Piston Ring Clarification on Cummins 4.5 & 6.7L B Series ...
Piston Ring Clarification on Cummins 4.5 & 6.7L B Series Diesel Engines
The AERA Technical Committee offers the following information regarding piston ring clarification on Cummins 4.5 & 6.7L, B Series diesel engines. Two different intermediate piston ring designs are used in these engines and the specific use depends upon the engine serial number. The type of piston ring can be identified by the type of coating applied to the ring face.
? The chrome faced intermediate piston ring will have a bare metal appearance. ? The phosphate coated intermediate piston ring will have a black appearance.
The piston ring end gap for the two different design intermediate piston rings is unique to its design and varies from each other. Refer to the chart below to determine the specifications to use when checking piston ring end gap for these engines. It should also be noted that the intermediate rings' inside bevel faces down from the top of the piston when correctly installed.
Page 1 of 2 This information is provided from the best available sources. However, AERA does not assume responsibility for data accuracy or consequences of its application. Members and others are not authorized to reproduce or distribute this material in any form, or issue it to their branches, divisions, or subsidiaries, etc. at a different location, without written permission.
? AERA Engine Builders Association. All rights reserved.
Location
Top Phosphate Coated Intermediate Chrome Faced Intermediate Oil
4.5L and 6.7L Engines Ring Gap
End Gap Specification
Minimum .012" (.300 MM)
Maximum .018" (.460 MM)
.032" (.820 MM)
.047" (1.180 MM)
.021" (.520 MM) .010" (.220 MM)
.034" (.880 MM) .023" (.580 MM)
Page 2 of 2
This information is provided from the best available sources. However, AERA does not assume responsibility for data accuracy or consequences of its application. Members and others are not authorized to reproduce or distribute this material in any form, or issue it to their branches, divisions, or subsidiaries, etc. at a different location, without written permission.
? AERA Engine Builders Association. All rights reserved.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- speed pro piston rings design features and
- check for proper ring end gap wiseco
- engine engine mechanical 5 7l 6 1 engine mechanical 5
- 2019 home piston rings manufacturer
- piston and ring manley performance
- ppppiiiissssttttoooonnnn rrrriiiinnnngggg iiiinnnns
- installation instructions for hypereutectic pistons
- mcculloch parts list cylinders pistons 1973
- calculating top ring end gap uem pistons
- piston ring clarification on cummins 4 5 6 7l b series
Related searches
- lesson 4 6 practice b answers
- measuring piston ring gap
- piston ring end gap specifications
- piston ring gap for nitrous
- setting piston ring end gap
- piston ring gap diagram
- mahle piston ring gap
- mahle piston ring installation
- piston ring gap specs
- piston ring catalog
- lesson 4 6 practice b geometry
- 4 6 practice b geometry answers