CHKL-OCE 2 - Oracle



CHKL-OCE 2.0: OCE Oracle 10gR2 Certification Checklist

|  |

|Approved by: | |

|Originator: |Richard Roddy - Senior Engineer |

|Issue Date: |22-Dec-2005 |

|Revision Number: |2.2.1 |

[pic]

To be completed in full by vendor representative:

|  |

|Engineering Bill Of Material |Configuration as Certified |

|Certification Date (Started -> Completed) |  |

|Version of Oracle Software being Certified (4 digit) |  |

|Vendor |  |

|Server Name / Model |  |

|O/S Version |  |

|OS Patches Required |  |

|Clusterware Version (+ required patches) |  |

|CFS Version | |

|# Server Nodes |  |

|CPU type (Architecture) |  |

|# CPUs per Server |  |

|Memory per Server |  |

|Network |  |

|JDK |  |

|C/C++ Compiler |  |

|Cobol Compiler (if applicable) |  |

|Fortran Compiler (if applicable) |  |

|  |  |

|[Linux] Linux Distribution |  |

|[Linux] - Linux OS Name |  |

|[Linux] - Linux OS Version Number |  |

|[Linux] - Kernel Version Number |  |

|[Linux] - Glibc Version Number |  |

|[Linux] - GCC Version Number |  |

|[Linux] - Binutils Version Number |  |

|  |  |

|Shared Storage Technology (HBA cards, FC Switch, Shared Disk) |  |

|Shared Interconnect Technology (NIC's, Switch, Protocol) |  |

|Special Software |  |

|Miscellaneous (Cables, Monitor/Keyboard/Mouse) |  |

|Miscellaneous Configuration Comments: |  |

|  |

|Support Id: |  |

|Submitted by (Vendor Contact): | |

|OCE Support Representative:  |  |

[pic]

Oracle10g OCE Certification/Validation

To be completed in full by vendor representative:

STEP 1: Pre-Installation Checks/Requirements

If there are any problems please indicate here and in the Comments Section. Send any relevant logs with the checklist.

|  |

|VERIFICATION CHECK |COMPLETED, YES or NO  |

|Verify Shared Storage is visible to all nodes (CFS and RAC testing) |  |

|Verify all kernel parameters have been tuned for Oracle |  |

|For non-Linux systems verify all Cluster Managers are running on all nodes |  |

Comments

[pic]

[pic]

[pic]

STEP 2: Software Installation Testing

This section includes various installation scenarios; all those that are relevant for the system being certified must be completed in order for certification to be awarded.

If there are any problems please indicate here and in the Comments Section. Send any relevant logs with the checklist.

|  |

|VERIFICATION CHECK |COMPLETED, YES or NO  |

|Linux x86 only, install OCFS(if applicable) |  |

|For NAS clusters verify the NFS mounts use correct NFS mount options, See NAS vendor documentation for more detail |  |

|If using raw devices, configure Oracle Cluster Registry (OCR) and if appropriate Quorum (Vote) raw devices/logical volumes on |  |

|shared storage | |

|CRS INSTALL SCENARIO #1 |Result (Pass/Fail) |

|Install Oracle Cluster Ready Services 10gR2 (10.2) => SHARED ORA_CRS_HOME => OCR/VDISK ON SHARED FS |  |

|Validate Oracle Cluster Ready Services Installation | |

|•          Check installActions logfile for errors | |

|•          Check CRS Health ($ORA_CRS_HOME/bin/crsctl check crs) | |

|•          Check CRS Resources – ONS, GSD, VIP ($ORA_CRS_HOME/bin/crs_stat –t) are all online | |

|CRS INSTALL SCENARIO #2 |Result (Pass/Fail) |

|Install Oracle Cluster Ready Services 10gR2 (10.2) => SHARED ORA_CRS_HOME => OCR/VDISK  ON NAS | |

|Validate Oracle Cluster Ready Services Installation | |

|•          Check installActions logfile for errors | |

|•          Check CRS Health ($ORA_CRS_HOME/bin/crsctl check crs) | |

|•          Check CRS Resources – ONS, GSD, VIP ($ORA_CRS_HOME/bin/crs_stat –t) are all online | |

|CRS INSTALL SCENARIO #3 |Result (Pass/Fail) |

|Install Oracle Cluster Ready Services 10gR2 (10.2) => NON-SHARED ORA_CRS_HOME => OCR/VDISK  ON SHARED FS | |

|Validate Oracle Cluster Ready Services Installation | |

|•          Check installActions logfile for errors | |

|•          Check CRS Health ($ORA_CRS_HOME/bin/crsctl check crs) | |

|•          Check CRS Resources – ONS, GSD, VIP ($ORA_CRS_HOME/bin/crs_stat –t) are all online | |

|CRS INSTALL SCENARIO #4 |Result (Pass/Fail) |

|Install Oracle Cluster Ready Services 10gR2 (10.2) => NON-SHARED ORA_CRS_HOME => OCR/VDISK  ON RAW DEVICES | |

|Validate Oracle Cluster Ready Services Installation | |

|•          Check installActions logfile for errors | |

|•          Check CRS Health ($ORA_CRS_HOME/bin/crsctl check crs) | |

|•          Check CRS Resources – ONS, GSD, VIP ($ORA_CRS_HOME/bin/crs_stat –t) are all online | |

|RAC INSTALL SCENARIO #1 |Result (Pass/Fail) |

|Install Oracle RAC 10gR2 (10.2) => SHARED ORACLE_HOME => CREATE GENERAL PURPOSE DB ON SHARED FS | |

|Validate Oracle RAC 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|•          Check CRS Health from RAC HOME ($ORACLE_HOME/bin/crsctl check crs) | |

|•          Connect to database (using sqlplus) | |

|RAC INSTALL SCENARIO #2 |Result (Pass/Fail) |

|Install Oracle RAC 10gR2 (10.2) => SHARED ORACLE_HOME => CREATE GENERAL PURPOSE DB ON NAS | |

|Validate Oracle RAC 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|•          Check CRS Health from RAC HOME ($ORACLE_HOME/bin/crsctl check crs) | |

|•          Connect to database (using sqlplus) | |

|RAC INSTALL SCENARIO #3 |Result (Pass/Fail) |

|Install Oracle RAC 10gR2 (10.2) => NON-SHARED ORACLE_HOME => CREATE GENERAL PURPOSE DB ON SHARED FS | |

|Validate Oracle RAC 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|•          Check CRS Health from RAC HOME ($ORACLE_HOME/bin/crsctl check crs) | |

|•          Connect to database (using sqlplus) | |

|RAC INSTALL SCENARIO #4 |Result (Pass/Fail) |

|Install Oracle RAC 10gR2 (10.2) => NON-SHARED ORACLE_HOME => CREATE CUSTOM DB ON ASM (SAN) | |

|Validate Oracle RAC 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|•          Check CRS Health from RAC HOME ($ORACLE_HOME/bin/crsctl check crs) | |

|•          Connect to database (using sqlplus) | |

|RAC INSTALL SCENARIO #5 |Result (Pass/Fail) |

|Install Oracle RAC 10gR2 (10.2) => NON-SHARED ORACLE_HOME => CREATE CUSTOM DB ON ASM (w/ ASMLIB) | |

|Validate Oracle RAC 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|•          Check CRS Health from RAC HOME ($ORACLE_HOME/bin/crsctl check crs) | |

|•          Connect to database (using sqlplus) | |

|RAC INSTALL SCENARIO #6 |Result (Pass/Fail) |

|Install Oracle RAC 10gR2 (10.2) => SHARED ORACLE_HOME => CREATE GENERAL PURPOSE DB ON ASM (NAS) | |

|Validate Oracle RAC 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|•          Check CRS Health from RAC HOME ($ORACLE_HOME/bin/crsctl check crs) | |

|•          Connect to database (using sqlplus) | |

|RAC INSTALL SCENARIO #7 |Result (Pass/Fail) |

|Install Oracle RAC 10gR2 (10.2) => NON-SHARED ORACLE_HOME => CREATE CUSTOM  DB ON RAW DEVICES | |

|Validate Oracle RAC 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|•          Check CRS Health from RAC HOME ($ORACLE_HOME/bin/crsctl check crs) | |

|•          Connect to database (using sqlplus) | |

|RAC INSTALL SCENARIO #8 |Result (Pass/Fail) |

|Install Oracle RAC 10gR2 (10.2) => NON-SHARED ORACLE_HOME => CREATE CUSTOM  DB ON NAS | |

|Validate Oracle RAC 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|•          Check CRS Health from RAC HOME ($ORACLE_HOME/bin/crsctl check crs) | |

|•          Connect to database (using sqlplus) | |

|SINGLE INSTANCE INSTALL SCENARIO #1 |Result (Pass/Fail) |

|Install Oracle Single Instance 10gR2 (10.2) => CUSTOM INSTALL => CUSTOM DB with ALL OPTIONS | |

|Validate Oracle Single Instance 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|•          Connect to database (using sqlplus) | |

|SINGLE INSTANCE INSTALL SCENARIO #2 |Result (Pass/Fail) |

|Install Oracle Single Instance 10gR2 (10.2) => GENERAL PURPOSE DB => SELECT ‘ALL LANGUAGES’ & ‘INSTALL DEMOS’ | |

|Validate Oracle Single Instance 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|•          Connect to database (using sqlplus) | |

|SINGLE INSTANCE INSTALL SCENARIO #2 |Result (Pass/Fail) |

|Install Oracle Companion CD 10gR2 (10.2) => HTML w/ APACHE => NCOMP, Demos | |

|Validate Oracle Companion CD 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|SINGLE INSTANCE INSTALL SCENARIO #3 |Result (Pass/Fail) |

|Install Oracle Client 10gR2 (10.2) => RUNTIME | |

|Validate Oracle Client 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|SINGLE INSTANCE INSTALL SCENARIO #4 |Result (Pass/Fail) |

|Install Oracle Client 10gR2 (10.2) => CUSTOM | |

|Validate Oracle Client 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|SINGLE INSTANCE INSTALL SCENARIO #5 |Result (Pass/Fail) |

|Install Oracle Transparent Gateways 10gR2 (10.2) | |

|Validate Oracle Transparent Gateways 10gR2 (10.2) Installation | |

|•          Check installActions logfile for errors | |

|OCE INSTALL VALIDATION |Result (Pass/Fail) |

|Install OCE Certification Kit for Oracle 10g Release 2 (10.2) |  |

|•          Check OCE Installation logfiles for errors | |

 

Comments

[pic]

[pic]

[pic]

[pic]

STEP 3: Software Post-Installation Verification/Set-up

If there are any problems please indicate here and in the Comments Section. Send any relevant logs with the checklist.

|  |

|VERIFICATION CHECK |COMPLETED, YES or NO  |

|Verify no errors were encountered in |  |

|$ORACLE_HOME/OCEinstallSI.log | |

|$ORACLE_HOME/OCEinstallRAC.log | |

|$ORACLE_HOME/OCEinstallexes.log | |

|RAW DEVICE CERTS ONLY - OAST Testing | |

|Set up devices/logical volumes as per $OAST_HOME/oast/files.dat.raw for Oracle Automated Stress Tests (OAST) | |

|     where is the  number of warehouses generated at install time | |

|RAW DEVICE CERTS ONLY - RAC HAS Testing | |

|Set up devices/logical volumes as per $INST_HOME/rdbms/test/macro/src/stkdefraw.tsc | |

| | |

|Ensure devices are accessible and writable by Oracle user from all nodes | |

|RAC HAS Testing Only (ORACLE_HOME not shared) | |

|Export the following mounts from node1 |  |

|   $ORACLE_HOME/oce/work | |

|   $ORACLE_HOME/dbs | |

|   $ORACLE_HOME/network/admin | |

|On all other nodes (not node1) in your cluster : |  |

|   mount   : $ORACLE_HOME/oce/work $ORACLE_HOME/oce/work | |

|   mount   :$ORACLE_HOME/dbs $ORACLE_HOME/dbs | |

|   mount   : $ORACLE_HOME/network/admin $ORACLE_HOME/network/admin | |

 

Comments

[pic]

[pic]

[pic]

[pic]

STEP 4: Oracle10gR2 OAST Tests

4.1 System Details

|Item |Quantity |

|Controller |  |

|Raid Storage | |

|External Disks | |

|Internal Disks |  |

4.1.1 RAID Configuration

|Database Stress|File Systems/Raw Volumes |# Disks Used to|RAID |Striping Factor|Comments |

|Type |Details |Build |Specification |(# columns) | |

| | |Data Volume |(eg. RAID5) | | |

4.1.2 Database & Layout Details

|Database Size - GB |SGA Size - MB |# Warehouses |

| | | |

4.2 Test Results

|Test Case |Particulars |Details |Runtime (hrs) |Results |Issues |Bugs |

| | | | |[Pass/Fail] | | |

|O-02 |OAST |Interconnect/Cache |3 | | | |

| | |run | | | | |

|O-03 |OAST |RAC Elevator test |24 | | | |

STEP 5: Oracle10gR2 Single Instance Tests

[Note: Consult OCE Release Notes for any changes to expected results listed here]

5.1 SI Suites Set 1

|Regression (view) |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|tkmain_pc1 (tpc1) |91 | |0 | | | |

|tkmain_8 (t8) |261 | |0 | | | |

|tkmain_11a (t11a) |92 | |0 | | | |

|tkmain_8b1 (t8b1) |76 | |0 | | | |

|tkmain_bc4 (tbc4) |24 | |0 | | | |

|tkmain_dpa (tdpa) |1 | |0 | | | |

|tkmain_lo1 (tl01) |187 | |0 | | | |

|nlsrtl sure (nsure) |432 | |0 | | | |

|tkmain_g1 (tg1) |149 | |0 | | | |

|tkmain_xd1 (txd1) |181 | |0 | | | |

|lrgj6b (j6b) |185 | |0 | | | |

|lrgj7d (j7d) |358 | |0 | | | |

 

 5.2 SI Suites Set 2

|Regression (view) |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|lrgjsj (jsj) |108 | |0 | | | |

|txjawall (oo01) |618 | |0 | | | |

|tkmain_pk1 (tpk1) |406 | |0 | | | |

|tkmain_310 (t310) |102 | |0 | | | |

|tkmain_dsa (tdsa) |3 | |0 | | | |

|tkmain_nt1 (tnt1) |107 | |0 | | | |

|tkmain_tb (ttb) |318 | |0 | | | |

|tkmain_7 (t7) |167 | |0 | | | |

|tkmain_gdk (tgdk) |119 | |0 | | | |

|tkmain_gf1 (tfg1) |52 | |0 | | | |

|lrgj1 (j1) |335 | |0 | | | |

|emdw |81 | |0 | | | |

 

5.3 SI Suites Set 3

|Regression (view) |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|txjgsall (oo02) |557 | |0 | | | |

|tkmain_pn1 (tpn1) |400 | |0 | | | |

|tkmain_lr1 (tlr1) |10 | |0 | | | |

|tkmain_41 (t41) |80 | |0 | | | |

|tkmain_bc5 (tbc5) |11 | |0 | | | |

|tkmain_bc6 (tbc6) |18 | |0 | | | |

|tkmain_ls1 (tls1) |74 | |0 | | | |

|tkmain_op1 (top1) |18 | |0 | | | |

|tkmain_m (tm) |84 | |0 | | | |

|tkmain_gp11 (tgp11) |62 | |0 | | | |

5.4 SI Suites Set 4

|Regression (view) |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|ctx_q1 (cc02) |265 | |0 | | | |

|txjorall (oo04) |672 | |0 | | | |

|tkmain_ps1 (tps1) |40 | |0 | | | |

|tkmain_8g1 (t8g1) |85 | |0 | | | |

|tkmain_d0 (td0) |210 | |0 | | | |

|tkmain_4ra (t4ra) |149 | |0 | | | |

|tkmain_8a1 (t8a1) |126 | |0 | | | |

|tkmain_gp12 (tgp12) |54 | |0 | | | |

|tkmain_e1 (te1) |84 | |0 | | | |

|tkmain_pq0 (tpq0) |130 | |0 | | | |

|xdk sure (xsure) |964 | |0 | | | |

|nl (nnl) |109 | |0 | | | |

|tkmain_3a (t3a) |1970 | |0 | | | |

5.5 SI Suites Set 5

|Regression (view) |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|ctx_u1 (cc01) |414 | |0 | | | |

|txsmoke (oo06) |208 | |0 | | | |

|tkmain_pu1 (tpu1) |892 | |0 | | | |

|tkmain_sms (tsms) |62 | |0 | | | |

|tkmain_2 (t2) |207 | |0 | | | |

|tkmain_a1 (ta1) |70 | |0 | | | |

|tkmain_ag1 (tag1) |1 | |0 | | | |

|tkmain_gp13 (tgp13) |97 | |0 | | | |

|tkmain_fc0 (tfc0) |11 | |0 | | | |

|tkmain_q1 (tq1) |106 | |0 | | | |

|tkmain_s (ts) |66 | |0 | | | |

5.6 SI Suites Set 6

|Regression (view) |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|o4a (do4a) |372 | |0 | | | |

|oracore sure (osure) |1142 | |0 | | | |

|tkmain_pu5 (tpu5) |884 | |0 | | | |

|tkmain_5r2 (t5r2) |27 | |0 | | | |

|tkmain_bc2 (tbc2) |100 | |0 | | | |

|tkmain_4l1 (t4l1) |43 | |0 | | | |

|tkmain_bc3 (tbc3) |56 | |0 | | | |

|tkmain_b (tb) |24 | |0 | | | |

|tkmain_gp15 (tgp15) |139 | |0 | | | |

|tkmain_eo1 (teo1) |19 | |0 | | | |

|tkmain_rr01 (trr01) |20 | |0 | | | |

5.7 SI Suites Set 7

|Regression (view) |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|lrgj4i (j4i) |291 | |0 | | | |

|om4a (dom4a) |372 | |0 | | | |

|tkmain_pv1 (tpv1) |407 | |0 | | | |

|tkmain_4i (t4i) |130 | |0 | | | |

|tkmain_8c1 (t8c1) |52 | |0 | | | |

|tkmain_gp14 (tgp14) |67 | |0 | | | |

|tkmain_i1 (ti1) |12 | |0 | | | |

|tkmain_ji1 (tji1) |46 | |0 | | | |

|tkmain_pa0 (tpa0) |82 | |0 | | | |

|tkmain_zg1 (tzg1) |196 | |0 | | | |

|tkmain_3 (t3) |151 | |0 | | | |

5.8 SI Suites Set 8

|Regression (view) |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|lrgj4k (j4k) |114 | |0 | | | |

|t4a (dt4a) |362 | |0 | | | |

|tkmain_1 (t1) |50 | |0 | | | |

|tkmain_pw1 (tpw1) |405 | |0 | | | |

|tkmain_4k1 (t4k1) |164 | |0 | | | |

|tkmain_61a (t61a) |509 | |0 | | | |

|tkmain_8d1 (t8d1) |2 | |0 | | | |

|tkmain_8e1 (t8e1) |195 | |0 | | | |

|tkmain_bc1 (tbc1) |60 | |0 | | | |

|tkmain_gp16 (tgp16) |18 | |0 | | | |

|tkmain_ll1 (tll1) |65 | |0 | | | |

|tkmain_lm0 (tlm0) |46 | |0 | | | |

|tkmain_rv01 (trv01) |91 | |0 | | | |

STEP 6: Oracle10gR2 RAC Tests

[Note: Consult OCE Release Notes for any changes to expected results listed here]

6.1 RAC Suites Set 1 (ASM)

|Regression |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|tkmain_9o2 |95 | |4 | | |chkosm1.dif, |

| | | | | | |chkosm2.dif, |

| | | | | | |chkosm3.dif, |

| | | | | | |chkosm4.dif |

|tkmain_9o3 |94 | |0 | | | |

|tkmain_9o4 |36 | |0 | | | |

|tkmain_fg1 |50 | |0 | | | |

|tkmain_fg2 |535 | |0 | | |possible tkfgvw2.dif |

| | | | | | |on 64-bit platforms |

|tkmain_fg3 |90 | |0 | | | |

|tkmain_fg5 |64 | |0 | | | |

|tkmain_fg7 |67 | |1 | | |tkfgkfopasmlib.dif |

6.2 RAC Suites Set 2

|Regression |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|tkmain_906 |71 | |0 | | | |

|tkmain_907 |100 | |0 | | | |

|tkmain_908 |100 | |0 | | | |

|tkmain_9a0 |113 | |0 | | | |

|tkmain_9c2 |116 | |0 | | |48 difs on 64bit – |

| | | | | | |KGHAL04 errors in |

| | | | | | |trace files. OK |

6.3 RAC Suites Set 3

|Regression |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|tkmain_9c1 |99 | |0 | | | |

|tkmain_9c3 |83 | |0 | | | |

|tkmain_9e0 |89 | |0 | | | |

6.4 RAC Suites Set 4

|Regression |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|tkmain_9h1 |92 | |0 | | | |

|tkmain_9h5 |26 | |0 | | | |

|tkmain_9i2 |70 | |0 | | | |

6.5 RAC Suites Set 5

|Regression |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|tkmain_9k0 |129 | |0 | | | |

|tkmain_9k1 |131 | |0 | | |Possible |

| | | | | | |tkmgdh3v.dif on |

| | | | | | |64-bit platform. |

|tkmain_9k2 |81 | |0 | | | |

|tkmain_9k5 |99 | |0 | | | |

6.6 RAC Suites Set 6

|Regression |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|tkmain_9l1 |124 | |0 | | | |

|tkmain_9l2 |56 | |0 | | | |

|tkmain_9rf |165 | |0 | | | |

6.7 RAC Suites Set 7

|Regression |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

|tkmain_9r0 |286 | |10 | | | |

|tkmain_9r2 |232 | |0 | | | |

6.8 HAS RAC Suite

|Regression |# .suc files |# .dif files |Results |Comments |

| | | |[Pass/Fail] | |

| |Expected |Actual |Expected |Actual | | |

STEP 7: Clusterware Compatibility Tests (Destructive)

Please refer to the Clusterware Compatibility Destructive Test Plan documentation for instructions on what/how to run these tests, and what/how to record the test results. The clusterware compatibility checklist will need to be completed and submitted along with this checklist (See Step 9).

7.1 Destructive Tests

|Test Case |Results |Comments |

| |[Pass/Fail] | |

| | | |

|Clusterware Compatibility Tests | | |

[pic]

STEP 8:  Complete Miscellaneous Comments (if applicable)

Please document any product or kit bugs encountered during the running of the OCE kit here along with any

acceptable difs approved by the OCE Support Team.  The test name and dif name need to be documented

as this is used to speed resolution for future certfications issues.

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________

 

 

 

[pic]

STEP 9: Email Completed Checklist to OCE Support

Upon completion of all testing, if there are no open issues please email completed checklist to certsup_ww@

 

STEP 10:  OCE Support Approves Certification

To be completed by Oracle Certification Environment representative:

The Oracle Certification Environment Group reviews the checklist submitted by vendors on completion of

testing. Upon approval a copy of the checklist is held on record for future vendor certification.  A copy is

also sent to the appropriate SBU contact to confirm the testing has been sucessfully completed.

For most platforms, a copy of the final certification/testing eBOM is sent to

for publication to Oracle's external "certify" website along with any bug specific information that may

apply to this platform. Linux RAC validation testing will not be published on the Oracle website but

vendor can choose to publish the results on their own external sites.

All communication with the Oracle Certification Environment team is via email to certsup_ww@

[pic]

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download