Chapter 6--Support Department Cost Allocation



CHAPTER 6

SUPPORT DEPARTMENT COST ALLOCATION

LEARNING OBJECTIVES

AFTER STUDYING THIS CHAPTER, YOU SHOULD BE ABLE TO:

1. Describe the difference between support departments and producing departments.

2. Explain five reasons why support costs may be assigned to producing departments.

3. Calculate charging rates, and distinguish between single and dual charging rates.

4. Allocate support center costs to producing departments using the direct method, the sequential method, and the reciprocal method.

5. Calculate departmental overhead rates.

CHAPTER SUMMARY

THIS CHAPTER FIRST DIFFERENTIATES SUPPORT DEPARTMENTS FROM PRODUCING DEPARTMENTS. THE COSTS OF SUPPORT DEPARTMENTS ARE COMMON TO ALL PRODUCING DEPARTMENTS AND MUST BE ALLOCATED TO THEM TO SATISFY MANY IMPORTANT OBJECTIVES. GIVEN THAT THE CAUSAL FACTORS CAN DIFFER FOR FIXED AND VARIABLE COSTS, A DUAL RATE CHARGING METHOD IS PREFERRED TO ALLOCATE THE VARIABLE AND FIXED COSTS SEPARATELY. THREE METHODS ARE INTRODUCED TO RECOGNIZE VARIOUS DEGREES OF SUPPORT DEPARTMENT INTERACTION CONSIDERED. WHILE THE DIRECT METHOD ALLOCATES SUPPORT DEPARTMENT COSTS ONLY TO THE PRODUCING DEPARTMENTS, THE SEQUENTIAL METHOD AND THE RECIPROCAL METHOD ALLOCATE SUPPORT SERVICE COSTS AMONG SOME (OR ALL) INTERACTING SUPPORT DEPARTMENTS BEFORE ALLOCATING COSTS TO THE PRODUCING DEPARTMENTS. UPON ALLOCATING ALL SUPPORT DEPARTMENT COSTS TO PRODUCING DEPARTMENTS, AN OVERHEAD RATE CAN BE COMPUTED FOR EACH PRODUCING DEPARTMENT IN ORDER TO DETERMINE THE PRODUCT’S UNIT COST.

CHAPTER REVIEW

I. AN OVERVIEW OF COST ALLOCATION

Cost allocation is required to assign common resource costs to cost objects or common costs. Common costs occur when the same resource is used in the output of two or more services or products.

Allocation is a means of dividing a pool of costs and assigning it to various subunits. Thus, allocation does not affect the amount of total costs.

A. Cost allocation procedures include the following steps:

1. Departmentalize the firm and classify each department as a support department or a producing department.

There are two types of departments (cost objects):

a. Producing departments are directly responsible for creating the products and services sold to customers.

Examples: Assembly, Finishing

b. Support departments provide essential support services for producing departments.

Examples: Maintenance, Human Resources, cafeteria

Review textbook Exhibit 6-1, which gives examples of producing and support departments for a manufacturing firm and a service firm.

2. Trace all overhead costs to a support or producing department.

The costs that are directly associated with the individual departments will be traced to one, and only one, department.

3. Allocate support department costs to producing departments.

The support department costs are part of the total product costs and must be assigned to the products through cost allocation from support departments to producing departments.

4. Calculate predetermined overhead rates for producing departments.

5. Allocate overhead costs to the units of individual product through the predetermined overhead rates.

Summary of support department cost allocation:

■ Support department cost assignment is a two-stage process:

■ Allocation of support department costs to producing departments.

■ Assignment of these allocated costs to individual products using departmental overhead rates.

■ Support department costs cannot be allocated directly to units produced because:

■ Products do not pass through the support departments.

■ Support departments exist to support manufacturing activities within the producing departments.

B. Types of Allocation Bases

1. The use of causal factors (activity drivers) is best for allocation of support department costs.

Causal factors are variables or activities within a producing department that provoke the incurrence of support costs. Thus, using causal factors will result in more accurate product costs and more control of the consumption of services.

2. The use of a proxy is an alternative when an easily measured causal factor cannot be found.

The choice of a good proxy to guide allocation depends on the firm’s objectives for allocation.

Review textbook Exhibit 6-3, which gives examples

of possible activity drivers for allocating support department costs.

II. Objectives of Allocation

A. The Institute of Management Accountants (IMA) has identified the following major objectives of support department cost allocation.

1. To obtain a mutually agreeable price.

Accurate cost allocation helps a firm create meaningful and competitive bids.

2. To compute product-line profitability.

Reliable product cost information helps a firm ensure that all products are profitable.

3. To predict the economic effects of planning and control.

Accurate cost allocation helps a firm assess the profitability of various support services and determine the appropriate mix of support services offered by the firm.

4. To value inventory.

All manufacturing costs, direct and indirect, must be assigned to the products produced to meet GAAP requirements.

5. To motivate managers.

Allocation of support department costs:

■ Helps each producing department select the appropriate level of support service consumption.

■ Encourages support department managers to be more sensitive to the needs of the producing departments.

B. The guidelines for determining the best allocation method are as follows:

1. Cause and effect—Causal factors should be used to guide the allocations.

2. Benefits received—Cost should be allocated based on the perceived benefits.

3. Fairness or equity (especially in government contracts)—Cost allocation for a government contract should be similar to that for a nongovernment contract.

4. Ability to bear—The more profitable the department, the larger the allocation, regardless of whether or not there is any relationship or usage. This is the least desirable guideline because it provides no motivational benefits.

5. Cost-benefit—The cost of implementing an allocation scheme should result in some benefit.

III. Allocating One Department’s Costs to Another Department

Support department costs are allocated through the use of a charging rate. Considerations that go into determining an appropriate charging rate include (1) the choice of a single or a dual rate and (2) the use of budgeted versus actual support department costs.

A. A Single Charging Rate

1. Both fixed and variable costs are combined into a single rate. The amount of service cost allocated is solely a function of usage/volume.

2. The use of a single rate treats the fixed cost as if it were variable. It ignores the differential impact of changes in usage on costs. Fixed costs do not vary with the level of services.

B. Dual Charging Rates

Two separate rates, one for fixed cost and one for variable cost, are used to avoid the treatment of fixed costs as variable. The variable rate is used in conjunction with the fixed amount allocated to determine the total charge.

1. Developing a Fixed Rate

Fixed service costs can be considered capacity costs because when the support department was established, its delivery capacity was designed to serve the long-term needs of the producing departments.

Support department fixed costs can be allocated using a three-step procedure:

a. Determination of budgeted fixed support service costs.

b. Computation of the allocation ratio:

Allocation ratio = [pic]

c. Allocation:

Allocation = Allocation ratio × Budgeted fixed support service costs

2. Developing a Variable Rate

Need to identify the appropriate cost driver.

The benefits of dual charging rates include the following:

■ Fixed costs are allocated to producing departments according to their original needs of support capacity.

■ Variable costs are allocated to producing departments based on their usage of the support department service.

C. Budgeted versus Actual Usage

1. Use the budgeted usage as the allocation base when fixed costs are involved.

2. Allocation of budgeted support service costs is better than allocation of actual support service costs because allocating actual costs passes on the efficiencies or inefficiencies of the service department, something that the manager of the producing department cannot control.

3. Support department cost allocation for product costing is calculated as follows:

Cost allocated based on dual rate method =

(Total budgeted fixed cost × Allocation ratio)

+ (Budgeted unit variable cost × Budgeted activity level)

4. Support department cost allocation for performance evaluation is calculated as follows:

Cost allocated based on dual rate method =

(Total budgeted fixed cost × Allocation ratio)

+ (Budgeted unit variable cost × Actual activity level)

D. Fixed versus Variable Bases: A Note of Caution

1. Use the normal or practical capacity to allocate fixed support department costs as long as the capacity demands from the producing departments remain at the level originally anticipated.

2. Note that allocation of fixed costs based on actual usage will allow the actions of one department to affect the amount of cost allocated to another department.

Review textbook Exhibit 6-4, which shows the use of budgeted usage for product costing.

Review textbook Exhibit 6-5, which illustrates the use of actual usage for performance evaluation.

Note that the difference between the results of single-rate and dual-rate cost allocation derives from different activity levels used for allocating variable cost for different purposes.

IV. Choosing a Support Department Cost Allocation Method

Many companies have multiple support departments, and they frequently interact. These interactions among support departments need to be considered to produce accurate cost assignments.

Three methods can be used to allocate support department costs: the direct, sequential, and reciprocal methods. In determining which support department cost allocation method to use, companies must:

■ Determine the extent of support department interaction.

■ Weigh the costs and benefits associated with each method.

A. Direct Method of Allocation

When support department costs are allocated only to the producing departments, the direct method of allocation is being used. This is the most simple and straightforward of the three allocation methods. Under this method,

■ No support department costs are allocated to any other support department.

■ All interactions between the support departments are ignored.

Review textbook Exhibit 6-6, which illustrates the direct method of allocation.

Review textbook Exhibit 6-8, which provides a numeric example of direct allocation.

B. Sequential Method of Allocation

The sequential (or step) method of allocation recognizes that interactions among support departments do occur.

1. Cost allocations are performed in a step-down fashion.

a. The costs of the support department rendering the greatest service are allocated first.

b. Once a support department’s costs have been allocated, no costs are allocated back to it.

c. The costs allocated from a support department are its direct costs plus any costs it receives in allocations from other support departments.

2. Sequential allocation may be more accurate than the direct method because it recognizes some interactions among the support departments.

Its disadvantage, however, is that it does not recognize all of the interactions between support departments.

Review textbook Exhibit 6-9, which illustrates the sequential method of allocation.

Review textbook Exhibit 6-10, which provides a numeric example of sequential allocation.

C. Reciprocal Method of Allocation

In the reciprocal method of allocation, all of the interactions between support departments are recognized by its reciprocity on cost allocation.

1. The total cost of a support department is the sum of its direct costs plus the proportion of service received from other support departments. The total cost reflects interactions among the support departments.

Total cost = Direct costs + Allocated costs

2. A series of simultaneous linear equations must be constructed and solved to perform reciprocal cost allocation.

Review textbook Exhibit 6-11, which illustrates the reciprocal method of

allocation and the proportion of support output consumed by all users.

Review textbook Exhibit 6-12, which provides a numeric example of reciprocal allocation.

D. Comparison of the Three Methods

1. The advantages of better allocation must outweigh the increased cost of using a more theoretically preferred method.

2. Rapid changes in technology make allocation unnecessary. For example, there is no need for support department cost allocation in the JIT environment because the manufacturing cells (i.e., producing departments) are performing many support functions.

V. Departmental Overhead Rates and Product Costing

Upon allocating all support department costs to producing departments, an overhead rate can be computed for each producing department to assign costs to products.

Departmental overhead rates =

[pic]

■ The accuracy of the product costs depends primarily on the accuracy of the assignment of the overhead costs because material and labor are directly traceable to products.

■ Great care should be used in identifying and using causal factors for both stages of overhead assignment. This, in turn, depends upon

■ the strength of correlation among the factors used to allocate support costs to the department and

■ the strength of correlation among the factors used to allocate the producing department’s overhead costs to the products.

KEY TERMS TEST

FROM THE LIST THAT FOLLOWS, SELECT THE TERM THAT BEST COMPLETES EACH STATEMENT AND WRITE IT IN THE SPACE PROVIDED.

causal factors

common cost

direct method

producing department

reciprocal method

sequential (or step) method

support department

1. The method that allocates service costs to producing departments without considering interactions that may exist among the support departments is the __________________     _____________.

2. _______________________ is the cost of a resource used in the output of two or more services or products.

3. The method that allocates service costs to user departments giving partial consideration to interactions among the support departments is the _______________________________.

4. The method that simultaneously allocates service costs to all user departments is the _______________________________.

5. _________________________ are variables or activities within a producing department that provoke the incurrence of support costs.

6. The ____________________________________ is responsible for producing the products or services that are sold to customers.

7. The ____________________________________ provides essential support to producing departments.

MULTIPLE-CHOICE QUIZ

COMPLETE EACH OF THE FOLLOWING STATEMENTS BY CIRCLING THE LETTER OF THE BEST ANSWER.

1. Which of the following departments would be classified as a support department?

a. Fabricating

b. Assembly

c. Engineering

d. Finishing

e. Grinding

2. Which of the following departments would be classified as a producing department?

a. Engineering

b. Machining

c. Final Inspection

d. Maintenance

e. Scheduling

3. Which of the following best describes the two-stage allocation process?

a. Costs are first traced to support departments, then costs are allocated to units.

b. Costs are first allocated to producing departments, then costs are traced to support departments.

c. Costs are first allocated to support departments, then costs are allocated to products.

d. Costs are first allocated to producing departments, then costs are allocated to products.

e. Costs are first allocated to products, then costs are allocated to services.

4. Which of the following statements regarding allocation bases is correct?

a. Causal factors will introduce inaccuracies in the product costs; they should never be used.

b. Support departments will never have good proxies, thus a causal factor must be used.

c. Support departments will never have causal factors, thus a proxy must be used.

d. If possible, a good proxy should be used as the allocation base.

e. If possible, causal factors should be used as the allocation base.

5. Which of the following is not an objective of allocation, as identified by the IMA?

a. To provide an estimate of cost drivers.

b. To obtain a mutually agreeable price.

c. To compute product-line profitability.

d. To predict the economic effects of planning and control.

e. All of the above are objectives of allocation.

6. Which of the following statements regarding the allocation of support department costs is correct?

a. A single charging rate will provide producing department managers with an accurate assessment of fixed and variable costs.

b. A dual charging rate leads the producing department managers to treat all costs as variable.

c. The ability to bear is the best guideline to follow in choosing an allocation method.

d. A dual charging rate leads the producing department managers to treat all costs as fixed.

e. A dual charging rate will provide producing department managers with an accurate assessment of fixed and variable costs.

7. When a dual charging rate is used to allocate fixed costs, which of the following should be used to measure the capacity?

a. normal activity of the support department

b. normal activity of the producing department

c. peak activity of the support department

d. actual activity of the producing department

e. actual activity of the support department

8. Which of the following is not a reason for using the budgeted support department costs in preparing the allocation rates?

a. Only budgeted support department costs can be broken down into fixed and variable costs.

b. Since the support department allocation is preliminary to determining the overhead rate at the beginning of the period, actual costs are not yet known.

c. Since support department allocations are used for performance evaluation, the budget is used to enable comparisons with actual results.

d. Producing department managers have no control over the support department spending; the efficiencies or inefficiencies should not be passed on to the producing department.

e. All of the above are reasons for using budgeted support department costs rather than actual costs.

Use the following information for Questions 9 and 10:

ABC Company has two support departments (Power and Maintenance) and two producing departments (Assembly and Finishing). The direct allocation method is used to assign support department costs to the producing departments. The causal factor for the power costs is kilowatt hours; the causal factor for the maintenance costs is repair hours. Assume the following information:

Power Maintenance Assembly Finishing

Direct costs $100,000 $150,000 $75,000 $50,000

Kilowatt hours 10,000 90,000 100,000

Repair hours 500 2,500 2,000

9. What would be the Power Department allocation to the Assembly Department?

a. $45,000

b. $47,368

c. $50,000

d. $54,474

e. $82,895

10. What would be the Maintenance Department allocation to the Finishing Department?

a. $20,000

b. $22,222

c. $60,000

d. $66,667

e. $71,111

Use the following information for Questions 11 and 12:

Triad Company has two support departments (Janitorial and Payroll) and two producing departments (Assembly and Finishing). The sequential allocation method is used to assign support department costs to the producing departments. Payroll costs are allocated first. A proxy for janitorial services is square footage; a proxy for payroll is number of employees. Assume the following information:

Janitorial Payroll Assembly Finishing

Direct costs $250,000 $275,000

Square feet 500 3,500 1,500

Number of employees 5 8 125 100

11. What would be the Payroll Department allocation to the Assembly Department?

a. $144,433

b. $149,457

c. $152,778

d. $172,639

e. none of the above

12. What would be the Janitorial Department allocation to the Finishing Department?

a. $68,182

b. $69,812

c. $75,000

d. $76,793

e. none of the above

Use the following information for Questions 13 and 14:

M&P Tool has three service departments that support the production area. Outlined below is the estimated overhead by department for the upcoming year:

Estimated Overhead Number of Employees

Service Departments:

Receiving $25,000 2

Repair 35,000 2

Tool 10,000 1

Production Departments:

Assembly 25

Bolting 12

The Repair Department supports the greatest number of departments, followed by the Tool Department. Overhead cost is allocated to departments based on the number of employees.

13. Using the direct method of allocation, how much of the Repair Department’s overhead will be allocated to the Tool Department?

a. $0

b. $875

c. $7,000

d. $11,667

e. $14,000

14. Using the sequential method of allocation, what would be the allocation from the Repair Department to the Tool Department?

a. $0

b. $875

c. $7,000

d. $11,667

e. $14,000

PRACTICE TEST

EXERCISE 1

Classify each of the following departments in a factory as a producing department or a support department by placing a check mark in the appropriate column.

| |Producing Department |Support Department |

| 1. Fabricating | | |

| 2. Accounting | | |

| 3. Machining | | |

| 4. Finishing | | |

| 5. Rework | | |

| 6. Cafeteria | | |

| 7. Maintenance | | |

| 8. Grinding | | |

| 9. Heat treat | | |

| 10. Cutting | | |

| 11. Materials storeroom | | |

| 12. Purchasing | | |

| 13. Assembly | | |

| 14. Engineering | | |

| 15. Welding | | |

EXERCISE 2

APEX CORPORATION HAS DECIDED TO REVISE THE ALLOCATION APPROACH FOR ITS FINANCIAL ANALYSIS DEPARTMENT. THE NEW APPROACH IS TO DEVELOP A CHARGING RATE BASED ON THE NUMBER OF SPECIAL REPORTS REQUESTED. EACH OF THE REPORTS TAKES ROUGHLY THE SAME RESOURCES, TIME, AND SUPPLIES, SO THE NUMBER OF REPORTS IS AN ADEQUATE PROXY OF THE ACTIVITY OF THE DEPARTMENT. FIXED COSTS FOR THE DEPARTMENT TOTAL $10,000 PER MONTH; VARIABLE COSTS ARE $15 PER REPORT. THE ESTIMATED ACTIVITY FOR THE VARIOUS DEPARTMENTS HAS BEEN FORECASTED TO BE AS FOLLOWS:

Department Estimated Reports

Scheduling 5

Accounting 25

Finance 20

Data Processing 15

Engineering 25

Legal 10

After the new allocation system had been in place for six months, the following average monthly activity was observed:

Department Actual Reports

Scheduling 10

Accounting 25

Finance 45

Data Processing 15

Engineering 30

Legal 25

Required:

1. Calculate a single charging rate, on a per report basis, to be charged to the departments. Based on the departments’ actual number of reports, how much would be charged to each department using the single charging rate?

EXERCISE 2 (Continued)

2. CALCULATE A DUAL CHARGING RATE. BASED ON THE DEPARTMENTS’ ACTUAL NUMBER OF REPORTS, HOW MUCH WOULD BE CHARGED TO EACH DEPARTMENT USING THE DUAL CHARGING RATE?

3. Which departments would prefer the single charging rate? Why? Which would prefer the dual charging rate, and why?

EXERCISE 3

TRIAD COMPANY’S LEGAL DEPARTMENT SERVES AS AN INTERNAL PATENT CONSULTING SERVICE. THE DEPARTMENT HAS FIXED SALARIES OF $30,000 PER MONTH. PATENT SEARCHES COST $50 PER HOUR OF CONNECT TIME WITH THE ON-LINE DATABASES. ALL OTHER COSTS OF THE DEPARTMENT ARE FIXED, TOTALING $15,000 PER MONTH. THE TWO RESEARCH LABORATORIES OF TRIAD, MEMPHIS AND COLUMBUS, ARE CURRENTLY THE ONLY USERS OF THE SERVICE. NORMAL USAGE HAS AVERAGED 175 HOURS OF CONNECT TIME FOR THE MEMPHIS LAB AND 225 HOURS FOR THE COLUMBUS LAB.

Required:

1. Determine the amount of legal service costs that should be assigned to each lab using a single charging rate.

2. Determine the amount of legal service costs that should be assigned to each lab using a dual charging rate.

3. During October, the Legal Department had fixed costs totaling $48,000 and actual connect time costs of $23,400. The Memphis lab used 180 hours of connect time; Columbus used 270 hours. Determine the amount of costs that should be assigned to each lab. (Hint: Use good principles of performance evaluation.)

EXERCISE 4

QRS COMPANY HAS TWO SUPPORT DEPARTMENTS (ADMINISTRATION AND JANITORIAL) AND THREE PRODUCING DEPARTMENTS (FABRICATING, ASSEMBLY, AND FINISHING). COSTS AND ACTIVITIES ARE AS FOLLOWS:

Administration Janitorial Fabricating Assembly Finishing

Direct costs $50,000 $30,000 $40,000 $50,000 $25,000

Number of employees 10 30 40 20

Square feet 2,000 10,000 28,000 15,000

Direct labor hours 5,000 6,000 2,000

Administrative services are allocated based on the number of employees; janitorial services are allocated based on square footage. Overhead rates for the three producing departments are based on direct labor hours.

Required:

Determine the overhead application rates for the producing departments using each of the three allocation methods:

1. Direct allocation method for the support departments

EXERCISE 4 (Continued)

2. SEQUENTIAL ALLOCATION METHOD FOR THE SUPPORT DEPARTMENTS

3. Reciprocal allocation method for the support departments

EXERCISE 4 (Continued)

USE THIS SPACE TO CONTINUE YOUR ANSWER.

“CAN YOU?” CHECKLIST

❑ CAN YOU DESCRIBE THE DIFFERENCE BETWEEN A PRODUCING DEPARTMENT AND A SUPPORT DEPARTMENT? CAN YOU EXPLAIN WHY THE DISTINCTION IS IMPORTANT?

❑ Can you describe the steps to take to allocate support department costs?

❑ Can you explain the various objectives of allocating support department costs? In other words, why are support costs allocated?

❑ Can you explain the difference between a single charging rate and a dual charging rate? Can you explain when actual usage or budgeted usage should be used? Can you explain why the method used may affect the producing department manager’s view of the cost behavior?

❑ Can you allocate support department costs using the direct method? The sequential method? The reciprocal method? Can you explain how each method treats the interactions among support departments?

ANSWERS

KEY TERMS TEST

1. DIRECT METHOD

2. Common cost

3. sequential (or step) method

4. reciprocal method

5. Causal factors

6. producing department

7. support department

MULTIPLE-CHOICE QUIZ

1. C

2. b

3. d

4. c

5. a

6. e

7. b

8. a

9. b $100,000 × 90,000 / (90,000 + 100,000) = $47,368

10. d $150,000 × 2,000 / (2,000 + 2,500) = $66,667

11. b $275,000 × 125 / (5 + 125 + 100) = $149,457

12. d $250,000 + ($275,000 × 5) / (5 + 125 + 100) × 1,500 / (3,500 + 1,500) =

$255,978 × 1,500 / 5,000 = $76,793

13. a The direct method does not allocate support department’s cost to other support departments.

14. b The Repair Department performs allocation first. Thus, the Tool Department will receive cost allocation of ($35,000 × 1/40) = $875.

PRACTICE TEST

EXERCISE 1

| |PRODUCING DEPARTMENT |SUPPORT DEPARTMENT |

| 1. FABRICATING |( | |

| 2. ACCOUNTING | |( |

| 3. MACHINING |( | |

| 4. FINISHING |( | |

| 5. REWORK |( | |

| 6. CAFETERIA | |( |

| 7. MAINTENANCE | |( |

| 8. GRINDING |( | |

| 9. HEAT TREAT |( | |

| 10. CUTTING |( | |

| 11. MATERIALS STOREROOM | |( |

| 12. PURCHASING | |( |

| 13. ASSEMBLY |( | |

| 14. ENGINEERING | |( |

| 15. WELDING |( | |

EXERCISE 2 (APEX CORPORATION)

1. SINGLE CHARGING RATE = ($10,000 / 100) + $15 = $115

Department Reports Rate Total

Scheduling 10 $115 $ 1,150

Accounting 25 115 2,875

Finance 45 115 5,175

Data Processing 15 115 1,725

Engineering 30 115 3,450

Legal 25 115   2,875

$17,250

2. Dual charging rate: Variable rate = $15; Fixed charge as follows:

Capacity Fixed Cost

Department Reports Percent Allocated

Scheduling 5 5 $   500

Accounting 25 25 2,500

Finance 20 20 2,000

Data Processing 15 15 1,500

Engineering 25 25 2,500

Legal 10  10   1,000

100 $10,000

V/OH V/OH Fixed Cost

Department Reports Rate Costs Allocated Total

Scheduling 10 $15 $  150 $   500 $   650

Accounting 25 15 375 2,500 2,875

Finance 45 15 675 2,000 2,675

Data Processing 15 15 225 1,500 1,725

Engineering 30 15 450 2,500 2,950

Legal 25 15    375   1,000   1,375

$2,250 $10,000 $12,250

3. The only time a department will prefer a single charging rate is when the actual usage is less than the expected usage. When actual usage equals expected usage, a single charging rate will equal a dual charging rate. If actual usage is greater than expected, the department will be charged a larger amount due to fixed costs.

Exercise 3 (Triad Company)

1. SINGLE CHARGING RATE = [($30,000 + $15,000) / (175 + 225)] + $50

Single charging rate = ($45,000 / 400) + $50 = $162.50

Overhead cost allocated to Memphis: 175 hours × $162.50 = $28,437.50

Overhead cost allocated to Columbus: 225 hours × $162.50 = $36,562.50

2. Dual charging rate: Variable charge = $50 hour

Memphis 175 hours = 43.75% of total hours

Fixed cost: $45,000 × 0.4375 = $19,687.50

Overhead cost allocated: $19,687.50 fixed + ($50 × 175 hours) = $28,437.50

Columbus 225 hours = 56.25% of total hours

Fixed cost: $45,000 × 0.5625 = $25,312.50

Overhead cost allocated: $25,312.50 fixed + ($50 × 225 hours) = $36,562.50

3. Memphis: $19,687.50 + ($50 × 180 hours) = $19,687.50 + $ 9,000 = $28,687.50

Columbus: $25,312.50 + ($50 × 270 hours) =  25,312.50 +  13,500 =  38,812.50

$45,000.00 + $22,500 = $67,500.00

Good principles of performance evaluation will use the budgeted rates for the allocation rather than the actual rates. The inefficiencies in the Legal Department ($3,000 over-budget fixed costs and $900 over-budget variable costs) are not allocated to the users.

Exercise 4 (QRS Company)

1. DIRECT METHOD

Fabricating Assembly Finishing Total

No. of employees 30 40 20 90

Service percentage 33.33% 44.44% 22.22% 100.00%

Square feet 10,000 28,000 15,000 53,000

Service percentage 18.87% 52.83% 28.30% 100.00%

Administrative cost allocation* $16,666.67 $22,222.22 $11,111.11 $50,000.00

Janitorial cost allocation** 5,660.38 15,849.06 8,490.57 30,000.00

Direct overhead cost  40,000.00  50,000.00  25,000.00

Total overhead cost $62,327.05 $88,071.28 $44,601.68

Divided by direct labor hours ÷   5,000 ÷   6,000 ÷   2,000

Departmental OH rate per DLH $   12.47 $   14.68 $   22.30

**Departmental employee % × $50,000

**Departmental square feet % × $30,000

2. Sequential Method

As indicated in the service proportion table, the Administration Department provides the highest percentage of service to other service departments. Thus, the administrative costs will be allocated first, then followed by the Janitorial Department cost allocation.

Service Proportion Table

Admin. Janitorial Fabricating Assembly Finishing Total

No. of employees 10 30 40 20 100

Service percentage 10.00% 30.00% 40.00% 20.00% 100.00%

Square feet 2,000 10,000 28,000 15,000 55,000

Service percentage 3.64% 18.18% 50.91% 27.27% 100.00%

Sequential Cost Allocation

Admin. Janitorial Fabricating Assembly Finishing Total

Direct overhead cost $ 50,000) $30,000) $40,000 $50,000 $25,000

First step: Allocate admin. costs $(50,000) $ 5,000) $15,000 $20,000 $10,000

Second step: Allocate janitorial costs

Determine allocation percentages:

Square feet 10,000 28,000 15,000 53,000

Allocation percentage 18.87% 52.83% 28.30% 100.00%

Janitorial cost allocation $(35,000) $6,604 $18,491 $9,906 $35,000

Total overhead costs $0) $0) $61,604 $88,491 $44,906

Divided by direct labor hours ÷ 5,000 ÷ 6,000 ÷ 2,000

Departmental OH rate per DLH $ 12.32 $ 14.75 $ 22.45

3. Reciprocal Method

Service Proportion Table

Admin. Janitorial Fabricating Assembly Finishing Total

No. of employees 10 30 40 20 100

Service percentage 10.00% 30.00% 40.00% 20.00% 100.00%

Square feet 2,000 10,000 28,000 15,000 55,000

Service percentage 3.64% 18.18% 50.91% 27.27% 100.00%

Simultaneous equations can be created based on the service proportion table above.

A = $50,000 +.0364J J = $30,000 + 0.1A

where A = Administration Department total costs

J = Janitorial Department total costs

A = $50,000 + .0364 × ($30,000 + 0.1A)

A = $50,000 + $1,092 + 0.00364A J = $30,000 + (0.1 × $51,279)

0.99636A = $51,092 J = $30,000 + $5,128

A = $51,279 J = $35,128

Reciprocal Cost Allocation

Admin. Janitorial Fabricating Assembly Finishing

Direct overhead cost $50,000.00) $30,000.00) $40,000.00 $50,000.00 $25,000.00

Administrative cost allocation (51,279.00) 5,127.90) 15,383.70 20,511.60 10,255.80

Janitorial cost allocation   1,277.38) (35,128.00)   6,386.91  17,883.35   9,580.36

Total overhead costs $ 0) $ 0) $61,770.61 $88,394.95 $44,836.16

Direct labor hours ÷   5,000 ÷   6,000 ÷   2,000

Departmental overhead rate $   12.35 $   14.73 $   22.42

-----------------------

Learning Objective #1

Learning Objective #2

Learning Objective #3

Learning Objective #4

Learning Objective #5

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download