room AC using the adjusted EFLH values than without adjustment.Mid Atlantic TRM Version 1.0. April 28, 2010 Draft. Prepared by Vermont Energy Investment Corporation. An adjustment to the ES RAC EFLHs of 31% was used for the “Window A/C” measure.10,000 Btuh is the typical size assumption for the Energy StarENERGY STAR Room AC Savings calculator. It is also used as the basis for PA TRM Energy StarENERGY STAR Room AC measure savings calculations, even though not explicitly stated in the TRM. For example:Energy savings for Allentown = 74 kWh and EFLH = 784 hrs:784 * (10,000/1000) * (1/9.8 – 1/10.8) = 74 kWh.CPUC 2006-2008 EM&V, “Residential Retrofit High Impact Measure Evaluation Report”, prepared for the CPUC Energy Division, February 8, 2010, page 165, Table 147 show average sizes of 9,729 and 10,091 Btuh.Massachusetts TRM, Version 1.0, October 23, 2009, “Room AC Retirement” measure, Page 52-54. Assumes an existing/recycled unit EER=9.07, reference is to weighted 1999 AHAM shipment data. This value should be evaluated and based on the actual distribution of recycled units in PA and revised in later TRMs if necessary. Other references include:Energy StarENERGY STAR website materials on Turn-In programs, if reverse-engineered indicate an EER=9.16 is used for savings calculations for a 10 year old RAC. Another statement indicates that units that are at least 10 years old use 20% more energy than a new ES unit which equates to: 10.8 EER/1.2 = 9?EER HYPERLINK ""“Out With the Old, in With the New: Why Refrigerator and Room Air Conditioner Programs Should Target Replacement to Maximize Energy Savings.” National Resources Defense Council, November 2001. Page 3, Cites a 7.5?EER as typical for a room air conditioner in use in 1990s. However, page 21 indicates an 8.0 EER was typical for a NYSERDA program.Energy StarENERGY STAR and Federal Appliance Standard minimum EERs for a 10,000 Btuh unit with louvered sides.HYPERLINK "" TRM June 2010, coincident demand factor and Time Period Allocation Factors for Energy StarENERGY STAR Room AC.Expected Life of SavingsThis value would be added to the TRM Appendix A:Room Air Conditioner Retirement = 4 yearsFrom the PA TRM, the EUL for an Energy StarENERGY STAR Room Air Conditioner is 10 years, but the TRM does not provide an RUL for RACs. However, as shown in REF _Ref267483746 \* MERGEFORMAT Table 220Table 220, the results from a recent evaluation of ComEd’s appliance recycling program found a median age of 21 to 25 years for recycled ACs. For a unit this old, the expected life of the savings is likely to be short, so 4 years was chosen as a reasonable assumption based on these references:DEER database, presents several values for EUL/RUL for room AC recycling: HYPERLINK "" 0607 recommendation: EUL=9, RUL=1/3 of EUL = 3 years. The 1/3 was defined as a “reasonable estimate”, but no basis given.2005 DEER: EUL=15, did not have recycling RULAppliance Magazine and EnergyStar calculator: EUL=9 yearsCA IOUs: EUL=15, RUL=5 to 7“Out With the Old, in With the New: Why Refrigerator and Room Air Conditioner Programs Should Target Replacement to Maximize Energy Savings,” National Resources Defense Council, November 2001, page 21, 5 years stated as a credible estimate.From the PA TRM June 2010, if the ratio of refrigerator recycling measure life to Energy StarENERGY STAR measure life is applied: (8/13) * 10 years (for RAC) = 6 years for RAC recycling.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 20 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 20 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 20 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 20: Preliminary Results from ComEd RAC Recycling EvaluationAppliance TypeAge in YearsN0 to 56 to 1011 to 1516 to 2021 to 2526 to 3031 to 3536 to 40Over 40Room Air Conditioners0%5%7%18%37%18%5%6%5%—Sources:Navigant Consulting evaluation of ComEd appliance recycling program.Residential Smart Strip Plug OutletsMeasure NameResidential Smart Strip Plug OutletsTarget SectorResidential Measure UnitPer Smart StripUnit Energy Savings184 kWhUnit Peak Demand Reduction0.013 kWMeasure Life5 yearsMeasure DescriptionSmart Strips are power strips that contain a number of controlled sockets with at least one uncontrolled socket. When the appliance that is plugged into the uncontrolled socket is turned off, the power strips then shuts off the items plugged into the controlled sockets. Qualified power strip must automatically turn off when equipment is unused / unoccupied.Measure ApplicabilityEligibilityThis protocolwork paper documents the energy savings attributed to the installation of smart strip plugs. The most likely area of application is within residential spaces, i.e. single family and multifamily homes. The two areas of usage considered are home computer systems and home entertainment systems. It is expected that approximately four items will be plugged into each power strip. Savings CalculationsAlgorithmsThe DSMore Michigan Database of Energy Efficiency Measures performed engineering calculations using standard standby equipment wattages for typical computer and TV systems and idle times. The energy savings and demand reduction were obtained through the following calculations:kkWhWh Savings = (kWcomp×Hrcomp)+(kWTV×HrTv)2×365 =184 kWhkWkW Demand Reductionpeak = CF×(kWcomp+kWTV)2 =0.013 kWDefinition of VariablesTermsThe parameters in the above equation are listed in REF _Ref274917712 \h Table 221.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 21 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 21 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 21 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 21: Calculation AssumptionsParameterComponentTypeValueSource (Endnote)kWcompIdle kW of computer systemFixed0.0201i1HrcompDaily hours of computer idle timeFixed20i1kWTVIdle kW of TV systemFixed0.0320i1HrTVDaily hours of TV idle timeFixed191iCFCoincidence FactorFixed0.501iSources:Please find original documentation from DSMore MI DB attached here in: Deemed SavingskWh = 184 kWhkWpeak= 0.013 kWThe deemed savings for the installation of smart strip plug outlets is 184 kWh per year with a demand reduction of 0.013 kW.Measure LifeTo ensure consistency with the annual savings calculation procedure used in the DSMore MI database, the measure of 5 years is taken from DSMore.Evaluation ProtocolsThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings.Residential Solar Water HeatersMeasure NameResidential Solar Water HeatersTarget SectorResidential EstablishmentsMeasure UnitWater HeaterUnit Energy Savings2,106 kWhUnit Peak Demand Reduction 0.378 kWMeasure Life14 yearsIntroductionSolar water heaters utilize solar energy to heat water, which reduces electricity required to heat water. Measure ApplicabilityEligibilityThis protocolwork paper documents the energy savings attributed to solar water in PA. The target sector primarily consists of single-family residences.Savings CalculationsAlgorithmsThe energy savings calculation utilizes average performance data for available residential solar and standard water heaters and typical water usage for residential homes. The energy savings are obtained through the following formula:Energy Savings kWh = 1EFBase-1EFProposed×HW×365×8.3lbgal×Thot-Tcold3413BtukWhThe energy factor used in the above equation represents an average energy factor of market available solar water heaters. The demand reduction is taken as the annual energy usage of the baseline water heater multiplied by the ratio of the average energy usage during noon and 8PM on summer weekdays to the total annual energy usage. Note that this is a different formulation than the demand savings calculations for other water heaters. This modification of the formula reflects the fact that a solar water heater’s capacity is subject to seasonal variation, and that during the peak summer season (top 100 hours), the water heater is expected to fully supply all domestic hot water needs.kWpeakDemand Savings= EnergyToDemandFactor×BaseEnergy UsageThe Energy to Demand Factor is defined below:EnergyToDemandFactor = Average UsageSummer WD Noon-8Annual Energy UsageThe ratio of the average energy usage during noon and 8 PM on summer weekdays to the total annual energy usage is taken from load shape data collected for a water heater and HVAC demand response study for PJM. The factor is constructed as follows:Obtain the average kW, as monitored for 82 water heaters in PJM territory, for each hour of the typical day summer, winter, and spring/fall days. Weight the results (91 summer days, 91 winter days, 183 spring/fall days) to obtain annual energy usage.Obtain the average kW during noon to 8 PM on summer days from the same data. Noon to 8 PM is used because most of the top 100 hours (over 80%) occur during noon and 8 PM. The average noon to 8 PM demand is converted to average weekday noon to 8 PM demand through comparison of weekday and weekend monitored loads from the same PJM study. The ratio of the average weekday noon to 8 PM energy demand to the annual energy usage obtained in step 1. The resulting number, 0.00009172, is the EnergyToDemandFactor.The load shapes (fractions of annual energy usage that occur within each hour) during summer week days are plotted for three business types in REF _Ref275542462 \h Figure 26 below.Figure STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 6 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 6 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 4: Load shapes for hot water in residential buildings taken from a PJM study.Definition of VariablesTermsThe parameters in the above equation are listed in REF _Ref274917774 \h Table 222.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 22 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 22 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 22 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 22: Calculation AssumptionsComponentTypeValuesSource EFbase , Energy Factor of baseline electric heaterFixed0.96EFproposed, Year-round average Energy Factor of proposed solar water heaterFixed1.841HW , Hot water used per day in gallonsFixed64.3 gallon/day7Thot , Temperature of hot waterFixed120 F8Tcold , Temperature of cold water supplyFixed55 F9Baseline Energy Usage (kWh)Calculated 4,122EnergyToDemandFactor: Ratio of average Noon to 8 PM usage during summer peak to annual energy usageFixed0.000091722-5Source:We have taken the average energy factor for all solar water heaters with collector areas of 50 ft2 or smaller from . As a cross check, we have calculated that the total available solar energy in PA for the same set of solar collectors is about twice as much as the savings claimed herein – that is, there is sufficient solar capacity to actualize an average energy factor of 1.84. Deemed Savings Estimates for Legacy Air Conditioning and Water Heating Direct Load Control Programs in PJM Region. The report can be accessed online: , The average is over all 82 water heaters and over all summer, spring/fall, or winter days. The load shapes are taken from the fourth columns, labeled “Mean”, in tables 14,15, and 16 in pages 5-31 and 5-32 On the other hand, the band would have to expanded to at least 12 hours to capture all 100 hours.The 5th column, labeled “Mean” of Table 18 in page 5-34 is used to derive an adjustment factor that scales average summer usage to summer weekday usage. The conversion factor is 0.925844. A number smaller than one indicates that for residential homes, the hot water usage from noon to 8 PM is slightly higher is the weekends than on weekdays.Federal Standards are 0.97 -0.00132 x Rated Storage in Gallons. For a 50-gallon tank this is approximately 0.90. “Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool Heaters” US Dept of Energy Docket Number: EE–2006–BT-STD–0129, p. 30“Energy Conservation Program for Consumer Products: Test Procedure for Water Heaters”, Federal Register / Vol. 63, No. 90, p. 25996Many states have plumbing codes that limit shower and bathtub water temperature to 120 °F.Mid-Atlantic TRM, footnote #24Deemed SavingskWh = 2,106 kWhkWpeak= 0.378 kWThe deemed savings for the installation of solar water heaters with is 2,106 kWh per year. The demand reductions are 0.378 kW per water heater.Measure LifeThe expected useful life is 20 years, according to Energy StarENERGY STAR.Evaluation ProtocolsThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings.Water Heater Pipe InsulationMeasure NameResidential Water Heater Pipe InsulationTarget SectorResidential EstablishmentsMeasure UnitWater HeaterUnit Energy Savings124 kWhUnit Peak Demand Reduction 0.011 kWMeasure Life13 yearsIntroductionThis measure relates to the installation of foam insulation on 10 feet of exposed pipe in unconditioned space, ?” thick. The baseline for this measure is a standard efficiency electric water heater (EF=0.90) with an annual energy usage of 4,122 kWh.Measure ApplicabilityEligibilityThis protocol documents the energy savings for an electric water heater attributable to insulating 10 feet of exposed pipe in unconditioned space, ?” thick. The target sector primarily consists of residential residences.Savings CalculationsAlgorithmsThe annual energy savings are assumed to be 3% of the annual energy use of an electric water heater (4,122 kWh), or 124 kWh. This estimate is based on a recent report prepared by the ACEEE for the State of Pennsylvania.ΔkWh= 124 kWhThe summer coincident peak kW savings are calculated as follows:ΔkWpeak = ΔkWh * CFEnergyToDemandFactorDefinition of TermsWhere:ΔkWh = Annual kWh savings = 124kWh per fixture installedEnergyToDemandCFFactor = Summer peak coincidence factor for measure = 0.00009172ΔkWpeak =Summer peak kW savings =0.011 kW.The demand reduction is taken as the annual energy savings multiplied by the ratio of the average energy usage during noon and 8PM on summer weekdays to the total annual energy usage. The Energy to Demand Factor, or Coincidence Factor, is defined as:EnergyToDemandFactor = Average UsageSummer WD Noon-8Annual Energy UsageThe ratio of the average energy usage during noon and 8 PM on summer weekdays to the total annual energy usage is taken from load shape data collected for a water heater and HVAC demand response study for PJM. The factor is constructed as follows:Obtain the average kW, as monitored for 82 water heaters in PJM territory, for each hour of the typical day summer, winter, and spring/fall days. Weight the results (91 summer days, 91 winter days, 183 spring/fall days) to obtain annual energy usage.Obtain the average kW during noon to 8 PM on summer days from the same data. The average noon to 8 PM demand is converted to average weekday noon to 8 PM demand through comparison of weekday and weekend monitored loads from the same PJM study, The ratio of the average weekday noon to 8 PM energy demand to the annual energy usage obtained in step 1. The resulting number, 0.00009172, is the Energy to Demand Factor, or Coincidence Factor.The load shapes (fractions of annual energy usage that occur within each hour) during summer week days are plotted in REF _Ref275542463 \h Figure 27 below.Figure STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 7 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 7 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 5: Load shapes for hot water in residential buildings taken from a PJM study.Measure LifeAccording to the Efficiency Vermont Technical Reference User Manual (TRM), the expected measure life is 13 years.Evaluation ProtocolsThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings.Residential Whole House FansThis measure applies to the installation of a whole house fan. The use of a whole house fan will offset existing central air conditioning loads. Whole house fans operate when the outside temperature is less than the inside temperature, and serve to cool the house by drawing cool air in through open windows and expelling warmer air through attic vents. The baseline is taken to be an existing home with central air conditioning (CAC) and without a whole house fan.The retrofit condition for this measure is the installation of a new whole house fan. AlgorithmsThe energy savings for this measure result from reduced air conditioning operation. While running, whole house fans can consume up to 90% less power than typical residential central air conditioning units. Energy savings for this measure are based on whole house fan energy savings values reported by the energy modeling software, REM/Rate. Model AssumptionsThe savings are reported on a “per house” basis with a modeled baseline cooling provided by a SEER 10 Split A/C unit.Savings derived from a comparison between a naturally ventilated home and a home with a whole-house fan.2181 square-foot single-family detached home built over unconditioned basement.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 23: Deemed Energy Savings by PA CityCityAnnual Energy Savings (kWh/house)Allentown204Erie200Harrisburg232Philadelphia229Pittsburgh199Scranton187Williamsport191This measure assumes no demand savings as whole house fans are generally only used during milder weather (spring/fall and overnight). Peak 100 hours typically occur during very warm periods when a whole house fan is not likely being used.Measure LifeMeasure life = 20 years (15 year maximum for PA TRM)Residential Ductless Mini-Split Heat PumpsMeasure NameResidential Ductless Heat PumpsTarget SectorResidential EstablishmentsMeasure UnitDuctless Heat PumpsUnit Energy SavingsUnit Peak Demand ReductionMeasure Life15 IntroductionENERGY STAR ductless “mini-split” heat pumps utilize high efficiency SEER/EER and HSPF energy performance factors of 14.5/12 and 8.2, respectively, or above. This technology typically converts an electric resistance home into an efficient single or multi-zonal ductless heat pump system. Homeowners have choice to install an ENERGY STAR qualified model or a standard efficiency model. Measure ApplicabilityEligibilityThis protocolwork paper documents the energy savings attributed to ductless mini-split heat pumps with energy efficiency performance of 14.5/12 SEER/EER and 8.2 HSPF or greater with inverter technology. The baseline heating system could be an existing electric resistance heating, a lower-efficiency ductless heat pump system, a ducted heat pump, or electric furnace. Fuel conversion from a gas heated system is not applicationable. In addition, this could be installed in a new construction or addition. These systems could be installed as the primary heating system for the house or as a secondary heating system for a single room.AlgorithmsThe savings depend on three main factors: baseline condition, usage (primary or secondary heating system), and the capacity of the indoor unit. The algorithm is separated into two calculations: single zone and multi-zone ductless heat pumps. The savings algorithm is as follows:Single Zone:kWh= kWhcool + kWhheatkWhheatHeating energy impact (kWh) = CAPY/1000 X (1/HSPFb - 1/HSPFe ) X EFLH X LFkWhcoolCooling energy impact (kWh) = CAPY/1000 X (1/SEERb – 1/SEERe ) X EFLH X LFNote, that if the customer did not have a cooling system installed prior, there may be a negative cooling energy impact.kWpeakPeak Demand Impact (kW) = CAPY/1000 X (1/EERb – 1/EERe ) X CF Multi-ZonekWh= kWhcool + kWhheatkWhheatHeating energy impact (kWh) = [CAPY/1000 X (1/HSPFb - 1/HSPFe ) X EFLH X LF]ZONE1 + [CAPY/1000 X (1/HSPFb - 1/HSPFe ) X EFLH X LF]ZONE2 + [CAPY/1000 X (1/HSPFb - 1/HSPFe ) X EFLH X LF]ZONEnkWhcoolCooling energy impact (kWh) = [CAPY/1000 X (1/SEERb – 1/SEERe ) X EFLH X LF]ZONE1 + [CAPY/1000 X (1/SEERb – 1/SEERe ) X EFLH X LF]ZONE2 + [CAPY/1000 X (1/SEERb – 1/SEERe ) X EFLH X LF]ZONEnNote, that if the customer did not have a cooling system installed prior, there may be a negative cooling energy impact.kWpeakPeak Demand Impact (kW)= [CAPY/1000 X (1/EERb – 1/EERe ) X CF]ZONE1 + [CAPY/1000 X (1/EERb – 1/EERe ) X CF]ZONE2 + [CAPY/1000 X (1/EERb – 1/EERe ) X CF]ZONEnWhere:Definition of TermsCAPY = The capacity of the indoor unit is given in BTUH EFLH = Equivalent Full Load Hours – If the unit is installed as the primary heating system; that is, in a living room or large room of the house, the EFLH will be equivalent to those for a central heating system. If the unit is installed as a secondary heating system, the EFLH will be equivalent to a room unit (ie. for cooling, equivalent to a room AC system).HSPFb = Heating efficiency of baseline unitHSPBe = Efficiency of the installed DHPSEERb = Cooling efficiency of baseline unitSEERe = Efficiency of the installed DHPEERb= The Energy Efficiency Ratio of the baseline unitEERe = The Energy Efficiency Ratio of the efficient unitLF = Load factorTable STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 24 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 23 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 23 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 23: DHP – Values and ReferencesComponentTypeValuesSourcesCAPYVariableAEPS Application; EDC Data GatheringEFLH primary FixedAllentown Cooling = 784 HoursAllentown Heating = 2,492 HoursErie Cooling = 482 HoursErie Heating = 2,901 HoursHarrisburg Cooling = 929 HoursHarrisburg Heating = 2,371 HoursPhiladelphia Cooling = 1,032 HoursPhiladelphia Heating = 2,328 HoursPittsburgh Cooling = 737 HoursPittsburgh Heating = 2,380 HoursScranton Cooling = 621 HoursScranton Heating = 2,532 HoursWilliamsport Cooling = 659 HoursWilliamsport Heating = 2,502 Hours1EFLH secondaryFixedAllentown Cooling = 243 HoursAllentown Heating = 774 HoursErie Cooling = 149 HoursErie Heating = 897 HoursHarrisburg Cooling = 288 HoursHarrisburg Heating = 735 HoursPhiladelphia Cooling = 320 HoursPhiladelphia Heating = 722 HoursPittsburgh Cooling = 228 HoursPittsburgh Heating = 736 HoursScranton Cooling = 193 HoursScranton Heating = 787 HoursWilliamsport Cooling = 204 HoursWilliamsport Heating = 775 hours2, 3HSPFbFixedStandard DHP: 7.7Electric resistance: 3.413ASHP: 7.7Electric furnace: 3.242 4, 6SEERbFixedDHP or central AC: 13Room AC: 11No Cooling: remove 1/SEERb5, 6, 7HSPFeVariableBased on nameplate information. Should be at least ENERGY STAR. AEPS Application; EDC Data GatheringSEEReVariableBased on nameplate information. Should be at least ENERGY STAR. AEPS Application; EDC Data GatheringCFFixed70%8EERbFixed= (11.3/13) X SEERb for DHP or central AC= 9.8 room AC5,9EEReFixed= (11.3/13) X SEERe9LFFixed25%10Sources:US Department of Energy, Energy StarENERGY STAR Calculator. Accessed 3/16/2009. From Pennsylvania’s Technical Reference Manual.Secondary cooling load hours based on room air conditioner “corrected” EFLH workpaper that adjusted the central cooling hours to room cooling hours by “Approved Interim PA TRM Protocol for Room AC Recycling”, August 2010.Secondary heating load hours based ratio of central cooling hours to room cooling hours multiplied by the central heating hours. The ratio of time spent heating or cooling in a secondary room versus the whole house is assumed to be the same. COP = 3.413 HSPF for electric resistance heating. Electric furnace efficiency typically varies from 0.95 to 1.00 and thereby assumed a COP 0.95 = 3.242. Federal Register, Vol. 66, No. 14, Monday, January 22, 2001/Rules and Regulations, p. 7170-7200. Air-Conditioning, Heating, and Refrigeration Institute (AHRI); the directory of the available ductless mini-split heat pumps and corresponding efficiencies (lowest efficiency currently available). Accessed 8/16/2010.SEER based on average EER of 9.8 for room AC unit. From Pennsylvania’s Technical Reference Manual.Based on an analysis of six different utilities by Proctor Engineering. From Pennsylvania’s Technical Reference Manual.Average EER for SEER 13 unit. From Pennsylvania’s Technical Reference Manual.Personal communication with Bruce Manclark, Delta-T, Inc. who is working with Northwest Energy Efficiency Alliance (NEEA) on the Northwest DHP Project of Heating ZoneDefinition of primary and secondary heating systems depends primarily on the location where the source heat is provided in the household, and shown in REF _Ref274917883 \h Table 225Table 224.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 25 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 24 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 24 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 24: Heating ZonesComponentDefinitionPrimary Heating ZoneLiving roomDining room House hallwayKitchen areasSecondary Heating ZoneBedroom Bathroom Basement/Recreation Room Storage RoomOffice/Study Add-on roomMeasure LifeAccording to an October 2008 report for the CA Database for Energy Efficiency Resources, a heat pump’s lifespan is 15 years.Evaluation ProtocolsThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings. A sample of pre and post metering is recommended to verify heating and cooling savings.Residential Fuel Switching: DHW Electric to GasMeasure NameResidential Fuel Switching: DHW Electric to GasTarget SectorResidentialMeasure UnitWater HeaterUnit Energy Savings4104 kWhUnit Peak Demand Reduction0.376 kWGas Consumption Increase21.32 MMBtuMeasure Life13 yearsIntroductionNatural gas water heaters generally offer the customer lower costs compared to standard electric water heaters. Additionally, they typically see an overall energy savings when looking at the source energy of the electric unit versus the gas unit. Standard electric water heaters have energy factors of 0.904 and a federal standard efficiency gas water heater has an energy factor of 0.594 for a 40gal unit.Measure ApplicabilityEligibilityThis protocolwork paper documents the energy savings attributed to converting from a standard electric water heater with Energy Factor of 0.904 or greater to a standard natural gas water heater with Energy Factor of 0.594 or greater. The target sector primarily consists of single-family residences.Savings CalculationsAlgorithmsThe energy savings calculation utilizes average performance data for available residential standard electric and natural gas water heaters and typical water usage for residential homes. Because there is little electric energy associated with a natural gas water heater, the energy savings are the full energy utilization of the electric water heater. The energy savings are obtained through the following formula:kWhEnergy Savings = 1EFElec,bl×HW×365×8.3lbgal×Thot-Tcold3413BtukWhAlthough there is a significant electric savings, there is an associated increase in natural gas energy consumption. While this gas consumption does not count against PA Act 129 energy savings, it is expected to be used in the program TRC test. The increased natural gas energy is obtained through the following formula:Gas Consumption (MMBtu) = 1EFNG,inst×HW×365×8.3lbgal×Thot-Tcold1,000,000BtuMMBtuDemand savings result from the removal of the connected load of the electric water heater. The demand reduction is taken as the annual energy savings multiplied by the ratio of the average energy usage during noon and 8PM on summer weekdays to the total annual energy usage.kWpeakDemand Savings= EnergyToDemandFactor × Energy SavingsThe Energy to Demand Factor is defined below:EnergyToDemandFactor = Average UsageSummer WD Noon-8Annual Energy UsageThe ratio of the average energy usage during noon and 8 PM on summer weekdays to the total annual energy usage is taken from load shape data collected for a water heater and HVAC demand response study for PJM. The factor is constructed as follows:Obtain the average kW, as monitored for 82 water heaters in PJM territory, for each hour of the typical day summer, winter, and spring/fall days. Weight the results (91 summer days, 91 winter days, 183 spring/fall days) to obtain annual energy usage.Obtain the average kW during noon to 8 PM on summer days from the same data. The average noon to 8 PM demand is converted to average weekday noon to 8 PM demand through comparison of weekday and weekend monitored loads from the same PJM study.The ratio of the average weekday noon to 8 PM energy demand to the annual energy usage obtained in step 1. The resulting number, 0.00009172, is the EnergyToDemandFactor.The load shapes (fractions of annual energy usage that occur within each hour) during summer week days are plotted in REF _Ref275542464 \h Figure 28Figure 28 below.Figure STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 8 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 8: Load shapes for hot water in residential buildings taken from a PJM.Definition of VariablesThe parameters in the above equation are listed in REF _Ref275509591 \h \* MERGEFORMAT Table 226Table 225 below.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 26 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 25: Calculation AssumptionsComponentTypeValuesSourceEFelect,bl, Energy Factor of baseline water heaterFixed0.9044EFNG,inst, Energy Factor of installed natural gas water heaterVariable>=.5945HW, Hot water used per day in gallonsFixed64.3 gallon/day6Thot, Temperature of hot waterFixed120 °F7Tcold, Temperature of cold water supplyFixed55 °F8EnergyToDemandFactorFixed0.000091721-3Deemed Savings Estimates for Legacy Air Conditioning and Water Heating Direct Load Control Programs in PJM Region. The report can be accessed online: average is over all 82 water heaters and over all summer, spring/fall, or winter days. The load shapes are taken from the fourth columns, labeled “Mean”, in tables 14,15, and 16 in pages 5-31 and 5-32The 5th column, labeled “Mean” of Table 18 in page 5-34 is used to derive an adjustment factor that scales average summer usage to summer weekday usage. The conversion factor is 0.925844. A number smaller than one indicates that for residential homes, the hot water usage from noon to 8 PM is slightly higher is the weekends than on weekdays.Federal Standards are 0.97 -0.00132 x Rated Storage in Gallons. For a 50-gallon tank this is 0.904. “Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool Heaters” US Dept of Energy Docket Number: EE–2006–BT-STD–0129, p. 30Federal Standards are 0.67 -0.0019 x Rated Storage in Gallons. For a 40-gallon tank this is 0.594. “Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool Heaters” US Dept of Energy Docket Number: EE–2006–BT-STD–0129, p. 30“Energy Conservation Program for Consumer Products: Test Procedure for Water Heaters”, Federal Register / Vol. 63, No. 90, p. 25996Many states have plumbing codes that limit shower and bathtub water temperature to 120 °F.Mid-Atlantic TRM, footnote #24Deemed SavingsThe deemed savings for the installation of a natural gas water heater in place of a standard electric water heater are listed in REF _Ref275542465 \h Table 227Table 226 below.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 27 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 26: Energy Savings and Demand ReductionsElectric unit Energy FactorEnergy Savings (kWh)Demand Reduction (kW)0.90441040.376The deemed gas consumption for the installation of a standard efficiency natural gas water heater in place of a standard electric water heater is listed in REF _Ref275542466 \h Table 228Table 227 below.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 28 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 27: Gas ConsumptionGas unit Energy FactorGas Consumption (MMBtu)0.59421.32Measure LifeAccording to an October 2008 report for the CA Database for Energy Efficiency Resources, a gas water heater’s lifespan is 13 years.Evaluation ProtocolsThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings.Residential Fuel Switching: DHW Heat Pump to GasMeasure NameResidential Fuel Switching: DHW Heat Pump to GasTarget SectorResidentialMeasure UnitWater HeaterUnit Energy Savings4104 kWhUnit Peak Demand Reduction0.376 kWGas Consumption Increase21.32 MMBtuMeasure Life13 yearsIntroductionNatural gas water heaters reduce electric energy and demand compared to heat pump water heaters. Standard heat pump water heaters have energy factors of 2.0 and a federal standard efficiency gas water heater has an energy factor of 0.594 for a 40gal unit.Measure ApplicabilityEligibilityThis protocolwork paper documents the energy savings attributed to converting from a standard heat pump water heater with Energy Factor of 2.0 or greater to a standard natural gas water heater with Energy Factor of 0.594 or greater. The target sector primarily consists of single-family residences.Savings CalculationsAlgorithmsThe energy savings calculation utilizes average performance data for available residential standard heat pump and natural gas water heaters and typical water usage for residential homes. Because there is little electric energy associated with a natural gas water heater, the energy savings are the full energy utilization of the heat pump water heater. The energy savings are obtained through the following formula:kWh Energy Savings = 1EFHP,bl×FDerate×HW×365×8.3lbgal×Thot-Tcold3413BtukWhAlthough there is a significant electric savings, there is an associated increase in natural gas energy consumption. While this gas consumption does not count against PA Act 129 energy savings, it is expected to be used in the program TRC test. The increased natural gas energy is obtained through the following formula:Gas Consumption (MMBtu) =1EFNG,inst×HW×365×8.3lbgal×Thot-Tcold1,000,000BtuMMBtuDemand savings result from the removal of the connected load of the heat pump water heater. The demand reduction is taken as the annual energy savings multiplied by the ratio of the average energy usage during noon and 8PM on summer weekdays to the total annual energy usage.Demand Savings =EnergyToDemandFactor ultiplThe Energy to Demand Factor is defined below:EnergyToDemandFactor =Average UsageSummer WD Noon-8Annual Energy UsageThe ratio of the average energy usage during noon and 8 PM on summer weekdays to the total annual energy usage is taken from load shape data collected for a water heater and HVAC demand response study for PJM. The factor is constructed as follows:Obtain the average kW, as monitored for 82 water heaters in PJM territory, for each hour of the typical day summer, winter, and spring/fall days. Weight the results (91 summer days, 91 winter days, 183 spring/fall days) to obtain annual energy usage.Obtain the average kW during noon to 8 PM on summer days from the same data. The average noon to 8 PM demand is converted to average weekday noon to 8 PM demand through comparison of weekday and weekend monitored loads from the same PJM study. The ratio of the average weekday noon to 8 PM energy demand to the annual energy usage obtained in step 1. The resulting number, 0.00009172, is the EnergyToDemandFactor.The load shapes (fractions of annual energy usage that occur within each hour) during summer week days are plotted in REF _Ref275542467 \h Figure 29Figure 29 below.Figure STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 9 STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 9: Load shapes for hot water in residential buildings taken from a PJM.Definition of VariablesTermsThe parameters in the above equation are listed in REF _Ref275510763 \h Table 229Table 228 below.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 29 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 28: Calculation AssumptionsComponentTypeValuesSourceEFHP,bl , Energy Factor of baseline heat pump water heaterFixed≥ 2.04EFNG,inst . Energy Factor of installed natural gas water heaterVariable≥ 0.5945HW, Hot water used per day in gallonsFixed64.3 gallon/day6Thot, Temperature of hot waterFixed120 °F7Tcold, Temperature of cold water supplyFixed55 °F8FDerate, COP De-rating factor Fixed0.849, and discussion belowEnergyToDemandFactorFixed0.000091721-3Source:Deemed Savings Estimates for Legacy Air Conditioning and Water Heating Direct Load Control Programs in PJM Region. The report can be accessed online: HYPERLINK "" average is over all 82 water heaters and over all summer, spring/fall, or winter days. The load shapes are taken from the fourth columns, labeled “Mean”, in tables 14,15, and 16 in pages 5-31 and 5-32The 5th column, labeled “Mean” of Table 18 in page 5-34 is used to derive an adjustment factor that scales average summer usage to summer weekday usage. The conversion factor is 0.925844. A number smaller than one indicates that for residential homes, the hot water usage from noon to 8 PM is slightly higher is the weekends than on weekdays.Heat pump water heater efficiencies have not been set in a Federal Standard. However, the Federal Standard for water heaters does refer to a baseline efficiency for heat pump water heaters as EF = 2.0 “Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool Heaters” US Dept of Energy Docket Number: EE–2006–BT-STD–0129.Federal Standards are 0.67 -0.0019 x Rated Storage in Gallons. For a 40-gallon tank this is 0.594. “Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool Heaters” US Dept of Energy Docket Number: EE–2006–BT-STD–0129, p. 30“Energy Conservation Program for Consumer Products: Test Procedure for Water Heaters”, Federal Register / Vol. 63, No. 90, p. 25996Many states have plumbing codes that limit shower and bathtub water temperature to 120 °F.Mid-Atlantic TRM, footnote #24Based on TMY2 weather files from for Erie, Harrisburg, Pittsburgh, Wilkes-Barre, And Williamsport, the average annual wetbulb temperature is 45 1.3 °F. The wetbulb temperature in garages or attics, where the heat pumps are likely to be installed, are likely to be two or three degrees higher, but for simplicity, 45 °F is assumed to be the annual average wetbulb temperature.Heat Pump Water Heater Energy FactorThe Energy Factors are determined from a DOE testing procedure NOTEREF _Ref265666422 \h \* MERGEFORMAT Error! Bookmark not defined. that is carried out at 56 °F wetbulb temperature. However, the average wetbulb temperature in PA is closer to 45 °F. The heat pump performance is temperature dependent. The plot in REF _Ref276630732 \h Figure 210 below shows relative coefficient of performance (COP) compared to the COP at rated conditions. According to the linear regression shown on the plot, the COP of a heat pump water heater at 45 °F is 0.84 of the COP at nominal rating conditions. As such, a de-rating factor of 0.84 is applied to the nominal Energy Factor of the Heat Pump water heaters.Figure STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 10: Dependence of COP on Outdoor Wet-Bulb TemperatureFigure STYLEREF 1 \s 2 SEQ Figure \* ARABIC \s 1 10: Dependence of COP on outdoor wetbulb temperature.Deemed SavingsThe deemed savings for the installation of a natural gas water heater in place of a standard heat pump water heater are listed in REF _Ref275542468 \h Table 230Table 229 below.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 30 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 29: Energy Savings and Demand ReductionsHeat Pump unit Energy FactorEnergy Savings (kWh)Demand Reduction (kW)2.022080.203The deemed gas consumption for the installation of a standard efficiency natural gas water heater in place of a standard heat pump water heater is listed in REF _Ref275542469 \h Table 231Table 230 below.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 31 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 30: Gas ConsumptionGas unit Energy FactorGas Consumption (MMBtu)0.59421.32Measure LifeAccording to an October 2008 report for the CA Database for Energy Efficiency Resources, a gas water heater’s lifespan is 13 years.Evaluation ProtocolsThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings.Deemed Savings Protocol: Residential Fuel Switching: Electric Heat to Gas Heat Measure DescriptionThis protocol documents the energy savings attributed to converting from an existing electric heating system to a new natural gas furnace in a residential home. The target sector primarily consists of single-family residences.The baseline for this measure is an existing residential home with an electric primary heating source. The heating source can be electric baseboards, electric furnace, or electric air source heat pump.The retrofit condition for this measure is the installation of a new standard efficiency natural gas furnace.AlgorithmsThe energy savings are the full energy consumption of the electric heating source minus the energy consumption of the gas furnace blower motor. The energy savings are obtained through the following formulas:The savings values are based on the following algorithms.Heating savings with electric baseboards or electric furnace (assumes 100% efficiency):Energy Impact:ΔkWhelec heat =CAPYelec heat ×EFLHheat3412BtukWh-HPmotor×746WHP×EFLHheatηmotor×1000WkWHeating savings with electric air source heat pump:Energy Impact:ΔkWhASHP heat =CAPYASHP heat ×EFLHheatHSPFASHP×1000WkW-HPmotor×746WHP×EFLHheatηmotor×1000WkWThere are no peak demand savings as it is a heating only measure.Although there is a significant electric savings, there is also an associated increase in natural gas energy consumption. While this gas consumption does not count against PA Act 129 energy savings, it is expected to be used in the program TRC test. The increased natural gas energy is obtained through the following formulas:Gas consumption with natural gas furnace:Gas Consumption (MMBtu) =CAPYGas heat×EFLHheatAFUEGas heat×1,000,000BtuMMBtuDefinition of TermsCAPYelec heat = Total heating capacity of existing electric baseboards or electric furnace (BtuH)CAPYASHP heat = Total heating capacity of existing electric ASHP (BtuH)CAPYGas heat = Total heating capacity of new natural gas furnace (BtuH)EFLHheat = Equivalent Full Load Heating hoursHSPFASHP = Heating Seasonal Performance Factor for existing heat pump (Btu/W?hr)AFUEGas heat = Annual Fuel Utilization Efficiency for the new gas furnace (%)HPmotor = Gas furnace blower motor horsepower (hp)ηmotor = Efficiency of furnace blower motorThe default values for each term are shown in REF _Ref275542454 \h Table 232Table 231.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 32 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 31: Default values for algorithm termsTermTypeValueSourceCAPYelec heatVariableNameplateEDC Data GatheringCAPYASHP heatVariableNameplateEDC Data GatheringCAPYGas heatVariableNameplateEDC Data GatheringEFLHheatFixedAllentown = 2492Erie = 2901Harrisburg = 2371Philadelphia = 2328Pittsburgh = 2380Scranton = 2532Williamsport = 25022010 PA TRM Table 2-1HSPFASHPVariableDefault = 7.72010 PA TRM Table 2-1NameplateEDC Data GatheringAFUEGas heatVariableDefault = 78%IECC 2009 minimum efficiencyNameplateEDC Data GatheringHPmotorVariableDefault = ? hpAverage blower motor capacity for gas furnace (typical range = ? hp to ? hp)NameplateEDC Data GatheringηmotorVariableDefault = 0.50Typical efficiency of ? hp blower motorNameplateEDC Data GatheringMeasure LifeMeasure life = 20 yearsDeemed Savings Protocol: Residential Ceiling / Attic and Wall Insulation Measure DescriptionThis measure applies to installation/retrofit of new or additional insulation in a ceiling/attic, or walls of existing residential homes with a primary electric heating and/or cooling source. The installation must achieve a finished ceiling/attic insulation rating of R-38 or higher, and/or must add wall insulation of at least an R-6 or greater rating.The baseline for this measure is an existing residential home with a ceiling/attic insulation R-value less than or equal to R-30, and wall insulation R-value less than or equal to R-11, with an electric primary heating source and/or cooling source.AlgorithmsThe savings values are based on the following algorithms.Cooling savings with central A/C:Energy Impact:ΔkWhCAC =CDD×24hrday×DUASEERCAC×1000WkW×Aroof 1Rroof,bl-1Rroof,ee+Awall1Rwall,bl-1Rwall,eePeak Demand Impact:?kWpeak-CAC = ?kWhCACEFLHcool×CFCACCooling savings with room A/C:Energy Impact:ΔkWhRAC =CDD×24hrday×DUA×FRoom ACEERRAC×1000WkW×Aroof 1Rroof,bl-1Rroof,ee+Awall1Rwall,bl-1Rwall,eePeak Demand Impact:?kWpeak-RAC = ?kWhRACEFLHcool RAC×CFRACCooling savings with electric air-to-air heat pump:Energy Impact:ΔkWhASHP cool =CDD×24hrday×DUASEERASHP×1000WkW×Aroof 1Rroof,bl-1Rroof,ee+Awall1Rwall,bl-1Rwall,eePeak Demand Impact:ΔkWpeak-ASHP cool = ΔkWhASHP coolEFLHcool×CFASHPHeating savings with electric air-to-air heat pump:Energy Impact:ΔkWhASHP heat =HDD×24hrdayHSPFASHP×1000WkW×Aroof 1Rroof,bl-1Rroof,ee+Awall1Rwall,bl-1Rwall,eePeak Demand Impact:ΔkWpeak-ASHP heat = 0Heating savings with electric baseboard or electric furnace heat (assumes 100% efficiency):Energy Impact:ΔkWhelec heat =HDD×24hrday3412BtukWh×Aroof 1Rroof,bl-1Rroof,ee+Awall1Rwall,bl-1Rwall,eePeak Demand Impact:?kWpeak-elec heat = 0Definition of TermsCDD = Cooling Degree Days (Degrees F * Days)HDD = Heating Degree Days (Degrees F * Days) DUA = Discretionary Use Adjustment to account for the fact that people do not always operate their air conditioning system when the outside temperature is greater than 65F.Aroof = Area of the ceiling/attic with upgraded insulation (ft2)Awall = Area of the wall with upgraded insulation (ft2)Rroof,bl= Assembly R-value of ceiling/attic before retrofit (ft2*°F*hr/Btu)Rroof,ee= Assembly R-value of ceiling/attic after retrofit (ft2*°F*hr/Btu)Rwall,bl= Assembly R-value of wall before retrofit (ft2*°F*hr/Btu)Rwall,ee = Assembly R-value of wall after retrofit (ft2*°F*hr/Btu)SEERCAC = Seasonal Energy Efficiency Ratio of existing home central air conditioner (Btu/W?hr)EERRAC = Average Energy Efficiency Ratio of existing room air conditioner (Btu/W?hr)SEERASHP = Seasonal Energy Efficiency Ratio of existing home air source heat pump (Btu/W?hr)HSPFASHP= Heating Seasonal Performance Factor for existing home heat pump (Btu/W?hr)CFCAC = Summer peak coincidence factor for central AC systemsCFRAC = Summer peak coincidence factor for Room AC systemsCFASHP = Summer peak coincidence factor for ASHP systemsEFLHcool = Equivalent Full Load Cooling hours for Central AC and ASHPEFLHcool RAC = Equivalent Full Load Cooling hours for Room ACFRoom AC = Adjustment factor to relate insulated area to area served by Room AC unitsThe default values for each term are shown in REF _Ref275549490 \h Table 233Table 232. The default values for heating and cooling days and hours are given in REF _Ref275549491 \h Table 234Table 233.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 33 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 32: Default values for algorithm termsTermTypeValueSourceAroofVariableVariesEDC Data GatheringAwallVariableVariesEDC Data GatheringDUAFixed0.75OH TRMRroof,blVariable5Un-insulated attic164.5” (R-13) of existing attic insulation226” (R-19) of existing attic insulation3010” (R-30) of existing attic insulationRroof,eeVariable38Retrofit to R-38 total attic insulation49Retrofit to R-49 total attic insulationRwall,blVariableDefault = 3.0Assumes existing, un-insulated wall with 2x4 studs @ 16” o.c., w/ wood/vinyl sidingExisting Assembly R-valueEDC Data GatheringRwall,eeVariableDefault = 9.0Assumes adding R-6 per DOE recommendations Retrofit Assembly R-valueEDC Data GatheringSEERCACVariableDefault = 132010 PA TRM Table 2-1NameplateEDC Data GatheringEERRACVariableDefault = 9.8DOE Federal Test Procedure 10 CFR 430, Appendix F (Used in ES Calculator for baseline)NameplateEDC Data GatheringSEERASHPVariableDefault = 132010 PA TRM Table 2-1NameplateEDC Data GatheringHSPFASHPVariableDefault = 7.72010 PA TRM Table 2-1NameplateEDC Data GatheringCFCACFixed0.702010 PA TRM Table 2-1CFRACFixed0.582010 PA TRM Table 4-1CFASHPFixed0.702010 PA TRM Table 2-1FRoom,ACFixed0.38CalculatedTable STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 34 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 33: EFLH, CDD and HDD by CityCityEFLHcool(Hours)EFLHcool RAC(Hours)CDD (Base 65)HDD (Base 65)Allentown7842437875830Erie4821496206243Harrisburg9292889555201Philadelphia103232012354759Pittsburgh7372287265829Scranton6211936116234Williamsport6592047096063Measure LifeMeasure life = 25 years.Refrigerator / Freezer Recycling and ReplacementMeasure NameResidential Refrigerator/Freezer Recycling and ReplacementTarget SectorResidential EstablishmentsMeasure UnitRefrigerator or FreezerUnit Annual Energy Savings1205kWhUnit Peak Demand Reduction0.1494kWMeasure Life7 yearsMeasure DescriptionThis measure is the recycling and replacement before end of life of an existing 10 year old or older refrigerator or freezer with a new Energy StarENERGY STAR refrigerator or freezer.This new protocol is being proposed because the June 2010 TRM only covers refrigerator/freezer Energy Star upgrades at end of life and recycling/removal but does not address this early replacement and recycling measure.The deemed savings values for this measure can be applied to refrigerator and freezer early replacements meeting the following criteria:Existing, working refrigerator or freezer 10-30 cubic feet in size (savings do not apply if unit is not working)Unit is 10 years old or older regardless of typeUnit is a primary or secondary unitReplacement unit is an Energy StarENERGY STAR refrigerator or freezerBASEBaseline Unit Energy ConsumptionEEEnergy Efficient Replacement Unit - e.g. Consumption (kWhEE)RefRplRefrigerator Replacement - e.g. Energy savings from replacement(ΔkWhRefRepl)AlgorithmsThe deemed savings values are based on the following algorithms:Energy Savings:(ΔkWhRefRepl) = kWhBASE – kWhEECoincident peak demand savings (ΔkWRefRepl) = ΔkWhRefRepl/HOURSRefRepl * CFRefReplDefinition of TermsThe energy and demand savings shall be:ΔkWhRefRepl = 1659 kWh - 454kWh = 1205 kWh/unit ΔkWRefRepl = 1205 kWh/5000 hrs * 0.62 =0.1494 kW/unitThese savings numbers are derived from the following assumptions:CFRefRepl = Summer Peak Coincidence Factor = 0.620HOURSRefRepl = Average annual run time = 5000 hrs, ,The combined average refrigerator and freezer annual kWh consumption for Pennsylvania is based upon the data contained in the PA EDC appliance recycling contractor (JACO) databases. Because the manufacturer annual kWh consumption data was recorded in less than 50% of appliance collections, it was not used to calculate an average. SWE utilized the recorded year of manufacture in the “JACO Databases” and the annual kWh consumption data by size and age contained in the Energy StarENERGY STAR Refrigerator Retirement Calculator.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 35 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 34: Average Energy Savings for Appliances Collected for Pennsylvania EDCsAverage annual kWh consumption from Pennsylvania EDC databasesNumber of complete appliance collection records provided by Pennsylvania EDCs data)Average of all Fridges and Freezers165918276Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 36 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 35: Average Energy SavingsSource/ReferenceBaseline Energy Consumption (kWhBASE)Energy StarENERGY STAR Refrigerator Energy Consumption (kWhEE)Estimated Energy Savings (ΔkWhRefRepl)Refrigerator16594541205Measure LifeRefrigerator/Freezer Replacement programs: Measure Life = 7 yrsMeasure Life Rationale The 2010 PA TRM specifies a Measure Life of 13 years for refrigerator replacement and 8 years for refrigerator retirement (Appendix A). It is assumed that the TRM listed measure life is either an Effective Useful Life (EUL) or Remaining Useful Life (RUL), as appropriate to the measure. Survey results from a study of the low-income program for SDG&E (2006) found that among the program’s target population, refrigerators are likely to be replaced less frequently than among average customers. Southern California Edison uses an EUL of 18 years for its Low-Income Refrigerator Replacement measure which reflects the less frequent replacement cycle among low-income households. The PA TRM limits measure savings to a maximum of 15 yrs.Due to the nature of a Refrigerator/Freezer Early Replacement Program, measure savings should be calculated over the life of the Energy StarENERGY STAR replacement unit. These savings should be calculated over two periods, the RUL of the existing unit, and the remainder of the measure life beyond the RUL. For the RUL of the existing unit, the energy savings would be equal to the full savings difference between the existing baseline unit and the Energy StarENERGY STAR unit, and for the remainder of the measure life the savings would be equal to the difference between a Federal Standard unit and the Energy StarENERGY STAR unit. The RUL can be assumed to be 1/3 of the measure EUL.As an example, Low-Income programs use a measure life of 18 years and an RUL of 6 yrs (1/3*18). The measure savings for the RUL of 6 yrs would be equal to the full savings. The savings for the remainder of 12 years would reflect savings from normal replacement of an Energy StarENERGY STAR refrigerator over a Federal Standard baseline, as defined in the TRM.Example Measure savings over lifetime = 1205 kWh/yr * 6 yrs + 100 kWh/yr (ES side mount freezer w/ door ice) * 12 yrs = 8430 kWh/measure lifetimeFor non-Low-Income specific programs, the measure life would be 13 years and an RUL of 4 yrs (1/3*15). The measure savings for the RUL of 4 yrs would be equal to the full savings. The savings for the remainder of 9 years would reflect savings from normal replacement of an Energy StarENERGY STAR refrigerator over a Federal Standard baseline, as defined in the TRM.Example Measure savings over lifetime = 1205 kWh/yr * 4 yrs + 100 kWh/yr (ES side mount freezer w/ door ice) * 9 yrs = 5720 kWh/measure lifetimeTo simplify the programs and remove the need to calculate two different savings, a compromise value for measure life of 7 years for both Low-Income specific and non-Low Income specific programs can be used with full savings over this entire period. This provides an equivalent savings as the Low-Income specific dual period methodology for an EUL of 18 yrs and a RUL of 6 yrs.Example Measure savings over lifetime = 1205 kWh/yr * 7 yrs = 8435 kWh/measure lifetimeRefrigerator/Freezer Retirement (and Recycling)Measure NameResidential Refrigerator/Freezer Retirement (and recycling)Target SectorResidential EstablishmentsMeasure UnitRefrigerator or FreezerUnit Annual Energy Savings1659kWhUnit Peak Demand Reduction0.2057kWMeasure Life8 yearsMeasure DescriptionThis measure is the retirement of an existing secondary refrigerator or freezer that is no less than 10 years old, without replacement.The deemed savings values for this measure can be applied to refrigerator and freezer retirements meeting the following criteria:Existing, working refrigerator or freezer 10-30 cubic feet in size (savings do not apply if unit is not working)Unit is 10 years old or older regardless of typeThe refrigerator or freezer is a secondary unit that will not be replaced.Definition of TermskWhRetFridge = Gross annual energy savings per unit retired appliancekWRetFridge = Summer demand savings per retired refrigerator/freezerCFRetFridge= Summer demand coincidence factor.Where:kWhRetFridge=1659 kWhCFRetFridge=0.620 hours=5000AlgorithmsTo determine resource savings, per unit estimates in the algorithms will be multiplied by the number of appliance units. The general form of the equation for the Refrigerator/Freezer Retirement savings algorithm is:Number of Units X Savings per UnitThe deemed savings values are based on the following algorithms or data research:kWhEnergy savings = kWhRetFridge kWpeak Coincident peak demand savings = kWRetFridge / hours * CFRetFridge Definition of TermskWhRetFridge = Gross annual energy savings per unit retired appliancekWRetFridge = Summer demand savings per retired refrigerator/freezerCFRetFridge= Summer demand coincidence factor.Where:kWhRetFridge=1659 kWhCFRetFridge=0.620 hours=5000Unit savings are the product of average fridge/freezer consumption (gross annual savings). The combined average refrigerator and freezer annual kWh consumption for Pennsylvania is based upon the data contained in the PA EDC appliance recycling contractor (JACO) databases. Because the manufacturer annual kWh consumption data was recorded in less than 50% of appliance collections, it was not used to calculate an average. SWE utilized the recorded year of manufacture in the “JACO Databases” and the annual kWh consumption data by size, age and refrigerator/freezer type contained in the Energy StarENERGY STAR Refrigerator Retirement Calculator. 203 incomplete or erroneous records, from a total 18479 records (1%) were removed from the sample prior to calculating the average annual kWh consumption.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 37 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 36: Energy and Demand SavingsSource/ReferenceEnergy and Demand SavingskWhRetFridgeCombined average refrigerator and freezer annual kWh consumption for Pennsylvania (based on all available PA EDC appliance recycling databases from JACO)1659kWhkWRetFridge =1659kWh/5000hours * 0.620.2057kWResidential New ConstructionAlgorithmsInsulation Up-Grades, Efficient Windows, Air Sealing, Efficient HVAC Equipment and Duct SealingEnergy savings due to improvements in Residential New Construction will be a direct output of accredited Home Energy Ratings (HERS) software that meets the applicable Mortgage Industry National Home Energy Rating System Standards. REM/Rate is cited here as an example of an accredited software which has a module that compares the energy characteristics of the energy efficient home to the baseline/reference home and calculates savings.The system peak electric demand savings will be calculated from the software output with the following savings’ algorithms, which are based on compliance and certification of the energy efficient home to the EPA’s ENERGY STAR for New Homes’ program standard:Peak demand of the baseline home = (PLb X OFb) / (SEERb X BLEER X 1,000).Peak demand of the qualifying home = (PLq X OFq) / (EERq X 1,000).Coincident system peak electric demand savings = (Peak demand of the baseline home – Peak demand of the qualifying home) X CF.Lighting and AppliancesQuantification of additional saving due to the addition of high-efficiency lighting and clothes washers will be based on the algorithms presented for these appliances in the Energy StarENERGY STAR Lighting Algorithms and the Energy StarENERGY STAR Appliances Algorithms, respectively. These algorithms are found in Energy StarENERGY STAR Products.Ventilation EquipmentAdditional energy savings of 175 kWh and peak-demand saving of 60 Watts will be added to the output of the home energy rating software to account for the installation of high-efficiency ventilation equipment. These values are based on a baseline fan of 80 Watts and an efficient fan of 20 Watts running for eight-hours per day.Definition of TermsPLb = Peak load of the baseline home in Btuh.OFb = The over- sizing factor for the HVAC unit in the baseline home.SEERb = The Seasonal Energy Efficiency Ratio of the baseline unit.BLEER = Factor to convert baseline SEERb to EERb.PLq = The actual predicted peak load for the program qualifying home constructed, in Btuh.OFq = The over-sizing factor for the HVAC unit in the program qualifying home.EERq = The EER associated with the HVAC system in the qualifying home.CF = Demand Coincidence Factor – the percentage of the total installed HVAC system’s connected load that is on during electric system’s peak window as defined in Section 1- Electric Resource Savings. A summary of the input values and their data sources follows:Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 38 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 37: Residential New Construction – ReferencesComponentTypeValueSourcesPLbVariable1OFbFixed1.62SEERbFixed133BLEERFixed0.924PLqVariableSoftware OutputOFqFixed1.155EERqVariableAEPS Application; EDC’s Data GatheringCFFixed0.706Sources:Calculation of peak load of baseline home from the home energy rating tool, based on the reference home energy characteristics.PSE&G 1997 Residential New Construction baseline study.Federal Register, Vol. 66, No. 14, Monday, January 22, 2001/Rules and Regulations, p. 7170-7200Engineering calculation.Program guideline for qualifying home.Based on an analysis of six different utilities by Proctor Engineering.The following tables describe the characteristics of the three reference homes.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 39 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 38: ENERGY STAR Homes: REMRate User Defined Reference Homes – ReferencesData PointValueActive SolarNoneCeiling InsulationU=0.031 (1)Radiant BarrierNoneRim/Band JoistU=0.141 Type A-1, U=0.215 Type A-2 (1)Exterior Walls - WoodU=0.141 Type A-1, U=0.215 Type A-2 (1)Exterior Walls - SteelU=0.141 Type A-1, U=0.215 Type A-2 (1)Foundation WallsU=0.99DoorsU=0.141 Type A-1, U=0.215 Type A-2 (1)WindowsU=0.141 Type A-1, U=0.215 Type A-2 (1), No SHGC req.Glass DoorsU=0.141 Type A-1, U=0.215 Type A-2 (1), No SHGC req.SkylightsU=0.031 (1), No SHGC req.Floor over GarageU=0.050 (1)Floor over Unheated BasementU=0.050 (1)Floor over CrawlspaceU=0.050 (1)Floor over Outdoor AirU=0.031 (1)Unheated Slab on GradeR-0 edge/R-4.3 underHeated Slab on GradeR-0 edge/R-6.4 underAir Infiltration Rate0.51 ACH winter/0.51 ACH summerDuct LeakageNo Observable Duct LeakageMechanical VentilationNoneLights and AppliancesUse DefaultSetback ThermostatYes for heating, no for coolingHeating Efficiency? Furnace80% AFUE (3) Boiler80% AFUE Combo Water Heater76% AFUE (recovery efficiency) Air Source Heat Pump7.7 HSPF Geothermal Heat PumpOpen not modeled, 3.0 COP closed PTAC / PTHPNot differentiated from air source HPCooling Efficiency? Central Air Conditioning13.0 SEER Air Source Heat Pump13.0 SEER Geothermal Heat Pump 3.4 COP (11.6 EER) PTAC / PTHPNot differentiated from central AC Window Air ConditionersNot differentiated from central ACDomestic WH Efficiency? Electric0.97 EF (4) Natural Gas0.67 EF (4)Water Heater Tank InsulationNoneDuct InsulationN/ATable STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 40 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 39: ENERGY STAR Homes: REMRate User Defined Reference Homes – ReferencesData PointValueDomestic WH Efficiency ElectricEF = 0.97 - (0.00132 * gallons) (1) Natural GasEF = 0.67 - (0.0019 * gallons) (1)ENERGY STAR AppliancesAlgorithmsThe general form of the equation for the ENERGY STAR Appliance measure savings’ algorithms is:Total Savings = Number of Units x Savings per UnitTo determine resource savings, the per unit estimates in the algorithms will be multiplied by the number of appliance units. The number of units will be determined using market assessments and market tracking. Some of these market tracking mechanisms are under development. Per unit savings’ estimates are derived primarily from a 2000 Market Update Report by RLW for National Grid’s appliance program and from previous NEEP screening tool assumptions (clothes washers).Note that the pre-July 2001 refrigerator measure has been deleted given the timing of program implementation. As no field results are expected until July 2001, there was no need to quantify savings relative to the pre-July 2001 efficiency standards improvement for refrigerators.ENERGY STAR RefrigeratorskWhElectricity Impact (kWh) = ESavREF kWpeakDemand Impact (kW) = DSavREF X CFREFENERGY STAR Clothes WasherskWhElectricity Impact (kWh) = ESavCW kWpeakDemand Impact (kW) = DSavCW X CFCWENERGY STAR DishwasherskWhElectricity Impact (kWh) = ESavDW kWpeakDemand Impact (kW) = DSavREF X CFDWENERGY STAR DehumidifierskWhElectricity Impact (kWh) = ESavDHkWpeakDemand Impact (kW) = DSavDH X CFDHENERGY STAR Room Air ConditionerskWhElectricity Impact (kWh) = ESavRAC kWpeakDemand Impact (kW) = DSavRAC X CFRACENERGY STAR FreezerkW= kWBASE – kWEEkWh= kW X HOURSDemand Impact (kW) = kWBASE – kWEEEnergy Impact (kWh) = kW X HOURSDefinition of TermsESavREF = Electricity savings per purchased Energy StarENERGY STAR refrigerator.DSavREF = Summer demand savings per purchased Energy StarENERGY STAR refrigerator.ESavCW = Electricity savings per purchased Energy StarENERGY STAR clothes washer.DSavCW = Summer demand savings per purchased Energy StarENERGY STAR clothes washer.ESavDW = Electricity savings per purchased Energy StarENERGY STAR dishwasher.DSavDW = Summer demand savings per purchased Energy StarENERGY STAR dishwasher.ESavDH = Electricity savings per purchased ENERGY STARENERGY STAR dehumidifierDSavDH = Summer demand savings per purchased ENERGY STARENERGY STAR dehumidifierESavRAC = Electricity savings per purchased Energy StarENERGY STAR room AC.DSavRAC = Summer demand savings per purchased Energy StarENERGY STAR room AC.CFREF, CFCW, CFDW, CFDH, CFRAC = Summer demand coincidence factor. The coincidence of average appliance demand to summer system peak equals 1 for demand impacts for all appliances reflecting embedded coincidence in the DSav factor (except for room air conditioners where the CF is 58%).kW = gross customer connected load kW savings for the measurekWBASE = Baseline connected kWkWEE = Energy efficient connected kWHOURS = average hours of use per yearTable STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 41 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 40: ENERGY STAR Appliances - ReferencesComponentTypeValueSourcesESavREFFixedsee REF _Ref261522586 \h \* MERGEFORMAT below12DSavREFFixed0.0125 kW1REF Time Period Allocation FactorsFixedSummer/On-Peak 20.9%Summer/Off-Peak 21.7%Winter/On-Peak 28.0%Winter/Off-Peak 29.4%2ESavCWFixedsee REF _Ref261522586 \h \* MERGEFORMAT below12DSavCWFixed0.0147 kW3CW Electricity Time Period Allocation FactorsFixedSummer/On-Peak 24.5%Summer/Off-Peak 12.8%Winter/On-Peak 41.7%Winter/Off-Peak 21.0%2ESavDWFixedsee REF _Ref261522586 \h \* MERGEFORMAT below12DSavDWFixed0.02254DW Electricity Time Period Allocation FactorsFixed19.8%, 21.8%, 27.8%, 30.6%2ESavDHFixedsee REF _Ref261522586 \h \* MERGEFORMAT below12DSavDHFixed.0098 kW10ESavRACFixedsee REF _Ref261522586 \h \* MERGEFORMAT below12DSavRACFixed0.1018 kW6CFREF, CFCW, CFDW, CFDH, CFRACFixed1.0, 1.0, 1.0, 1.0, 0.587RAC Time Period Allocation FactorsFixed65.1%, 34.9%, 0.0%, 0.0%2kWBASEFixed0.092611kWEEFixed0.081311HOURSFixed500011kWFixed0.011311Sources:Energy StarENERGY STAR Refrigerator Savings Calculator (Calculator updated: 2/15/05; Constants updated 05/07). Demand savings derived using refrigerator load shape.Time period allocation factors used in cost-effectiveness analysis. From residential appliance load shapes.Energy and water savings based on Consortium for Energy Efficiency estimates. Assumes 75% of participants have gas water heating and 60% have gas drying (the balance being electric). Demand savings derived using NEEP screening clothes washer load shape.Energy and water savings from RLW Market Update. Assumes 37% electric hot water market share and 63% gas hot water market share. Demand savings derived using dishwasher load shape.Energy and demand savings from engineering estimate based on 600 hours of use. Based on delta watts for ENERGY STAR and non-ENERGY STAR units in five different size (cooling capacity) categories. Category weights from LBNL Technical Support Document for ENERGY STAR Conservation Standards for Room Air Conditioners.Average demand savings based on engineering estimate.Coincidence factors already embedded in summer peak demand reduction estimates with the exception of RAC. RAC CF is based on data from PEPCO.Prorated based on six months in the summer period and six months in the winter period.Energy StarENERGY STAR Dehumidifier Savings Calculator (Calculator updated: 2/15/05; Constants updated 05/07). A weighted average based on the distribution of available ENERGY STAR products was used to determine savings.Conservatively assumes same kW/kWh ratio as Refrigerators.Efficiency Vermont. Technical Reference User Manual: Measure Savings Algorithms and Cost Assumptions (July 2008). All values are taken from the Energy StarENERGY STAR Savings Calculators at .Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 42 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 41: Energy Savings from Energy StarENERGY STAR CalculatorMeasureEnergy SavingsRefrigeratorManual Defrost72 kWhPartial Automatic Defrost72 kWhTop mount freezer without door ice80 kWhSide mount freezer without door ice95 kWhBottom mount freezer without door ice87 kWhTop mount freezer with door ice94 kWhSide mount freezer with door ice100 kWhFreezersUpright with manual defrost55 kWhUpright with automatic defrost80 kWhChest Freezer52 kWhCompact Upright with manual defrost62 kWhCompact Upright with automatic defrost83 kWhCompact Chest Freezer55 kWhDehumidifier1-25 pints/day54 kWh25-35 pints/day117 kWh35-45 pints/day213 kWh45-54 pints/day297 kWh54-75 pints/day342 kWh75-185 pints/day374 kWhRoom Air Conditioner (Load hours in parentheses)Allentown74 kWh (784 hours)Erie46 kWh (482 hours)Harrisburg88 kWh (929 hours)Philadelphia98 kWh (1032 hours)Pittsburgh70 kWh (737 hours)Scranton59 kWh (621 hours)Williamsport62 kWh (659 hours)DishwasherWith Gas Hot Water Heater77 kWhWith Electric Hot Water Heater137 kWhClothes WasherWith Gas Hot Water Heater26 kWhWith Electric Hot Water Heater258 kWhResidential ENERGY STAR LightingAlgorithmsSavings from installation of screw-in ENERGY STAR CFLs, ENERGY STAR fluorescent torchieres, ENERGY STAR indoor fixtures and ENERGY STAR outdoor fixtures are based on a straightforward algorithm that calculates the difference between existing and new wattage and the average daily hours of usage for the lighting unit being replaced. An “in-service” rate is used to reflect the fact that not all lighting products purchased are actually installed.The general form of the equation for the ENERGY STAR or other high-efficiency lighting energy savings algorithm is:Total Savings = Number of Units X Savings per UnitPer unit savings estimates are derived primarily from a 2004 Nexus Market Research report evaluating similar retail lighting programs in New England (MA, RI and VT)ENERGY STAR CFL Bulbs (screw-in)kWhElectricity Impact (kWh) = ((CFLwatts X (CFLhours X 365))/1000) X ISRCFLkWpeakPeak Demand Impact (kW) = (CFLwatts)/1000 X CF X ISRCFLENERGY STAR TorchiereskWhElectricity Impact (kWh) = ((Torchwatts X (Torchhours X 365))/1000) X ISRTorchkWpeakPeak Demand Impact (kW) = (Torchwatts)/1000 X CF X ISRTorchENERGY STAR Indoor Fixture (hard-wired, pin-based)kWhElectricity Impact (kWh) = ((IFwatts X (IFhours X 365))/1000) X ISRIFkWpeakPeak Demand Impact (kW) = (IFwatts)/1000 X CF X ISRIFENERGY STAR Outdoor Fixture (hard wired, pin-based)kWhElectricity Impact (kWh) = ((OFwatts X (OFhours X 365))/1000) X ISROFkWpeakPeak Demand Impact (kW) = (OFwatts)/1000 X CF X ISROFCeiling Fan with ENERGY STAR Light FixturekWhEnergy Savings (kWh) =180 kWh kWpeakDemand Savings (kW) = 0.01968Definition of TermsCFLwatts = Average delta watts per purchased Energy StarENERGY STAR CFLCFLhours = Average hours of use per day per CFLISRCFL = In-service rate per CFLTorchwatts = Average delta watts per purchased Energy StarENERGY STAR torchiereTorchhours = Average hours of use per day per torchiereISRTorch = In-service rate per TorchierIFwatts = Average delta watts per purchased Energy StarENERGY STAR Indoor FixtureIFhours = Average hours of use per day per Indoor FixtureISRIF = In-service rate per Indoor FixtureOFwatts = Average delta watts per purchased Energy StarENERGY STAR Outdoor FixtureOFhours = Average hours of use per day per Outdoor FixtureISROF = In-service rate per Outdoor FixtureCF = Demand Coincidence Factor – the percentage of the total lighting connected load that is on during electric system’s peak window as defined in Section 1- Electric Resource Savings.kWh = Gross customer annual kWh savings for the measurekW = Gross customer connected load kW savings for the measureTable STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 43 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 42: ENERGY STAR Lighting - ReferencesComponentTypeValueSourcesCFLwattsFixedVariableData GatheringCFLhoursFixed3.01.96ISRCFLFixed84%3TorchwattsFixed115.81TorchhoursFixed3.02ISRTorchFixed83%3IFwattsFixed48.71IFhoursFixed2.62ISRIFFixed95%3OFwattsFixed94.71OFhoursFixed4.52ISROFFixed87%3CFFixed5%4kWhFixed180 kWh5kWFixed0.019685Sources:Nexus Market Research, “Impact Evaluation of the Massachusetts, Rhode Island and Vermont 2003 Residential Lighting Programs”, Final Report, October 1, 2004, p. 43 (Table 4-9)Ibid., p. 104 (Table 9-7). This table adjusts for differences between logged sample and the much larger telephone survey sample and should, therefore, have less bias.Ibid., p. 42 (Table 4-7). These values reflect both actual installations and the % of units planned to be installed within a year from the logged sample. The logged % is used because the adjusted values (i.e to account for differences between logging and telephone survey samples) were not available for both installs and planned installs. However, this seems appropriate because the % actual installed in the logged sample from this table is essentially identical to the % after adjusting for differences between the logged group and the telephone sample (p. 100, Table 9-3).RLW Analytics, “Development of Common Demand Impacts for Energy Efficiency Measures/Programs for the ISO Forward Capacity Market (FCM)”, prepared for the New England State Program Working Group (SPWG), March 25, 2007, p. IV.Efficiency Vermont. Technical Reference User Manual: Measure Savings Algorithms and Cost Assumptions (July 2008).KEMA (2010) “Results from California’s Residential Lighting Metering Study”. The 1.9 average daily hours of use for all bulbs is based upon a large scale comprehensive residential lighting metering study of 1200 randomly selected households completed in 2010. Average hours of use for all household socket locations.US Department of Energy, Energy Star Calculator. Accessed 3-16-2009. ENERGY STAR WindowsAlgorithmsThe general form of the equation for the ENERGY STAR or other high-efficiency windows energy savings’ algorithms is:Total Savings = Square Feet of Window Area X Savings per Square FootTo determine resource savings, the per square foot estimates in the algorithms will be multiplied by the number of square feet of window area. The number of square feet of window area will be determined using market assessments and market tracking. Some of these market tracking mechanisms are under development. The per unit energy and demand savings estimates are based on prior building simulations of windows.Savings’ estimates for Energy StarENERGY STAR Windows are based on modeling a typical 2,500 square foot home using REM Rate, the home energy rating tool. Savings are per square foot of qualifying window area. Savings will vary based on heating and cooling system type and fuel. These fuel and HVAC system market shares will need to be estimated from prior market research efforts or from future program evaluation results.Heat Pump HVAC SystemkWhElectricity Impact (kWh) = ESavHP kWpeakDemand Impact (kW) = DSavHP X CFElectric Heat/Central Air ConditioningkWhElectricity Impact (kWh) = ESavRES/CACkWpeakDemand Impact (kW) = DSavCAC X CFElectric Heat/No Central Air ConditioningkWhElectricity Impact (kWh) = ESavRES/NOCACkWpeakDemand Impact (kW) = DSavNOCAC X CFDefinition of TermsESavHP = Electricity savings (heating and cooling) with heat pump installed.ESavRES/CAC = Electricity savings with electric resistance heating and central AC installed.ESavRES/NOCAC = Electricity savings with electric resistance heating and no central AC installed.DSavHP = Summer demand savings with heat pump installed.DSavCAC = Summer demand savings with central AC installed.DSavNOCAC = Summer demand savings with no central AC installed.CF = Demand Coincidence Factor – the percentage of the total HVAC connected load that is on during electric system’s peak window as defined in Section 1- Electric Resource Savings.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 44 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 43: ENERGY STAR Windows - ReferencesComponentTypeValueSourcesESavHPFixed2.2395 kWh/ft21HP Time Period Allocation FactorsFixedSummer/On-Peak 10%Summer/Off-Peak 7%Winter/On-Peak 40%Winter/Off-Peak 44%2ESavRES/CACFixed4.0 kWh/ft21Res/CAC Time Period Allocation FactorsFixedSummer/On-Peak 10%Summer/Off-Peak 7%Winter/On-Peak 40%Winter/Off-Peak 44%2ESavRES/NOCACFixed3.97 kWh/ft21Res/No CAC Time Period Allocation FactorsFixedSummer/On-Peak 3%Summer/Off-Peak 3%Winter/On-Peak 45%Winter/Off-Peak 49%2DSavHPFixed0.000602 kW/ft21DSavCACFixed0.000602 kW/ft21DSavNOCACFixed0.00 kW/ft21CFFixed0.753Sources:From REMRATE Modeling of a typical 2,500 sq. ft. NJ home. Savings expressed on a per square foot of window area basis. New Brunswick climate data. Time period allocation factors used in cost-effectiveness analysis.Based on reduction in peak cooling load.Prorated based on 12% of the annual degree days falling in the summer period and 88% of the annual degree days falling in the winter period.ENERGY STAR AuditAlgorithmsNo algorithm was developed to measure energy savings for this program. The purpose of the program is to provide information and tools that residential customers can use to make decisions about what actions to take to improve energy efficiency in their homes. Many measure installations that are likely to produce significant energy savings are covered in other programs. These savings are captured in the measured savings for those programs. The savings produced by this program that are not captured in other programs would be difficult to isolate and relatively expensive to measure.ENERGY STAR Refrigerator/Freezer RetirementAlgorithmsThe general form of the equation for the Refrigerator/Freezer Retirement savings algorithm is:Total Savings = Number of Units X Savings per UnitTo determine resource savings, the per unit estimates in the algorithms will be multiplied by the number of appliance units. Unit savings are the product of average fridge/freezer consumption (gross annual savings). kWhElectricity Impact (kWh) = ESavRetFridge kWpeakDemand Impact (kW) = DSavRetFridge X CFRetFridgeDefinition of TermsESavRetFridge = Gross annual energy savings per unit retired applianceDSavRetFridge = Summer demand savings per retired refrigerator/freezerCFRetFridge = Demand Coincidence Factor – the percentage of the retired appliance connected load that is on during electric system’s peak window as defined in Section 1- Electric Resource Savings.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 45 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 44: Refrigerator/Freezer Recycling – ReferencesComponentTypeValueSourcesESavRetFridgeFixed1,728 kWh1DSavRetFridgeFixed.2376 kW2CFRetFridgeFixed13Sources: The average power consumption of units retired under similar recent programs:Fort Collins Utilities, February 2005. Refrigerator and Freezer Recycling Program 2004 Evaluation Report.Midwest Energy Efficiency Alliance, 2005. 2005 Missouri Energy StarENERGY STAR Refrigerator Rebate and Recycling Program Final ReportPacific Gas and Electric, 2007. PGE ARP 2006-2008 Climate Change Impacts Model (spreadsheet)Quantec, Aug 2005. Evaluation of the Utah Refrigerator and Freezer Recycling Program (Draft Final Report).CPUC DEER website, HYPERLINK "" PUD, February 2007. 2006 Refrigerator/Freezer Recycling Program Evaluation.Ontario Energy Board, 2006. Total Resource Cost Guide.Applied the kW to kWh ratio derived from Refrigerator savings in the ENERGY STAR Appliances Program.Coincidence factor already embedded in summer peak demand reduction estimatesHome Performance with ENERGY STAR In order to implement Home Performance with Energy StarENERGY STAR, there are various standards a program implementer must adhere to in order to deliver the program. The program implementer must use software that meets a national standard for savings calculations from whole-house approaches such as home performance. The software program implementer must adhere to at least one of the following standards:A software tool whose performance has passed testing according to the National Renewable Energy Laboratory’s HERS BESTEST software energy simulation testing protocol.Software approved by the US Department of Energy’s Weatherization Assistance Program.RESNET approved rating software.There are numerous software packages that comply with these standards. Some examples of the software packages are REM/Rate, EnergyGauge, TREAT, and HomeCheck. The HomeCheck software is described below as an example of a software that can be used to determine if a home qualifies for Home Performance with Energy StarENERGY STAR.HomeCheck Software ExampleConservation Services Group (CSG) implements Home Performance with Energy StarENERGY STAR in several states. CSG has developed proprietary software known as HomeCheck which is designed to enable an energy auditor to collect information about a customer’s site and based on what is found through the energy audit, recommend energy savings measures and demonstrate the costs and savings associated with those recommendations. The HomeCheck software is also used to estimate the energy savings that are reported for this program.CSG has provided a description of the methods and inputs utilized in the HomeCheck software to estimate energy savings. CSG has also provided a copy of an evaluation report prepared by Nexant which assessed the energy savings from participants in the Home Performance with Energy StarENERGY STAR Program managed by the New York State Energy Research and Development Authority (NYSERDA). The report concluded that the savings estimated by HomeCheck and reported to NYSERDA were in general agreement with the savings estimates that resulted from the evaluation.These algorithms incorporate the HomeCheck software by reference which will be utilized for estimating energy savings for Home Performance with Energy StarENERGY STAR. The following is a summary of the HomeCheck software which was provided by CSG: CSG’s HomeCheck software was designed to streamline the delivery of energy efficiency programs. The software provides the energy efficiency specialist with an easy-to-use guide for data collection, site and HVAC testing algorithms, eligible efficiency measures, and estimated energy savings. The software is designed to enable an auditor to collect information about customers’ sites and then, based on what he/she finds through the audit, recommend energy-saving measures, demonstrate the costs and savings associated with those recommendations. It also enables an auditor/technician to track the delivery of services and installation of measures at a site. This software is a part of an end-to-end solution for delivering high-volume retrofit programs, covering administrative functions such as customer relationship management, inspection scheduling, sub-contractor arranging, invoicing and reporting. The range of existing components of the site that can be assessed for potential upgrades is extensive and incorporates potential modifications to almost all energy using aspects of the home. The incorporation of building shell, equipment, distribution systems, lighting, appliances, diagnostic testing and indoor air quality represents a very broad and comprehensive ability to view the needs of a home. The software is designed to combine two approaches to assessing energy savings opportunities at the site. One is a measure specific energy loss calculation, identifying the change in use of BTU’s achieved by modifying a component of the site. Second, is the correlation between energy savings from various building improvements, and existing energy use patterns at a site. The use of both calculated savings and the analysis of existing energy use patterns, when possible, provides the most accurate prescription of the impact of changes at the site for an existing customer considering improvements on a retrofit basis. This software is not designed to provide a load calculation for new equipment or a HERS rating to compare a site to a standard reference site. It is designed to guide facilities in planning improvements at the site with the goal of improved economics, comfort and safety. The software calculates various economic evaluations such as first year savings, simple payback, measure life cost-effectiveness, and Savings-to-Investment ratio (SIR).Site-Level Parameters and Calculations There are a number of calculations and methodologies that apply across measures and form the basis for calculating savings potentials at a site. Heating Degree Days and Cooling Degree Hours Heat transfer calculations depend fundamentally on the temperature difference between inside and outside temperature. This temperature difference is often summarized on a seasonal basis using fixed heating degree-days (HDD) and cooling degree-hours (CDH). The standard reference temperature for calculating HDD (the outside temperature at which the heating system is required), for example, has historically been 65°F. Modern houses have larger internal gains and more efficient thermal building envelopes than houses did when the 65°F standard was developed, leading to lower effective reference temperatures. This fact has been recognized in ASHRAE Fundamentals, which provides a variable-based degree-day method for calculating energy usage. CSG’s Building Model calculates both HDD and CDH based on the specific characteristics and location of the site being treated. Building Loads, Other Parameters, and the Building Model CSG is of the opinion that, in practice, detailed building load simulation tools are quite limited in their potential to improve upon simpler approaches due to their reliance on many factors that are not measurable or known, as well as limitations to the actual models themselves. Key to these limitations is the Human Factor (e.g., sleeping with the windows open; extensive use of high-volume extractor fans, etc.) that is virtually impossible to model. As such, the basic concept behind the model was to develop a series of location specific lookup tables that would take the place of performing hourly calculations while allowing the model to perform for any location. The data in these tables would then be used along with a minimum set of technical data to calculate heating and cooling building loads. In summary, the model uses: Lookup tables for various parameters that contain the following values for each of the 239 TMY2 weather stations: Various heating and cooling infiltration factors. Heating degree days and heating hours for a temperature range of 40 to 72°F. Cooling degree hours and cooling hours for a temperature range of 68 to 84°F. Heating and cooling season solar gain factors. Simple engineering algorithms based on accepted thermodynamic principles, adjusted to reflect known errors, the latest research and measured results Heating season iterative calculations to account for the feedback loop between conditioned hours, degree days, average “system on” indoor and outdoor temperatures and the buildingThe thermal behavior of homes is complex and commonly accepted algorithms will on occasion predict unreasonably high savings, HomeCheck uses a proprietary methodology to identify and adjust these cases. This methodology imposes limits on savings projected by industry standard calculations, to account for interactivities and other factors that are difficult to model. These limits are based on CSG’s measured experience in a wide variety of actual installations.Usage Analysis The estimation of robust building loads through the modeling of a building is not always reliable. Thus, in addition to modeling the building, HomeCheck calculates a normalized annual consumption for heating and cooling, calculated from actual fuel consumption and weather data using a Seasonal Swing methodology. This methodology uses historic local weather data and site-specific usage to calculate heating and cooling loads. The methodology uses 30-year weather data to determine spring and fall shoulder periods when no heating or cooling is likely to be in use. The entered billing history is broken out into daily fuel consumption, and these daily consumption data along with the shoulder periods is used to calculate base load usage and summer and winter seasonal swing fuel consumption. Multiple HVAC Systems HVAC system and distribution seasonal efficiencies are used in all thermal-shell measure algorithms. HVAC system and distribution seasonal efficiencies and thermostat load reduction adjustments are used when calculating the effect of interactivity between mechanical and architectural measures. If a site has multiple HVAC systems, weighted average seasonal efficiencies and thermostat load reduction adjustments are calculated based on the relative contributions (in terms of percent of total load) of each system. Multiple Heating Fuels It is not unusual to find homes with multiple HVAC systems using different fuel types. In these cases, it is necessary to aggregate the NACs for all fuel sources for use in shell savings algorithms. This is achieved by assigning a percentage contribution to total NAC for each system, converting this into BTU’s, and aggregating the result. Estimated first year savings for thermal shell measures are then disaggregated into the component fuel types based on the pre-retrofit relative contributions of fuel types. InteractivityTo account for interactivity between architectural and mechanical measures, CSG’s HomeCheck employs the following methodology, in order: Noninteracted first year savings are calculated for each individual measure. Non-interacted SIR (RawSIR) is calculated for each measure. Measures are ranked in descending order of RawSIR, Starting with the most cost-effective measure (as defined by RawSIR), first year savings are adjusted for each measure as follows: Mechanical measures (such as thermostats, HVAC system upgrades or distribution system upgrades) are adjusted to account for the load reduction from measures with a higher RawSIR.Architectural measures are adjusted to account for overall HVAC system efficiency changes and thermostat load reduction changes. Architectural measures with a higher RawSIR than that of HVAC system measures are calculated using the existing efficiencies. Those with RawSIR’s lower than that of heating equipment use the new heating efficiencies. Interacted SIR is then calculated for each measure, along with cumulative SIR for the entire job. All measures are then re-ranked in descending order of SIR. The process is repeated, replacing RawSIR with SIR until the order of measures does not change. LightingQuantification of additional savings due to the addition of high efficiency lighting will be based on the applicable algorithms presented for these appliances in the Energy StarENERGY STAR Lighting Algorithms section found in Energy StarENERGY STAR Products.Residential New Construction MeasuresInsulation Up-Grades, Efficient Windows, Air Sealing, Efficient HVAC Equipment and Duct SealingEnergy savings due to improvements in Residential New Construction will be a direct output of accredited Home Energy Ratings (HERS) software that meets the applicable Mortgage Industry National Home Energy Rating System Standards. REM/Rate is cited here as an example of an accredited software which has a module that compares the energy characteristics of the energy efficient home to the baseline/reference home and calculates savings.The system peak electric demand savings will be calculated from the software output with the following savings’ algorithms, which are based on compliance and certification of the energy efficient home to the EPA’s ENERGY STAR for New Homes’ program standard:Peak demand of the baseline home = (PLb X OFb) / (SEERb X BLEER X 1,000).Peak demand of the qualifying home = (PLq X OFq) / (EERq X 1,000).Coincident system peak electric demand savings = (Peak demand of the baseline home – Peak demand of the qualifying home) X CF.Lighting and AppliancesQuantification of additional saving due to the addition of high-efficiency lighting and clothes washers will be based on the algorithms presented for these appliances in the Energy Star Lighting Algorithms and the Energy Star Appliances Algorithms, respectively. These algorithms are found in Energy Star Products.Ventilation EquipmentAdditional energy savings of 175 kWh and peak-demand saving of 60 Watts will be added to the output of the home energy rating software to account for the installation of high-efficiency ventilation equipment. These values are based on a baseline fan of 80 Watts and an efficient fan of 20 Watts running for eight-hours per day.Definition of TermsPLb = Peak load of the baseline home in Btuh.OFb = The over sizing factor for the HVAC unit in the baseline home.SEERb = The Seasonal Energy Efficiency Ratio of the baseline unit.BLEER = Factor to convert baseline SEERb to EERb.PLq = The actual predicted peak load for the program qualifying home constructed, in Btuh.OFq = The oversizing factor for the HVAC unit in the program qualifying home.EERq = The EER associated with the HVAC system in the qualifying home.CF = Demand Coincidence Factor – the percentage of the total installed HVAC system’s connected load that is on during electric system’s peak window as defined in Section 1- Electric Resource Savings. The coincidence factor which equates the installed HVAC system’s demand to its demand at time of system peak.A summary of the input values and their data sources follows:Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 1 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 1: Residential New Construction – ReferencesComponentTypeValueSourcesPLbVariable1OFbFixed1.62SEERbFixed133BLEERFixed0.924PLqVariableSoftware OutputOFqFixed1.155EERqVariableAEPS Application; EDC’s Data GatheringCFFixed0.706Sources:Calculation of peak load of baseline home from the home energy rating tool, based on the reference home energy characteristics.PSE&G 1997 Residential New Construction baseline study.Federal Register, Vol. 66, No. 14, Monday, January 22, 2001/Rules and Regulations, p. 7170-7200Engineering calculation.Program guideline for qualifying home.Based on an analysis of six different utilities by Proctor Engineering.The following tables describe the characteristics of the three reference homes.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 2 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 2: ENERGY STAR Homes: REMRate User Defined Reference Homes – ReferencesData PointValueActive SolarNoneCeiling InsulationU=0.031 (1)Radiant BarrierNoneRim/Band JoistU=0.141 Type A-1, U=0.215 Type A-2 (1)Exterior Walls - WoodU=0.141 Type A-1, U=0.215 Type A-2 (1)Exterior Walls - SteelU=0.141 Type A-1, U=0.215 Type A-2 (1)Foundation WallsU=0.99DoorsU=0.141 Type A-1, U=0.215 Type A-2 (1)WindowsU=0.141 Type A-1, U=0.215 Type A-2 (1), No SHGC req.Glass DoorsU=0.141 Type A-1, U=0.215 Type A-2 (1), No SHGC req.SkylightsU=0.031 (1), No SHGC req.Floor over GarageU=0.050 (1)Floor over Unheated BasementU=0.050 (1)Floor over CrawlspaceU=0.050 (1)Floor over Outdoor AirU=0.031 (1)Unheated Slab on GradeR-0 edge/R-4.3 underHeated Slab on GradeR-0 edge/R-6.4 underAir Infiltration Rate0.51 ACH winter/0.51 ACH summerDuct LeakageNo Observable Duct LeakageMechanical VentilationNoneLights and AppliancesUse DefaultSetback ThermostatYes for heating, no for coolingHeating Efficiency? Furnace80% AFUE (3) Boiler80% AFUE Combo Water Heater76% AFUE (recovery efficiency) Air Source Heat Pump7.7 HSPF Geothermal Heat PumpOpen not modeled, 3.0 COP closed PTAC / PTHPNot differentiated from air source HPCooling Efficiency? Central Air Conditioning13.0 SEER Air Source Heat Pump13.0 SEER Geothermal Heat Pump 3.4 COP (11.6 EER) PTAC / PTHPNot differentiated from central AC Window Air ConditionersNot differentiated from central ACDomestic WH Efficiency? Electric0.97 EF (4) Natural Gas0.67 EF (4)Water Heater Tank InsulationNoneDuct InsulationN/ATable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 3 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 3: ENERGY STAR Homes: REMRate User Defined Reference Homes – ReferencesData PointValueDomestic WH Efficiency ElectricEF = 0.97 - (0.00132 * gallons) (1) Natural GasEF = 0.67 - (0.0019 * gallons) (1)ENERGY STAR ProductsENERGY STAR AppliancesAlgorithmsThe general form of the equation for the ENERGY STAR Appliance measure savings’ algorithms is:Total Savings = Number of Units x Savings per UnitTo determine resource savings, the per unit estimates in the algorithms will be multiplied by the number of appliance units. The number of units will be determined using market assessments and market tracking. Some of these market tracking mechanisms are under development. Per unit savings’ estimates are derived primarily from a 2000 Market Update Report by RLW for National Grid’s appliance program and from previous NEEP screening tool assumptions (clothes washers).Note that the pre-July 2001 refrigerator measure has been deleted given the timing of program implementation. As no field results are expected until July 2001, there was no need to quantify savings relative to the pre-July 2001 efficiency standards improvement for refrigerators.ENERGY STAR RefrigeratorsElectricity Impact (kWh) = ESavREF Demand Impact (kW) = DSavREF X CFREFENERGY STAR Clothes WashersElectricity Impact (kWh) = ESavCW Demand Impact (kW) = DSavCW X CFCWENERGY STAR DishwashersElectricity Impact (kWh) = ESavDW Demand Impact (kW) = DSavREF X CFDWENERGY STAR DehumidifiersElectricity Impact (kWh) = ESavDHDemand Impact (kW) = DSavDH X CFDHENERGY STAR Room Air ConditionersElectricity Impact (kWh) = ESavRAC Demand Impact (kW) = DSavRAC X CFRACENERGY STAR FreezerDemand Impact (kW) = kWBASE – kWEEEnergy Impact (kWh) = kW X HOURSDefinition of TermsESavREF = Electricity savings per purchased Energy Star refrigerator.DSavREF = Summer demand savings per purchased Energy Star refrigerator.ESavCW = Electricity savings per purchased Energy Star clothes washer.DSavCW = Summer demand savings per purchased Energy Star clothes washer.ESavDW = Electricity savings per purchased Energy Star dishwasher.DSavDW = Summer demand savings per purchased Energy Star dishwasher.ESavDH = Electricity savings per purchased ENERGY STAR dehumidifierDSavDH = Summer demand savings per purchased ENERGY STAR dehumidifierESavRAC = Electricity savings per purchased Energy Star room AC.DSavRAC = Summer demand savings per purchased Energy Star room AC.CFREF, CFCW, CFDW, CFDH, CFRAC = Summer demand coincidence factor. The coincidence of average appliance demand to summer system peak equals 1 for demand impacts for all appliances reflecting embedded coincidence in the DSav factor ( except for room air conditioners where the CF is 58%).kW = gross customer connected load kW savings for the measurekWBASE = Baseline connected kWkWEE = Energy efficient connected kWHOURS = average hours of use per yearTable STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 1 STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 1: ENERGY STAR Appliances - ReferencesComponentTypeValueSourcesESavREFFixedsee REF _Ref261522586 \h \* MERGEFORMAT Table 402 below12DSavREFFixed0.0125 kW1REF Time Period Allocation FactorsFixedSummer/On-Peak 20.9%Summer/Off-Peak 21.7%Winter/On-Peak 28.0%Winter/Off-Peak 29.4%2ESavCWFixedsee REF _Ref261522586 \h \* MERGEFORMAT Table 402 below12DSavCWFixed0.0147 kW3CW Electricity Time Period Allocation FactorsFixedSummer/On-Peak 24.5%Summer/Off-Peak 12.8%Winter/On-Peak 41.7%Winter/Off-Peak 21.0%2ESavDWFixedsee REF _Ref261522586 \h \* MERGEFORMAT Table 402 below12DSavDWFixed0.02254DW Electricity Time Period Allocation FactorsFixed19.8%, 21.8%, 27.8%, 30.6%2ESavDHFixedsee REF _Ref261522586 \h \* MERGEFORMAT Table 402 below12DSavDHFixed.0098 kW10ESavRACFixedsee REF _Ref261522586 \h \* MERGEFORMAT Table 402 below12DSavRACFixed0.1018 kW6CFREF, CFCW, CFDW, CFDH, CFRACFixed1.0, 1.0, 1.0, 1.0, 0.587RAC Time Period Allocation FactorsFixed65.1%, 34.9%, 0.0%, 0.0%2kWBASEFixed0.092611kWEEFixed0.081311HOURSFixed500011kWFixed0.011311Sources:Energy Star Refrigerator Savings Calculator (Calculator updated: 2/15/05; Constants updated 05/07). Demand savings derived using refrigerator load shape.Time period allocation factors used in cost-effectiveness analysis. From residential appliance load shapes.Energy and water savings based on Consortium for Energy Efficiency estimates. Assumes 75% of participants have gas water heating and 60% have gas drying (the balance being electric). Demand savings derived using NEEP screening clothes washer load shape.Energy and water savings from RLW Market Update. Assumes 37% electric hot water market share and 63% gas hot water market share. Demand savings derived using dishwasher load shape.Energy and demand savings from engineering estimate based on 600 hours of use. Based on delta watts for ENERGY STAR and non-ENERGY STAR units in five different size (cooling capacity) categories. Category weights from LBNL Technical Support Document for ENERGY STAR Conservation Standards for Room Air Conditioners.Average demand savings based on engineering estimate.Coincidence factors already embedded in summer peak demand reduction estimates with the exception of RAC. RAC CF is based on data from PEPCO.Prorated based on six months in the summer period and six months in the winter period.Energy Star Dehumidifier Savings Calculator (Calculator updated: 2/15/05; Constants updated 05/07). A weighted average based on the distribution of available ENERGY STAR products was used to determine savings.Conservatively assumes same kW/kWh ratio as Refrigerators.Efficiency Vermont. Technical Reference User Manual: Measure Savings Algorithms and Cost Assumptions (July 2008). All values are taken from the Energy Star Savings Calculators at .Table STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 2 STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 2: Energy Savings from Energy Star CalculatorMeasureEnergy SavingsRefrigeratorManual Defrost72 kWhPartial Automatic Defrost72 kWhTop mount freezer without door ice80 kWhSide mount freezer without door ice95 kWhBottom mount freezer without door ice87 kWhTop mount freezer with door ice94 kWhSide mount freezer with door ice100 kWhFreezersUpright with manual defrost55 kWhUpright with automatic defrost80 kWhChest Freezer52 kWhCompact Upright with manual defrost62 kWhCompact Upright with automatic defrost83 kWhCompact Chest Freezer55 kWhDehumidifier1-25 pints/day54 kWh25-35 pints/day117 kWh35-45 pints/day213 kWh45-54 pints/day297 kWh54-75 pints/day342 kWh75-185 pints/day374 kWhRoom Air Conditioner (Load hours in parentheses)Allentown74 kWh (784 hours)Erie46 kWh (482 hours)Harrisburg88 kWh (929 hours)Philadelphia98 kWh (1032 hours)Pittsburgh70 kWh (737 hours)Scranton59 kWh (621 hours)Williamsport62 kWh (659 hours)DishwasherWith Gas Hot Water Heater77 kWhWith Electric Hot Water Heater137 kWhClothes WasherWith Gas Hot Water Heater26 kWhWith Electric Hot Water Heater258 kWhResidential ENERGY STAR LightingAlgorithmsSavings from installation of screw-in ENERGY STAR CFLs, ENERGY STAR fluorescent torchieres, ENERGY STAR indoor fixtures and ENERGY STAR outdoor fixtures are based on a straightforward algorithm that calculates the difference between existing and new wattage and the average daily hours of usage for the lighting unit being replaced. An “in-service” rate is used to reflect the fact that not all lighting products purchased are actually installed.The general form of the equation for the ENERGY STAR or other high-efficiency lighting energy savings algorithm is:Total Savings = Number of Units X Savings per UnitPer unit savings estimates are derived primarily from a 2004 Nexus Market Research report evaluating similar retail lighting programs in New England (MA, RI and VT)ENERGY STAR CFL Bulbs (screw-in)Electricity Impact (kWh) = ((CFLwatts X (CFLhours X 365))/1000) X ISRCFLPeak Demand Impact (kW) = (CFLwatts)/1000 X Light CF X ISRCFLENERGY STAR TorchieresElectricity Impact (kWh) = ((Torchwatts X (Torchhours X 365))/1000) X ISRTorchPeak Demand Impact (kW) = (Torchwatts)/1000 X Light CF X ISRTorchENERGY STAR Indoor Fixture (hard-wired, pin-based)Electricity Impact (kWh) = ((IFwatts X (IFhours X 365))/1000) X ISRIFPeak Demand Impact (kW) = (IFwatts)/1000 X Light CF X ISRIFENERGY STAR Outdoor Fixture (hard wired, pin-based)Electricity Impact (kWh) = ((OFwatts X (OFhours X 365))/1000) X ISROFPeak Demand Impact (kW) = (OFwatts)/1000 X Light CF X ISROFCeiling Fan with ENERGY STAR Light FixtureEnergy Savings (kWh) =180 kWh Demand Savings (kW) = 0.01968Definition of TermsCFLwatts = Average delta watts per purchased Energy Star CFLCFLhours = Average hours of use per day per CFLISRCFL = In-service rate per CFLTorchwatts = Average delta watts per purchased Energy Star torchiereTorchhours = Average hours of use per day per torchiereISRTorch = In-service rate per TorchierIFwatts = Average delta watts per purchased Energy Star Indoor FixtureIFhours = Average hours of use per day per Indoor FixtureISRIF = In-service rate per Indoor FixtureOFwatts = Average delta watts per purchased Energy Star Outdoor FixtureOFhours = Average hours of use per day per Outdoor FixtureISROF = In-service rate per Outdoor FixtureLight CF =Summer demand coincidence factor Demand Coincidence Factor – the percentage of the total lighting connected load that is on during electric system’s peak window as defined in Section 1- Electric Resource Savings.. kWh = Gross customer annual kWh savings for the measurekW = Gross customer connected load kW savings for the measureTable STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 3 STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 3: ENERGY STAR Lighting - ReferencesComponentTypeValueSourcesCFLwattsFixedVariableData GatheringCFLhoursFixed3.06ISRCFLFixed84%3TorchwattsFixed115.81TorchhoursFixed3.02ISRTorchFixed83%3IFwattsFixed48.71IFhoursFixed2.62ISRIFFixed95%3OFwattsFixed94.71OFhoursFixed4.52ISROFFixed87%3Light CFFixed5%4kWhFixed180 kWh5kWFixed0.019685Sources:Nexus Market Research, “Impact Evaluation of the Massachusetts, Rhode Island and Vermont 2003 Residential Lighting Programs”, Final Report, October 1, 2004, p. 43 (Table 4-9)Ibid., p. 104 (Table 9-7). This table adjusts for differences between logged sample and the much larger telephone survey sample and should, therefore, have less bias.Ibid., p. 42 (Table 4-7). These values reflect both actual installations and the % of units planned to be installed within a year from the logged sample. The logged % is used because the adjusted values (i.e to account for differences between logging and telephone survey samples) were not available for both installs and planned installs. However, this seems appropriate because the % actual installed in the logged sample from this table is essentially identical to the % after adjusting for differences between the logged group and the telephone sample (p. 100, Table 9-3).RLW Analytics, “Development of Common Demand Impacts for Energy Efficiency Measures/Programs for the ISO Forward Capacity Market (FCM)”, prepared for the New England State Program Working Group (SPWG), March 25, 2007, p. IV.Efficiency Vermont. Technical Reference User Manual: Measure Savings Algorithms and Cost Assumptions (July 2008).US Department of Energy, Energy Star Calculator. Accessed 3-16-2009. ENERGY STAR WindowsAlgorithmsThe general form of the equation for the ENERGY STAR or other high-efficiency windows energy savings’ algorithms is:Total Savings = Square Feet of Window Area X Savings per Square FootTo determine resource savings, the per square foot estimates in the algorithms will be multiplied by the number of square feet of window area. The number of square feet of window area will be determined using market assessments and market tracking. Some of these market tracking mechanisms are under development. The per unit energy and demand savings estimates are based on prior building simulations of windows.Savings’ estimates for Energy Star Windows are based on modeling a typical 2,500 square foot home using REM Rate, the home energy rating tool. Savings are per square foot of qualifying window area. Savings will vary based on heating and cooling system type and fuel. These fuel and HVAC system market shares will need to be estimated from prior market research efforts or from future program evaluation results.Heat Pump HVAC SystemElectricity Impact (kWh) = ESavHP Demand Impact (kW) = DSavHP X CFElectric Heat/Central Air ConditioningElectricity Impact (kWh) = ESavRES/CACDemand Impact (kW) = DSavCAC X CFElectric Heat/No Central Air ConditioningElectricity Impact (kWh) = ESavRES/NOCACDemand Impact (kW) = DSavNOCAC X CFDefinition of TermsESavHP = Electricity savings (heating and cooling) with heat pump installed.ESavRES/CAC = Electricity savings with electric resistance heating and central AC installed.ESavRES/NOCAC = Electricity savings with electric resistance heating and no central AC installed.DSavHP = Summer demand savings with heat pump installed.DSavCAC = Summer demand savings with central AC installed.DSavNOCAC = Summer demand savings with no central AC installed.CF = System peak demand coincidence factor. Coincidence of building cooling demand to summer system peak Demand Coincidence Factor – the percentage of the total HVAC connected load that is on during electric system’s peak window as defined in Section 1- Electric Resource Savings..Table STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 4 STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 4: ENERGY STAR Windows - ReferencesComponentTypeValueSourcesESavHPFixed2.2395 kWh/ft21HP Time Period Allocation FactorsFixedSummer/On-Peak 10%Summer/Off-Peak 7%Winter/On-Peak 40%Winter/Off-Peak 44%2ESavRES/CACFixed4.0 kWh/ft21Res/CAC Time Period Allocation FactorsFixedSummer/On-Peak 10%Summer/Off-Peak 7%Winter/On-Peak 40%Winter/Off-Peak 44%2ESavRES/NOCACFixed3.97 kWh/ft21Res/No CAC Time Period Allocation FactorsFixedSummer/On-Peak 3%Summer/Off-Peak 3%Winter/On-Peak 45%Winter/Off-Peak 49%2DSavHPFixed0.000602 kW/ft21DSavCACFixed0.000602 kW/ft21DSavNOCACFixed0.00 kW/ft21CFFixed0.753Sources:From REMRATE Modeling of a typical 2,500 sq. ft. NJ home. Savings expressed on a per square foot of window area basis. New Brunswick climate data. Time period allocation factors used in cost-effectiveness analysis.Based on reduction in peak cooling load.Prorated based on 12% of the annual degree days falling in the summer period and 88% of the annual degree days falling in the winter period.ENERGY STAR AuditAlgorithmsNo algorithm was developed to measure energy savings for this program. The purpose of the program is to provide information and tools that residential customers can use to make decisions about what actions to take to improve energy efficiency in their homes. Many measure installations that are likely to produce significant energy savings are covered in other programs. These savings are captured in the measured savings for those programs. The savings produced by this program that are not captured in other programs would be difficult to isolate and relatively expensive to measure.Refrigerator/Freezer RetirementAlgorithmsThe general form of the equation for the Refrigerator/Freezer Retirement savings algorithm is:Total Savings = Number of Units X Savings per UnitTo determine resource savings, the per unit estimates in the algorithms will be multiplied by the number of appliance units. Unit savings are the product of average fridge/freezer consumption (gross annual savings). Electricity Impact (kWh) = ESavRetFridge Demand Impact (kW) = DSavRetFridge X CFRetFridgeDefinition of TermsESavRetFridge = Gross annual energy savings per unit retired applianceDSavRetFridge = Summer demand savings per retired refrigerator/freezerCFRetFridge = Demand Coincidence Factor – the percentage of the retired appliance connected load that is on during electric system’s peak window as defined in Section 1- Electric Resource Savings.Summer demand coincidence factor.Table STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 5 STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 5: Refrigerator/Freezer Recycling – ReferencesComponentTypeValueSourcesESavRetFridgeFixed1,728 kWh1DSavRetFridgeFixed.2376 kW2CFRetFridgeFixed13ENERGY STAR Televisions (Versions 4.1 and 5.1)Measure DescriptionThis measure applies to the purchase of an ENERGY STAR TV meeting Version 4.1 or Version 5.1 standards. Version 4.1 standards are effective as of May 1, 2010, and Version 5.1 standards are effective as of May 1, 2012.The baseline equipment is a TV meeting ENERGY STAR Version 3.0 requirements.AlgorithmsEnergy Savings (per TV):?kWh = Wbase, active- WES, active1000× HOURSactive ×365Coincident Demand Savings (per TV):?kW = Wbase,active- WES, active1000 ×CFSavings calculations are based on power consumption while the TV is in active mode only, as requirements for standby power are the same for both baseline and new units. Definition of TermsWbase,active = power use (in Watts) of baseline TV while in active mode (i.e. turned on and operating).WES,active = power use (in Watts) of ENERGY STAR Version 4.1 or 5.1 TV while in active mode (i.e. turned on and operating).HOURSactive = number of hours per day that a typical TV is active (turned on and in use).CF= summer peak coincidence factor.365 = days per year.Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 46 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 45: ENERGY STAR TVs - ReferencesComponentTypeValueSourceCFFixed0.281HOURSactiveFixed52Sources:Deemed Savings Technical Assumptions, Program: ENERGY STAR Retailer Incentive Pilot Program, accessed October 2010, HYPERLINK "" assume TV is in active mode (or turned on) for 5 hours per day and standby mode for 19 hours per day. Based on assumptions from ENERGY STAR Calculator, Life Cycle Cost Estimate for 100 ENERGY STAR Qualified Television(s), accessed October 2010, HYPERLINK "" STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 47 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 46: ENERGY STAR TVs Version 4.1 and 5.1 maximum power consumptionScreen Area (square inches)Maximum Active Power (WES,active)Version 4.1Maximum Active Power (WES,active)Version 5.1A < 275Pmax = 0.190 * A +5Pmax = 0.130 * A +5275 ≤ A ≤ 1068Pmax = 0.120 * A +25Pmax = 0.084 * A +18A > 1068 Pmax = 0.120 * A +25Pmax = 108Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 48 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 47: TV power consumptionDiagonal Screen Size (inches)Baseline Active Power Consumption [Wbase,active]ENERGY STAR V. 4.1 Active Power Consumption [WES,active]ENERGY STAR V. 5.1 Active Power Consumption [WES,active]< 2051231720 < 3085564030 < 40137886240 < 502351299150 < 60 353180108*≥ 60391210108** Pmax = 108WDeemed SavingsDeemed annual energy savings for ENERGY STAR Version 4.1 and 5.1 TVs are given in REF _Ref275251571 \h Table 249Table 248. Coincident demand savings are given in REF _Ref275259972 \h Table 250Table 249. Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 49 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 48: Deemed energy savings for ENERGY STAR Version 4.1 and 5.1 TVs.Diagonal Screen Size (inches)Energy SavingsENERGY STAR V. 4.1 TVs (kWh/year)Energy SavingsENERGY STAR V. 5.1 TVs (kWh/year)< 20516220 < 30548330 < 408913640 < 5019326350 < 60 315446≥ 60331516Table STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 50 STYLEREF 1 \s 2 SEQ Table \* ARABIC \s 1 49: Deemed coincident demand savings for ENERGY STAR Version 4.1 and 5.1 TVs.Diagonal Screen Size (inches)Coincident Demand Savings ENERGY STAR V. 4.1 (kW)Coincident Demand Savings ENERGY STAR V. 5.1 (kW)< 200.0080.00920 < 300.0080.01330 < 400.0140.02140 < 500.0300.04050 < 60 0.0480.068≥ 600.0510.079Measure LifeMeasure life = 15 yearsSources: The average power consumption of units retired under similar recent programs:Fort Collins Utilities, February 2005. Refrigerator and Freezer Recycling Program 2004 Evaluation Report.Midwest Energy Efficiency Alliance, 2005. 2005 Missouri Energy Star Refrigerator Rebate and Recycling Program Final ReportPacific Gas and Electric, 2007. PGE ARP 2006-2008 Climate Change Impacts Model (spreadsheet)Quantec, Aug 2005. Evaluation of the Utah Refrigerator and Freezer Recycling Program (Draft Final Report).CPUC DEER website, HYPERLINK "" PUD, February 2007. 2006 Refrigerator/Freezer Recycling Program Evaluation.Ontario Energy Board, 2006. Total Resource Cost Guide.Applied the kW to kWh ratio derived from Refrigerator savings in the ENERGY STAR Appliances Program.Coincidence factor already embedded in summer peak demand reduction estimatesHome Performance with ENERGY STAR In order to implement Home Performance with Energy Star, there are various standards a program implementer must adhere to in order to deliver the program. The program implementer must use software that meets a national standard for savings calculations from whole-house approaches such as home performance. The software program implementer must adhere to at least one of the following standards:A software tool whose performance has passed testing according to the National Renewable Energy Laboratory’s HERS BESTEST software energy simulation testing protocol.Software approved by the US Department of Energy’s Weatherization Assistance Program.RESNET approved rating software.There are numerous software packages that comply with these standards. Some examples of the software packages are REM/Rate, EnergyGauge, TREAT, and HomeCheck. The HomeCheck software is described below as an example of a software that can be used to determine if a home qualifies for Home Performance with Energy Star.HomeCheck Software ExampleConservation Services Group (CSG) implements Home Performance with Energy Star in several states. CSG has developed proprietary software known as HomeCheck which is designed to enable an energy auditor to collect information about a customer’s site and based on what is found through the energy audit, recommend energy savings measures and demonstrate the costs and savings associated with those recommendations. The HomeCheck software is also used to estimate the energy savings that are reported for this program.CSG has provided a description of the methods and inputs utilized in the HomeCheck software to estimate energy savings. CSG has also provided a copy of an evaluation report prepared by Nexant which assessed the energy savings from participants in the Home Performance with Energy Star Program managed by the New York State Energy Research and Development Authority (NYSERDA). The report concluded that the savings estimated by HomeCheck and reported to NYSERDA were in general agreement with the savings estimates that resulted from the evaluation.These algorithms incorporate the HomeCheck software by reference which will be utilized for estimating energy savings for Home Performance with Energy Star. The following is a summary of the HomeCheck software which was provided by CSG: CSG’s HomeCheck software was designed to streamline the delivery of energy efficiency programs. The software provides the energy efficiency specialist with an easy-to-use guide for data collection, site and HVAC testing algorithms, eligible efficiency measures, and estimated energy savings. The software is designed to enable an auditor to collect information about customers’ sites and then, based on what he/she finds through the audit, recommend energy-saving measures, demonstrate the costs and savings associated with those recommendations. It also enables an auditor/technician to track the delivery of services and installation of measures at a site. This software is a part of an end-to-end solution for delivering high-volume retrofit programs, covering administrative functions such as customer relationship management, inspection scheduling, sub-contractor arranging, invoicing and reporting. The range of existing components of the site that can be assessed for potential upgrades is extensive and incorporates potential modifications to almost all energy using aspects of the home. The incorporation of building shell, equipment, distribution systems, lighting, appliances, diagnostic testing and indoor air quality represents a very broad and comprehensive ability to view the needs of a home. The software is designed to combine two approaches to assessing energy savings opportunities at the site. One is a measure specific energy loss calculation, identifying the change in use of BTU’s achieved by modifying a component of the site. Second, is the correlation between energy savings from various building improvements, and existing energy use patterns at a site. The use of both calculated savings and the analysis of existing energy use patterns, when possible, provides the most accurate prescription of the impact of changes at the site for an existing customer considering improvements on a retrofit basis. This software is not designed to provide a load calculation for new equipment or a HERS rating to compare a site to a standard reference site. It is designed to guide facilities in planning improvements at the site with the goal of improved economics, comfort and safety. The software calculates various economic evaluations such as first year savings, simple payback, measure life cost-effectiveness, and Savings-to-Investment ratio (SIR).Site-Level Parameters and Calculations There are a number of calculations and methodologies that apply across measures and form the basis for calculating savings potentials at a site. Heating Degree Days and Cooling Degree Hours Heat transfer calculations depend fundamentally on the temperature difference between inside and outside temperature. This temperature difference is often summarized on a seasonal basis using fixed heating degree-days (HDD) and cooling degree-hours CDH). The standard reference temperature for calculating HDD (the outside temperature at which the heating system is required), for example, has historically been 65°F. Modern houses have larger internal gains and more efficient thermal building envelopes than houses did when the 65°F standard was developed, leading to lower effective reference temperatures. This fact has been recognized in ASHRAE Fundamentals, which provides a variable-based degree-day method for calculating energy usage. CSG’s Building Model calculates both HDD and CDH based on the specific characteristics and location of the site being treated. Building Loads, Other Parameters, and the Building Model CSG is of the opinion that, in practice, detailed building load simulation tools are quite limited in their potential to improve upon simpler approaches due to their reliance on many factors that are not measurable or known, as well as limitations to the actual models themselves. Key to these limitations is the Human Factor (e.g., sleeping with the windows open; extensive use of high-volume extractor fans, etc.) that is virtually impossible to model. As such, the basic concept behind the model was to develop a series of location specific lookup tables that would take the place of performing hourly calculations while allowing the model to perform for any location. The data in these tables would then be used along with a minimum set of technical data to calculate heating and cooling building loads. In summary, the model uses: Lookup tables for various parameters that contain the following values for each of the 239 TMY2 weather stations: Various heating and cooling infiltration factors. Heating degree days and heating hours for a temperature range of 40 to 72°F. Cooling degree hours and cooling hours for a temperature range of 68 to 84°F. Heating and cooling season solar gain factors. Simple engineering algorithms based on accepted thermodynamic principles, adjusted to reflect known errors, the latest research and measured results Heating season iterative calculations to account for the feedback loop between conditioned hours, degree days, average “system on” indoor and outdoor temperatures and the buildingThe thermal behavior of homes is complex and commonly accepted algorithms will on occasion predict unreasonably high savings, HomeCheck uses a proprietary methodology to identify and adjust these cases. This methodology imposes limits on savings projected by industry standard calculations, to account for interactivities and other factors that are difficult to model. These limits are based on CSG’s measured experience in a wide variety of actual installations.Usage Analysis The estimation of robust building loads through the modeling of a building is not always reliable. Thus, in addition to modeling the building, HomeCheck calculates a normalized annual consumption for heating and cooling, calculated from actual fuel consumption and weather data using a Seasonal Swing methodology. This methodology uses historic local weather data and site-specific usage to calculate heating and cooling loads. The methodology uses 30-year weather data to determine spring and fall shoulder periods when no heating or cooling is likely to be in use. The entered billing history is broken out into daily fuel consumption, and these daily consumption data along with the shoulder periods is used to calculate base load usage and summer and winter seasonal swing fuel consumption. Multiple HVAC Systems HVAC systm and distribution seasonal efficiencies are used in all thermal-shell measure algorithms. HVAC system and distribution seasonal efficiencies and thermostat load reduction adjustments are used when calculating the effect of interactivity between mechanical and architectural measures. If a site has multiple HVAC systems, weighted average seasonal efficiencies and thermostat load reduction adjustments are calculated based on the relative contributions (in terms of percent of total load) of each system. Multiple Heating Fuels It is not unusual to find homes with multiple HVAC systems using different fuel types. In these cases, it is necessary to aggregate the NACs for all fuel sources for use in shell savings algorithms. This is achieved by assigning a percentage contribution to total NAC for each system, converting this into BTU’s, and aggregating the result. Estimated first year savings for thermal shell measures are then disaggregated into the component fuel types based on the pre-retrofit relative contributions of fuel types. InteractivityTo account for interactivity between architectural and mechanical measures, CSG’s HomeCheck employs the following methodology, in order: Noninteracted first year savings are calculated for each individual measure. Non-interacted SIR (RawSIR) is calculated for each measure. Measures are ranked in descending order of RawSIR, Starting with the most cost-effective measure (as defined by RawSIR), first year savings are adjusted for each measure as follows: Mechanical measures (such as thermostats, HVAC system upgrades or distribution system upgrades) are adjusted to account for the load reduction from measures with a higher RawSIR.Architectural measures are adjusted to account for overall HVAC system efficiency changes and thermostat load reduction changes. Architectural measures with a higher RawSIR than that of HVAC system measures are calculated using the existing efficiencies. Those with RawSIR’s lower than that of heating equipment use the new heating efficiencies. Interacted SIR is then calculated for each measure, along with cumulative SIR for the entire job. All measures are then re-ranked in descending order of SIR. The process is repeated, replacing RawSIR with SIR until the order of measures does not change. LightingQuantification of additional savings due to the addition of high efficiency lighting will be based on the applicable algorithms presented for these appliances in the Energy Star Lighting Algorithms section found in Energy Star Products.Table STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 6 STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 6: Energy Star Office Equipment - ReferencesTable STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 7 STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 7: Residential Energy and Demand Savings ValuesTable STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 8 STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 8: Commercial Energy and Demand Savings ValuesTable STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 9 STYLEREF 1 \s 4 SEQ Table \* ARABIC \s 1 9: Effective Useful LifeCommercial and Industrial MeasuresCommercial and Industrial MeasuresBaselines and Code ChangesAll baselines are designed to reflect current market practices which are generally the higher of code or available equipment, that are updated periodically to reflect upgrades in code or information from evaluation results.Pennsylvania has adopted the 2009 International Energy Conservation Code (IECC) per 34 Pa. Code Section 403.21, effective 12/31/09 by reference to the International Building code and the ICC electrical code. This family of codes references ASHRAE 90.1-2007 for minimum energy efficiency standards for commercial and industrial construction projects.Lighting Equipment ImprovementsEligibilityEligible Lighting lighting equipment and fixture/lamp types includes fluorescent fixtures (lamps and ballasts), compact fluorescent lamps, LED exit signs, metal halidehigh intensity discharge (HID) lamps, interior and exterior LED lamps and fixtures, cold-cathode fluorescent lamps (CCFL), induction lamps, and lighting controls. The calculation of energy savings is based on algorithms through the stipulation of key variables (i.e. Coincidence Factor, Interactive Factor and Equivalent Full Load Hours) and through end-use metering referenced in historical studies or measured, as may be required, at the project level.Solid State LightingDue to the immaturity of the SSL market, diversity of product technologies and quality, and current lack of uniform industry standards, it is impossible to point to one source as the complete list of qualifying SSL products for inclusion in Act 129 efficiency programs. A combination of industry-accepted references have been collected to generate minimum criteria for the most complete list of products while not sacrificing quality and legitimacy of savings. The following states the minimum requirements for SSL products that qualify under the TRM:For Act 129 energy efficiency measure savings qualification, for SSL products for which there is an ENERGY STAR commercial product category, the product shall meet the minimum ENERGY STAR requirements for the given product category. Products are not required to be on the ENERGY STAR Qualified Product List, however, if a product is on the list it shall qualify for Act 129 energy efficiency programs and no additional supporting documentation shall be required. ENERGY STAR qualified commercial/non-residential product categories include:Omnidirectional: A, BT, P, PS, S, TDecorative: B, BA, C, CA, DC, F, GDirectional: BR, ER, K, MR, PAR, RNon-standardRecessed, surface and pendant-mounted downlightsUnder-cabinet shelf-mounted task lightingPortable desk task lightsWall wash luminairesBollardsFor SSL products for which there is not an ENERGY STAR commercial product category, but for which there is a DLC commercial product category, the product shall meet the minimum DLC requirements for the given product category. Products are not required to be on the DLC Qualified Product List, however, if a product is on the list it shall qualify for Act 129 energy efficiency programs and no additional supporting documentation shall be required. DLC qualified commercial product categories include:Outdoor Pole or Arm mounted Area and Roadway LuminairesOutdoor Pole or arm mounted Decorative LuminairesOutdoor Wall-Mounted Area LuminairesParking Garage LuminaireTrack or Mono-point Directional Lighting FixturesRefrigerated Case LightingDisplay Case Lighting2x2 LuminaresHigh-bay and Low-bay fixtures for Commercial and Industrial buildingsFor SSL products that are not on either of the listed qualified products lists, they can still be considered for inclusion in Act 129 energy efficiency programs by submitting the following documentation to show compliance with the minimum product category criteria as described above:Manufacturer’s product information sheetLED package/fixture specification sheetList the ENERGY STAR or DLC product category for which the luminaire qualifiesSummary table listing the minimum reference criteria and the corresponding product values for the following variables:Light output in lumensLuminaire efficacy (lm/W)Color rendering index (CRI)Correlated color temperature (CCT)LED lumen maintenance at 6000 hrsManufacturer’s estimated lifetime for L70 (70% lumen maintenance at end of useful life) (manufacturer should provide methodology for calculation and justification of product lifetime estimates)IESNA LM-79-08 test report(s) (from approved labs specified in DOE Manufacturers’ Guide) containing:Photometric measurements (i.e. light output and efficacy)Colorimetry report (i.e. CCT and CRI)Electrical measurements (i.e. input voltage and current, power, power factor, etc.)Lumen maintenance report (select one of the two options and submit all of its corresponding required documents):Option 1: Compliance through component performance (for the corresponding LED package)IESNA LM-80 test reportIn-situ temperature measurements test (ISTMT) report.Schematic/photograph from LED package manufacturer that shows the specified temperature measurement point (TMP)Option 2: Compliance through luminaire performanceIESNA LM-79-08 report at 0 hours (same file as point c)IESNA LM-79-08 report at 6000 hours after continuous operation in the appropriate ANSI/UL 1598 environment (use ANSI/UL 1574 for track lighting systems).All supporting documentation must include a specific, relevant model or part number.For all lighting efficiency improvements, with and without control improvements, the following algorithms apply:AlgorithmsFor all lighting efficiency improvements, with and without control improvements, the following algorithms apply:kW = kWbase - kWinstkWeekWpeakDemand Savings (kW) = kW X CF X (1+IF demand) kWhEnergy Savings = [kWbase X(1+IF energy) X EFLH] – [kWinst kWee X(1+IF energy) X EFLH X (1 – SVG)]Where:Definition of TermskW = Change in connected load from baseline (pre-retrofit) to installed (post-retrofit) lighting level. kWbase = kW of baseline lighting as defined by project classification in Section 6.2.3.kWinst kWee= kW of of post-retrofit or energy-efficient lighting system as defined in Section 5installed lighting.CF = Demand Coincidence Factor – the percentage of the total lighting connected load that is on during electric system’s peak window as defined in Section 1.9Section 1- Electric Resource Savings. EFLH = Equivalent Full Load Hours – the average annual operating hours of the baseline lighting equipment, which if applied to full connected load will yield annual energy use.IF demand = Interactive HVAC Demand Factor – applies to C&I interior lighting in space that has air conditioning or refrigeration only. This represents the secondary demand savings in cooling required which results from decreased indoor lighting wattage. IF energy = Interactive HVAC Energy Factor – applies to C&I interior lighting in space that has air conditioning or refrigeration only. This represents the secondary energy savings in cooling required which results from decreased indoor lighting wattage.SVG = The percent of time that lights are off due to lighting controls relative to the baseline controls system (typically manual switch).Baseline AssumptionsThe baseline assumptions will be adjusted from program year one to program year two. This adjustment will take into account standard building practices in order to estimate savings more accurately.The following are acceptable methods for determining baseline conditions when verification by direct inspection is not possible as may occur in a rebate program where customers submit an application and equipment receipts only after installing efficient lighting equipment, or for a retroactive project as allowed by Act 129. In order of preference:Examination of replaced lighting equipment that is still on site waiting to be recycled or otherwise disposed of.Examination of replacement lamp and ballast inventories where the customer has replacement equipment for the retrofitted fixtures in stock. The inventory must be under the control of the customer or customer’s agent.? Interviews with and written statements from customers, facility managers, building engineers or others with firsthand knowledge about purchasing and operating practices at the affected site(s) identifying the lamp and ballast configuration(s) of the baseline condition.? Interviews with and written statements from the project’s lighting contractor or the customer’s project coordinator identifying the lamp and ballast configuration(s) of the baseline equipmentProgram Year OneFor new construction and building additions (not comprehensive retrofit projects), savings are calculated using assumptions that presume a decision to upgrade the lighting system from a baseline industry standard system, defined as the most efficient T-12 lamp and magnetic ballast.For retrofit projects, the most efficient T12 fixture, with T12 lampa magnetic and magnetic ballast ballast and the same number of bulbs as the retrofit fixture, fixture serves as the baseline for most T8 fixture installations. Where T5 and T8 fixtures replace HID fixtures, ≥250 watt or greater T12 fluorescent fixtures, or ≥ 250 watt or greater incandescent fixtures, savings are calculated referencing pre-existing connected lighting load.Program Year TwoFor new construction and facility renovation projects, savings are calculated as described in Section Section REF _Ref276389728 \r \h 3.2.7, REF _Ref248729259 \h New Construction and Building Additions “New Construction and Building Additions” 6.2.6.1 below.For retrofit projects, the calculation method described below in Sectionselect the appropriate method from the “Calculation Method Description” sSection REF _Ref276389728 \r \h 3.2.7, REF _Ref276389728 \h Calculation Method Descriptions By Project Classification described below. 6.2.6.3 and Section 6.2.6.4 will be followed.Detailed Inventory FormFor lighting improvement projects, savings are generally proportional to the number of fixtures installed or replaced. The method of savings verification will vary depending on the size of the project because fixtures can be hand-counted to a reasonable degree to a limit. Projects with connected load savings less than 20 kW of connected load savings less than 20 kW of savings For projects having less than 20kW in connected load savings, a detailed inventory is not required but information sufficient to validate savings according to the algorithm above must be included in the documentation. This includes identification of baseline equipment utilized for quantifying kW base. A prescriptive lighting table has been included in Appendix C contains a prescriptive lighting table, which can be utilized to estimate savings for small, simple projects under 20kW in savings provided that the user self-certifies the baseline condition.Projects with connected load savings of 20 kW or higher of connected load savings For projects having a connected load savings of 20 kW or higher, a detailed inventory is required. Using the above algorithmsenergy and demand savings algorithms in Section 5.2 “Algorithms”, kW values will be multiplied by the number of fixtures installed. The total kW savings is derived by summing the total kW for each installed measure.Within a singleIn the same project, to the extent there are different control strategies (SVG), hours of use (EFLH), coincidence factors (CF) or interactive factors (IF), the kW will be broken out to account for these different factors. This will be accomplished using Appendix C, an Microsoft Excel inventory form in Excel format that specifies the lamp and ballast configuration using the Expanded Prescriptive LightingStandard Wattage table Table and SVG, EFLH, CF and IF values for the each line entry. The inventory will also specify the location and number of fixtures for reference and validation. A sample of the inventory format incorporating the algorithms for savings calculation and the Lighting Audit and Design Tool are included in Appendix C.Appendix C was developed to automate the calculation of energy and demand impacts for retrofit lighting projects, based on a series of entries by the user defining key characteristics of the retrofit project. The main sheet, “Lighting Form”, is a detailed line-by-line inventory incorporating variables in Section 6.2.1. Each line item represents a specific area with common baseline fixtures, retrofit fixtures, controls strategy, space cooling, and space usage.Baseline and retrofit fixture wattages are determined by selecting the appropriate fixture code from the “Wattage Table” sheet. The “Fixture Code Locator” sheet can be used to find the appropriate code for a particular lamp-ballast combination. Actual wattages of fixtures determined by manufacturer’s equipment specification sheets or other independent sources may not be used unless (1) the wattage differs from the Standard Wattage Table referenced wattage by more than 10% or (2) the corresponding fixture code is not listed in the Standard Wattage Table. In these cases, alternate wattages for lamp-ballast combinations can be inputted using the “User Input” sheet of Appendix C. Documentation supporting the alternate wattages must be provided in the form of manufacturer provided specification sheets or other industry accepted sources (e.g. ENERGY STAR listing, Design Lights Consortium listing). It must cite test data performed under standard ANSI procedures. These exceptions will be used as the basis for periodically updating the Standard Wattage Table to better reflect market conditions and more accurately represent savings.Some lighting contractors may have developed in-house lighting inventory forms that are used to determine preliminary estimates of projects. In order to ensure standardization of all lighting projects, Appendix C must still be used. However, if a third-party lighting inventory form is provided, entries to Appendix C may be condensed into groups sharing common baseline fixtures, retrofit fixtures, space type, building type, and controls. Whereas Appendix C separates fixtures by location to facilitate evaluation and audit activities, third-party forms can serve that specific function if provided.The Lighting Audit and Design ToolAppendix C will be updated periodically to include new fixtures and technologies available as may be appropriate. Additional guidance can be found in the “Manual” sheet of Appendix C.Quantifying Annual Hours of OperationProjects with large impacts will typically include whole building lighting improvements in varying space types, which in turn may have different operating hours. Project specific EFLH will be determined by the following thresholds: Projects with connected load savings less than 50kW of connected load savingsFor lighting projects with savings less than 50 kW, stipulated whole building hours of use will be used as shown below in REF _Ref275549503 \h Table 34.Projects with connected load savings of 50kW or higher of connected load savingsFor projects with connected load savings of 50 kW or higher, additional detail is required. For large projects, the likelihood that all fixtures do not behave uniformly is high. Therefore, the project must be separated into "usage groups", or groups of fixtures exhibiting similar usage patterns. The number of usage groups required is determined by facility type per REF _Ref275549493 \h Table 31. EFLH values must be estimated for each group by facility interviews supplemented by either logging or stipulated values from REF _Ref275549494 \h Table 3232.For lighting projects with savings equal to or greater than 50kW, hours of use will be estimated for the Hours of Use Groups specified in Table 56-1, using a combination of facility interviews, prescriptive tables (to be developed by the SWE in conjunction with the TWG), or logging. Interviews alone are not sufficient because results from interviews along could be subject to adjustment by evaluators. Allocations of light fixtures or lamp and ballast retrofits to Hours of Use Groups are made on the Lighting Audit and Design Tool shown in Appendix C.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 1 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 1: Hours of Use Groups Required per Building TypeBuilding TypeMinimum Number of Usage GroupsExamples of Usage Group typesOffice Buildings6General offices, private offices, hallways, restrooms, conference, lobbies, 24-hrEducation (K-12)6Classrooms, offices, hallways, restrooms, admin, auditorium, gymnasium, 24-hrEducation (College/University)6Classrooms, offices, hallways, restrooms, admin, auditorium, library, dormitory, 24-hrHospitals/ Health Care Facilities8Patient rooms, operating rooms, nurses station, exam rooms, labs, offices, hallwaysRetail Stores5Sales floor, storeroom, displays, private office, 24-hrIndustrial/ Manufacturing6Manufacturing, warehouse, shipping, offices, shops, 24-hrOtherVariableAll major usage groups within buildingTo the extent that retrofits are not comprehensive, are narrow and focused for usage groups, and are not the typical diversity in retrofit projects, the implementer can use fewer usage groups that reflect the actual diversity of use.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 2 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 2 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 2: Hours of Use for Usage GroupsBuilding TypeUsage GroupEquivalent Full Load HoursEducation - Primary School Classroom/Lecture 2445Education - Primary School Exercising Centers and Gymnasium 2051Education - Primary School Dining Area1347Education - Primary School Kitchen and Food Preparation1669Education - Secondary School Classroom/Lecture 2445Education - Secondary School Office (General) 2323Education - Secondary School Exercising Centers and Gymnasium2366Education - Secondary School Computer Room (Instructional/PC Lab) 2137Education - Secondary School Dining Area2365Education - Secondary School Kitchen and Food Preparation 1168Education - Community College Classroom/Lecture 2471Education - Community College Office (General) 2629Education - Community College Computer Room (Instructional/PC Lab) 2189Education - Community College Comm/Ind Work (General, Low Bay) 3078Education - Community College Dining Area 2580Education - Community College Kitchen and Food Preparation 2957Education - University Classroom/Lecture 2522Education - University Office (General) 2870Education - University Computer Room (Instructional/PC Lab) 2372Education - University Comm/Ind Work (General, Low Bay) 3099Education - University Dining Area 2963Education - University Kitchen and Food Preparation 3072Education - University Hotel/Motel Guest Room (incl. toilets) 1196Education - University Corridor 2972Grocery Retail Sales, Grocery 4964Grocery Office (General) 4526Grocery Comm/Ind Work (Loading Dock) 4964Grocery Refrigerated (Food Preparation) 4380Grocery Refrigerated (Walk-in Freezer) 4380Grocery Refrigerated (Walk-in Cooler) 4380HospitalsOffice (General) 4873HospitalsDining Area 5858HospitalsKitchen and Food Preparation 5858HospitalsMedical and Clinical Care 5193HospitalsLaboratory, Medical 4257HospitalsMedical and Clinical Care 5193Lodging - Hotel Hotel/Motel Guest Room (incl. toilets) 799Lodging - Hotel Corridor 7884Lodging - Hotel Dining Area 3485Lodging - Hotel Kitchen and Food Preparation 4524Lodging - Hotel Bar, Cocktail Lounge 3820Lodging - Hotel Lobby (Hotel) 7884Lodging - Hotel Laundry 4154Lodging - Hotel Office (General) 3317Lodging - Motel Hotel/Motel Guest Room (incl. toilets)755Lodging - Motel Office (General) 5858Lodging - Motel Laundry 4709Lodging - Motel Corridor 7474Manufacturing - Light Industrial Comm/Ind Work (General, High Bay) 3068Manufacturing - Light Industrial Storage (Unconditioned) 3376Office - Large Office (Open Plan) 2641Office - Large Office (Executive/Private) 2641Office - Large Corridor 2641Office - Large Lobby (Office Reception/Waiting) 2692Office - Large Conference Room 2692Office - Large Copy Room (photocopying equipment) 2692Office - Large Restrooms 2692Office - Large Mechanical/Electrical Room 2692Office - Small Office (Executive/Private) 2594Office - Small Corridor 2594Office - Small Lobby (Office Reception/Waiting) 2594Office - Small Conference Room 2594Office - Small Copy Room (photocopying equipment) 2594Office - Small Restrooms 2594Office - Small Mechanical/Electrical Room 2594Restaurant - Sit-Down Dining Area 4836Restaurant - Sit-Down Lobby (Main Entry and Assembly) 4836Restaurant - Sit-Down Kitchen and Food Preparation 4804Restaurant - Sit-Down Restrooms 4606Restaurant - Fast-Food Dining Area 4850Restaurant - Fast-FoodLobby (Main Entry and Assembly) 4850Restaurant - Fast-Food Kitchen and Food Preparation 4812Restaurant - Fast-Food Restrooms 4677Retail - 3-Story Large Retail Sales and Wholesale Showroom 3546Retail - 3-Story Large Storage (Conditioned) 2702Retail - 3-Story Large Office (General) 2596Retail - Single-Story Large Retail Sales and Wholesale Showroom 4454Retail - Single-Story Large Storage (Conditioned) 2738Retail - Single-Story Large Office (General) 2714Retail - Single-Story Large Auto Repair Workshop 3429Retail - Single-Story Large Kitchen and Food Preparation 3368Retail - Small Retail Sales and Wholesale Showroom 3378Retail - Small Storage (Conditioned) 2753Storage - Conditioned Storage (Conditioned) 3441Storage - Conditioned Office (General) 3441Storage - Unconditioned Storage (Unconditioned) 3441Storage - Unconditioned Office (General)3441Description of Calculation Method by Project TypeCalculation Method Descriptions (By Project Classification)New Construction and Building AdditionsFor new construction and building addition projects, savings are calculated using ASHRAE 90.1-2007 as the baseline (kWbase) and the new wattages and fixtures as the post-installation wattage. The existing baseline, pursuant to ASHRAE 90.1-2007, can be calculated using either the ASHRAE 90.1-2007 Building Area Method as is shown in REF _Ref247603894 \h \* MERGEFORMAT Table 34 REF _Ref275880625 \h Table 33 below, or the ASHRAE 90.1-2007 Space-by-Space Method as shown in REF _Ref275549503 \h Table 34 below. and tThe new fixture wattages are specified in the Lighting Audit and Design Tool shown in Appendix C.EFLH, CF and IF values are the same as those shown in REF _Ref261522860 \h \* MERGEFORMAT Table 506 REF _Ref275556521 \h \* MERGEFORMAT Table 35 and REF _Ref275879784 \h \* MERGEFORMAT Table 36Table 3–3 and REF _Ref261522869 \h \* MERGEFORMAT Table 507. REF _Ref275446447 \h Table 34.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 3 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 3: ASHRAE 90.1-2007 Building Area MethodBuilding Area TypeLPD (W/ft2)Building Area TypeLPD (W/ft2)Automotive facility0.9Multifamily0.7Convention center1.2Museum1.1Courthouse1.2Office1.0Dining: bar lounge/leisure1.3Parking garage0.3Dining: cafeteria/fast food1.4Penitentiary1.0Dining: family1.6Performing arts theater1.6Dormitory1.0Police/fire station1.0Exercise center1.0Post office1.1Gymnasium1.1Religious building1.3Health-care clinic1.0Retail1.5Hospital1.2School/university0.2Hotel1.0Sports arena1.1Library.3Town hall1.1Manufacturing facility1.3Transportation1.0Motel1.0Warehouse0.8Motion picture theater1.2Workshop1.4Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 4 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 4 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 4 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 2: ASHRAE 90.1-20074 Space-by-Space MethodLighting Baseline for New Construction and Building AdditionsCommon Space TypeLPD (W/ft2)Building Specific Space TypesLPD (W/ft2)Office-Enclosed1.1Gymnasium/Exercise Center?Office-Open Plan1.1Playing Area1.4Conference/Meeting/Multipurpose1.3Exercise Area0.9Classroom/Lecture/Training1.4Courthouse/Police Station/Penitentiary?For Penitentiary1.3Courtroom1.9Lobby1.3Confinement Cells0.9For Hotel1.1Judges Chambers1.3For Performing Arts Theater3.3Fire Stations?For Motion Picture Theater1.1Fire Station Engine Room0.8Audience/Seating Area0.9Sleeping Quarters0.3For Gymnasium0.4Post Office-Sorting Area1.2For Exercise Center0.3Convention Center-Exhibit Space1.3For Convention Center0.7Library?For Penitentiary0.7Card File and Cataloging1.1For Religious Buildings1.7Stacks1.7For Sports Arena0.4Reading Area1.2For Performing Arts Theater2.6Hospital?For Motion Picture Theater1.2Emergency2.7For Transportation0.5Recovery0.8Atrium—First Three Floors0.6Nurse Station1.0Atrium—Each Additional Floor0.2Exam/Treatment1.5Lounge/Recreation1.2Pharmacy1.2For Hospital0.8Patient Room0.7Dining Area0.9Operating Room2.2For Penitentiary1.3Nursery0.6For Hotel1.3Medical Supply1.4For Motel1.2Physical Therapy0.9For Bar Lounge/Leisure Dining1.4Radiology0.4For Family Dining2.1Laundry—Washing0.6Food Preparation1.2Automotive—Service/Repair0.7Laboratory1.4Manufacturing?Restrooms0.9Low (<25 ft Floor to Ceiling Height)1.2Dressing/Locker/Fitting Room0.6High (>25 ft Floor to Ceiling Height)1.7Corridor/Transition0.5Detailed Manufacturing2.1For Hospital1.0Equipment Room1.2For Manufacturing Facility0.5Control Room0.5Stairs—Active0.6Hotel/Motel Guest Rooms1.1Active Storage0.8Dormitory—Living Quarters1.1For Hospital0.9Museum?Inactive Storage0.3General Exhibition1.0For Museum0.8Restoration1.7Electrical/Mechanical1.5Bank/Office—Banking Activity Area1.5Workshop1.9Religious Buildings??Sales Area1.7Worship Pulpit, Choir2.4??Fellowship Hall0.9??Retail [For accent lighting, see 9.3.1.2.1(c)]???Sales Area1.7??Mall Concourse1.7??Sports Arena???Ring Sports Area2.7??Court Sports Area2.3??Indoor Playing Field Area1.4??Warehouse???Fine Material Storage1.4??Medium/Bulky Material Storage0.9??Parking Garage—Garage Area0.2??Transportation???Airport—Concourse0.6??Air/Train/Bus—Baggage Area1.0??Terminal—Ticket Counter1.5Traffic Signal Lighting ImprovementsTraffic signal lighting improvements use the lighting algorithms with the assumptions set forth in REF _Ref247604418 \h \* MERGEFORMAT Table 503 and REF _Ref247604422 \h \* MERGEFORMAT Table 504.Table STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 3: Assumptions for Lighting Algorithm Relative to Traffic Signal ImprovementsComponentTypeValueSourcekWVariableSee REF _Ref247604422 \h \* MERGEFORMAT Table 04PECoCFRed Round55%PECoYellow Round2%Round Green43%Turn Yellow8%Turn Green8%Pedestrian100%EFLHVariableSee REF _Ref247604422 \h \* MERGEFORMAT Table 04PECoIFFixed0Table STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 4: Traffic SignalsTypeWattage% BurnEFLHkWhkW using LEDkWh using LEDRound Traffic SignalsRed 8"6955%4,818332--Red 8" LED755%4,818340.062299Yellow 8"692%17512--Yellow 8" LED102%17520.05910Green 8"6943%3,767260--Green 8" LED943%3,767340.060226Red 12"15055%4,818723--Red 12" LED655%4,818290.144694Yellow 12"1502%17526--Yellow 12" LED132%17520.13724Green 12"15043%3,767565--Green 12" LED1243%3,767450.138520Turn ArrowsYellow 8"1168%70181--Yellow 8" LED78%70150.10976Yellow 12"1168%70181--Yellow 12" LED98%70160.10775Green 8"1168%70181--Green 8" LED78%70150.10976Green 12"1168%70181--Green 12" LED78%70150.10976Pedestrian SignsHand/Man 12"116100%8,7601,016--Hand/Man 12" LED8100%8,760700.108946Note: Energy Savings (kWh) are Annual & Demand Savings (kW) listed are per lamp.Table STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 5: Reference Specifications for Above Traffic Signal WattagesTypeManufacturer & Model8” Incandescent traffic signal bulbGeneral Electric Traffic Signal Model 17325-69A21/TS12” Incandescent traffic signal bulbGeneral Electric Traffic Signal Model 35327-150PAR46/TSIncandescent Arrows & Hand/Man Pedestrian SignsGeneral Electric Traffic Signal Model 19010-116A21/TS8” and 12” LED traffic signalsLeotek Models TSL-ES08 and TSL-ES128” LED Yellow ArrowGeneral Electric Model DR4-YTA2-01A8” LED Green ArrowGeneral Electric Model DR4-GCA2-01A12” LED Yellow ArrowDialight Model 431-3334-001X12" LED Green ArrowDialight Model 432-2324-001XLED Hand/Man Pedestrian SignDialight Model 430-6450-001XPrescriptive Lighting ImprovementsPrescriptive Lighting Improvements include fixture or lamp and ballast replacement in existing commercial and industrial customers’ facilities. The baseline is the existing fluorescent fixtures with the existing lamps and ballast as defined in Lighting Audit and Design Tool shown in Appendix C. Other factors required to calculate savings are shown in REF _Ref275556521 \h \* MERGEFORMAT Table 35 and REF _Ref275879784 \h \* MERGEFORMAT Table 36 REF _Ref261522860 \h \* MERGEFORMAT Table 506Table 3–3 and REF _Ref261522869 \h \* MERGEFORMAT Table 507 REF _Ref275549503 \h \* MERGEFORMAT Table 34. Note that if run hoursEFLH areis stated and verified by logging lighting hours of use groupings, actual hours should be applied. The IF factors shown in REF _Ref261522869 \h \* MERGEFORMAT Table 507 REF _Ref275556521 \h Table 35 REF _Ref275879784 \h \* MERGEFORMAT Table 36 are to be used only when the facilities are air conditioned and only for fixtures in conditioned or refrigerated space. The EFLH for refrigerated spaces are to be estimated or logged separately.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 5 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 5: Lighting EFLH and CF by Building Type or FunctionBuilding TypeEFLHCFSourceDaycare2,5900.77*6Education – Primary School1,4400.571Education – Secondary School2,3050.571Education – Community College3,7920.641Education – University3,0730.641Grocery5,8240.941All Hospitals6,5880.841Industrial Manufacturing – 1 Shift2,8570.77*4Industrial Manufacturing – 2 Shift4,7300.77*4Industrial Manufacturing – 3 Shift6,6310.77*4Medical – Clinic4,2120.861Libraries2,5660.77*2Lodging – Hotel Guest Rooms1,1450.841Lodging – Motel Common Spaces8,7361.001Light Manufacturing (Assy)2,6100.77*5Manufacturing – Light Industrial4,2900.631Office- Large2,8080.841Office-Small2,8080.841Parking Garages6,5520.77*4Police and Fire Station – 24 Hour7,6650.77*8Police and Fire Station – Unmanned1,9530.77*8Public Order and Safety5,3660.77*7Religious Worship1,8100.77*3, 4Restaurant – Sit-Down4,3680.881Restaurant – Fast-Food6,1880.881Retail – 3-Story Large4,2590.891Retail – Single-Story Large4,3680.891Retail – Small4,0040.891Storage Conditioned 4,2900.851Storage Unconditioned4,2900.851Warehouse3,9000.851Dusk-to-Dawn Lighting4,3000.001OtherAs MeasuredAs Measured1* Coincidence Factors were not agreed upon prior to release of this document in October 2010. 0.77 represents the simple average of all existing coincidence factors (16.19 divided by 21).Sources:New Jersey’s Clean Energy Program Protocols, November 2009California Public Utility Commission. Database for Energy Efficiency Resources, 2005RLW Analytics, Coincident Factor Study, Residential and Commercial & Industrial Lighting Measures, 2007.Quantum Consulting, Inc., for Pacific Gas & Electric Company , Evaluation of Pacific Gas & Electric Company’s 1997 Commercial Energy Efficiency Incentives Program: Lighting Technologies”, March 1, 1999KEMA. New Jersey’s Clean Energy Program Energy Impact Evaluation and Protocol Review. 2009.Southern California Edison Company, Design & Engineering Services, Work Paper WPSCNRMI0054, Revision 0, September 17, 2007, Ventura County Partnership Program, Fillmore Public Library (Ventura County); Two 8-Foot T8 Lamp and Electronic Ballast to Four 4-Foot T8 Lamps and Premium Electronic Ballast. Reference: "The Los Angeles County building study was used to determine the lighting operating hours for this work paper. At Case Site #19A (L.A. County Montebello Public Library), the lights were at full load during work hours, and at zero load during non-work hours. This and the L.A. County Claremont Library (also referenced in the Los Angeles County building study) are small libraries branches similar to those of this work paper’s library (Ventura County’s Fillmore Library). As such, the three locations have the same lighting profile. Therefore, the lighting operating hour value of 1,664 hours/year stated above is reasonably accurate." Duquesne Light customer data on 29 libraries (SIC 8231) reflects an average load factor 26.4% equivalent to 2285 hours per year. Connecticut Light and Power and United Illuminating Company (CL&P and UI) program savings documentation for 2008 Program Year Table 2.0.0 C&I Hours, page 246 - Libraries 3,748 hours. An average of the three references is 2,566 hours.DOE 2003 Commercial Building Energy Survey (CBECS), Table B1. Summary Table: Total and Means of Floorspace, Number of Workers, and Hours of Operation for Non-Mall Buildings, Released: June 2006 - 32 Mean Hours per Week for 370,000 Building Type: "Religious Worship" - 32 X 52 weeks = 1,664 hour per year.CL&P and UI 2008 program documentation (referenced above) cites an estimated 4,368 hours, only 68 hours greater than dusk to down operating hours. ESNA RP-20-98; Lighting for Parking Facilities acknowledges "Garages usually require supplemental daytime luminance in above-ground facilities, and full day and night lighting for underground facilities." Emphasis added. The adopted assumption of 6,552 increases the CL&P and UI value by 50% (suggest data logging to document greater hours i.e., 8760 hours per year).2008 DEER Update – Summary of Measure Energy Analysis Revisions, August, 2008; available at HYPERLINK "" Analysis of 3-"Kinder Care" daycare centers serving 150-160 children per day - average 9,175 ft2; 4.9 Watts per ft2; load factor 23.1% estimate 2,208 hours per year. Given an operating assumption of five days per week, 12 hours per day (6:00AM to 6:00 PM) closed weekends (260 days); Closed on 6 NERC holidays that fall on weekdays (2002, 2008 and 2013) deduct 144 hours: (260 X 12)-144 = 2,976 hours per year; assumption adopts an average of measured and operational bases or 2,592 hours per year.DOE 2003 Commercial Building Energy Survey (CBECS), Table B1. Summary Table: Total and Means of Floorspace, Number of Workers, and Hours of Operation for Non-Mall Buildings, Released: June 2006 - 103 Mean Hours per Week for 71,000 Building Type: "Public Order and Safety" - 32 X 52 weeks = 5,366 hour per year.Police and Fire Station operating hour data taken from the CL&P and UI 2008 program documentation (referenced above).Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 6 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 6 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 6 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 7: Interactive Factors and Other Lighting VariablesComponentTypeValueSourceIFdemandFixedCooled space = 0.341Freezer spaces = 0.5 0Medium-temperature refrigerated spaces = 0.29High-temperature refrigerated spaces = 0.18Uncooled space = 0IFenergyFixedCooled space = 0.121Freezer spaces = 0.50Medium-temperature refrigerated spaces = 0.29High-temperature refrigerated spaces = 0.18Uncooled space = 0kWbase VariableLighting Audit and Design ToolSee Standard Wattage Table in Appendix C2kWinstVariableSee Standard Wattage Table in Appendix CLighting Audit and Design Tool in Appendix C2Sources:PA TRM, Efficiency Vermont. Technical Reference User Manual: Measure Savings Algorithms and Cost Assumptions (July 2008).NYSERDA Table of Standard Wattages (November 2009)Lighting Control AdjustmentssLighting controls include HID controls, daylight dimmer systems, occupancy sensors, and occupancy controlled hi-low controls for fluorescent fixtures. The measurement of energy savings is based on algorithms with key variables (e.g. coincidence factor, equivalent full load hours) provided through existing end-use metering of a sample of facilities or from other utility programs with experience with these measures (i.e., % of annual lighting energy saved by lighting control). These key variables are listed in REF _Ref261522952 \h \* MERGEFORMAT Table 508 REF _Ref275549498 \h Table 37.If a lighting improvement consists of solely lighting controls, the lighting fixture baseline is the existing fluorescent fixtures with the existing lamps and ballasts or, if retrofitted, new fluorescent fixtures with new lamps and ballasts as defined in Lighting Audit and Design Tool shown in Appendix C. In either case, the kWinst for the purpose of the algorithm is set to kWbase.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 7 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 7 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 7 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 8: Lighting Controls AssumptionsComponentTypeValueSourcekWbase VariableLighting Audit and Design Tool in Appendix C1kWinstVariableLighting Audit and Design Tool in Appendix C1SVGFixedOccupancy Sensor, Controlled Hi-Low Fluorescent Control and controlled HID = 30%2 and 3Daylight Dimmer System=50%CFVariableBy building type and size See REF _Ref275556521 \h \* MERGEFORMAT Table 35 REF _Ref261522860 \h \* MERGEFORMAT Table 06Table 3–5EFLHVariableBy building type and size See REF _Ref275556521 \h \* MERGEFORMAT Table 35 REF _Ref261522860 \h \* MERGEFORMAT Table 06Table 3–5IFVariableBy building type and size See REF _Ref261522860 \h \* MERGEFORMAT Table 06 REF _Ref275556722 \h Table 36Sources:NYSERDA Table of Standard WattagesLevine, M., Geller, H., Koomey, J., Nadel S., Price, L., "Electricity Energy Use Efficiency: Experience with Technologies, Markets and Policies” ACEEE, 1992Lighting control savings fractions consistent with current programs offered by National Grid, Northeast Utilities, Long Island Power Authority, NYSERDA, and Energy Efficient Vermont.LED Traffic Signals Traffic signal lighting improvements use the lighting algorithms with the assumptions set forth in REF _Ref275549495 \h Table 38 andbelow REF _Ref275549496 \h Table 312.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 8: Assumptions for LED Traffic SignalsTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 8: Assumptions for LED Traffic SignalsComponentTypeValueSourcekWVariableSee REF _Ref247604422 \h \* MERGEFORMAT 7PECoCFRed Round55%PECoYellow Round2%Round Green43%Turn Yellow8%Turn Green8%Pedestrian100%EFLHVariableSee REF _Ref247604422 \h \* MERGEFORMAT 7PECoIFFixed0Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 9: LED Traffic SignalsTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 9: LED Traffic SignalsTypeWattage% BurnEFLHkWhkW using LEDkWh using LEDRound Traffic SignalsRed 8"6955%4,818332--Red 8" LED755%4,818340.062299Yellow 8"692%17512--Yellow 8" LED102%17520.05910Green 8"6943%3,767260--Green 8" LED943%3,767340.060226Red 12"15055%4,818723--Red 12" LED655%4,818290.144694Yellow 12"1502%17526--Yellow 12" LED132%17520.13724Green 12"15043%3,767565--Green 12" LED1243%3,767450.138520Turn ArrowsYellow 8"1168%70181--Yellow 8" LED78%70150.10976Yellow 12"1168%70181--Yellow 12" LED98%70160.10775Green 8"1168%70181--Green 8" LED78%70150.10976Green 12"1168%70181--Green 12" LED78%70150.10976Pedestrian SignsHand/Man 12"116100%8,7601,016--Hand/Man 12" LED8100%8,760700.108946Note: Energy Savings (kWh) are Annual & Demand Savings (kW) listed are per lamp.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 10 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 10: Reference Specifications for Above Traffic Signal WattagesTypeManufacturer & Model8” Incandescent traffic signal bulbGeneral Electric Traffic Signal Model 17325-69A21/TS12” Incandescent traffic signal bulbGeneral Electric Traffic Signal Model 35327-150PAR46/TSIncandescent Arrows & Hand/Man Pedestrian SignsGeneral Electric Traffic Signal Model 19010-116A21/TS8” and 12” LED traffic signalsLeotek Models TSL-ES08 and TSL-ES128” LED Yellow ArrowGeneral Electric Model DR4-YTA2-01A8” LED Green ArrowGeneral Electric Model DR4-GCA2-01A12” LED Yellow ArrowDialight Model 431-3334-001X12" LED Green ArrowDialight Model 432-2324-001XLED Hand/Man Pedestrian SignDialight Model 430-6450-001XLED Exit SignsThis measure includes the early replacement of existing incandescent or fluorescent exit signs with a new LED exit sign. The deemed savings for this measure are:kWh= 332 kWhkWpeak= 0.041 kWThe savings are calculated using the lighting algorithms in Section 3.2.2 with assumptions in Table 311Table 311.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 11 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 11: LED Exit SignsComponentTypeValueSourcekWbase Fixed0.0371kWinstFixed0.00292CFFixed1.03EFLHFixed87603IFenergyFixed0.114IFdemandFixed0.214Sources:kWbase assumes 90% of existing exit signs are incandescent and 10% fluorescent with average sign wattages of 40W and 11W respectively. Weighted average existing exit sign wattage = 0.9*40W+0.1*11W = 37.1W. Assumptions are from WI Focus on Energy, “Business Programs: Deemed Savings Manual V1.0.” Update Date: March 22, 2010.Average wattage of LED exit signs per WI Focus on Energy, “Business Programs: Deemed Savings Manual V1.0.” Update Date: March 22, 2010.WI Focus on Energy, “Business Programs: Deemed Savings Manual V1.0.” Update Date: March 22, 2010. LED Exit Sign.Mid-Atlantic Technical Reference Manual V1.0. May 2010. LED Exit Sign.Premium Efficiency MotorsFor constant speed and uniformly loaded motors with commercial and industrialused in commercial and industrial buildings applications described in XX, the prescriptive measurement and verification protocols described below apply for replacement of old motors with new energy efficient motors of the same rated horsepower. Replacements where the old motor and new motor have different horsepower ratings are considered custom measures. For motors with variable speeds, variable loading, or industrial-specific applications, Custom Measure Protocols and Measurement and Verification Plans are required. Note that the Coincidence Factor and Run Hours of Use for motors specified below do not take into account systems with multiple motors serving the same load, such as duplex motor sets with a lead-lag setupone motor in a lead and the other in back up mode. Under these circumstances, the Coincidence Factor (CF) and Run Hours of Use (RHRS) will need to be adjusted accordingly based on the proposed loading of the new motora custom measure protocol is required. Duplex motor sets in which the second motor serves as a standby motor can utilize this protocol with an adjustment made such that savings are correctly attributed to a single motor. AlgorithmsFrom AEPS application form or EDC data gathering calculate kW where:kW = 0.746 X HP X (1/ηbase –1/ηee) X LFkWpeak= kW X CFkWhEnergy Savings (kWh) = (kW) X RHRS Demand Savings (kW) = (kW) X CFDefinition of VariablesHP = Rated horsepower of the baseline motor and energy efficient motorLF = Load Factor. Ratio of the average operating load to the nameplate rating of the baseline motor or, if installed, an existing energy efficient motorηbase = Efficiency of the baseline motorηee = Efficiency of the energy-efficient motorRHRS = Annual run hours of the motorCF = Demand Coincidence Factor. The percentage of the connected load that is on during electric system’s peak window as defined in Section 1- Electric Resource Savings.Section 1.9.Description of Calculation MethodRelative to the above algorithm, kW values will be calculated for each motor improvement in any project (account number). Each motor and the respective variables required to calculate the demand and energy savings for that motor will be entered into an inventory in Excel format, the Motor & Variable Frequency Drive (VFD) Inventory Form. The inventory will also specify the location for reference and validation. A sample of the Motor & VFD Inventory Form incorporating the algorithms for savings calculation is included in Appendix D.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 12 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 12 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 8 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 9: Building Mechanical System Variables for Premium Efficiency Motor CalculationsComponentTypeValueSourceMotor HPVariableNameplate (pre and post same)EDC Data GatheringRHRSVariableBased on logging and modelingEDC Data Gathering Default REF _Ref275556522 \h Table 315 REF _Ref248813884 \h \* MERGEFORMAT Error! Reference source not found.See table referencesFrom REF _Ref275556522 \h Table 315LFVariableBased on spot metering/ nameplateEDC Data GatheringDefault 75%1Efficiency – ηbaseVariableEarly Replacement: Nameplate EDC Data GatheringNew or Replace on Burnout: Default comparable standard EPACT MmotorFrom Table 313Table 313 for PY1 and PY2. From REF _Ref275556725 \h Table 314Table 314 for PY3 and PY4.Efficiency - ηeeVariableComparable EE NEMA Motor NameplateFrom REF _Ref261523165 \h \* MERGEFORMAT Table 011EDC Data GatheringCFFixedVariableSingle Motor Configuration: 74%Duplex Motor Configuration: 37%1Sources:California Public Utility Commission. Database for Energy Efficiency Resources 2005Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 13 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 13 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 9 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 10: Baseline Building Mechanical System Motor Efficiencies for PY1 and PY2 - ηbase (EPAct) Size HPOpen Drip Proof (ODP)# of PolesTotally Enclosed Fan-Cooled (TEFC)# of Poles642642Speed (RPM)Speed (RPM)120018003600120018003600180.0%82.5%75.5%80.0%82.5%75.5%1.584.0%84.0%82.5%85.5%84.0%82.5%285.5%84.0%84.0%86.5%84.0%84.0%386.5%86.5%84.0%87.5%87.5%85.5%587.5%87.5%85.5%87.5%87.5%87.5%7.588.5%88.5%87.5%89.5%89.5%88.5%1090.2%89.5%88.5%89.5%89.5%89.5%1590.2%91.0%89.5%90.2%91.0%90.2%2091.0%91.0%90.2%90.2%91.0%90.2%2591.7%91.7%91.0%91.7%92.4%91.0%3092.4%92.4%91.0%91.7%92.4%91.0%4093.0%93.0%91.7%93.0%93.0%91.7%5093.0%93.0%92.4%93.0%93.0%92.4%6093.6%93.6%93.0%93.6%93.6%93.0%7593.6%94.1%93.0%93.6%94.1%93.0%10094.1%94.1%93.0%94.1%94.5%93.6%12594.1%94.5%93.6%94.1%94.5%94.5%15094.5%95.0%93.6%95.0%95.0%94.5%20094.5%95.0%94.5%95.0%95.0%95.0%Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 14 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 14 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 10 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 11: Energy Efficient Building Mechanical SystemBaseline Motor Efficiencies-for PY3 and PY4 ηee (NEMA)Size HPOpen Drip Proof (ODP)# of PolesTotally Enclosed Fan-Cooled (TEFC)# of Poles642642Speed (RPM)Speed (RPM)120018003600120018003600182.50%85.50%77.00%82.50%85.50%77.00%1.586.50%86.50%84.00%87.50%86.50%84.00%287.50%86.50%85.50%88.50%86.50%85.50%388.50%89.50%85.50%89.50%89.50%86.50%589.50%89.50%86.50%89.50%89.50%88.50%7.590.20%91.00%88.50%91.00%91.70%89.50%1091.70%91.70%89.50%91.00%91.70%90.20%1591.70%93.00%90.20%91.70%92.40%91.00%2092.40%93.00%91.00%91.70%93.00%91.00%2593.00%93.60%91.70%93.00%93.60%91.70%3093.60%94.10%91.70%93.00%93.60%91.70%4094.10%94.10%92.40%94.10%94.10%92.40%5094.10%94.50%93.00%94.10%94.50%93.00%6094.50%95.00%93.60%94.50%95.00%93.60%7594.50%95.00%93.60%94.50%95.40%93.60%10095.00%95.40%93.60%95.00%95.40%94.10%12595.00%95.40%94.10%95.00%95.40%95.00%15095.40%95.80%94.10%95.80%95.80%95.00%20095.40%95.80%95.00%95.80%96.20%95.40%25095.40%95.80%95.00%95.80%96.20%95.80%30095.40%95.80%95.40%95.80%96.20%95.80%35095.40%95.80%95.40%95.80%96.20%95.80%40095.80%95.80%95.80%95.80%96.20%95.80%45096.20%96.20%95.80%95.80%96.20%95.80%50096.20%96.20%95.80%95.80%96.20%95.80%Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 15 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 15 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 11 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 12: Stipulated Hours of Use for Motors in Commercial BuildingsBuilding TypeMotor Usage GroupMotor Operating HoursRHRSOffice - LargeChilled Water Pump1610Heating Hot Water Pump4959Condenser Water Pump1610HVAC Fan4414Cooling Tower Fan1032Office - SmallChilled Water Pump1375Heating Hot Water Pump4959Condenser Water Pump1375HVAC Fan3998Cooling Tower Fan1032Hospitals & Healthcare - PumpsChilled Water Pump3801Heating Hot Water Pump4959Condenser Water Pump3801HVAC Fan7243Cooling Tower Fan1032Education - K-12Chilled Water Pump1444Heating Hot Water Pump4959Condenser Water Pump1444HVAC Fan4165Cooling Tower Fan1032Education - College & UniversityChilled Water Pump1718Heating Hot Water Pump4959Condenser Water Pump1718HVAC Fan4581Cooling Tower Fan1032RetailChilled Water Pump2347Heating Hot Water Pump4959Condenser Water Pump2347HVAC Fan5538Cooling Tower Fan1032Restaurants - Fast FoodChilled Water Pump2901Heating Hot Water Pump4959Condenser Water Pump2901HVAC Fan6702Cooling Tower Fan1032Restaurants - Sit DownChilled Water Pump2160Heating Hot Water Pump4959Condenser Water Pump2160HVAC Fan5246Cooling Tower Fan1032OtherAllAs MeasuredSource: Motor Inventory Form, PA Technical Working Group. (See notes below in REF _Ref274653038 \h Table 316)Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 16 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 16 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 12 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 13: Notes for Stipulated Hours of Use TableMotor Usage GroupMethod of Operating Hours CalculationChilled Water PumpHours when ambient temperature is above 60°F during building operating hoursHeating Hot Water PumpHours when ambient temperature is below 60°F during all hoursCondenser Water PumpHours when ambient temperature is above 60°F during building operating hoursHVAC FanOperating hours plus 20% of unoccupied hours?Cooling Tower FanCooling EFLH according to EPA 2002 (1032 hours for Philadelphia)?Notes: Ambient temperature is derived from BIN Master weather data from Philadelphia. Operating hours for each building type is estimated for typical use. using assumptions from Appendix E. Hospital & Healthcare operating hours differ for pumps and HVAC. Back up calculations and reference material can be found on the PA PUC website at the following address: Frequency Drive (VFD) ImprovementsThe following protocol for the measurement of energy and demand savings applies to the installation of Variable Frequency Drives (VFDs) in standard commercial building applications shown in REF _Ref275556523 \h Table 318: HVAC fans, cooling tower fans, chilled water pumps, condenser water pumps and hot water pumps. This protocol estimates savings relative to a constant volume system as the baseline condition. VFDs in any other application than those referenced REF _Ref275556523 \h Table 318 must follow a custom measure protocol, including industrial applications. Relative to HVAC fans, the protocol applies to conventional variable air volume (VAV) systems with terminal VAV boxes on the supply registers. A VAV system without terminal VAV boxes is subject to various control strategies and system configurations and must be evaluated using the custom approach. VFDs in industrial applications should also follow the custom path. For systems in which the baseline condition is not a constant volume system (e.g. vortex dampers), a custom measure protocol must be used. Note that wWhen changes in run hours are anticipated in conjunction with the installation of a VFD, a custom path must also be used.AlgorithmskWhEnergy Savings (kWh) = kWhbase - kWhpostkWheekWpeakDemand Savings (kW) = kWbase - kWpostkWeekWhbase = 0.746 X HP X LF/ηmotor X RHRSbasekWhpost kWhee = kWhbase X ESFkWbase = 0.746 X HP X LF/ηmotor X CFkWpost kWee = kWbase X DSFDefinitions of VariablesHP = Rated horsepower of the motorLF =Load Factor. Ratio of the average operating load to the nameplate rating of the motorηmotor = Motor efficiency at the full-rated load. For VFD installations, this can be either an energy efficient motor or standard efficiency motor. Motor efficiency varies with load and decreases dramatically below 50% load; this is reflected in the ESF term of the algorithm. RHRSbase = Annual run hours of the baseline motorCF = Demand Coincidence Factor. The percentage of the connected load that is on during electric system’s peak windowthe top 100 hours as defined in Section 1- Electric Resource SavingsSection 1.9.ESF= Energy Savings Factor. The energy savings factor is the percent baseline kWh consumption anticipated to occur as a result of the installation of the VFD (See REF _Ref275556523 \h Table 318). This factor can also be computed according to fan and pump affinity laws by modeling the flow reduction and related efficiency factors for both the motor and VFD under different load conditions. Hourly temperature bin data is used for this purpose.DSF= Demand Savings Factor. The demand savings factor is calculated by determining the ratio of the power requirement for the baseline and the VFD control at peak conditions (See REF _Ref275556523 \h Table 318). Since systems are customarily sized to 95% of cooling conditions and the peak 100 hours load represent a loading condition of 99%, and because VFDs are not 100% efficient, the demand savings for VFDs is relatively low for commercial HVAC applications where system loads tracks cooling requirements (DSF approaches 1).Description of Calculation MethodRelative to the above algorithm, kW values will be calculated for each VFD improvement in any project (account number). Each motor and the respective variables required to calculate the demand and energy savings for that motor will be entered into an inventory in Excel format, the Motor & VFD Inventory Form. The inventory will also specify the location for reference and validation. A sample of the Motor & VFD Inventory Form incorporating the algorithms for savings calculation is included in Appendix D.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 17 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 17 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 13 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 14: Variables for VFD CalculationsComponentTypeValueSourceMotor HPVariableNameplateEDC Data GatheringRHRSVariableBased on logging and modelingEDC Data Gathering Default REF _Ref248813884 \h \* MERGEFORMAT Error! Reference source not found. REF _Ref275556522 \h Table 315See table references REF _Ref275556522 \h Table 315LFVariableBased on spot metering and nameplateEDC Data GatheringDefault 75%1ESFVariableDefault See Table 318See table references REF _Ref275556523 \h Table 318DSFVariableDefault REF _Ref248816560 \h \* MERGEFORMAT Error! Reference source not found.See REF _Ref275556523 \h Table 318See table references REF _Ref275556523 \h Table 318Efficiency - ηbaseFixedComparable EPACT Motor NameplateEPACT, REF _Ref261523159 \h \* MERGEFORMAT Table 5010, REF _Ref261523165 \h \* MERGEFORMAT Table 5011EDC Data GatheringCFFixed74%1Source:California Public Utility Commission. Database for Energy Efficiency Resources 2005Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 18 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 18 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 14 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 15: ESF and DSF for Typical Commercial VFD InstallationsBuilding TypeMotor Usage GroupPECO,First EnergyAlleghany, DuquesnePPLESFDSFESFDSFESFDSFOffice - LargeChilled Water Pump0.3050.7920.2830.5960.2820.548Heating Hot Water Pump0.3211.0000.2781.0000.2751.000Condenser Water Pump0.2700.7920.2440.5960.2450.548HVAC Fan0.2930.8490.2780.6940.2760.657Cooling Tower Fan0.2700.7920.2440.5960.2450.548Office - SmallChilled Water Pump0.3080.7810.2860.5860.2860.548Heating Hot Water Pump0.3211.0000.2781.0000.2751.000Condenser Water Pump0.2730.7810.2460.5860.2480.548HVAC Fan0.2950.8410.2790.6860.2780.657Cooling Tower Fan0.2730.7810.2460.5860.2480.548Hospitals & Healthcare Chilled Water Pump0.2750.8690.2620.6750.2570.594Heating Hot Water Pump0.3211.0000.2781.0000.2751.000Condenser Water Pump0.2310.8690.2110.7500.2060.594HVAC Fan0.2760.9070.2610.7580.2600.694Cooling Tower Fan0.2450.8690.2220.6750.2170.594Education – K-12Chilled Water Pump0.3000.7700.2800.5710.2780.535Heating Hot Water Pump0.3211.0000.2781.0000.2751.000Condenser Water Pump0.2630.7710.2380.5710.2370.535HVAC Fan0.2880.8320.2710.6750.2700.646Cooling Tower Fan0.2630.7710.2380.5710.2370.535Education – College & UniversityChilled Water Pump0.3040.7960.2830.5990.2800.548Heating Hot Water Pump0.3211.0000.2781.0000.2751.000Condenser Water Pump0.2700.7960.2430.5990.2430.548HVAC Fan0.2930.8520.2770.6960.2750.657Cooling Tower Fan0.2700.7960.2430.5990.2430.548RetailChilled Water Pump0.3050.8690.2830.6750.2390.594Heating Hot Water Pump0.3211.0000.2781.0000.2751.000Condenser Water Pump0.2710.8690.2440.6750.2390.594HVAC Fan0.2950.9070.2780.7580.2760.694Cooling Tower Fan0.2710.8690.2440.6750.2390.594Restaurants - Fast FoodChilled Water Pump0.2910.8690.2290.6750.2670.594Heating Hot Water Pump0.3211.0000.2781.0000.2751.000Condenser Water Pump0.2530.8690.2730.6750.2240.594HVAC Fan0.2820.9070.2660.7580.2640.694Cooling Tower Fan0.2530.8690.2730.6750.2240.594Restaurants - Sit DownChilled Water Pump0.3070.8690.2840.6750.2790.594Heating Hot Water Pump0.3211.0000.2781.0000.2751.000Condenser Water Pump0.2720.8690.2460.6750.2410.594HVAC Fan0.2950.9070.2780.7580.2770.694Cooling Tower Fan0.2720.8690.2460.6750.2410.594OtherAllAs determined by worksheetNOTE FOR Table 3181. Back up calculations and reference material can be found on the PA PUC website at the following address: ?Source: Motor Inventory Workbook, PA Technical Working Group (See Appendix F for calculation method and assumptions used for derivation of ESF & DSF values).Industrial Air Compressors with Variable Frequency Drive Improvement for Industrial Air CompressorssThe energy and demand savings for variable frequency drives (VFDs) installed on industrial air compressors is based on the loading and hours of use of the compressor. In industrial settings, these factors can be highly variable and may be best evaluated using a custom path. The method for measurement set forth below may be appropriate for systems with a single compressor servicing a single load specific applications and that have has some of the elements of both a deemed and custom approach.In systems Systems with multiple compressors serving a common load are defined as non-standard applications and must follow a site specific custom measure protocol., care must be taken to determine the loading on each compressor serving the plant such that the load factor and run hours for each compressor are taken into account.AlgorithmskWhEnergy Savings (kWh) = 0.129 X HP X LF/ηmotor X RHRSbasekWDemand Savings (kW) = 0.129 X HPkWpeakCoincident Peak Demand Savings (kW) = 0.106 X HPDefinition of VariablesHP = Rated horsepower of the motorLF = Load Factor. Ratio of the average operating load to the nameplate rating of the motorηbase = Efficiency of the baseline motor RHRS = Annual run hours of the motorCF = Demand Coincidence Factor. The percentage of the connected load that is on during electric system’s peak window as defined in Section 1- Electric Resource SavingsSection1.9.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 19 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 19 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 15 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 16: Variables for Industrial Air Compressor CalculationComponentTypeValueSourceMotor HPVariableNameplateEDC Data GatheringRHRSVariableBased on logging and modelingEDC Data Gathering kW/motor HP, SavedFixed0.1291Coincident Peak kW/motor HPFixed0.1061LFVariableBased on spot metering/ nameplateEDC Data GatheringSources:Aspen Systems Corporation, Prescriptive Variable Speed Drive Incentive Development Support for Industrial Air Compressors, Executive Summary, June 20, 2005.HVAC SystemsThe energy and demand savings for Commercial and industrial Industrial HVAC for is determined from the algorithms listed in below.AlgorithmsAir Conditioning (includes room AC, central AC, air-cooled DX, split systems, and packaged terminal AC).kWhEnergy Savings (kWh) = (Btu/H / 1000) X (1/EERbEERbase -– 1/EERqEERee) X EFLH kWpeakDemand Savings (kW) = (Btu/H / 1000) X (1/EERbase – b-1/EEReeq) X CF Heat Pump (includes air-to-airair source HP, packaged terminal HP, water source HP, ground source HP and groundwater source HP).kWh= kWhcool + kWhheatkWhcoolEnergy Savings-Cooling (kWh)= (BtuHcool / 1000) X (1/EERbase – 1/EERee) X EFLHcool = (Btu/Hcool c/ 1000) X (1/SEERbEERbase -– 1/SEERqEERee) X EFLHcool kWhheatEnergy Savings-Heating (kWh) = (BtuHheat / 1000) / 3.412 X (1/COPbase – 1/COPee ) X EFLHheat = (Btu/Hheat h/ 11000) X (1/EERbHSPFbase -– 1/EERHSPFeeq ) X EFLHheat Demand Savings (kW)kWpeak = (Btu/Hccool / 1000) X (1/EERbase -– 1/EEReeq) X CF = (BtuHcool / 1000) X (1/SEERbase – 1/SEERee) X CF Where c is for cooling and h is for heating.Definition of VariablesTermsBtuH = Cooling cCapacity in Btu/Hour.EERb EERbase = Efficiency rating of the baseline unit. For units < 65,000 BtuH, SEER and HSPF should be used for cooling and heating savings, respectively. EERq EERee = Efficiency rating of the High energy Efficiency efficiency unit. For units < 65,000 BtuH, SEER and HSPF should be used for cooling and heating savings, respectively. COPbase = Efficiency rating of the baseline unit. For units < 65,000 BtuH, HSPF should be used for heating savings. COPee = Efficiency rating of the energy efficiency unit. For units < 65,000 BtuH, HSPF should be used for heating savings. CF = Demand Coincidence Factor. The percentage of the connected load that is on during electric system’s peak window as defined in Section 1- Electric Resource SavingsDemand Coincidence Factor. The percentage of the connected load that occurs during the electric system’s peak window as defined in Section 1.9.EFLHcool = Equivalent Full Load Hours for the cooling season – The kWh during the entire operating season divided by the kW at design conditions.EFLHheat = Equivalent Full Load Hours for the heating season – The kWh during the entire operating season divided by the kW at design conditions.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 20 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 20 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 16 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 17: Variables for AC and Heat PumpsComponentTypeValueSourceBtuHVariableARI or AHAM or Manufacturer DataNameplate data (ARI or AHAM)EDC’s Data GatheringEERbasebVariableNameplate dataEDC’s Data GatheringDefault values from REF _Ref248823664 \h \* MERGEFORMAT Error! Reference source not found.Table 321See Table 321EEReeqVariableNameplate data (ARI or AHAM)EDC’s Data GatheringCFFixed67%Engineering estimateEFLHcEFLHhVariableFixedBased on Logging or ModelingEDC’s Data Gathering Default values from REF _Ref275556730 \h \* MERGEFORMAT Table 322 and REF _Ref275556731 \h \* MERGEFORMAT Table 323 REF _Ref248823611 \h \* MERGEFORMAT Error! Reference source not found. and REF _Ref248823612 \h \* MERGEFORMAT Error! Reference source not found.Table 3–22See REF _Ref248823611 \h \* MERGEFORMAT Error! Reference source not found. and REF _Ref248823612 \h \* MERGEFORMAT Error! Reference source not found.Table 322 and Table 323Cooling Time Period Allocation FactorsFixedSummer/On-Peak 45%Summer/Off-Peak 39%Winter/On-Peak 7%Winter/Off-Peak 9%Heating Time Period Allocation FactorsFixedSummer/On-Peak 0%Summer/Off-Peak 0%Winter/On-Peak 41%Winter/Off-Peak 58%Sources:US Department of Energy. Energy StarENERGY STAR Calculator and Bin Analysis ModelsTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 21 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 21 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 17 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 18: HVAC Baseline EfficienciesEquipment Type and CapacityCooling BaselineHeating BaselineAir-Source Unitary HVAC/Split SystemsAir Conditioners< 5.41 tons13.0 SEERN/A> 5.41 tons andto <11.25 tons10.1 EER11.2 EERN/A> 11.25 tons to and < 20.00 tons9.5 EER11.0 EERN/A> 20.00 tons to and < 63.33 tons9.3 EER10.0 EERN/A> 63.33 tons9.7 EERN/AWater-Source and Evaporatively-Cooled Air Conditioners< 5.41 tons12.1 EERN/A> 5.41 tons and < 11.25 tons11.5 EERN/A> 11.25 tons and < 20.00 tons11.0 EERN/A> 20.00 tons11.5 EERN/AAir-Source Air-Air Heat Pump Systemss (cooling)< 5.41 tons:13 SEER7.7 HSPF> 5.41 tons to and < 11.25 tons9.911.0 EER3.3 COP> 11.25 tons to and < 20.00 tons 9.110.6 EER3.2 COP> 21 20.00 tonsto 30 tons8.89.5 EER3.2 COPWater-Source Water Source Heat Pumps (cooling)< 1.42 tons 11.2 EER4.2 COP> 1.42 tons and < 5.41 tons12.0 EER4.2 COPGround Water Source Heat Pumps (cooling mode)< 11.25 tons16.2 EER3.6 COPGround Source Heat Pumps GWSHPs< 11.25 tonsOpen and Closed Loop, All Capacities16.213.4 EER3.1 COPAir-Source Heat Pumps (heating mode)< 5.41 tons:7.7 HSPF> 5.41 tons and < 11.25 tons3.3 COP> 11.25 tons 3.2 COPWater-Source Heat Pumps (heating mode)< 11.25 tons4.2 COPGround Water Source Heat Pumps (heating mode)< 11.25 tons3.6 COPGround Source Heat Pumps (heating mode)< 11.25 tons3.1 COPPackaged Terminal Systems (Replacements)PTAC (cooling)10.9 - (0.213 x Cap / 1000) EERPTHP (cooling) 10.8 - (0.213 x Cap / 1000) EER2.9 - (0.213 x Cap / 1000) COPPTHP (heating)2.9 - (0.213 x Cap / 1000) EERTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 22 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 22 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 18 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 19: Cooling and Heating EFLH for Erie, Harrisburg, and PittsburghSpace TypeErieHarrisburgPittsburghCooling EFLHHeating EFLHCooling EFLHHeating EFLHCooling EFLHHeating EFLHArena/Auditorium/Convention Center3322,0026401,6365081,642College: Classes/Administrative3801,8157331,4845821,489Convenience Stores6713,1481,2932,5731,0262,582Dining: Bar Lounge/Leisure5031,3469691,1007691,104Dining: Cafeteria / Fast Food6772,0661,3041,6891,0351,695Dining: Restaurants5031,3469691,1007691,104Gymnasium/Performing Arts Theatre3801,8157331,4845821,489Hospitals/Health care7703211,4832631,177264Industrial: 1 Shift/Light Manufacturing4011,7377731,4206131,425Industrial: 2 Shift5451,1841,050968833972Industrial: 3 Shift6906261,3305121,055513Lodging: Hotels/Motels/Dormitories4181,6758051,3696381,374Lodging: Residential4181,6758051,3696381,374Multi-Family (Common Areas)7693,1481,4822,5731,1762,582Museum/Library4691,4749051,2057181,209Nursing Homes6303,1481,2132,5739632,582Office: General/Retail469884905722718725Office: Medical/Banks4691,4749051,2057181,209Parking Garages & Lots5171,2929971,0567911,060Penitentiary6023,1481,1602,5739202,582Police/Fire Stations (24 Hr)7693,1481,4822,5731,1762,582Post Office/Town Hall/Court House4691,4749051,2057181,209Religious Buildings/Church3322,0016401,6355081,641Retail4931,3839501,1307541,135Schools/University350984674805535808Warehouses (Not Refrigerated)382567735463583465Warehouses (Refrigerated)3821,8107351,4805831,485Waste Water Treatment Plant6901,4731,3301,2041,0551,208Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 23 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 23 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 19 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 20: Cooling and Heating EFLH for Williamsport, Philadelphia and ScrantonSpace TypeWilliamsportPhiladelphiaScrantonCooling EFLHHeating EFLHCooling EFLHHeating EFLHCooling EFLHHeating EFLHArena/Auditorium/Convention Center4541,7267111,6064281,747College: Classes/Administrative5201,5658151,4574901,584Convenience Stores9172,7151,4362,5268642,747Dining: Bar Lounge/Leisure6881,1611,0771,0806481,175Dining: Cafeteria / Fast Food9251,7821,4491,6588721,803Dining: Restaurants6881,1611,0771,0806481,175Gymnasium/Performing Arts Theatre5201,5658151,4574901,584Hospitals/Health care1,0522771,6482,526992280Industrial: 1 Shift/Light Manufacturing5481,4988591,3945171,516Industrial: 2 Shift7451,0221,1669517021,034Industrial: 3 Shift9445401,478502889546Lodging: Hotels/Motels/Dormitories5711,4448941,3445381,462Lodging: Residential5711,4448941,3445381,462Multi-Family (Common Areas)1,0522,7151,6472,5269912,747Museum/Library6421,2711,0051,1836051,286Nursing Homes8612,7151,3482,5268112,747Office: General/Retail6427621,005709605771Office: Medical/Banks6421,2711,0051,1836051,286Parking Garages & Lots7071,1141,1071,0376661,128Penitentiary8232,7151,2892,5267752,747Police/Fire Stations (24 Hr)1,0522,7151,6472,5269912,747Post Office/Town Hall/Court House6421,2711,0051,1836051,286Religious Buildings/Church4541,7257111,6054281,746Retail6741,1931,0551,1106351,207Schools/University478849749790451859Warehouses (Not Refrigerated)522489817455492495Warehouses (Refrigerated)5221,5618171,4534921,580Waste Water Treatment Plant9441,2701,4781,1828891,285Electric ChillersThis protocol estimates savings for installing high efficiency electric chillers compared to standard efficiency chillers. The measurement of energy and demand savings for C/I Chillers is based on algorithms with key variables (i.e., kW/tonEfficiency, Coincidence Factor, Equivalent Full Load Hours). These prescriptive algorithms and stipulated values are valid for standard commercial applications, defined as unitary electric chillers serving a single load at the system or sub-system level. The savings calculated using the prescriptive algorithms need to be supported by a certification that the chiller is operating at site design load condition.All other chiller applications, including multiple chiller configurations, chillers with VSDVariable Frequency Drives (VFDs)s, chillers serving multiple load groups, and chillers in industrial applications are defined as non-standard applications and must follow a site specific custom protocol. AlgorithmsEfficiency ratings in EERkWhEnergy Savings (kWh) = (Tons X 12) / 3.412 X (1 / IPLVb EERbase – 1 / /IPLVqEERee) X EFLH kWpeakDemand Savings (kW) = Tons X 12 X (1 / EERbase – 1 / EEReekW/tonb – kW/tonq) X PLCF Efficiency ratings in kW/tonkWh = Tons X (kW/tonbase – kW/tonee) X EFLH kWpeak = Tons X (kW/tonbase – kW/tonee) X PLCF Definition of VariablesTons = The capacity of the chiller (in tons) at site design conditions accepted by the program.kW/tonbase = Design Rated Efficiency of the baseline chiller. See REF _Ref275556732 \h Table 324 for values.kW/tonq tonee = Design Rated Efficiency of the proposed energy efficient chiller from the manufacturer data and equipment ratings in accordance with ARI Standards 550/590 latest edition.IPLVbase = Integrated Part Load Value of the baseline chiller. See REF _Ref275556732 \h Table 324 for valuesIPLVq IPLVee = Integrated Part Load Value of the proposed energy efficient chiller from the manufacturer data and equipment ratings in accordance with ARI Standards.LF = Load Factor – Ratio of the average operating load to the design rated load.PLCF = Peak Load Coincidence Factor – Represents the percentage of the total load which is on during electric system’s Peak Window as defined in Section 1- Electric Resource Savings.EFLH = Equivalent Full Load Hours – The kWh during the entire operating season divided by the kW at design conditions.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 24 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 24 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 20 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 21: Electric Chiller VariablessComponentTypeValueSourceTonsVariableFrom AEPS Application; EDC Data GatheringkW/tonbaseEERbaseVariableDefault value from REF _Ref275892974 \h Table 325See REF _Ref275892974 \h Table 325kW/toneeEEReeVariableNameplate Data. ARI Standards 550/590AEPS Application; EDC Data GatheringPLCFFixed90%Engineering Estimate EFLHFixedDefault values from REF _Ref275549497 \h Table 326Table 325 REF _Ref275556526 \h Table 326See REF _Ref275549497 \h Table 326ComponentSourceTonsEDC Data GatheringkW/tonbASHRAE 90.1 2007kW/tonqAEPS Application; EDC Data GatheringPLCFEngineering estimate EFLHSee TablesTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 25: Electric Chiller Baseline Efficiencies (IECC 2009)Chiller TypeSizePath A (Primarily Full Load)Path B (Primarily Part Load)SourceAir Cooled Chillers< 150 tonsFull load: 9.562 EERIPLV: 12.500 EERIECC 2009 Table 503.2.3 (7) Post 1/1/2010>=150 tonsFull load: 9.562 EERIPLV: 12.500 EERWater Cooled Positive Displacement or Reciprocating Chiller< 75 tonsFull load: 0.780 kW/tonIPLV: 0.600 kW/ton>=75 tons and < 150 tonsFull load: 0.775 kW/tonIPLV: 0.586 kW/ton>=150 tons and < 300 tonsFull load: 0.680 kW/tonIPLV: 0.540 kW/ton>=300 tonsFull load: 0.620 kW/tonIPLV: 0.490 kW/tonWater Cooled Centrifugal Chiller<300 tonsFull load: 0.634 kW/tonIPLV: 0.450 kW/ton>=300 tons and < 600 tonsFull load: 0.576 kW/tonIPLV: 0.400 kW/ton>=600 tonsFull load: 0.570 kW/tonIPLV: 0.400 kW/tonTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 26 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 25 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 21 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 22: Chiller Cooling EFLH for Erie, Harrisburg, and Pittsburghby LocationHarrisburgSpace TypeCooling EFLHErieCooling EFLHHarris-burgCooling EFLHPitts-burghWilliam-sportPhila-delphiaScran-tonArena/Auditorium/Convention Center332640508454711428College: Classes/Administrative380733582520815490Convenience Stores6711,2931,0269171,436864Dining: Bar Lounge/Leisure5039697696881,077648Dining: Cafeteria / Fast Food6771,3041,0359251,449872Dining: Restaurants5039697696881,077648Gymnasium/Performing Arts Theatre380733582520815490Hospitals/Health care7701,4831,1771,0521,648992Lodging: Hotels/Motels/Dormitories418805638548859517Lodging: Residential418805638571894538Multi-Family (Common Areas)7691,4821,1761,0521,647991Museum/Library4699057186421,005605Nursing Homes6301,2139638611,348811Office: General/Retail4699057186421,005605Office: Medical/Banks4699057186421,005605Parking Garages & Lots5179977917071,107666Penitentiary6021,1609208231,289775Police/Fire Stations (24 Hr)7691,4821,1761,0521,647991Post Office/Town Hall/Court House4699057186421,005605Religious Buildings/Church332640508454711428Retail4939507546741,055635Schools/University350674535478749451Warehouses (Not Refrigerated)382735583522817492Warehouses (Refrigerated)382735583522817492Waste Water Treatment Plant6901,3301,0559441,478889Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 26 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 22 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 23: Chiller EFLH for Williamsport, Philadelphia and ScrantonWilliamsportPhiladelphiaScrantonSpace TypeCooling EFLHHeating EFLHCooling EFLHHeating EFLHCooling EFLHHeating EFLHArena/Auditorium/Convention Center4541,7267111,6064281,747College: Classes/Administrative5201,5658151,4574901,584Convenience Stores9172,7151,4362,5268642,747Dining: Bar Lounge/Leisure6881,1611,0771,0806481,175Dining: Cafeteria / Fast Food9251,7821,4491,6588721,803Dining: Restaurants6881,1611,0771,0806481,175Gymnasium/Performing Arts Theatre5201,5658151,4574901,584Hospitals/Health care1,0522771,6482,526992280Industrial: 1 Shift/Light Manufacturing5481,4988591,3945171,516Lodging: Residential5711,4448941,3445381,462Multi-Family (Common Areas)1,0522,7151,6472,5269912,747Museum/Library6421,2711,0051,1836051,286Nursing Homes8612,7151,3482,5268112,747Office: General/Retail6427621,005709605771Office: Medical/Banks6421,2711,0051,1836051,286Parking Garages & Lots7071,1141,1071,0376661,128Penitentiary8232,7151,2892,5267752,747Police/Fire Stations (24 Hr)1,0522,7151,6472,5269912,747Post Office/Town Hall/Court House6421,2711,0051,1836051,286Religious Buildings/Church4541,7257111,6054281,746Retail6741,1931,0551,1106351,207Schools/University478849749790451859Warehouses (Not Refrigerated)522489817455492495Warehouses (Refrigerated)5221,5618171,4534921,580Waste Water Treatment Plant9441,2701,4781,1828891,285Anti-Sweat Heater ControlsAnti-sweat heater (ASH) controls sense the humidity in the store outside of reach-in, glass door refrigerated cases and turn off anti-sweat heaters during periods of low humidity. Without controls, anti-sweat heaters run continuously whether they are necessary or not. Savings are realized from the reduction in energy used by not having the heaters running at all times. In addition, secondary savings result from reduced cooling load on the refrigeration unit when the heaters are off. The ASH control is applicable to glass doors with heaters, and the savings given below are based on adding controls to doors with uncontrolled heaters. The savings calculated from these algorithms is on a per door basis for two temperatures: Refrigerator/Coolers and Freezers. A default value to be used when the case service temperature is unknown is also calculated. Furthermore, impacts are calculated for both a per-door and a per-linear-feet of case unit basis, because both are used for Pennsylvania energy efficiency programs.AlgorithmsRefrigerator/CoolerkWhper unitEnergy Impact (kWhCooler / DoorFt) = (kWCoolerBase / DoorFt) * (8,760 * CHAoff ) * (1+RH/COPCool) kWpeak per unitPeak Demand Impact (kWCooler/ DoorFt) = (kWCoolerBase / DoorFt) * CHPoff * (1+RH/COPCool) * DF kWhTotal energy savings (kWh) = N * kWhper unitkWhCooler /DoorFtTotal peak demand impact (kW)kWpeak = N * kWpeak per unitkWCooler/ DoorFtFreezerkWhper unitEnergy Impact (kWhFreezer/ DoorFt) = (kWFreezerBase / DoorFt) * (8,760 * FHAoff) * (1+RH/COPFreeze) kWpeak per unitPeak Demand Impact (kWFreezer/ DoorFt) = (kWFreezerBase / DoorFt) * FHPoff * (1+RH/COPFreeze) * DF Total energy savings (kWh)kWh = N * kWhper unitkWFreezerBase / DoorFtTotal peak demand impact (kW) kWpeak= N * kWpeak per unitkWFreezerBase / DoorFtDefault (case service temperature is unknown)This algorithm should only be used when the refrigerated case type or service temperature is unknown or this information is not tracked as part of the EDC data collection.kWhper unitEnergy Impact (kWh/ DoorFt) = {(1-PctCooler) * kWhFreezer/ DoorFt + PctCooler*kWhCooler/ DoorFt }kWpeak per unitPeak Demand Impact (kW/ DoorFt) = {(1- PctCooler) * kWFreezer/ DoorFt + PctCooler *kWCooler/ DoorFt }Total energy savings (kWh)kWh = N * kWhper unitkWh/DoorFtkWpeakTotal peak demand impact (kW) = N * kWpeak per unitkW/DoorFtDefinition of TermsN = Number of doors or case length in linear feet having ASH controls installedkWCoolerBase = Per door power consumption (kW) of cooler case ASHs without controlskWFreezerBase = Per door power consumption (kW) of freezer case ASHs without controls8760 = Operating hours (365 days * 24 hr/day)CHPoff = Percent of time cooler case ASH with controls will be off during the peak periodCHAoff = Percent of time cooler case ASH with controls will be off annuallyFHPoff = Percent of time freezer case ASH with controls will be off during the peak periodFHAoff = Percent of time freezer case ASH with controls will be off annuallyDF = Demand diversity factor, accounting for the fact that not all anti-sweat heaters in all buildings in the population are operating at the same time.RH = residual heat fraction; estimated percentage of the heat produced by the heaters that remains in the freezer or cooler case and must be removed by the refrigeration unit.COPCool = coefficient of performance of cooler COPFreeze = coefficient of performance of freezerDoorFt = Conversion factor to go between per door or per linear foot basis. Either 1 if per door or linear feet per door if per linear foot. Both unit basis values are used in Pennsylvania energy efficiency programs. PctCooler = Typical percent of cases that are medium-temperature refrigerator/cooler cases. Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 27 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 27 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 23 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 24 Anti-Sweat Heater Controls – Values and ReferencesComponentTypeValueSourcesNVariable# of doors or case length in linear feetEDC Data Gathering RHFixed0.651UnitFixedDoor = 1Linear Feet= 2.52Refrigerator/CoolerkWCoolerBaseFixed0.1091CHPoffFixed20%1CHAoffFixed85%1DF CoolFixed13COPCoolFixed2.51FreezerkWFreezerBaseFixed0.1911FHPoffFixed10%1FHAoffFixed75%1DFFreezeFixed13COPFreezeFixed1.31PctCoolerFixed68%4Sources:State of Wisconsin, Public Service Commission of Wisconsin, Focus on Energy Evaluation, Business Programs Deemed Savings Manual, March 22, 2010.Three door heating configurations are presented in this reference: Standard, low-heat, and no-heat. The standard configuration was chosen on the assumption that low-heat and no-heat door cases will be screened from participation.Review of various manufacturers’ web sites yields 2.5’ average door length. Sites include: HYPERLINK "" "" "" York Standard Approach for Estimating Energy Savings from Energy Efficiency Measures in Commercial and Industrial Programs, Sept 1, 2009.2010 ASHRAE Refrigeration Handbook, page 15.1 “Medium- and low-temperature display refrigerator line-ups account for roughly 68 and 32%, respectively, of a typical supermarket’s total display refrigerators.”Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 28 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 28 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 24 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 25 Recommended Fully Deemed Impact EstimatesDescriptionPer DoorImpactPer Linear Ft of CaseImpactRefrigerator/CoolerEnergy Impact1,023 kWh per door409 kWh per lin ftPeak Demand Impact0.0275 kW per door0.0110 kW per lin ftFreezerEnergy Impact1,882 kWh per door753 kWh per lin ftPeak Demand Impact0.0287 kW per door0.0115 kW per lin ftDefault (case service temperature unknown)Energy Impact1,298 kWh per door519 kWh per lin ftPeak Demand Impact0.0279 kW per door0.0112 kW per lin ftMeasure Life12 Years (DEER 2008, Regional Technical Forum)Other references (not to be included in TRM). The algorithm used in the WI TRM results in values that are aligned with other studies and are used for PA.Summary of Energy Savings by State/RegionCase TypeNYWINorthwest RTFILPGESCERefrigerator (native units)--488 – 1,023 kWh per door324 kWh per linear foot389 kWh per linear foot431 kWh per linear foot402 kWh per linear footRefrigerator (per door units)*--488 – 1,023 kWh812 kWh972 kWh1,077 kWh1,005kWhFreezer (native units)1,764 – 1,896 kWh per door522 – 1,882 kWh per door 434 kWh per linear foot409 kWh per door----Freezer (per door units)*1,764 – 1,896 kWh522 – 1,882 kWh1,085 kWh1,022 kWh----* Assume 2.5 linear feet per door, based on web search of commercially available display cases shows most are around 30” per door.Summary of Demand Savings by State/RegionCase TypeNYWIILPGESCERefrigerator (native units)0.013 – 0.027 kW/door 0.00744 kW per linear foot0.0073 kW per linear foot0.007 kW per linear footRefrigerator (per door units)*0.013 – 0.027 kW0.018 kW0.018 kW0.0175 kWFreezer (native units)00.008 – 0.029 kW/ per door 0.00963 kW per linear foot----Freezer (per door units)*00.008 – 0.029 kW0.024 kW----Sources “Work Paper PGEREF108 Anti-Sweat Heat (ASH) Controls”, Pacific Gas and Electric, May 29, 2009 Estimates 431 kWh/linear ft of case and 0.0073 kW/linear ft of case demand savings for climate zone 16 (most closely comparable to PA).“Anti-Sweat Heater Controls”, Workpaper WPSCNRRN0009. Southern California Edison Company. 2007. “A Study of Energy Efficient Solutions, Refrigeration Technology and Test Center (RTTC), Southern California Edison, Nov 14, 2000 and personal communication (2010).Older refrigeration cases in high humidity environment (55% RH) show minimal energy savings with ASH controls.Newer units with newer glazing and door materials see higher savings, although savings are not quantified in report.New York Standard Approach for Estimating Energy Savings from Energy Efficiency Measures in Commercial and Industrial Programs, Sept 1, 2009.Based on energy simulation (DOE-2.2) modeling.Energy savings range from 1,764 – 1,896 kWh/door (vary by city) for freezerNo demand savings.Ameren Illinois ActOnEnergy Business Program Technical Reference Manual, p. 99-100. Note TRM incorrectly cites units are per door, confirmed units are actually per linear foot via personal communication with Rich Hackner of GDS (7/19/10). He also cites DEER and a RTTC paper as source.Refrigerator - 389 kWh and 0.007436 per linear foot Freezer - 409 kWh and 0.009634 kW per linear footRegional Technical Forum (RTF), Northwest Power and Conservation Council, 2010 (HYPERLINK ""). Deemed savings values available by personal communication with Adam Hadley (HYPERLINK "mailto:adam@"adam@ 503-235-6458). Low temp – 434 kWh per linear footMed Temp – 324 kWh per linear footState of Wisconsin, Public Service Commission of Wisconsin, Focus on Energy Evaluation, Business Programs Deemed Savings Manual, March 22, 2010. The errors noted in the TRM (footnotes 138 and 139) have been accounted for and the values re-calculated.For freezers, savings range from 522 – 1,882 kWh/door (0.008 – 0.0270 kW/door). Variation depends on if door has heater (no heater: 522 kWh, standard door: 1,882 kWh savings)For refrigerated case, savings range from 488 (no heat door) – 1,023 (standard door) kWh/door (0.013 – 0.027 kW/door).2010 ASHRAE Refrigeration Handbook, page 15.1 “Medium- and low-temperature display refrigerator line-ups account for roughly 68 and 32%, respectively, of a typical supermarket’s total display refrigerators.”High-Efficiency Refrigeration/Freezer CasesAlgorithmsProducts that can be ENERGY STAR 2.0 qualified: Examples of product types that may be eligible for qualification include: reach-in, roll-in, or pass-through units; merchandisers; undercounter units; milk coolers; back bar coolers; bottle coolers; glass frosters; deep well units; beer-dispensing or direct draw units; and bunker freezers.kWhEnergy Savings (kWh) = (kWhbase – kWhESee)*days/yearkWpeakDemand Savings (kW) = (kWhbase – kWhESee) * CF/24Products that cannot be ENERGY STAR qualified:Drawer cabinets, prep tables, deli cases, and open air units are not eligible for ENERGY STAR under the Version 2.0 specification.For these products, savings should be treated under a high-efficiency case fan, Electronically Commutated Motor (ECM) option. .Definition of TermskWhbase = The unit energy consumption of a standard unit (kWh/day)kWhESee = The unit energy consumption of the ENERGY STAR-qualified unit (kWh/day)CF = The coincidence factor which equates the installed unit’s connected load to its demand at time of system peak.V = Internal VolumeTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 29 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 29 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 25 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 26: Refrigeration Cases - ReferencesComponentTypeValueSourceskWhbase CalculatedSee REF _Ref275903160 \h Table 330 and REF _Ref275903163 \h Table 331Tables 1kWhESee CalculatedSee REF _Ref275903160 \h Table 330 and REF _Ref275903163 \h Table 331Tables 1VVariableEDC data gatheringDays/yearFixed3651CFFixed1.02Sources:ENERGY STAR calculator, March, 2010 update. Load shape for commercial refrigeration equipmentTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 30 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 30 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 26 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 27: Refrigeration Case EfficienciesVolume (ft3)Glass DoorSolid DoorkWhESee/daykWhbase/daykWhESee/daykWhbase/dayV < 150.118*V + 1.3820.12*V + 3.340.089*V + 1.4110.10*V + 2.0415 ≤ V < 300.140*V + 1.0500.037*V + 2.20030 ≤ V < 500.088*V + 2.6250.056*V + 1.63550 ≤ V0.110*V + 1.500.060*V + 1.416Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 31 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 27 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 28: Refrigeration Case Savings (algorithm)Volume (ft3)Annual Savings (kWh)Glass DoorSolid Door0 < V < 15 (0.002*V + 1.958)*365 (0.011*V + 0.629)*36515 ≤ V < 30 (-0.020*V + 2.29)*365 (0.063*V – 0.16)*36530 ≤ V < 50 (0.032*V + 0.715)*365 (0.044*V + 0.405)*36550 ≤ V (0.010*V + 1.84)*365 (0.040*V + 0.624)*365Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 32 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 28 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 29: Freezer Case EfficienciesTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 31: Freezer Case EfficienciesVolume (ft3)Glass DoorSolid DoorkWhESee/daykWhbase/daykWhESee/daykWhbase/dayV < 150.607*V+0.8930.75*V + 4.100.250*V + 1.250.4*V + 1.3815 ≤ V < 300.733*V - 1.000.40*V – 1.0030 ≤ V < 500.250*V + 13.500.163*V + 6.12550 ≤ V0.450*V + 3.500.158*V + 6.333Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 33 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 29 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 30: Freezer Case Savings (algorithm)Volume (ft3)Annual Savings (kWh)Glass DoorSolid DoorV < 15 (0.143*V + 3.207)*365 (0.15*V + 0.13)*36515 ≤ V < 30 (0.017*V + 5.1)*365 (2.38)*36530 ≤ V < 50 (0.50*V - 9.4)*365 (0.237*V - 4.745)*36550 ≤ V (0.30*V + 0.6)*365 (0.242*V - 4.953)*365If precise case volume is unknown, default savings given in tables below can be usedTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 32 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 34 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 30 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 31: Refrigeration Case SavingsVolume (ft3)Annual Energy Savings (kWh)Demand Impacts (kW)Glass DoorSolid DoorGlass DoorSolid DoorV < 157222680.08240.030615 ≤ V < 306834240.07790.048430 ≤ V < 507638380.08710.095750 ≤ V9271,2050.10580.1427Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 33 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 35 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 31 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 32: Freezer Case SavingsVolume (ft3)Annual EnergySavings (kWh)Demand Impacts (kW)Glass DoorSolid DoorGlass DoorSolid DoorV < 151,9018140.21700.092915 ≤ V < 301,9928690.22740.099230 ≤ V < 504,4171,9880.50420.226950 ≤ V6,6803,4050.76250.3887Effective Useful Life12 years According to the Food Service Technology Center (as stated in ENERGY STAR calculator).Additional information not to be included in TRMDemand SavingsThe coincidence factor (CF) for commercial refrigeration equipment is assumed to be 1. In other words, this equipment is operating continuously, 8,760 hours per year. This assumption is also used in the Wisconsin TRM and the ENERGY STAR calculator.Average SavingsThe average savings is based on average of the unit volumes within each category that appear on the list of qualifying units, current as of 8/16/10. Average volume by size category is given in table below.RefrigeratorsSize CategoryAverage Volume (ft3)V < 159.515 ≤ V < 302130 ≤ V < 504350 ≤ V70FreezersSize CategoryAverage Volume (ft3)V < 151415 ≤ V < 302130 ≤ V < 504350 ≤ V59High-Efficiency Evaporator Fan Motors for Reach-In Refrigerated CasesThis protocol covers energy and demand savings associated with retrofit of existing shaded-pole evaporator fan motors in reach-in refrigerated display cases with either an Electronically Commutated (ECM) or Permanent Split Capacitor (PSC) motor. PSC motors must replace shaded pole (SP) motors, and ECM motors can replace either SP or PSC motors. A default savings option is offered if case temperature and/or motor size are not known. However, these parameters should be collected by EDCs for greatest accuracy.There are two sources of energy and demand savings through this measure. There are the direct savings associated with replacement of an inefficient motor with a more efficient one, and there are the indirect savings of a reduced cooling load on the refrigeration unit due to less heat gain from the more efficient evaporator fan motor in the air-stream. AlgorithmsCoolerkWpeak per unitPeak Demand Impact (kWcooler/motor) = (Wbase – Wee) / 1,000 * LF * DCEvapCool * (1 + 1 / (DG * COPcooler))Energy Impact (kWhcooler/motor)kWhper unit = kWpeak per unit kWcooler/motor * 8,760kWpeakTotal Demand Impact (kWcooler) = N *kWpeak per unitkWcooler/motor kWhTotal Energy Impact (kWhcooler) = N * kWhper unitkWhcooler/motorFreezerkWpeak per unitPeak Demand Impact (kWfreezer/motor) = (Wbase – Wee) / 1,000 * LF * DCEvapFreeze * (1 + 1 / (DG * COPfreezer))kWhper unitEnergy Impact (kWhfreezer/motor) = kWpeak per unit kWfreezer/motor * 8,760kWpeakTotal Demand Impact (kWfreezer) = N *kWpeak per unitkWfreezer/motor kWhTotal Energy Impact (kWhfreezer) = N * kWhper unitkWhfreezer/motorDefault (case service temperature not known)kWpeak per unitPeak Demand Impact (kWdefault/motor) = {(1-PctCooler) * kWFreezer/motor + PctCooler*kWCooler/motor} kWhper unitEnergy Impact (kWhdefault/motor) = kWpeak per unitkWdefault * 8,760kWpeakTotal Demand Impact (kWdefault) = N *kWpeak per unitkWdefault/motor kWhTotal Energy Impact (kWhdefault) = N * kWhdefault/motorDefinition of TermsN = Number of motors replacedWbase = Input wattage of existing/baseline evaporator fan motorWee = Input wattage of new energy efficient evaporator fan motorLF = Load factor of evaporator fan motorDCEvapCool = Duty cycle of evaporator fan motor for coolerDCEvapFreeze = Duty cycle of evaporator fan motor for freezerDG = Degradation factor of compressor COPCOPcooler = Coefficient of performance of compressor in the coolerCOPfreezer= Coefficient of performance of compressor in the freezerPctCooler = Percentage of coolers in stores vs total of freezers and coolers8760 = Hours per yearTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 34 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 36 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 32 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 33: Variables for High-Efficiency Evaporator Fan MotorVariableTypeValueSourceWbaseFixedDefaultTable X-2Nameplate Input WattageEDC Data GatheringWeeVariableDefaultTable X-2Nameplate Input WattageEDC Data GatheringLFFixed0.91DCEvapCoolFixed100%2DCEvapFreezeFixed94.4%2DGFixed0.983COPcoolerFixed2.51COPfreezerFixed1.31PctCoolerFixed68%4Sources:PSC of Wisconsin, Focus on Energy Evaluation, Business Programs: Deemed Savings Manual V1.0, p. 4-103 to 4-106.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 35 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 37 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 33 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 34: Variables for HE Evaporator Fan MotorMotor CategoryWeighting Number (population)1Motor Output WattsSP Efficiency1SP Input WattsPSC Efficiency2PSC Input WattsECM Efficiency1ECM Input Watts1-14 watts (Using 9 watt as industry average)91%918%5041%2266%1416-23 watts (Using 19.5 watt as industry average)3%19.521%9341%4866%30 1/20 HP (~37 watts)6%3726%14241%9066%56Sources:Regional Technical Forum (RTF) as part of the Northwest Power & Conservation Council, Deemed Measures List. Grocery Display Case ECM, FY2010, V2. Accessed from RTF website on July 30, 2010.AO Smith New Product Notification. I-motor 9 & 16 Watt. Stock Numbers 9207F2 and 9208F2. Web address: . Accessed July 30, 2010.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 36 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 38 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 34 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 35: Shaded Pole to PSC Deemed SavingsMeasureWbase(Shaded Pole)Wee(PSC)LFDCEvapDGCOP per case TempDemand Impact (kW)Energy Impact (kWh)Cooler: Shaded Pole to PSC: 1-14 Watt50220.9100%0.982.50.0355311Cooler: Shaded Pole to PSC: 16-23 Watt93480.9100%0.982.50.0574503Cooler: Shaded Pole to PSC: 1/20 HP (37 Watt)142900.9100%0.982.50.0660578Freezer: Shaded Pole to PSC: 1-14 Watt50220.994.4%0.981.30.0425373Freezer: Shaded Pole to PSC: 16-23 Watt93480.994.4%0.981.30.0687602Freezer: Shaded Pole to PSC: 1/20 HP (37 Watt)142900.994.4%0.981.30.0790692Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 37 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 39 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 35 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 36: PSC to ECM Deemed SavingsMeasureWbase(PSC)Wee(ECM)LFDCEvapDGCOP per case TempDemand Impact (kW)Energy Impact (kWh)Cooler: PSC to ECM:1-14 Watt22140.9100%0.982.50.010592Cooler: PSC to ECM:16-23 Watt48300.9100%0.982.50.0228200Cooler: PSC to ECM:1/20 HP (37 Watt)90560.9100%0.982.50.0433380Freezer: PSC to ECM: 1-14 Watt22140.994.4%0.981.30.0126110Freezer: PSC to ECM: 16-23 Watt48300.994.4%0.981.30.0273239Freezer: PSC to ECM: 1/20 HP (37 Watt)90560.994.4%0.981.30.0518454Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 38 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 40 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 36 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 37: Shaded Pole to ECM Deemed SavingsMeasureWbase(Shaded Pole)Wee(ECM)LFDCEvapDGCOP per case TempDemand Impact (kW)Energy Impact (kWh)Cooler: Shaded Pole to ECM:1-14 Watt50140.9100%0.982.50.0461404Cooler: Shaded Pole to ECM:16-23 Watt93300.9100%0.982.50.0802703Cooler: Shaded Pole to ECM:1/20 HP (37 Watt)142560.9100%0.982.50.1093958Freezer: Shaded Pole to ECM:1-14 Watt50140.994.4%0.981.30.0551483Freezer: Shaded Pole to ECM:16-23 Watt93300.994.4%0.981.30.0960841Freezer: Shaded Pole to ECM:1/20 HP (37 Watt)142560.994.4%0.981.30.13081146Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 39 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 41 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 37 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 38: Default High-Efficiency Evaporator Fan Motor Deemed SavingsMeasureCooler Weighted Demand Impact (kW)Cooler Weighted Energy Impact (kWh)Freezer Weighted Demand Impact (kW)Freezer Weighted Energy Impact (kWh)Default Demand Impact (kW)Default Energy Impact (kWh)Shaded Pole to PSC0.03803330.04553990.0404354PSC to ECM0.01291130.01541350.0137120Shaded Pole to ECM0.05094460.06095340.0541474Measure Life15 yearsSources:“ActOnEnergy; Business Program-Program Year 2, June, 2009 through May, 2010. Technical Reference Manual, No. 2009-01.” Published 12/15/2009. “Efficiency Maine; Commercial Technical Reference User Manual , No. 2007-1.” Published 3/5/07.Regional Technical Forum (RTF) as part of the Northwest Power & Conservation Council, Deemed Measures List. Grocery Display Case ECM, FY2010, V2. Accessed from RTF website on July 30, 2010.High-Efficiency Evaporator Fan Motors for Walk-in Refrigerated CasesThis protocol covers energy and demand savings associated with retrofit of existing shaded-pole (SP) or permanent-split capacitor (PSC) evaporator fan motors in walk-in refrigerated display cases with an electronically commutated motor (ECM). A default savings option is offered if case temperature and/or motor size are not known. However, these parameters should be collected by EDCs for greatest accuracy.There are two sources of energy and demand savings through this measure. There are the direct savings associated with replacement of an inefficient motor with a more efficient one, and there are the indirect savings of a reduced cooling load on the refrigeration unit due to less heat gain from the more efficient evaporator fan motor in the air-stream. AlgorithmsCoolerkWpeak per unitPeak Demand Impact (kWcooler/motor) = (Wbase – Wee) / 1,000 * LF * DCEvapCool * (1 + 1 / (DG * COPcooler))kWhper unit Energy Impact (kWhcooler/motor) = kWpeak per unit kWcooler/motor * HRkWpeak Total Demand Impact (kWcooler) = N *kWpeak per unitkWcooler/motor kWhTotal Energy Impact (kWhcooler) = N * kWhper unitkWhcooler/motorFreezerkWpeak per unitPeak Demand Impact (kWfreezer/motor) = (Wbase – Wee) / 1,000 * LF * DCEvapFreeze * (1 + 1 / (DG * COPfreezer))Energy Impact (kWhfreezer/motor)kWhper unit = kWpeak per unit kWfreezer/motor * HRkWpeak Total Demand Impact (kWfreezer) = N *kWpeak per unitkWfreezer/motor kWhTotal Energy Impact (kWhfreezer) = N * kWhper unitkWhfreezer/motorDefault (case service temperature not known)kWpeak per unitPeak Demand Impact (kWdefault/motor) = {(1-PctCooler) * kWFreezer/motor + PctCooler*kWCooler/motor} Energy Impact (kWhdefault/motor)kWhper unit = kWpeak per unitkWdefault * HRkWpeak Total Demand Impact (kWdefault) = N *kWpeak per unitkWdefault/motor kWhTotal Energy Impact (kWhdefault) = N * kWhper unitkWhdefault/motorDefinition of TermsN = Number of motors replacedWbase = Input wattage of existing/baseline evaporator fan motorWee = Input wattage of new energy efficient evaporator fan motorLF = Load factor of evaporator fan motorDCEvapCool = Duty cycle of evaporator fan motor for coolerDCEvapFreeze = Duty cycle of evaporator fan motor for freezerDG = Degradation factor of compressor COPCOPcooler = Coefficient of performance of compressor in the coolerCOPfreezer= Coefficient of performance of compressor in the freezerPctCooler = Percentage of walk-in coolers in stores vs. total of freezers and coolersHR = Operating hours per yearTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 40 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 42 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 38 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 39: Variables for High-Efficiency Evaporator Fan MotorVariableTypeValueSourceWbaseFixedDefault REF _Ref275556527 \h Table 341Table 343Nameplate Input WattageEDC Data GatheringWeeVariableDefault REF _Ref275556527 \h Table 341Table 343Nameplate Input WattageEDC Data GatheringLFFixed0.91DCEvapCoolFixed100%2DCEvapFreezeFixed94.4%2DGFixed0.983COPcoolerFixed2.51COPfreezerFixed1.31PctCoolerFixed69%3HRFixed8,2732Sources:PSC of Wisconsin, Focus on Energy Evaluation, Business Programs: Deemed Savings Manual V1.0, p. 4-103 to 4-106.Efficiency Vermont, Technical Reference Manual 2009-54, 12/08. Hours of operation accounts for defrosting periods where motor is not operating.PECI presentation to Regional Technical Forum (RTF) as part of the Northwest Power & Conservation Council, Energy Smart March 2009 SP to ECM – 090223.ppt. Accessed from RTF website on September 7, 2010.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 41 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 43 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 39 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 40: Variables for HE Evaporator Fan MotorMotor CategoryWeighting Number (population)2Motor Output WattsSP Efficiency1,2SP Input WattsPSC Efficiency3PSC Input WattsECM Efficiency1ECM Input Watts1/40 HP (16-23 watts) (Using 19.5 watt as industry average)25%19.521%9341%4866%30 1/20 HP (~37 watts)11.5%3726%14241%9066%56 1/15 HP (~49 watts)63.5%4926%19141%12066%75Sources:Regional Technical Forum (RTF) as part of the Northwest Power & Conservation Council, Deemed Measures List. Grocery Display Case ECM, FY2010, V2. Accessed from RTF website: on July 30, 2010Regional Technical Forum (RTF) as part of the Northwest Power & Conservation Council, Deemed Measures List. Deemed MeasuresV26 _walkinevapfan. Provided by Adam Hadley (adam@). Should be made available on RTF website Smith New Product Notification. I-motor 9 & 16 Watt. Stock Numbers 9207F2 and 9208F2. Web address: . Accessed July 30, 2010.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 42 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 44 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 40 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 41: PSC to ECM Deemed SavingsMeasureWbase(PSC)Wee(ECM)LFDCEvapDGCOP per case TempDemand Impact (kW)Energy Impact (kWh)Cooler: PSC to ECM:1/40 HP (16-23 Watt)48300.9100%0.982.50.0228189Cooler: PSC to ECM:1/20 HP (37 Watt)90560.9100%0.982.50.0431356Cooler: PSC to ECM:1/15 HP (49 Watt)120750.9100%0.982.50.0570472Freezer: PSC to ECM:1/40 HP (16-23 Watt)48300.994.4%0.981.30.0273226Freezer: PSC to ECM:1/20 HP (37 Watt)90560.994.4%0.981.30.0516427Freezer: PSC to ECM:1/15 HP (49 Watt)120750.994.4%0.981.30.0682565Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 43 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 45 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 41 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 42: Shaded Pole to ECM Deemed SavingsMeasureWbase(Shaded Pole)Wee(ECM)LFDCEvapDGCOP per case TempDemand Impact (kW)Energy Impact (kWh)Cooler: Shaded Pole to ECM:1/40 HP (16-23 Watt)93300.9100%0.982.50.0798661Cooler: Shaded Pole to ECM:1/20 HP (37 Watt)142560.9100%0.982.50.1090902Cooler: Shaded Pole to ECM:1/15 HP (49 Watt)191750.9100%0.982.50.14701,216Freezer: Shaded Pole to ECM:1/40 HP (16-23 Watt)85300.994.4%0.981.30.0834790Freezer: Shaded Pole to ECM:1/20 HP (37 Watt)142560.994.4%0.981.30.13041,079Freezer: Shaded Pole to ECM:1/15 HP (49 Watt)191750.994.4%0.981.30.17591,455Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 44 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 46 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 42 STYLEREF 1 \s 5 SEQ Table \* ARABIC \s 1 43: Default High-Efficiency Evaporator Fan Motor Deemed SavingsMeasureCooler Weighted Demand Impact (kW)Cooler Weighted Energy Impact (kWh)Freezer Weighted Demand Impact (kW)Freezer Weighted Energy Impact (kWh)Default Demand Impact (kW)Default Energy Impact (kWh)PSC to ECM0.04693880.05614640.0499413Shaded Pole to ECM0.12581,0410.15061,2460.13351,105Measure Life15 yearsSources:“ActOnEnergy; Business Program-Program Year 2, June, 2009 through May, 2010. Technical Reference Manual, No. 2009-01.” Published 12/15/2009. “Efficiency Maine; Commercial Technical Reference User Manual , No. 2007-1.” Published 3/5/07.Regional Technical Forum (RTF) as part of the Northwest Power & Conservation Council, Deemed Measures List. Deemed MeasuresV26 _walkinevapfan. Provided by Adam Hadley (adam@). Should be made available on RTF website HYPERLINK "" STAR Office EquipmentAlgorithmsThe general form of the equation for the ENERGY STAR Office Equipment measure savings’ algorithms is:Number of Units X Savings per UnitTo determine resource savings, the per unit estimates in the algorithms will be multiplied by the number of units. Per unit savings are primarily derived from the June 2010 release of the ENERGY STAR calculator for office equipment.ENERGY STAR ComputerkWhElectricity Impact (kWh) = ESavCOMkWpeakDemand Impact (kW) = DSavCOM x CFCOMENERGY STAR Fax MachinekWhElectricity Impact (kWh) = ESavFAXkWpeakDemand Impact (kW) = DSavFAX x CFFAXENERGY STAR CopierkWhElectricity Impact (kWh) = ESavCOPkWpeakDemand Impact (kW) = DSavCOP x CFCOPENERGY STAR PrinterkWhElectricity Impact (kWh) = ESavPRIkWpeakDemand Impact (kW) = DSavPRI x CFPRIENERGY STAR MultifunctionkWhElectricity Impact (kWh) = ESavMULkWpeakDemand Impact (kW)= DSavMUL x CFMULENERGY STAR MonitorkWhElectricity Impact (kWh) = ESavMONkWpeakDemand Impact (kW) = DSavMON x CFMONDefinition of TermsESavCOM = Electricity savings per purchased Energy StarENERGY STAR computer.DSavCOM = Summer demand savings per purchased Energy StarENERGY STAR computer.ESavFAX = Electricity savings per purchased Energy StarENERGY STAR fax machine.DSavFAX = Summer demand savings per purchased Energy StarENERGY STAR fax machine.ESavCOP= Electricity savings per purchased Energy StarENERGY STAR copier.DSavCOP = Summer demand savings per purchased Energy StarENERGY STAR copier.ESavPRI= Electricity savings per purchased Energy StarENERGY STAR printer.DSavPRI = Summer demand savings per purchased Energy StarENERGY STAR printer.ESavMUL = Electricity savings per purchased Energy StarENERGY STAR multifunction machine.DSavMUL = Summer demand savings per purchased Energy StarENERGY STAR multifunction machine.ESavMON = Electricity savings per purchased Energy StarENERGY STAR monitor..DSavMON = Summer demand savings per purchased Energy StarENERGY STAR monitor.CFCOM, CFFAX, CFCOP, CFPRI, CFMUL, CFMON = Summer demand coincidence factor. The coincidence of average office equipment demand to summer system peak equals 1 for demand impacts for all office equipment reflecting embedded coincidence in the DSav factor.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 45 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 47: Energy StarENERGY STAR Office Equipment - ReferencesComponentTypeValueSourcesESavCOMESavFAXESavCOPESavPRIESavMULESavMONFixedsee REF _Ref275905692 \h Table 346Table _ below1DSavCOMDSavFAXDSavCOPDSavPRIDSavMULDSavMONFixedsee REF _Ref275905692 \h Table 346Table _ below2CFCOM,CFFAX,CFCOP,CFPRI,CFMUL,CFMONFixed1.0, 1.0, 1.0, 1.0, 1.0, 1.03Sources:Energy StarENERGY STAR Office Equipment Savings Calculator (Calculator updated: June 2010). Default values were used.Using a commercial office equipment load shape, the percentage of total savings that occur during the top 100 system hours was calculated and multiplied by the energy savings.Coincidence factors already embedded in summer peak demand reduction estimates.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 48: Residential Energy and Demand Savings ValuesMeasureEnergy Savings (ESav)Demand Savings (DSav)Computer 77 kWh0.010 kWFax Machine (laser)78 kWh0.0105 kWCopier (monochrome) 1-25 images/min73 kWh0.0098 kW 26-50 images/min151 kWh0.0203 kW 51+ images/min162 kWh0.0218 kWPrinter (laser, monochrome) 1-10 images/min26 kWh0.0035 kW 11-20 images/min73 kWh0.0098 kW 21-30 images/min104 kWh0.0140 kW 31-40 images/min156 kWh0.0210 kW 41-50 images/min133 kWh0.0179 kW 51+ images/min329 kWh0.0443 kWMultifunction (laser, monochrome) 1-10 images/min78 kWh0.0105 kW 11-20 images/min147 kWh0.0198 kW 21-44 images/min253 kWh0.0341 kW 45-99 images/min422 kWh0.0569 kW 100+ images/min730 kWh0.0984 kWMonitor14 kWh0.0019 kWSources: ENERGYSTAR office equipment calculatorsTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 49: Commercial Energy and Demand Savings ValuesTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 46: ES Office Equipment Energy and Demand Savings ValuesMeasureEnergy Savings (ESav)Demand Savings (DSav)Computer 133 kWh0.018 kWFax Machine (laser)78 kWh0.0105 kWCopier (monochrome) 1-25 images/min73 kWh0.0098 kW 26-50 images/min151 kWh0.0203 kW 51+ images/min162 kWh0.0218 kWPrinter (laser, monochrome) 1-10 images/min26 kWh0.0035 kW 11-20 images/min73 kWh0.0098 kW 21-30 images/min104 kWh0.0140 kW 31-40 images/min156 kWh0.0210 kW 41-50 images/min133 kWh0.0179 kW 51+ images/min329 kWh0.0443 kWMultifunction (laser, monochrome) 1-10 images/min78 kWh0.0105 kW 11-20 images/min147 kWh0.0198 kW 21-44 images/min253 kWh0.0341 kW 45-99 images/min422 kWh0.0569 kW 100+ images/min730 kWh0.0984 kWMonitor15 kWh0.0020 kWSources: ENERGYSTAR office equipment calculatorsEffective Useful LifeTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 47 STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 50: Effective Useful LifeEquipmentResidential Life (years)Commercial Life (years)Computer44Monitor54Fax44Multifunction Device66Printer55Copier66Sources: ENERGYSTAR office equipment calculatorsSmart Strip Plug OutletsSmart Strips are power strips that contain a number of controlled sockets with at least one uncontrolled socket. When the appliance that is plugged into the uncontrolled socket is turned off, the power strips then shuts off the items plugged into the controlled sockets. Qualified power strip must automatically turn off when equipment is unused / unoccupied.EligibilityThis protocol documents the energy savings attributed to the installation of smart strip plugs. The most likely area of application is within commercial spaces such as isolated workstations and computer systems with standalone printers, scanners or other major peripherals that are not dependent on an uninterrupted network connection (e.g. routers and modems). AlgorithmsThe DSMore Michigan Database of Energy Efficiency Measures performed engineering calculations using standard standby equipment wattages for typical computer and TV systems and idle times. This commercial protocol will use the computer system assumptions except it will utilize a lower idle time for commercial office use. The computer system usage is assumed to be 10 hours per day for 5 workdays per week. The average daily idle time including the weekend (2 days of 100% idle) is calculated as follows:(Hours per week – (Workdays x daily computer usage))/days per week = average daily commercial computer system idle time(168 hours – (5 x 10 hours))/7 days = 16.86 hours The energy savings and demand reduction were obtained through the following calculations:kWh kWh Savings=kWcomp×Hrcomp×365=123.69kWh (rounded to 124kWh)kWpeak kW Demand Reduction=CF×kWcomp=0.0101 kWDefinition of TermsThe parameters in the above equation are listed below.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 48: Smart Strip Calculation AssumptionsParameterComponentTypeValueSource kWcompIdle kW of computer systemFixed0.02011HrcompDaily hours of computer idle timeFixed16.861CFCoincidence FactorFixed0.501Sources:DSMore Michigan Database of Energy Efficiency MeasuresDeemed SavingskWh = 124 kWhkWpeak = 0.0101 kWMeasure LifeTo ensure consistency with the annual savings calculation procedure used in the DSMore MI database, the measure of 5 years is taken from DSMore.Evaluation ProtocolsThe most appropriate evaluation protocol for this measure is verification of installation coupled with assignment of stipulated energy savings.Beverage Machine ControlsThis measure is intended for the addition of control systems to existing, non-ENERGY STAR, beverage vending machines. The applicable machines contain refrigerated non-perishable beverages that are kept at an appropriate temperature. The control systems are intended to reduce energy consumption due to lighting and refrigeration during times of lower customer sales. Typical control systems contain a passive infrared occupancy sensor to shut down the machine after a period of inactivity in the area. The compressor will power on one to three hour intervals sufficient to maintain beverage temperature, and when powered on at any time will be allowed to complete at least one cycle to prevent excessive wear and tear.The baseline equipment is taken to be an existing standard refrigerated beverage vending machine that does not contain control systems to shut down the refrigeration components and lighting during times of low customer use. AlgorithmsEnergy savings are dependent on decreased machine lighting and cooling loads during times of lower customer sales. The savings will be dependent on the machine environment, noting that machines placed in locations such as a day-use office will result in greater savings than those placed in high-traffic areas such as hospitals that operate around the clock. The algorithm below takes into account varying scenarios and can be taken as representative of a typical application. kWh = kWhbase * EkWpeak= 0There are no peak demand savings because this measure is aimed to reduce demand during times of low beverage machine use, which will typically occur during off-peak hours. Definition of TermskWhbase = baseline annual beverage machine energy consumption (kWh/year)E = efficiency factor due to control system, which represents percentage of energy reduction from baseline Energy Savings CalculationsThe decrease in energy consumption due to the addition of a control system will depend on the number or hours per year during which lighting and refrigeration components of the beverage machine are powered down. The average decrease in energy use from refrigerated beverage vending machines with control systems installed is 46%,,,. It should be noted that various studies found savings values ranging between 30-8065%, most likely due to differences in customer occupation. The default baseline energy consumption and default energy savings are shown in REF _Ref271123746 \h \* MERGEFORMAT Table 349. The default energy savings were derived by applying a default efficiency factor of Edefault = 46% to the energy savings algorithm above. Where it is determined that the default efficiency factor (E) or default baseline energy consumption (kWhbase) is not representative of specific applications, EDC data gathering can be used to determine an application specific energy savings factor (E), and/or baseline energy consumption (kWhbase), for use in the Energy Savings algorithm.Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 49: Beverage Machine Controls Energy SavingsMachine Can CapacityDefault Baseline Energy Consumption (kWhbase) (kWh/year)Default Energy Savings (ΔkWh); (kWh/year)< 5003,1131,4325003,9161,8016003,5511,6337004,1981,931800+3,3181,526Measure LifeMeasure life = 5 years,Further Reference DataU.S. Department of Energy Appliances and Commercial Equipment Standards, HYPERLINK "" Ice MachinesThis measure applies to the installation of a high-efficiency ice machine as either a new item or replacement for an existing unit. The machine must be air-cooled to qualify, which can include self-contained, ice-making heads, or remote-condensing units. The machine must conform with the minimum ENERGY STAR efficiency requirements, which are equivalent to the CEE Tier 2 specifications for high-efficiency commercial ice machines. A qualifying machine must also meet the ENERGY STAR requirements for water usage given under the same criteria. The baseline equipment is taken to be a unit with efficiency specifications less than or equal to CEE Tier 1 equipment.AlgorithmsThe energy savings are dependent on machine type and capacity of ice produced on a daily basis. A machine’s capacity is generally reported as an ice harvest rate, or amount of ice produced each day. kWh = kWhbase- kWhhe100×H×365×DkWpeak= ?kWh8760*D ×CFDefinition of TermskWhbase = baseline ice machine energy usage per 100 lbs of ice (kWh/100lbs)kWhhe = high-efficiency ice machine energy usage per 100 lbs of ice (kWh/100lbs)H = Ice harvest rate per 24 hrs (lbs/day)D = duty cycle of ice machine expressed as a percentage of time machine produces ice.365 = (days/year)100 = conversion to obtain energy per pound of ice (lbs/100lbs)8760 = (hours/year)CF = Summer peak coincidence factorThe reference values for each component of the energy impact algorithm are shown in REF _Ref271184039 \h \* MERGEFORMAT Table 350. A default duty cycle (D) is provided as based on referenced values from several studies, however, EDC data gathering may be used to adjust the duty cycle for custom applications. Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 50: Ice Machine Reference values for algorithm componentsTermTypeValueSourcekWhbaseVariable REF _Ref270494188 \h \* MERGEFORMAT Table 3511kWhheVariable REF _Ref270494188 \h \* MERGEFORMAT Table 3512HVariableManufacturer SpecsEDC Data GatheringDVariableDefault = 0.43CustomEDC Data GatheringIce maker typeVariableManufacturer SpecsEDC Data GatheringCFFixed0.77 4Sources:Specifications for CEE Tier 1 ice machines.Specifications for CEE Tier 2 ice machines.State of Ohio Energy Efficiency Technical Reference Manual cites a default duty cycle of 40% as a conservative value. Other studies range as high as 75%.State of Ohio Energy Efficiency Technical Reference Manual cites a CF = 0.772 as adopted from the Efficiency Vermont TRM. Assumes CF for ice machines is similar to that for general commercial refrigeration equipment.Energy Savings CalculationsIce machine energy usage levels are dependent on the ice harvest rate (H), and are calculated using CEE specifications as shown in REF _Ref270494188 \h \* MERGEFORMAT Table 351. The default energy consumption for the baseline ice machine (kWhbase) is calculated using the formula for CEE Tier 1 specifications, and the default energy consumption for the high-efficiency ice machine (kWhhe) is calculated using the formula for CEE Tier 2 specifications. The two energy consumption values are then applied to the energy savings algorithm above. Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 51: Ice Machine Energy UsageIce machine typeIce harvest rate (H)(lbs/day)Baseline energy use per 100 lbs of ice(kWhbase)High-efficiency energy use per 100 lbs of ice(kWhhe)Ice-Making Head<45010.26 – 0.0086*H9.23 – 0.0077*H≥4506.89 – 0.0011*H6.20 – 0.0010*HRemote-Condensing w/out remote compressor<10008.85 – 0.0038*H8.05 – 0.0035*H≥10005.14.64Remote-Condensing with remote compressor<9348.85 – 0.0038*H8.05 – 0.0035*H≥9345.34.82Self-Contained<17518 – 0.0469*H16.7 – 0.0436*H≥1759.89.11Measure LifeMeasure life = 10 years.Further Reference DataKaras, A., Fisher, D. (2007), A Field Study to Characterize Water and Energy Use of Commercial Ice-Cube Machines and Quantify Saving Potential, Food Service Technology Center, December 2007, HYPERLINK "" Products, How to Buy an Energy-Efficient Commercial Ice Machine, U.S. Department of Energy, Energy Efficiency and Renewable Energy, accessed August 2010 at HYPERLINK "" and Ceiling InsulationWall and ceiling insulation is one of the most important aspects of the energy system of a building. Insulation dramatically minimizes energy expenditure on heating and cooling. Increasing the R-value of wall insulation above building code requirements generally lowers heating and cooling costs. Incentives are offered with regard to increases in R-value rather than type, method, or amount of insulation.An R-value indicates the insulation’s resistance to heat flow – the higher the R-value, the greater the insulating effectiveness. The R-value depends on the type of insulation and its material, thickness, and density. When calculating the R-value of a multilayered installation, add the R-values of the individual layers. EligibilityThis measure applies to non-residential buildings heated and/or cooled using electricity. Existing construction buildings are required to meet or exceed the code requirement. New construction buildings must exceed the code requirement. Eligibility may vary by PA EDC; savings from chiller-cooled buildings are not included. AlgorithmsThe savings depend on four main factors: baseline condition, heating system type and size, cooling system type and size, and location. The algorithm for Central AC and Air Source Heat Pumps (ASHP) is as follows Ceiling InsulationkWh= kWhcool + kWhheatkWhcool= (A X CDD X 24)/(EER X 1000) X (1/Ri – 1/Rf)kWhheat= (A X HDD X 24)/(COP X 3413) X (1/Ri – 1/Rf)kWpeak = kWhcool / EFLHcool X CFWall InsulationkWh= kWhcool + kWhheatkWhcool = (A X CDD X 24)/(EER X 1000) X (1/Ri – 1/Rf)kWhheat = (A X HDD X 24)/(COP X 3413) X (1/Ri – 1/Rf)kWpeak = kWhcool / EFLHcool X CFDefinition of TermsA= area of the insulation that was installed in square feetHDD = heating degree days with 65 degree baseCDD = cooling degree days with a 65 degree base24 = hours per day1000 = W per kW3413 = Btu per kWhRi = the R-value of the insulation and support structure before the additional insulation is installedRf = the total R-value of all insulation after the additional insulation is installedEFLH = effective full load hoursCF = coincidence factorEER = efficiency of the cooling systemCOP = efficiency of the heating systemTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 52: Non-Residential Insulation – Values and ReferencesComponentTypeValuesSourcesAVariableApplicationAEPS Application; EDC Data GatheringHDD FixedAllentown = 5318Erie = 6353Harrisburg = 4997Philadelphia = 4709Pittsburgh = 5429Scranton = 6176Williamsport = 56511CDDFixedAllentown = 787Erie = 620Harrisburg = 955Philadelphia = 1235Pittsburgh = 726Scranton = 611Williamsport = 709124Fixed24n/a1000Fixed1000n/aCeiling RiExisting:VariableNew Construction: FixedFor new construction buildings and when variable is unknown for existing buildings: See REF _Ref272826219 \h \* MERGEFORMAT Table 353 and REF _Ref275942945 \h \* MERGEFORMAT Table 354 for values by building typeAEPS Application; EDC Data Gathering; 2; 4Wall RiExisting:VariableNew Construction: FixedFor new construction buildings and when variable is unknown for existing buildings: See REF _Ref272826219 \h \* MERGEFORMAT Table 353 and REF _Ref275942945 \h \* MERGEFORMAT Table 354 for values by building typeAEPS Application; EDC Data Gathering; 3; 4RfVariableAEPS Application; EDC Data Gathering; EFLHcoolFixedSee REF _Ref274835464 \h \* MERGEFORMAT Table 3565CFFixed67%5EERFixedSee REF _Ref275942456 \h Table 3556, 7COPFixedSee REF _Ref275942456 \h Table 3556, 7 Sources:U.S. Department of Commerce. Climatography of the United States No. 81 Supplement No. 2. Annual Degree Days to Selected Bases 1971 – 2000. Scranton uses the values for Wilkes-Barre. HDD were adjusted downward to account for business hours. CDD were not adjusted for business hours, as the adjustment resulted in an increase in CDD and so not including the adjustment provides a conservative estimate of energy savings.The initial R-value for a ceiling for existing buildings is based on the EDC eligibility requirement that at least R-11 be installed and that the insulation must meet at least IECC 2009 code. The initial R-value for new construction buildings is based on IECC 2009 code for climate zone 5.The initial R-value for a wall assumes that there was no existing insulation, or that it has fallen down resulting in an R-value equivalent to that of the building materials. Building simulation modeling using DOE-2.2 model (eQuest) was performed for a building with no wall insulation. The R-value is dependent upon the construction materials and their thickness. Assumptions were made about the building materials used in each sector. 2009 International Energy Conservation Code. Used climate zone 5 which covers the majority of Pennsylvania. The R-values required by code were used as inputs in the eQuest building simulation model to calculate the total R-value for the wall including the building materials.EFLH values and coincidence factors for HVAC peak demand savings calculations come from the Pennsylvania Technical Reference Manual. June 2010. Baseline values from ASHRAE 90.1-2004 for existing buildings. Baseline values from IECC 2009 for new construction buildings. Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 53: Ceiling R-Values by Building TypeBuilding TypeCeiling Ri-Value (New Construction)Ceiling Ri-Value (Existing)Large OfficeLarge RetailLodgingHealthEducationGrocery209Small OfficeWarehouse24.413.4Small RetailRestaurantConvenience Store209Table STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 54: Wall R-Values by Building TypeBuilding TypeWall Ri-Value (New Construction)Wall Ri-Value(Existing)Large Office141.6Small OfficeLarge RetailSmall RetailConvenience Store143.0LodgingHealthEducationGrocery132.0Restaurant143.2Warehouse142.5<5.4 tons10 SEER/8.7 EERn/a13 SEER/11.3 EERn/a>5.4 to 11.25 tons10.1 EERn/a11.2 EERn/a>11.25 to 20 tons9.5 EERn/a11.0 EERn/a>20 to 63.33 tons9.3 EERn/a10.0 EERn/a>63.33 tons9 EERn/a9.7 EERn/aTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 55: HVAC Baseline Efficiencies for Non-Residential BuildingsExistingNew ConstructionEquipment Type and CapacityCooling BaselineHeating BaselineCooling BaselineHeating BaselineAir-Source Air Conditioners< 5.41 tons10.0 SEERN/A13.0 SEERN/A> 5.41 tons and <11.25 tons10.3 EERN/A11.2 EERN/A> 11.25 tons and < 20.00 tons9.7 EERN/A11.0 EERN/A> 20.00 tons and < 63.33 tons9.5 EERN/A10.0 EERN/A> 63.33 tons9.2 EERN/A9.7 EERN/AWater-Source and Evaporatively-Cooled Air Conditioners< 5.41 tons12.1 EERN/A12.1 EERN/A> 5.41 tons and < 11.25 tons11.5 EERN/A11.5 EERN/A> 11.25 tons and < 20.00 tons11.0 EERN/A11.0 EERN/A> 20.00 tons11.0 EERN/A11.5 EERN/AAir-Source Heat Pumps < 5.41 tons:10.0 SEER6.8 HSPF13 SEER7.7 HSPF> 5.41 tons and < 11.25 tons10.1 EER3.2 COP11.0 EER3.3 COP> 11.25 tons and < 20.00 tons 9.3 EER3.1 COP10.6 EER3.2 COP> 20.00 tons9.0 EER3.1 COP9.5 EER3.2 COPWater-Source Heat Pumps < 1.42 tons 11.2 EER4.2 COP11.2 EER4.2 COP> 1.42 tons and < 5.41 tons12.0 EER4.2 COP12.0 EER4.2 COPGround Water Source Heat Pumps < 11.25 tons16.2 EER3.6 COP16.2 EER3.6 COPGround Source Heat Pumps < 11.25 tons13.4 EER3.1 COP13.4 EER3.1 COPPackaged Terminal Systems (Replacements)PTAC (cooling)10.9 - (0.213 x Cap / 1000) EERN/A10.9 - (0.213 x Cap / 1000) EERN/APTHP (cooling) 10.8 - (0.213 x Cap / 1000) EER2.9 - (0.213 x Cap / 1000) COP10.8 - (0.213 x Cap / 1000) EER2.9 - (0.213 x Cap / 1000) COPTable STYLEREF 1 \s 3 SEQ Table \* ARABIC \s 1 56: Cooling EFLH for Erie, Harrisburg, and PittsburghSpace TypeErieHarris-burgPitts-burghWilliams-portPhila-delphiaScran-tonArena/Auditorium/Convention Center332640508454711428College: Classes/Administrative380733582520815490Convenience Stores6711,2931,0269171,436864Dining: Bar Lounge/Leisure5039697696881,077648Dining: Cafeteria / Fast Food6771,3041,0359251,449872Dining: Restaurants5039697696881,077648Gymnasium/Performing Arts Theatre380733582520815490Hospitals/Health care7701,4831,1771,0521,648992Industrial: 1 Shift/Light Manufacturing401773613548859517Industrial: 2 Shift5451,0508337451,166702Industrial: 3 Shift6901,3301,0559441,478889Lodging: Hotels/Motels/Dormitories418805638571894538Lodging: Residential418805638571894538Multi-Family (Common Areas)7691,4821,1761,0521,647991Museum/Library4699057186421,005605Nursing Homes6301,2139638611,348811Office: General/Retail4699057186421,005605Office: Medical/Banks4699057186421,005605Parking Garages & Lots5179977917071,107666Penitentiary6021,1609208231,289775Police/Fire Stations (24 Hr)7691,4821,1761,0521,647991Post Office/Town Hall/Court House4699057186421,005605Religious Buildings/Church332640508454711428Retail4939507546741,055635Schools/University350674535478749451Warehouses (Not Refrigerated)382735583522817492Warehouses (Refrigerated)382735583522817492Waste Water Treatment Plant6901,3301,0559441,478889Measure Life15 yearsCapped based on the requirements of the Pennsylvania Technical Reference Manual (June 2010). This value is less than that used by other jurisdictions for insulation.Demand Response ProgramsCommercial and Industrial ApplicationsEach commercial and industrial application will be treated independently as a custom program. An application must be submitted, containing adequate documentation fully describing the energy efficiency measures installed or proposed and an explanation of how the installed facilities qualify for A E Cs. Each program application will be required to include:Program NameProgram Utility CompanyProgram Location (s)Type of facilities in which the measures, systems, processes, or strategies will be implementedCustomer class and end-use servedEstimated demand reduction value (kW) per measure including supporting documentation (i.e. engineering estimates or documentation of verified savings from comparable projects)Estimated energy reduction value (kWh) throughout the yearThe date by which commercial operation is expectedThe required application information is the minimum requirement for submitting a program. If a submitter relies on PJM protocols for participation in the PJM market, the PJM methodology will be accepted as a reporting method. Residential ApplicationsAlgorithmsThe general form of the equation for the residential demand response measure savings algorithms is:Total Savings = Number of Units X Savings per UnitTo determine resource savings, the per unit estimates in the algorithms will be multiplied by the number of demand response units. The number of units will be determined by the program. Per unit savings estimates will be estimated by each specific measure. Direct Load Control (Air Conditioning Cycling and Pool Pump Load Control)Electricity Impact (kWh) = ESav X Units X Hours Demand Impact (kW) = ESav X Units Definition of TermsESav = Energy Saved in One Hour in kWUnits = Number of Units in the ProgramHours = Number or hours throughout the year the measure operatesTable STYLEREF 1 \s 6 SEQ Table \* ARABIC \s 1 1: Variables for Residential Applications of Demand Response ProgramsComponentTypeValueSourcesESavFixedAir conditioning Cycling = 0.72 kWPool Pump Load Control = 0.75 kW1UnitsVariableAEPS Application; EDC Data GatheringHoursVariableAEPS Application; EDC Data GatheringThis Page Intentionally Left BlankSources:Public Service Electric and Gas Company. Petition for Approval of Demand Response Programs. August 5, 2008.AppendicesAppendix A: Measure LivesMeasure Lives Used in Cost-Effectiveness ScreeningFebruary 2008Program/Measure*For the purpose of calculating the total Resource Cost Test for Act 129, measure cannot claim savings for more than fifteen years.MeasureLifeRESIDENTIAL PROGRAMSEnergy StarENERGY STAR AppliancesEnergy StarENERGY STAR Refrigerator post-200113Energy StarENERGY STAR Refrigerator 200113Energy StarENERGY STAR Dishwasher 11Energy StarENERGY STAR Clothes Washer11Energy StarENERGY STAR Dehumidifier12Energy StarENERGY STAR Room Air Conditioners 10Energy StarENERGY STAR LightingCompact Fluorescent Light Bulb 6.4Recessed Can Fluorescent Fixture20*Torchieres (Residential)10Fixtures Other20*Energy StarENERGY STAR WindowsWINDOW -heat pump20*WINDOW -gas heat with central air conditioning20*WIN-oil heat/CAC20WIN-oil No CAC20WINDOW – electric heat without central air conditioning20*WINDOW – electric heat with central air conditioning20*Refrigerator/Freezer RetirementRefrigerator/Freezer retirement8Residential New ConstructionSingle Family - gas heat with central air conditioner20*Single Family - oil heat with central air conditioner20*Single Family - all electric20*Multiple Single Family (Townhouse) – gas heat with central air conditioner20*Multiple Single Family (Townhouse) – oil heat with central air conditioner20*Multiple Single Family (Townhouse) - all electric20*Multi-Family – gas heat with central air conditioner20*Multi-Family - oil heat with central air conditioner20*Multi-Family - all electric20*Energy StarENERGY STAR Clothes Washer11Recessed Can Fluorescent Fixture20*Fixtures Other20*Efficient Ventilation Fans with Timer10Residential Electric HVACCentral Air Conditioner SEER 1314Central Air Conditioner SEER 1414Air Source Heat Pump SEER 1312Air Source Heat Pump SEER 1412Central Air Conditioner proper sizing/install14Central Air Conditioner Quality Installation Verification14Central Air Conditioner Maintenance7Central Air Conditioner duct sealing14Air Source Heat Pump proper sizing/install12Energy StarENERGY STAR Thermostat (Central Air Conditioner)15Energy StarENERGY STAR Thermostat (Heat Pump)15Ground Source Heat Pump30*Central Air Conditioner SEER 1514Air Source Heat Pump SEER 1512Home Performance with ENERGY STARBlue Line Innovations – PowerCost MonitorTM5NON-RESIDENTIAL PROGRAMSC&I ConstructionCommercial Lighting (Non-SSL) — New15Commercial Lighting (Non-SSL) — Remodel/Replacement15Commercial Lighting (SSL – 25,000 hours) — New6Commercial Lighting (SSL – 30,000 hours) — New7Commercial Lighting (SSL – 35,000 hours) — New8Commercial Lighting (SSL – 40,000 hours) — New10Commercial Lighting (SSL – 45,000 hours) — New11Commercial Lighting (SSL – 50,000 hours) — New12Commercial Lighting (SSL – 55,000 hours) — New13Commercial Lighting (SSL – 60,000 hours) — New14Commercial Lighting (SSL – ≥60,000 hours) — New15*Commercial Lighting (SSL – 25,000 hours) — Remodel/Replacement6Commercial Lighting (SSL – 30,000 hours) — Remodel/Replacement7Commercial Lighting (SSL – 35,000 hours) — Remodel/Replacement8Commercial Lighting (SSL – 40,000 hours) — Remodel/Replacement10Commercial Lighting (SSL – 45,000 hours) — Remodel/Replacement11Commercial Lighting (SSL – 50,000 hours) — Remodel/Replacement12Commercial Lighting (SSL – 55,000 hours) — Remodel/Replacement13Commercial Lighting (SSL – 60,000 hours) — Remodel/Replacement14Commercial Lighting (SSL – ≥60,000 hours) — Remodel/Replacement15*Commercial Custom — New18*Commercial Chiller Optimization18*Commercial Unitary HVAC — New - Tier 115Commercial Unitary HVAC — Replacement - Tier 115Commercial Unitary HVAC — New - Tier 215Commercial Unitary HVAC — Replacement Tier 215Commercial Chillers — New20*Commercial Chillers — Replacement20*Commercial Small Motors (1-10 horsepower) — New or Replacement20*Commercial Medium Motors (11-75 horsepower) — New or Replacement20*Commercial Large Motors (76-200 horsepower) — New or Replacement20*Commercial Variable Speed Drive — New15Commercial Variable Speed Drive — Retrofit15Commercial Comprehensive New Construction Design18*Commercial Custom — Replacement18*Industrial Lighting — New15Industrial Lighting — Remodel/Replacement15Industrial Unitary HVAC — New - Tier 115Industrial Unitary HVAC — Replacement - Tier 115Industrial Unitary HVAC — New - Tier 215Industrial Unitary HVAC — Replacement Tier 215Industrial Chillers — New20*Industrial Chillers — Replacement20*Industrial Small Motors (1-10 horsepower) — New or Replacement20*Industrial Medium Motors (11-75 horsepower) — New or Replacement20*Industrial Large Motors (76-200 horsepower) — New or Replacement20*Industrial Variable Speed Drive — New15Industrial Variable Speed Drive — Retrofit15Industrial Custom — Non-Process18*Industrial Custom — Process10Building O&MO&M savings3Appendix B: Relationship between Program Savings and Evaluation SavingsThere is a distinction between activities required to conduct measurement and verification of savings at the program participant level and the activities conducted by program evaluators and the SWE to validate those savings. However, the underlying standard for the measurement of the savings for both of these activities is the measurement and verification protocols approved by the PA PUC. These protocols are of three different types:TRM specified protocols for standard measures, originally approved in the May 2009 order adopting the TRM, and updated annually thereafterInterim Protocols for standard measures, reviewed and recommended by the SWE and approved for use by the Director of the CEEP, subject to modification and incorporation into succeeding TRM versions to be approved by the PA PUCCustom Measure Protocols reviewed and recommended by the SWE and approved for use by the Director of the CEEPThese protocols are to be uniform and used to measure and calculate savings throughout Pennsylvania. The TRM protocols are comprised of Deemed Measures and Partially Deemed Measures. Deemed Measures specify saving per energy efficiency measure and require verifying that the measure has been installed, or in cases where that is not feasible, that the measure has been purchased by a utility customer. Partially Deemed Measures require both verification of installation and the measurement or quantification of open variables in the protocol.Stipulated and deemed numbers are valid relative to a particular classification of “standard” measures. In the determination of these values, a normal distribution of values should have been incorporated. Therefore, during the measurement and verification process, participant savings measures cannot be arbitrarily treated as “custom measures” if the category allocation is appropriate. Utility evaluators and the SWE will adjust the savings reported by program staff based on the application of the PA PUC approved protocols to a sample population and realization rates will be based on the application of these same standards. To the extent that the protocols or deemed values included in these protocols require modification, the appropriate statewide approval process will be utilized. These changes will be prospective.Appendix C: Lighting Inventory FormAudit and Design Tool- Lighting Inventory Form- Table of Standard Wattages- Fixture Code Legend and NotesAudit and Design ToolAppendix D: Motor & VFD Inventory FormAudit and Design ToolMotor and Variable Frequency Drive Inventory FormAudit and Design Tool ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- welcome to the lackawanna historical society
- collected quotations angelfire
- international guidebook
- bell atlantic pennsylvania inc
- 87 transportation department of
- fus 0435 p 00981628 o citizens tel co of new
- masrdsc6 delaware street rods
- author s note the day the earth caved in
- college of arts and sciences the university of scranton
- magicmail server login page
Related searches
- state of new jersey department of treasury
- city of new haven board of education
- state of new jersey department of education
- state of new hampshire department of education
- department of education of new jersey
- state of new york department of insurance
- state of new jersey sec of state
- state of new jersey department of labor
- state of new jersey certificate of formation
- state of new hampshire dept of education
- state of new york division of corporations
- state of new york department of state