AutoDome Cameras



October 2012

|Americas |Europe, Middle East, Africa |Asia-Pacific |

|Bosch Security Systems, Inc. |Bosch Security Systems B.V. |Robert Bosch (SEA) Pte Ltd, Security Systems |

|130 Perinton Parkway |P.O. Box 80002 |11 Bishan Street 21 |

|Fairport, New York, 14450, |5600 JB Eindhoven, The Netherlands |Singapore 573943 |

|USA |Phone: + 31 40 2577 284 |Phone: +65 6571 2600 |

|Phone: + 1 800 289 0096 |Fax: +31 40 2577 330 |Fax: +65 6571 2698 |

|Fax: +1 585 223 9180 |emea.securitysystems@ |apr.securitysystems@ |

|security.sales@us. | | |

|boschsecurity.us | | |

Product Guide Specification

SECTION 28 23 29

VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS

BOSCH AUTODOME 800 SERIES HD PTZ CAMERA

– GENERAL

1. SUMMARY

A. Section Includes

1. Security Lighting

B. Related Sections

1. Section [28 23 13 – Video Surveillance Control and Management Systems].

2. Section [28 23 16 – Video Surveillance Monitoring and Supervisory Interfaces].

3. Section [28 23 19 – Digital Video Recorders and Analog Recording Devices].

4. Section [28 23 23 – Video Surveillance Systems Infrastructure].

**********Specifier’s note: Include those standards referenced elsewhere in this SECTION.

2. REFERENCES

A. Canadian Standards Association (CSA)

1. Complies with CSA standards.

B. European Norm

1. Complies with CE Electromagnetic Compatibility regulations

2. Complies with CE Product Safety regulations

3. Complies with EN Product Safety standards

4. Complies with EN 50130-4:1995 + A1:1998 + A2:2003 - Alarm Systems - Electromagnetic Compatibility - Product Family Standard: Immunity Requirements for Components Of Fire, Intruder And Social Alarm Systems.

C. Federal Communications Commission (FCC) ()

1. Complies with FCC Part 15.

D. HD standards

1. Complies with the SMPTE 274M-2008 Standard in:

a. Resolution: 1920x1080

b. Scan: Progressive

c. Color representation: complies with ITU-R BT.709

d. Aspect ratio: 16:9

e. Frame rate: 25 and 30 frames/s

2. Complies with the 296M-2001 Standard in:

a. Resolution: 1280x720

b. Scan: Progressive

c. Color representation: complies with ITU-R BT.709

d. Aspect ratio: 16:9

e. Frame rate: 25, 30, 50 and 60 frames/s

f. Interference-Causing Equipment Standards

E. Complies with ICES-003 regulations.

F. International Electrotechnical Commission (IEC)

1. Complies with IEC Product Safety standards

G. Underwriters Laboratories, Inc. (UL) ()

1. Complies with UL standards.

3. DEFINITIONS

A. Privacy Masking: The ability to mask out a specific area to prevent it from being viewed in order to comply with privacy laws and particular site requirements.

B. SensUp (sensitivity up): Increases camera sensitivity by increasing the integration time on the CCD (lowering shutter time from 1/50 to 1/5 s). This is accomplished by integrating the signal from a number of consecutive video fields to reduce signal noise.

C. Automatic Gain Control (AGC): a process by which gain is automatically adjusted as a function of input or other specified parameter.

D. Sensitivity: refers to the minimum level of light the CCD chip needs to generate an acceptable video picture, and is measured in lux.

4. SYSTEM DESCRIPTION

A. Section Includes

1. Video Surveillance Remote Devices

B. Performance Requirements

1. The HD PTZ camera shall be a full-featured HD PTZ unit designed for discrete video surveillance applications in indoor and outdoor environments.

2. The HD PTZ camera shall provide Intelligent Tracking to continuously track objects in motion.

3. The HD PTZ camera shall provide full HD 1080p and 720p resolutions.

4. The HD PTZ camera shall offer a Wide Dynamic Range of 86 dB for clear images in extreme high-contrast environments.

5. The HD PTZ camera shall provide direct network connection using H.264 and JPEG compression and bandwidth throttling to efficiently manage bandwidth and storage requirements while delivering outstanding image quality.

6. The HD PTZ camera shall offer embedded Intelligent Video Analysis (IVA) that eliminates dedicated PCs and associated software maintenance.

7. The HD PTZ camera shall conform to the ONVIF standard to provide interoperability with other conformant systems.

8. The HD PTZ camera shall generate multiple simultaneous video streams:

a. High Definition Streams:

1) [One (1) H.264 1080p30 or 720p60 stream plus one (1) I-frame stream plus one (1) M-JPEG simultaneously]

2) [One (1) independently configurable H.264 720p30 stream plus one (1) independently configurable H.264 Baseline Plus (BP+) or H.264 Main Profile Standard Definition (MP SD) plus one (1) I-frame plus one (1) M-JPEG video stream simultaneously]

b. Standard Definition Streams:

1) One (1) H.264 BP+ or H.264 MP SD stream plus one (1) H.264 BP+ or H.264 MP SD stream plus one (1) I-frame stream plus one (1) M-JPEG stream simultaneously

9. The HD PTZ camera shall be a high performance 1/2.8-in. progressive scan day/night CMOS sensor with up to 1920 x 1080 resolution.

10. The HD PTZ camera shall have an autofocus lens with 240x zoom

(20x optical/12x digital).

11. The HD PTZ camera shall have variable pan and tilt speeds, and autopivot capability for optimal camera control and viewing at all zoom levels.

12. The HD PTZ camera shall support 99 user-defined presets.

13. The HD PTZ camera shall offer IP66 environmental protection.

14. The HD PTZ camera housing shall be a durable, rugged design with an acrylic bubble.

5. SUBMITTALS

A. Submit under provisions of Section [01 33 00.]

B. Product Data:

1. Manufacturer’s data, user and installation manuals for all equipment and software programs including computer equipment and other equipment required for complete video management system.

C. Shop Drawings; include

1. System device locations on architectural floor plans.

2. Full Schematic of system, including wiring information for all devices.

D. Closeout Submittals

1. User manual.

2. Parts list.

3. System device locations on architectural floor plans.

4. Wiring and connection diagram.

5. Maintenance requirements.

6. QUALITY ASSURANCE

A. Manufacturer:

1. Minimum of [10] years experience in manufacture and design Video Surveillance Devices.

B. Video Surveillance System:

1. Listed by CSA.

2. Certified compliant to FCC and CE for the required loads. Test methods are in accordance with Industry Canada and the IEC. Provide evidence of compliance upon request.

C. Installer:

1. Minimum of [5] years experience installing Video Surveillance System.

7. DELIVERY, STORAGE AND HANDLING

A. Comply with requirements of Section 01 60 00.

B. Deliver materials in manufacture’s original, unopened, undamaged containers; and unharmed original identification labels.

C. Protect store materials from environmental and temperature conditions following manufacturer’s instructions.

D. Handle and operate products and systems according to manufacturer’s instructions.

E. Bosch provides off-the-shelf availability for our top selling products and same-day or 24-hour shipping.

8. WARRANTY

A. Provide manufacturer’s warranty covering 3 years for replacement and repair of defective equipment.

9. MAINTENANCE

A. Make ordering of new equipment for expansions, replacements, and spare parts available to dealers and end users.

B. Provide factory direct technical support from 8:00 a.m. to 8:00 p.m. via phone and e-mail.

– PRODUCTS

1. MANUFACTURERS

A. Acceptable Manufacturer:

[Bosch Security Systems, Inc.

130 Perinton Parkway

Fairport, New York, 1450, USA

Phone: + 1 800 289 0096

Fax: + 1 585 223 9180

security.sales@us.

boschsecurity.us]

[Bosch Security Systems B.V.

P.O. Box 80002

5600 JB Eindhoven, The Netherlands

Phone: + 31 40 2577 284

Fax: +31 40 2577 330

emea.securitysystems@

]

[Asia-Pacific

Robert Bosch (SEA) Pte Ltd, Security Systems

11 Bishan Street 21

Singapore 573943

Phone: +65 6571 2600

Fax: +65 6571 2698

apr.securitysystems@

]

B. Substitutions: [Not permitted.] [Under provisions of Division 1.]

1. [All proposed substitutions must be approved by the Architect or Engineer professional.]

2. [Proposed substitutions must provide a line-by-line compliance documentation.]

2. BOSCH AUTODOME 800 SERIES HD PTZ CAMERA SYSTEM [VG5-836-ECEV]

A. General Characteristics:

1. The HD PTZ camera shall provide a 1/2.8-in. type CMOS day/night camera with the following:

a. Up to 1920 x 1080 (NTSC/PAL) resolution.

b. Sensitivity to below 1.0 lux.

2. The HD PTZ camera shall provide direct network connection using H.264 and JPEG compression and bandwidth throttling to efficiently manage bandwidth and storage requirements while delivering outstanding image quality.

3. The HD PTZ camera shall offer a Wide Dynamic Range of 86 dB for clear images in extreme high-contrast environments.

4. The HD PTZ camera shall support the following tour modes:

a. 99 user-defined pre-positions with 20-character titles.

b. One (1) preset tour capable of 99 pre-positions and a configurable dwell time between positions.

c. One (1) AutoPan mode.

5. The HD PTZ camera shall provide pan and tilt preset repeatability accurate to within ±0.1 degrees.

6. The HD PTZ camera shall provide the following variable pan/tilt speeds

a. A range of 0.1 degrees per second to 120 degrees per second.

b. A pan speed of 360 degrees per second and a tilt speed of 100 degrees per second between prepositions.

7. The HD PTZ camera shall provide a tilt range of 0 to 94 degrees and a pan range of up to 360 degrees of continuous rotation.

8. The HD PTZ camera shall provide the patented Bosch AutoScaling (proportional zoom) and AutoPivot features.

9. The HD PTZ camera shall provide 16 independent sectors with 20-character titles/sector.

10. The HD PTZ camera shall provide 24 individual privacy masks with the following features:

a. Shapes shall be defined with four corners.

b. The mask shall be gray.

11. The HD PTZ camera shall be able to be mounted to a wall, mounted to a surface, mounted to a pipe, or recessed into an indoor ceiling.

12. The HD PTZ camera shall offer IP66 environmental protection.

13. The HD PTZ camera dome bubble shall:

a. Meet flame, crush, and impact resistant requirements able to exceed UL 746C standard for polymeric material enclosures.

b. Be a high-resolution bubble made of acrylic.

c. Offer a clear or tinted version.

14. The HD PTZ camera shall support the following languages:

a. Dutch

b. English

c. French

d. German

e. Italian

f. Japanese

g. Polish

h. Portuguese

i. Spanish

B. Basic Features:

1. The HD PTZ camera shall provide a feature that automatically rotates, or pivots, the camera to simplify tracking of a person walking directly under the camera.

2. The HD PTZ camera shall provide advanced troubleshooting and diagnostics via diagnostic LEDs and on-screen diagnostic displays.

3. The HD PTZ camera shall allow an optional integral fiber optic media converter transceiver module, capable of transmitting and receiving video and Biphase signals up to 60 km (37 miles).

4. The day/night IP PTZ camera shall be compatible with the Bosch Video Client and the Bosch Video Recording Manager.

C. Housing Options

1. The HD PTZ camera shall be offered with an Outdoor Pendant housing.

2. The HD PTZ camera housings shall come standard with recessed setscrews and a recessed bubble latch for increased tamper resistance.

3. The HD PTZ camera shall provide built-in surge protection for power, data, and video and alarm inputs.

4. [The Outdoor pendant housing shall:

a. Use a hinge, in-place of a tether, to make installation easier and safer.

b. Come with an attached sunshield.

c. Allow camera to view 18º above the horizon.

d. Conform to IP66 and NEMA 4X standards for a rugged and weather-resistant package.

e. Be made of cast aluminum for corrosion resistance, and supplied with a built-in heater/blower to provide an operating temperature range down to

–45°C to 55°C (–49°F to 131°F).

f. Use a low-impact, high-resolution acrylic bubble.

g. Allow removal of the sunshield for conversion to an indoor unit.]

D. HD Characteristics

1. The HD PTZ camera shall generate full HD 1080p resolution and 720p resolution using H.264 compression.

2. The camera shall generate multiple simultaneous video streams:

a. High Definition Streams:

1) [One (1) H.264 1080p30 or 720p60 stream plus one (1) I-frame stream plus one (1) M-JPEG simultaneously]

2) [One (1) independently configurable H.264 720p30 stream plus one (1) independently configurable H.264 Baseline Plus (BP+) or H.264 Main Profile Standard Definition (MP SD) plus one (1) I-frame plus one (1) M-JPEG video stream simultaneously]

b. Standard Definition Streams:

1) One (1) H.264 BP+ or H.264 MP SD stream plus one (1) H.264 BP+ or H.264 MP SD stream plus one (1) I-frame stream plus one (1) M-JPEG stream simultaneously

E. IP Connectivity

1. The HD PTZ camera shall allow full camera control and configuration capabilities over the network.

2. The HD PTZ camera shall be capable of capturing and storing images using H.264 compression at HD 1080p and HD 720p resolutions.

3. The HD PTZ camera shall deliver DVD-quality 1080p video, at rates up to 30 images per second, via TCP/IP over Cat5/Cat6 UTP cable.

4. The HD PTZ camera shall support iSCSI devices to allow the network-enabled camera to stream video directly to an iSCSI RAID array.

5. The HD PTZ camera shall conform to the ONVIF standard.

6. The HD PTZ camera shall conform to the NTCIP 1205 protocol.

7. The HD PTZ camera shall offer embedded Intelligent Video Analysis (IVA) that eliminates dedicated PCs and associated software maintenance.

F. Intelligent Video Analysis

1. The HD PTZ camera shall be capable of processing and analyzing video within the camera itself, with no extra hardware required.

2. The HD PTZ camera shall be capable of detecting and sending alarms for abnormal events.

3. The HD PTZ camera shall be configurable to analyze up to 10 different scenes for one or more of the following events: Line Crossing, Loitering, Idle Object, Removed Object, Conditional Change, Trajectory Tracking, and Filters.

4. The HD PTZ camera shall allow users to set up to 10 separate profiles and switch profiles based on a day/night or holiday schedules.

5. The HD PTZ camera shall support scene tours that automatically reposition the camera to each scene for a specified duration.

6. The HD PTZ camera shall incorporate an Alarm Rule Engine, enabling abnormal events that IVA detects to prompt the camera to take one or more actions such as:

a. Trigger a relay connected to an alarm siren and/or strobe

b. Trigger a visual alert to be displayed on the operator’s screen

c. Go to a specified scene (preset position)

G. Motion Tracking

1. The HD PTZ camera shall offer Intelligent Tracking to continuously track an object using pan, tilt, and zoom actions.

2. The HD PTZ camera shall provide automatic motion tracking using intelligent video analytics.

3. The HD PTZ camera shall have the ability to follow an object continually when passing behind a privacy mask.

4. The HD PTZ camera shall have the ability to restart tracking if a target starts moving in the same area where the initial target stopped moving or if the camera detects an object moving along the last known trajectory.

5. The HD PTZ camera shall allow an operator to select an object to track in the live image view.

H. Camera:

1. Imager: 1/2.8-inch type CMOS

2. Number of Pixels: Approximately 2 Megapixels

3. Aspect Ratio: HD: 16:9

4. Lens:

a. 20x optical zoom, f=4.7 to 94 mm

b. 12x digital zoom

5. Focus: Automatic (normal, low), One-push, Manual

6. Iris: Automatic with manual override (F1.6 to F3.5)

7. Field of View:

a. TELE end: 3°

b. WIDE end: 55°

8. Minimum Working Distance: 10 mm (wide) to 150 mm (tele)

9. Automatic Gain Control: Automatic/Manual (–3 to 28 dB, 21 steps)

10. Synchronization: Internal

11. Aperture correction:

12. Horizontal Resolution: 1920 pixels

13. Sensitivity (F1.6, maximum AGC. Normal light source – Halogen lamp)

a. 30 IRE (Tinted bubble adds 0.8 f-stop loss)

1) Day Mode

a) SensUP Off (1/30 [1/25] shutter); High Sensitivity Off: 0.8 lx

b) SensUP On, max. (0.25 sec. shutter); High Sensitivity On: 0.04 lx

2) Night Mode

a) SensUP Off (1/30 [1/25] shutter); High Sensitivity Off: 0.12 lx

b) SensUP On, max. (0.25 sec. shutter); High Sensitivity On: 0.005 lx

b. 50 IRE (Tinted bubble adds 0.8 f-stop loss)

1) Day Mode

a) SensUP Off (1/30 [1/25] shutter); High Sensitivity Off: 1.7 lx

b) SensUP On, max. (0.25 sec. shutter); High Sensitivity On: 0.08 lx

2) Night Mode

a) SensUP Off (1/30 [1/25] shutter); High Sensitivity Off: 0.3 lx

b) SensUP On, max. (0.25 sec. shutter); High Sensitivity On: 0.011 lx

14. Electronic Shutter Speed (AES): 1/1 to 1/10000 s, 21 steps

15. Wide Dynamic Range: 86 dB

16. Signal-to-Noise Ratio: > 50 dB (AGC off)

17. Backlight Compensation: On/Off

18. White Balance: ATW, Indoor, Outdoor, AWB Hold, Extended ATW, Manual

19. Day/Night: Monochrome, Color, Auto

I. IP Video

1. Standards: H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG

2. Streaming: Multiple individually configurable streams in H.264 and JPEG, configurable frame rate and bandwidth:

a. One (1) H.264 1080p30 or 720p60 stream plus one M-JPEG and one I-frame stream simultaneously.

b. One (1) independently configurable H.264 720p30 stream and one (1) independently configurable H.264 Baseline Plus (BP+) or H.264 Main Profile Standard Definition (MP SD)

c. Two (2) independently configurable H.264 streams:

1) One (1) H.264 720p30 stream,

2) One (1) H.264 BP+ or H.264 MP SD stream,

3) plus one (1) M JPEG and one (1) I-frame stream

d. Two (2) independently configurable standard definition H.264 streams:

1) One (1) H.264 BP+ or H.264 MP SD stream,

2) One (1) H.264 BP+ or H.264 MP SD stream,

3) plus one (1) M JPEG and one (1) I-frame stream

3. GOP Structure: IP, IBP, IBBP

4. Data Rate: 9.6 kbps to 6 Mbps

5. Overall IP delay: 240 ms

6. Aspect Ratio: 16:9

7. Resolution

a. Stream 1 (High Definition):

1) Full HD/1080p: 1920 x 1080, 30 ips

2) HD/720p: 1280 x 720, 60 ips

3) HD/720p: 1280 x 720, 30 ips

b. Stream 2 (Standard Definition - 50/60 Hz):

1) SD/480p (WVGA): 854 x 480, 30 ips

2) SD/240p (WQVGA): 432 x 240, 30 ips

J. Network

1. Protocols: RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP, RTSP, 802.1x, iSCSI, DynDNS, UPnP

2. Ethernet: 10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45

3. NTCIP:

a. CCTV Camera Control: NTCIP 1205

b. Application Layer: SNMP per NTCIP 1101:1996 & NTCIP 2301

c. Transport/Network Layers: TCP/IP per NTCIP 2202:2001

d. Sub-network Layer: PMPP (Point to Multi-Point Protocol) per NTCIP 2101:2001 & NTCIP 2102:2003

4. Audio

a. Standard: G.711, 8 kHz sampling rate, L16, 16 kHz sampling rate

b. Signal-to-Noise Ratio: >50 dB

c. Audio Streaming: Full Duplex / Half Duplex

K. Electrical

1. Rated Voltage:

a. Camera, all models: 24 VAC ± 10%, 50/60 Hz

b. Heater, outdoor pendant: 24 VAC ± 10%, 50/60 Hz

2. Power Draw (typical):

a. [Indoor Pendant: 19 W / 35 VA (without heater connected in power supply box.)]

b. [Outdoor Pendant: 55 W / 60 VA]

L. Mechanical

1. Pan Range: 0 to 360° continuous

2. Tilt Angle: 18° above horizon

3. Variable Speed: 0.1°/s to 120°/s

4. Pre-position Speed:

a. Pan: 360°/s

b. Tilt: 100°/s

5. Preset Accuracy: ± 0.1° typical

M. Environmental:

1. Design Rating

a. Pendant, all models: IP66, NEMA 4X

2. Operating Temperature:

a. [Indoor Pendant: –10°C to 40°C (14°F to 104°F)]

b. [Outdoor Pendant: –40°C to 50°C (–40°F to 122°F)]

3. HALT Temperature Tests, Indoor and Outdoor Pendants:

–70°C to 70°C (–94°F to 158°F)

4. Storage Temperature:

a. [Indoor Pendant: –45°C to 70°C (–49°F to 158°F)]

b. [Outdoor Pendant: –45°C to 70°C (–49°F to 158°F)]

5. Operating Humidity:

a. [Indoor Pendant: 0% to 90% relative, non-condensing]

b. [Outdoor Pendant: 0% to 100% relative, non-condensing]

N. Miscellaneous

1. Sectors/Titling: 16 independent sectors with 20-character titles/sector

2. Masking: 24 individually configurable

3. Protocol Support: Bosch (OSRD), ONVIF

4. Pre-positions: 99, each with 20-character titles

5. Preset Tours: One (1) consisting of up to 99 scenes, consecutively

6. Supported Languages: Chinese, Dutch, English, German, French, Italian, Japanese, Portuguese, Polish, Russian, and Spanish

O. User Connections:

1. Power

a. Camera, all models: 21-30 VAC, 50/60 Hz

b. Heater, outdoor pendant: 21-30 VAC, 50/60 Hz

2. Video and Control: RJ-45 100 Base-TX Ethernet

3. Alarm Input (2): NC/NO

4. Alarm Output: Open collector NPN, 32 VDC @ 150 mA, maximum

5. Audio Input Line Level (one way audio)

a. Input Voltage: 5.5 Vp-p max

b. Impedance: 9 Kohm typical

P. Construction

1. Weight

a. [Indoor Pendant: 2.88 kg (6.3 lb)]

b. [Outdoor Pendant: 3.03 kg (6.68 lb)]

2. Construction Material

a. Housing: Cast aluminum

b. Bubble: Acrylic (high-resolution)

3. Bubble Size: 153.1 mm (6.03 in.)

4. Standard Color: White (RAL9003)

5. Standard Finish: Powder coated, sand finish

3. ACCESSORIES

A. Bubbles

1. Bosch VGA-BUBBLE-PCLA Clear high-resolution acrylic

2. Bosch VGA-BUBBLE-PTIA Tinted high-resolution acrylic

B. Mounts

1. Bosch VGA-ROOF-MOUNT Roof mount, white

2. Bosch VG4-A-9543 Pipe mount, white

3. Bosch VG4-A-PA0 Pendant arm mount 24 VAC, white

4. Bosch VG4-A-PA1 Pendant arm mount with 120 VAC transformer, white

5. Bosch VG4-A-PA2 Pendant arm mount with 230 VAC transformer, white

6. Bosch VGA-PEND-ARM Pendant arm without power supply box, white

7. Bosch VGA-PEND-WPLATE Pendant arm mounting plate for use with

VGA-PEND-ARM, white

8. Bosch VG4-A-TSKIRT Trim skirt for AutoDome power supply box, white

9. Optional Mounting Accessories

a. For Roof Mounts

1) Bosch LTC 9230/01Flat Roof Adapter for Parapet Mount

b. For Arm Mounts

1) Bosch VG4-A-9542 Corner Mounting Plate

2) Bosch VG4-A-9541 Mast (Pole) Mounting Plate

C. Power Supplies

1. Bosch VG4-A-PSU0 Outdoor Power Supply Box, no transformer

2. Bosch VG4-A-PSU1 / VG4-A-PSU2 Outdoor Power Supply Box (120/230 VAC Transformer)

D. Bosch VG4-SFPSCKT Fiber Optic Ethernet Media Converter Kit

– EXECUTION

1. EXAMINATION

A. Examine areas to receive devices and notify adverse conditions affecting installation or subsequent operation.

B. Do not begin installation until unacceptable conditions are corrected.

2. PREPARATION

A. Protect devices from damage during construction.

3. INSTALLATION

A. Install devices in accordance with manufacturer’s instruction at locations indicated on the floor drawings plans.

B. Perform installation with qualified service personnel.

C. Install devices in accordance with the National Electrical Code or applicable local codes.

D. Ensure selected location is secure and offers protection from accidental damage.

E. Location must provide reasonable temperature and humidity conditions, free from sources of electrical and electromagnetic interference.

4. FIELD QUALITY CONTROL

A. Test snugness of mounting screws of all installed equipment.

B. Test proper operation of all video system devices.

C. Determine and report all problems to the manufacturer’s customer service department.

5. ADJUSTING

A. Make proper adjustment to video system devices for correct operation in accordance with manufacturer’s instructions.

B. Make any adjustment of camera settings to comply with specific customer’s need.

6. DEMOSTRATION

A. Demonstrate at final inspection that video management system and devices functions properly.

END OF SECTION

-----------------------

Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, based on MasterFormat 2004 and The Project Resource Manual—CSI Manual of Practice. The Manufacturer is responsible for technical accuracy.

The section must be carefully reviewed and edited by the Architect or Engineer to meet the requirements of the project and local building code. Words and sentences within brackets [ ] are choices to include or exclude a particular item or statement. Coordinate this section with other specification sections and the Drawings. Delete all “Specifier Notes” after editing this section.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download